Académique Documents
Professionnel Documents
Culture Documents
CHEMISTRY
14. The mass of proton is ____ heavier than the mass of electron
1836
28. The ratio of universal gas constant to Avogadros number is called _______.
BOLTZMANNS CONSTANT
42. The 14 elements in the period 7 of the periodic table are called ______.
ACTINIDES
63. Hydrogen is in the ground state when its electron is in the ______ orbit.
INNERMOST
64. Alkali metals react strongly with water to produce what gas?
HYDROGEN GAS
65. What is the reason why alkali metals are protected from water, air, and most other substances?
BECAUSE ALKALI METALS ARE EXTREMELY REACTIVE
68. What halogen is bluish-black solid that gives off purple fumes when heated?
IODINE
78. The gas produced by the acts of the sun on automobile exhaust.
OZONE
81. When solid has a crystalline structure, the atoms arranged in repeating structure are called
UNIT CELL
86. What is the term used for expressing concentration of very dilute concentrations?
PARTS PER MILLION (ppm)
93. ___ are motions of small particles that are bombarded by molecules.
BROWNIAN MOVEMENT
97. What refers to a crystal imperfection characterized by regions of severe atomic misfit where
atoms are not properly surrounded by neighbor atoms
DISLOCATION
99. A representation that shows the electron in the outermost energy level
ELECTRON DOT
105. What determines the ability of atoms to combine with other atoms?
VALENCE ELECTRON
109. An atom with more or less number than the normal number of electron
ION
112. What is the difference between the kinetic energy of the electron and the electrostatic
potential energy of the electron-nucleus combination?
BINDING ENERGY
113. When it comes to size, cations are ___ their parent atom
SMALLER THAN
126. Emitted when an electron moves from a higher energy orbit to a lower energy orbit
PHOTON
STOICHIOMETRY
128. Formula in chemistry that indicates the total number of atoms of the elements in a
compound
MOLECULAR FORMULA
135. In HCl molecule, the atoms are formed are formed by________
POLAR COVALENT
143. The change in phase from the gaseous state to the liquid state
CONDENSATION
146. Refers to the characteristic of a liquid in which on boiling upon evaporation contains the
same mixture as in its liquid state is known as __________ mixture
AZEOTROPIC
147. What is the amount of heat absorbed by a substance to change from liquid to gas?
HEAT OF VAPORIZATION
149. What is the amount of heat needed to turn 1000g of the substance at its melting point
from solid to liquid state
HEAT OF FUSION
150. ???
LATENT HEAT OF FUSION
151. Small nuclei combine to form medium, stable nuclei. This is called ____ process
FUSION
152. The shell that has the maximum number of electrons is the
N SHELL
156. What quantum number defines the magnitude of the electrons angular momentum
vector?
AZIMUTHAL QUANTUM NUMBER
158. The integer which determines the angular momentum. in one direction.
MAGNETIC QUANTUM NUMBER
159. What quantum number defines the direction of electrons angular momentum vector?
MAGNETIC QUANTUM NUMBER
160. The number that refers to the spin angular momentum of an vector
SPIN QUANTUM NUMBER
161. Quantum number that defines the spin angular momentum vector
SPIN QUANTUM NUMBER
165. A substance which changes the rate of a reaction without taking part in the chemical
reaction itself.
CATALYST
167. What decay decreases two protons and neutrons and make stable element?
ALPHA DECAY
175. Refers the apparatus that carry out electrolytic plate is____________
ELECTROLYTIC CELL
178. To reduce the CO in the atmosphere, the usage of _____ must be reduced
OIL AND COALS
181. The process of putting two materials into a closed association and then separating them
to form the above effects is called ______.
ELECTRIFICATION
188. This is a phenomenon wherein a material is slightly repelled by a magnet due to the
presence of paired electrons
DIAMAGNETISM
189. Line drawn in the surface of the earth with equal magnetic declination
ISOGONIC LINE
191. Temporarily changes occur in atoms of certain substances under the influence of light
PHOTOELECTRIC EFFECT
192. What is the natural defect in ion lattices with two ion vacancies? (one cation and one
anion)
SCHOTTKY EFFECT
193. In, _______ gas contains many tiny molecules that interact only with each other during
collision
KINETIC THEORY OF GAS
194. Masses of elements in a pure compound are always in the same proportion.
LAW OF DEFINITE PROPORTION
195. Equal volumes of ideal or perfect gases, at the same temperature and pressure contain
the same number of particles or molecules. This is called ___.
AVOGADROS LAW
196. The partial pressure of the solvent over a solution is given by the product of the vapor
pressure of the pure solvent and the mole fraction of the solvent in the solution.
