0 évaluation0% ont trouvé ce document utile (0 vote)
29 vues1 page
This document provides specifications for 10% torical dished ends for pressure vessels with the following key details:
- The ends have an inner radius (Ri) less than or equal to the outer diameter (Di) and an inner radius (ri) of at least 10% of Di.
- Diameters range from 400mm to 6000mm with corresponding dimensions for Ri, ri, thickness, height (hi) and volume.
- hi and volume are theoretical values for guidance only and Ri may vary slightly on spun heads. Volumes and heights do not include straight flanges, which are available up to 75mm depending on material thickness.
This document provides specifications for 10% torical dished ends for pressure vessels with the following key details:
- The ends have an inner radius (Ri) less than or equal to the outer diameter (Di) and an inner radius (ri) of at least 10% of Di.
- Diameters range from 400mm to 6000mm with corresponding dimensions for Ri, ri, thickness, height (hi) and volume.
- hi and volume are theoretical values for guidance only and Ri may vary slightly on spun heads. Volumes and heights do not include straight flanges, which are available up to 75mm depending on material thickness.
This document provides specifications for 10% torical dished ends for pressure vessels with the following key details:
- The ends have an inner radius (Ri) less than or equal to the outer diameter (Di) and an inner radius (ri) of at least 10% of Di.
- Diameters range from 400mm to 6000mm with corresponding dimensions for Ri, ri, thickness, height (hi) and volume.
- hi and volume are theoretical values for guidance only and Ri may vary slightly on spun heads. Volumes and heights do not include straight flanges, which are available up to 75mm depending on material thickness.
hi and vol are theoretical and given for guidance only. Ri will vary slightly on spun heads. Volumes & heights do not include straight flange. Straight flange available up to a maximum of 75mm, depedent on material thickness.