Académique Documents
Professionnel Documents
Culture Documents
Back to Ametek
The JOFRA ATC series combines the accuracy of a laboratory calibrator with the
speed and portability of a dry-block calibrator. The series features the new dual-
zone heating/cooling block to ensure the thermal performance in the calibration
zone independent of the load.
Return
Return
The JOFRA CTC series of dry-block calibrators has been designed for much easier true
temperature calibration in the field, leading to reliable results. The simple operation and the
automatic functions have been carefully selected for ease of use. This has resulted in a fast,
simple and efficient temperature calibrator without compromising quality. Reach 320C / 608F
in just 4 minutes
Interchangeable inserts
Multi-hole insertion tubes
MVI Mains Variance Immunity
Automatic switch test
RS 232 and calibration software
Multi information display
Safty banana bushings
Auto stepping
Stability indicator
Count down timer (shows when unit is stable)
Programmable maximum temperature
Fast simulation/training mode
Re-calibration from keyboard
Return
The JOFRA ETC 400A heats up by up to 100C / 212F per minute and
completes a full dual-point test in less than 10 minutes, including stability time;
timesavings at your fingertips!
The JOFRA ETC series is designed for field testing of temperature
measurement devices. The small size and light weight make it a perfect
instrument to verify sensors in difficult to reach places.
The JOFRA ETC 400R is designed for fast and reliable calibration of infrared
thermometers.
All JOFRA ETC units have many of the same useful and timesaving features as
the more advanced JOFRA dry-block series.
Return
The ETM-2000 series consists of 5 different systems and covers a broad variety of
temperature applications. The series has 3 systems for thermocouples and 2 for
Pt100 sensors. Both Pt100 models have IP67 (water proof) density, which make
them well-suited for use in dairy wet rooms, slaughterhouses, and similar food
environments. 3 of the 5 systems have a 'SpeedRead' function, which calculates the
temperature after just 14 seconds in the medium, a great timesaving feature when
measuring granulates, powders, and atmospheres. Data logging is an option in the
Pt100 system as well as in the thermo element system. Results are shown on the
display or on a PC.
Temperature Calibrators
Click Here For A Quote
JOFRA DTI-1000 REFERENCE THERMOMETER
A rugged handheld battery operated thermometer for lab and field use
The JOFRA DTI-1000 is a battery-operated portable reference thermometer. Use the DTI-
1000 wherever you have a demand for reliable and accurate temperature measurements.
The rugged design and the battery operation make it ideal for use in laboratories or in the
field. The DTI-1000 has proven its performance and reliability through years of trouble-free
operation in many national laboratories all over the world.
PPC and PPCE series are portable, self-contained precision instruments designed for
critical process applications where accuracy, flexibility, and quality cannot be
compromised.
The AMETEK CalPal is a popular and easy to use digital pressure calibrator. The unit is available as
an indicator or as a complete system. All systems are delivered complete with an AMETEK hand held
pump and a carrying case. The pressure ranges are 0.7, 2 or 14 bar (10, 30 or 200 psi). Accuracy
including linearity, hysteresis and repeatability is better than 0.1% of full scale.
Pressure Testers
VP hand pump
Scissor hand pump for pressure from vacuum to 15 bar (200 psi). Dual pressure output,
fine adjustment and release valve. Max. pressure setting
Deadweight Testers
Accurate up to 0.015%
of indicated reading, this primary standard is ideal for pressure ranges from 1 to 300
psi (0.01 to 20 bar) and provides for incremental pressures down to only 0.1 psi (1
mbar). Available in seven different engineering units: inH2O, psi, kPa, cmH2O, inHg,
bar and kg/cm2. Features a cast metal base with quick levelling for field or laboratory
use. Also operates with cover closed.
MODEL PK ll
Low pressure tester, portable and ideal for field or laboratory use. The PK II tester is
used for low pressure applications up to 30 psi (2 bar). Available in 7 engineering
units: psi, g/cm2, kPa, bar, inH2O, cmH2O, and mmHg. This industry standard has
an accuracy of up to 0.015% of reading. Housed in a rugged case made for 'closed
case' operation to protect from wind conditions. The tester base includes a built-in
mounting for optional tripod use. Also available for medical applications ready for use
with Oxygen.
MODEL HK
High pressure tester for high pressure applications up to 1,500 psi (100 bar),
AMETEK HK series testers operate in the same easy manner as the Model PK II and
RK testers. HK testers feature an accuracy up to 0.025% and a repeatability of up
to 0.005% of reading. Available in psi, kg/cm2, kPa and bar engineering units.
Return To Top
These high accuracy deadweight testers are ideal for laboratory or field use. The
type T tester uses distilled water or fluid compatible with 300 series stainless steel
and MONEL (including AAA tester oil). For applications up to 15,000 psi (1,000 bar).
An optional dual piston lets you interchange piston/cylinder assemblies to extend the
pressure measurement range using the same weight set. A kit is available for
converting to a dual column tester.
DUAL COLUMN
Separate columns are provided for high and low pressure measuring piston/ cylinder
assemblies. Range changes are achieved using a built-in crossover valve that allows
three-point calibrations to be performed in seconds. It is not necessary to purchase a
second set of weights. Fill fluids and pressure ranges are the same as type T single
column testers.
Return To Top
Click Here For A Quote
DADT DIGITAL ACCESSORIES
Improve the performance of your deadweight tester
This pre-programmed, intrinsically safe accessory corrects for ambient conditions and
inherent errors associated with any hydraulic or pneumatic deadweight tester application. It
uses actual values rather than nominal values to correct for the specific gravity of location,
masses of the weights, weight set buoyancy in the air, relative humidity, and temperature
effects. Eliminates most errors by calculating the NIST formula provided by Test III data.
Features fifteen engineering units with automatic conversion. Lets you use a psi tester for
H2O calibrations.
Return To Top
Signal Calibrators
ModCal II
The Complete Instrument Shop in a Box
The JOFRA MLC multi loop calibrator offers a wide choice of measuring, simulation
and calibration combinations including autostepping, ramping, transmitter calibration,
scaling, selectable standards, cold junction compensation, loop testing and more.