Académique Documents
Professionnel Documents
Culture Documents
INSTRUCTIONS TO CANDIDATES
2. Answer ONLY ONE (1) question in a maximum group of four (4) members and prepare a
short report. Your report should be included a full program complete with comment,
hardware circuit (electronic circuit diagram), description of result and a conclusion.
Attention for everyone! Please read carefully all instructions in this question sheet.
Otherwise, you will lose your marks.
Instructions:
Mini Project (Group)
1. Please prepare a video that capture you are doing your presentation. Save the video in your
groups CD. Dont forget to show your final result.
2. Please prepare a report that contains as instructed in front page. Submit a softcopy and
hardcopy to your lecturer.
3. During submission, you have to demo to your lecturer.
4. Please submit the checklist.
Checklist
Project No. :
Submission Lists:
Available/not
Softcopy (CD) Slide Show
Video
Short report
Full program
Hardware
connection
Hardcopy Short report
PROJECT EVALUATION
TOTAL=X
= 30%
100
=
1. Digital timer/clock
Design a digital timer display controlled by 68HCS12. The inputs consist of 2 push buttons,
START and STOP. The count display has for digits, 2 for minutes and 2 for seconds, which
allows timing to one hour (60 minutes). Seven-segment is used to display the digits. When the
START button is pressed, the count sequence begins with (00:00) and ends with (60:00), after
which it cycles back to (00:00). If the STOP is button is pressed, it will stop counting.
Design a system that would able to assist a mobile driver to observe mobile speed and to indicate
mobiles gear shift controlled by 68HCS12.
1st gear
2nd gear
3rd gear
4th gear
Gears ratio
1st gear 0 20
2nd gear 20 40
3rd gear 40 60
Design a traffic controller system to assist traffic in 3 junction road. The lights pattern sequence
and duration should imitate the real traffic light system.
Junction 1
Red
Yellow
Green
Junction 2
Red
Yellow
Green
Junction 3
Red
Yellow
Green
4. Dancing lights
Design three patterns of dancing lights controlled by 68HCS12 microcontroller. The user can
choose the pattern by using DIP switch.
DIP switch1
DIP switch2
DIP switch3
Output Port