RAOULTS LAW
197. All mater radiates energy, regardless of what is their temperature. This statement
is_____
STEFAN BOLTZMANS LAW
198. Electric flux through a closed surface is proportional to the sum of electric charges
within a closed surface.
GAUSS LAW
199. Electrical sensitivity equal to sum of thermal resistivity and residual resistivity
MATTHIESSENS RULE
200. For a set of equal energy orbitals , each orbital is occupied by 1 electron before any
orbital has 2 electrons.
HUNDS RULE
201. When electrons enter a sublevel containing more than one orbital, they will spread out
over the available orbitals with their spins in the same direction before they pair up with
opposite spins.
202. Impossibility of locating a particle to its exact location and its velocity
UNCERTAINTY PRINCIPLE
203. What principle states about the fundamental limitation that, for a particle as small as
the electron, one cannot know exactly where it is and at the same time know its energy
or how it is moving?
a. Aufbau principle
B. UNCERTAINTY PRINCIPLE
c. Pauli exclusion principle
d. Kinetic molecular theory
204. What principle states that the electrons fill the orbitals, one at a time, starting with the
lowest energy orbital then proceeding to the one with higher energy?
A. AUFBAU PRINCIPLE
b. Uncertainty principle
c. Pauli exclusion principle
d. Kinetic molecular theory
205. What principle states that no two electrons in the same atom can have the same set of
four quantum numbers?
a. Aufbau principle
b. Uncertainty principle
C. PAULI EXCLUSION PRINCIPLE
d. Kinetic molecular theory
PHYSICS
4. _______ is the net force that will give a mass of 1kg an acceleration of 1m/s^2
NEWTON
6. _______ is the force that will give a mass of 1 gram an acceleration upon of 1 centimeter per
second second
DYNE
10. 1 joule
10^7 ergs
32. A part of the total energy radiated per unit time --- --- capable of producing sensible element of
sight
LUMINOUS FLUX
33. What refers to the total amount of visible light given off by a light source?
LUMINOUS FLUX
36. Amount of heat flowing per unit time in steady state condition per unit area
THERMAL CONDUCTIVITY
38. What is the ratio of the thickness of the material to the thermal conductivity?
THERMAL RESISTANCE
39. The ratio between the actual vapor pressure to the saturated vapor pressure
RELATIVE HUMIDITY
42. ___ is the mass of water vapor per unit volume of air.
ABSOLUTE HUMIDITY
45. Reluctance of an object to change its state of rest or its uniform motion
INERTIA
46. Ratio of the velocity of light in a vacuum over the velocity of another material
REFRACTIVE INDEX
48. Reaction force of motion which is equal in magnitude with the centripetal force but acts in
opposite direction.
CENTRIFUGAL FORCE
50. The resultant from the third axis is the geometrical addition of their angular velocities from two
different axis.
PRECESSION
51. When the net torque acting on an object is zero, the object is in _____ equilibrium.
ROTATIONAL
52. When the vector sum acting on an object is zero, the object is in _____ equilibrium.
TRANSLATIONAL
54. Gravity
CONSERVATIVE FORCE
58. Electromagnetic radiation of very short wavelength emitted from the nucleus of radioactive
atom.
GAMMA RAY
60. Part of the electromagnetic spectrum that is used for sterilizing food, analyzing atomic structure
and invisible labeling
ULTRAVIOLET
64. Refers to the ratio of the speed of light in an empty space to the speed of light in a medium
a. Relative Index of refraction
b. Total Index of refraction
C. ABSOLUTE INDEX OF REFRACTION
d. Critical Index of Refraction
DIFFUSION
70. ___ is heat transfer from molecule to molecule through a body or through bodies in contact.
CONDUCTION
71. The rotational motion within fluid mass that is brought about by the temperature gradient is
called ______.
CONVECTION
72. What is the transfer of energy between a solid surface and the adjacent fluid that is in motion
and it involves the combined effects of conduction and fluid motion?
CONVECTION
75. Color that can describe other color and when mix form new color
PRIMARY COLOR
82. The part of the shadow where all light are excluded
UMBRA
19 | Southern Luzon State University
[GEAS COACHING 1] September 4, 2012
84. Ratio of the energy of the reflected to incident light from a dielectric
REFLECTANCE
89. An image created by actual intersection of light rays when they are refracted by a lens
REAL IMAGE
90. What image is formed when the rays actually passed the image after refraction?
REAL IMAGE
91. In converging (lens or mirror?), when image is farther from the mirror the image is
REAL
97. Ratio of the size of the image to the size of the object.
LINEAR OF MAGNIFICATION
98. Rays passing the edge of lens that are brought to a focus at a different point from those that
pass through the center
20 | Southern Luzon State University
[GEAS COACHING 1] September 4, 2012
SPHERICAL ABERRATION
99. In spherical mirror, not all rays parallel to the principal axis of a spherical mirror are reflected to
a focus. The rays farther from the axis are reflected to cross the axis nearer to the mirror than
those close to the axis. What do you call this imperfection?
a. Optical Illusion
b. Optical Aberration
C. SPHERICAL ABERRATION
d. Reflection Error
102. The lens corrected for defects as spherical aberration, astigmatism, chrominal
aberration is a/an ______ lens.
