Académique Documents
Professionnel Documents
Culture Documents
Elgi reciprocating compressors are available in stationary, electric powered models. Custom built models for specific applications are also available.
Wire wound copper to copper after cooler Greater cooling and better heat dissipation
High quality piston rings Low oil carry-over and extended life of piston rings
High Volume
Type of
Power Capacity Working Pressure Mounting
Model
HP kW
3
m /hr cfm kg/cm2 psi g
High Pressure
HP03 300 3 2.2 6.00 3.53 30 426.69 Base
HP05 300 5 3.7 12.35 7.27 30 426.69 Base
HP07 300 7.5 5.6 19.56 11.51 30 426.69 Base
HP10 300 10 7.5 25.21 14.84 30 426.69 Base
HP15 300 15 11.2 50.97 30.00 30 426.69 Base
HP20 300 20 14.9 67.96 40.00 30 426.69 Base
Super Pressure
SP20 400 20 14.9 59.46 35.00 40 568.92 Base
SP20 600 20 14.9 56.06 33.00 60 853.38 Base
Due to continuous engineering improvements, specifications are subject to change. The pictures shown in this brochure are representative and not the entire range.
AIR UP.
comes standard on every ELGi Compressor
Distributed by
I/6091/5/4/0000/2013/11/01/S