Académique Documents
Professionnel Documents
Culture Documents
04
(ECN-TC600466)
This detection switch (board) is added with the purpose of displaying properly the remaining time for the DAT tapes having the
capacity over 120 minutes.
Longtime tapes
Use a tape of capacity below 120 minutes, if making an important recording.
A longtime tape over 120 minutes is very thin and easily expandable more than normal tapes, thus causing the following
troubles:
Repeated cue/review, AMS search, fast feed/rewind, etc. will cause the tape to be caught in the machine.
Start ID failure
Low sound quality
Difference List
FORMER TYPE FORMER TYPE
Unit without DETECTION board Unit with DETECTION board
(DRUM DRIVE board suffix No. ! or !) (DRUM DRIVE board suffix No. !)
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
*** DRUM DRIVE BOARD *** *** DRUM DRIVE BOARD ***
JW06 1-216-296-00 METAL CHIP 0 5% 1/8W Not used
Note: When replacing the DRUM DRIVE board, check JW06 is present or not.
If an unit without DETECTION board is not equipped with JW06, the unit dose not operate correctly.
JW06 in not needed for an unit with DETECTION board. In case the DRUM DRIVE board for replacement has JW06, it
should be eliminated.
9-960-744-81
DTC-ZE700
US Model
Canadian Model
SERVICE MANUAL AEP Model
UK Model
SUPPLEMENT-2
File this supplement with the service manual.
(ECN-TC600575/TC700005/TC700022)
In this set, the pattern and circuit of MAIN board were changed during
the production (for serial No., see the following table).
For the schematic diagram, printed wiring boards, and electrical parts
list of the MAIN board, see this service manual supplement-2.
9-960-744-84
DTC-ZE700
REVISION HISTORY