ANASTIGMATIC
107. The logarithm of the ratio of the Intensity of sound over the arbitrary intensity of other
material
INTENSITY LEVEL
108. Sources with slightly different frequencies that produced at the same time
BEAT
110. The sound produced by the matter which vibrates in natural fashion.
MUSICAL TONE
118. A type of collision where energy is loss in heat and sound energy
INELASTIC COLLISION
119. ___ is a collision of two bodies in which only the momentum is conserved but not the
kinetic energy.
INELASTIC COLLISION
121. Refers to the fundamentals and tones whose frequencies are whole number multiples of
the fundamental.
HARMONICS
127. What refers to an oscillatory motion that occurs whenever a restoring force acts on a
body in the opposite direction to its displacement from its equilibrium position
SIMPLE HARMONIC MOTION
128. In simple harmonic motion, speed is maximum when the distance from the equilibrium
is
ZERO
129. In simple harmonic motion, the displacement of the object is always proportional to the
position and the _____ is always directed towards equilibrium
ACCELERATION
130. It is doubled when the amplitude of the simple harmonic oscillator is doubled
MAXIMUM SPEED
133. The ___ of a simple harmonic motion is equal to the number of oscillations
FREQUENCY
134. For a body with uniform circular motion, the time needed to complete one orbit
PERIOD
136. When the vector sum of the external forces acting on a system of particles equals zero,
the total linear momentum of the system remains constant. This statement is known
as_______
CONSERVATION OF LINEAR MOMENTUM
140. What will happen to the volume of the system if the pressure is doubled while the
temperature remains constant?
VOLTAGE WILL DECREASE
23 | Southern Luzon State University
[GEAS COACHING 1] September 4, 2012
141. In constant pressure, the volume of a sample of a gas is directly proportional to the
absolute temperature. This is called _______.
CHARLES LAW
144. When an object exerts a force on an object, the second object exerts on the first a force
of the same magnitude but in opposite direction.
THIRD LAW OF MOTION
146. The buoyant force of a body immersed in a fluid exerts on a body in it is equal to the
weight of the fluid the body displaces.
ARCHIMEDES PRINCIPLE
147. Every point on the wavefront can be considered as a source of secondary wavelets that
spread out in all directions with the wave speed of the medium. The wavefront at any
time is the envelope if these wavelets.
HUYGENS PRINCIPLE
148. External pressure exerted on fluid uniformly throughout the volume of the fluid.
PASCALS PRINCIPLE
149. What principle states that for a horizontal flow of a fluid through a pipe, the sum of the
pressure and the kinetic energy per unit volume of the fluid is constant?
a. Pascals Law
b. Archimedes Principle
c. Boyless law
D. BERNOULLIS PRINCIPLE
151. The theory that states that matter can be converted into energy and vice versa
EINSTEINS THEORY
156. ???
WATER ABSORPTION
157. ???
SURFACE TENSION
158. ???
BODY POTENTIAL
THERMODYNAMICS
1. If two thermodynamic systems are separately in thermal equilibrium with a third, they are also
in thermal equilibrium with each other.
ZEROTH LAW OF THERMODYNAMICS
8. ______ system that interchange matter between the system and surrounding
OPEN
9. ______ system that loss or gain matter by working and not in heating or cooling.
ADIBIATIC
25 | Southern Luzon State University
[GEAS COACHING 1] September 4, 2012
13. The transit of energy among two masses that occurs because of the difference of temperature
among the two
HEAT
16. A gas consisting of infinitely small molecules that exerts no force on each other is called _____
gas.
IDEAL
17. The higher the thermal conductivity, the ______ heat transfer.
FASTER
24. What is the ratio of actual mechanical advantage to the ideal mechanical advantage?
EFFICIENCY
25. Actual mechanical advantage is the ratio of resistance force to ___ force
EFFORT
26. The amount of heat given off by a hot body is equal to the heat received by a cold body. This is
known as ___.
