Académique Documents
Professionnel Documents
Culture Documents
MUD AGITATOR
All Derrick agitators feature a "C" face motor coupled to a rugged oilfield gearbox, which
eliminates misalignment and troublesome couplings. This configuration promotes longer motor
and gearbox bearing life. Derrick uses a Helical-Bevel gear unit to turn the impeller. This highly
efficient gearbox offers a 95% power transfer, which is approximately 30% more than a worm
drive gearbox. Helical-Bevel gearboxes are preferred over worm gear arrangements because of
their power efficiency, reliability, and lower operating temperatures.
Operating at a noise level of less than 75 dBA Derrick agitators are significantly quieter than the
industry standard of 90 dBA.
The Derrick agitator is available in both horizontal (model DE-AG-H) and vertical (model
DE-AG-V) configurations sizes range from 5 to 30 HP. Derrick agitators carry a two year
warranty.
Please contact a Derrick Equipment representative with your tank dimensions and maximum mud
weights for the correct agitator model, horsepower, impeller (size, type and quantity), and shaft
length to meet your requirements.
DE-AG / SSCP 9/03 Copyright 2003 Derrick Corporation. All products indicated by trademark symbols are trademarked and/or registered by Derrick Corporation.
DE-AG
Mud Agitator
Derrick DE-AG mud agitators come complete with an explosion proof "C" faced motor, a highly efficient
gear box, impeller and shaft complete with bushing. Available motors range from 5 HP to 30 HP. The
motor is attached directly to the gear box assembly, which helps prevent premature bearing failure
due to misalignment. Derrick uses a Helical-Bevel gear unit to turn the impeller. This highly efficient
gearbox offers a 95% power transfer, which is approximately 30% more than a worm drive gearbox. This
allows the DE-AG to do the same amount of work with less horsepower. The noise level of the DE-AG
has been reduced to less than 75 dBA. Agitator model, horsepower, impeller diameter, and shaft length are
customized to specific tank dimensions and maximum mud weights. Available horsepowers: 5, 7.5, 10, 15,
20, 25, and 30.
Please contact a Derrick Equipment representative with your tank dimensions and maximum mud weights for the
correct agitator model, horsepower, impeller diameter and shaft length to meet your requirements. The DE-AG gear
box has a two year warranty.
DIMENSIONS (IN,MM)
MODEL
A B C D E F G H I
DE-AG 3 40 1016 13 330 19 483 17 432 18 457 5 /16
15
151 8 /4
3
222 (6) /16
11 17 2 51
DE-AG 5 40 1016 14 1/2 368 21 533 19 483 18 457 6 3/4 171 9 1 /4 235 (6) 11/16 17 2 51
DE-AG 7.5 40 1016 15 1/2 394 21 533 19 483 18 457 6 3/4 171 9 1 /4 235 (6) 11/16 17 2 51
DE-AG 10 54 1372 19 483 28 711 25 1/2 648 16 406 9 7/8 251 12 3/8 314 (8) 11/16 17 3 76
DE-AG 15 54 1372 19 483 28 711 25 1/2 648 16 406 9 7/8 251 12 3/8 314 (8) 11/16 17 3 76
DE-AG 20 54 1372 20 1/2 521 28 711 25 1/2 648 16 406 9 7/8 251 12 3/8 314 (8) 11/16 17 3 76
DE-AG 25 64 1626 23 1/2 597 34 864 31 1/2 800 15 381 12 1/4 311 14 3/4 375 (10) 11/16 17 2 51
DE-AG 30 64 1626 23 1/2 597 34 864 31 1/2 800 15 381 12 1/4 311 14 3/4 375 (10) 11/16 17 2 51
E F
G
B
CD
PARTS LIST:
TANK DEPTH
3 HP (13745 Series)
5 & 7.5 HP (13703 Series)
.75 X IMPELLER DIA.
10 & 15 HP (13704 Series)
(RECOMMENDED) 20 HP (13747 Series)
25 & 30 HP (13746 Series)
DE-AG Skid / SSCP 9/03 Copyright 2003 Derrick Corporation. All products indicated by trademark symbols are trademarked and/or registered by Derrick Corporation.