HEAT EXCHANGE
27. A device where two moving fluid streams exchange heat without mixing
HEAT EXCHANGER
ENGINEERING MECHANICS
1. The resultant of a planar concurrent force system will have the same moment as the sum of
the moment of each force. This statement is known as ________.
a. Mohrs Theorem
b. Varignons Theorem
c. Parallellogram Law of forces
d. Maxwells Theorem
STRENGTH OF MATERIALS
2. Some of individual moment about a point caused by multiple concurrent forces equal to
moment of resultant force of same point
VETERSON THEOREM
3. ___ is the angular change between two perpendicular faces of a different element.
SHEARING STRAIN
ENGINEERING MATERIALS
ATOM
4. What physical property of a material that refers to the point at which a material liquefies on
heating or solidifies on cooling?
MELTING POINT
5. Physical property of a material that refers to the temperature at which ferromagnetic materials
can no longer ne magnetized by an outside force
CURIE POINT
6. What refers to the ratio of the ultimate strength of a material to its specific weight?
a. yield strength
B. SPECIFIC STRENGTH
c. specific strain
d. specific stress
10. The maximum potential difference that an insulting material of a given thickness can withstand
for a specified time without occurrence of electrical breakdown
DIELECTRIC STRENGTH
13. The substance that has the highest bulk modulus at room temperature
OIL
SECANT MODULUS
21. Discovered the 1905, gave rise to the modern plastic industry
BAKELITE
22. Plastic
POLYMER
23. What are composed of one or more non-metallic elements combined with metallic elements
CERAMICS
26. An alloy of tin and lead are melted in low temperature and used to join materials
SOLDER
ZINC
34. Brass is an alloy of copper which contain less than 20% of ______.
ZINC
37. Nichrome alloy is part nickel and _______ chromium and high resistance.
15 to 20 %
38. Constantan is an alloy of nickel consisting of ____ % of copper and used as thermocouple
40 TO 60
40. The process of controlled heating and cooling that is used to modify the characteristic of a
material is called ____________
ANNEALING
ENGINEERING ECONOMY
1. If the compounding of the interest is annual, then the given rate in the problem is ________.
EFFECTIVE RATE
ENGINEERING MANAGEMENT
2. CPM
CRITICAL PATH METHOD
4. Defined as the proper upkeep of electronics systems and equipment so maximum safety and
meet grade of service.
MAINTENANCE
5. Production happens when a small number of products are processed at each storage before
going to the next stage of production.
JOB PRODUCTION
6. Process of producing, fabricating, forming or creating electronic equipment and related device,
component etc.
MANUFACTURING
8. Process of determining the contribution that subunits can make with allocated resources
INTERMEDIATE PLANNING
10. The most effective organization used in small firms or single business firms.
FUNCTIONAL ORGANIZATION
12. What refers to the act of conceptualizing, planning and projecting scheme, system and facility
using the arts and science of electronics along with social, economic, financial and technical
consideration?
DESIGN SERVICE
3. What is the act of giving advice and information to client in the area of electronics engineering
and its related fields in line with current internationally accepted standards and practices?
a. Consultancy design
b. Professional consultation
C. ENGINEERING CONSULTATION
d. Consultancy service
4. What is a civil wrong committed by one person causing damage to another person of his
property, emotionally well-being, or reputation?
a. Consequential damage
b. Fraud
c. Punitive damage
D. TORT
5. For court appearance, electronics engineer must charge a minimum fee to the client of not less
than ____ per hour per appearance regardless whether the hearing is postponed or not
500
6. In unit cost method, the professional minimum fee of ____________ for every detached power
supply
1000
7. What law created the Movie and Television Review and Classification Board (MTRCB)?
P.D. 1986
8. What government regulation in telecommunication provides the policy to improve the provision
of local exchange carrier service?
A. E.O. 109
b. R.A. 3846
c. E.O. 59
d. E.O. 546
9. What is the basic law that provides for the regulation of radio station, communications in the
Philippines and other purposes?
A. R.A. 3846
b. D.O. 11
c. D.O. 88
d.D.O. 5
10. Which law refers to the "Electronic Commerce Act of 2000" or E-commerce act of the
Philippines?
a. R.A. 8927
b. R.A. 9287
C. R.A. 8792
d. R.A. 8729
13. The member of the board of electronics engineers can hold a maximum year of
3 YEARS
14. The members of the Board shall hold office for a term of __ years.
3
15. Maximum number years of continuous terms for an Electronics Engineer Board member.
6 YEARS
16. Under 9292, an Electronics Technician may apply registration without examination within __
after the effectively of the act.
5 YEARS
HALL OF FAME
5. Proposed that light has dualistic and extend it into electron characteristic.
DE BROGLIE
7. Discovered radioactivity
BECQUEREL
8. Mass spectrograph
FRANCIS ASTON
TELL ME WHEN
UNCLASSIFIED
1. Chemical bonding . . .
BOND . . . DISTANT TO EACH OTHER