Académique Documents
Professionnel Documents
Culture Documents
www.jwdonchin.com
4841 W. Chicago Ave. Chicago, IL 60651 Ph: 773.261.2182 Fax: 773.261.2867 jwdonchin@ameritech.net
INSIDE MICROMETERS
Inside Micrometers
Series 345, 145
LUT
SO E
AB
Y
OG
EC
H N OL
T
345-711-30
145-187
300401 Cap
145-193
300400 Holder
145-193
A special holder is available for inside microme-
ters.The holder must be used with No.156-101
MITUTOYO Stand or any other similar stand or
vise available in the shop.
Features
Accuracy to .0002" with graduations of .001". Every thousandth is numbered for easy reading.
Easy zero adjustment. Easily adjusted for slide movement of jaw (Exclusive.)
Clear graduations on satin-chrome finish. Spanner wrench is supplied with every micrometer.
Caliper type jaws are made of high-grade, tool steel. Complete with fitted carrying case.
They are satin-chrome finished. Digimatic type features LCD Readout, Preset,
Locking clamp for positive locking of spindle. Zero/ABS, Data/Hold, Inch/mm and SPC Output.
With ratchet thimble for constant force.
Specifications
Digimatic Inside Micrometers with Absolute Encoder
Inch/Metric
LCD
Order No. Range Resolution Accuracy Remarks
345-711-30 .2"1.18" .00005" .0002" with SPC output
530mm 0.001mm
345-712-30 1.0"2.0" .00005" .00025" with SPC output
25.4-50.8mm 0.001mm
Metric
Order No. Range Resolution Accuracy Remarks
345-511-30 530mm 0.001mm 0.005mm with SPC output
345-512-30 2550mm 0.001mm 0.006mm with SPC output
Note: Metric only Digimatic models have mm thimble and no inch/mm conversion function.
For SPC output order Connecting Cable 937387 (1m) or 965013 (2m). Replacement Battery: 541980 (1pc), 541980-10 (10pcs/SET).
N-2
N-03 (2003) full size 12/8/03 7:20 PM Page 1
INSIDE MICROMETERS
Inside Micrometers
Inch
Order No. Range Resolution Accuracy Remarks
145-193 .2"1.18" .001" .0002" Measuring Face: A
145-194 1.0"2.0" .001" .00025" Measuring Face: B
145-195 2.0"3.0" .001" .0003" Measuring Face: C
145-196 3.0"4.0" .001" .00035" Measuring Face: C
Metric
Order No. Range Resolution Accuracy Remarks
145-185 530mm 0.01mm 0.005mm Measuring Face: A
145-186 2550mm 0.01mm 0.006mm Measuring Face: B
145-187 5075mm 0.01mm 0.007mm Measuring Face: C
145-188 75100mm 0.01mm 0.008mm Measuring Face: C
Measuring Face: A
.2"
R .087"
.079"
.079"
.18"
R .087"
1.08"
R.47"
.17"
1.24"
1.08"
1.08"
.49"
.49"
(1.0" to 2.0")
.177"
(.2" to 1.18")
.177"
Carbide Inlaid
.079" .079" (Diameter) (R=.48")
(R=.087") .48"
Carbide Pins
.69"
.118" .315"
.118"
.12"
.315"
1.26"
.1.3"
.079"
N-3
N-04 (2003) full size 12/8/03 7:22 PM Page 1
INSIDE MICROMETERS
Inside Micrometers
Series 141 Interchangeable Type
141-233 141-102
141-101
The 141 Series Inside Micrometers are probably the most To provide point contact, all contact points are made
frequently used inside measuring instruments because of spherical and hardened for extra long tool life. The overall
their wide range and simplicity in measuring operation. accuracy is .0004" up to 12" (300mm), .001" thereafter to
No. 141-233, (photo shown), consists of 5 interchangeable 40".
rods, .500" micrometer head, .500" collar 1" extension
and handle. The range covered by this unit is 2" to 12".
Features
Each interchangeable rod is marked with its measuring is used without the rod or collar.
range. For 1.250" to 1.500" a .250" collar is added between the
Both micrometer head and furnished rods are satin- rod and head. For 1.500" to 1.750" range, the rod is
chrome finished throughout. replaced. For 1.750" to 2", the collar is added between
Positive locking clamp attached on No. 141-101 and the rod and head. Thus, it measures 1" to 2".250" at a
141-102. No lock on the larger sizes. time.
Supplied with fitted carrying case. No. 141-233
Since this Inside Micrometer comes with a .500" range
For closer tolerance work it is recommended that the Micrometer Head, the combining of rod, collar and
micrometer with a rod inserted be calibrated with a extended thimble is made simpler. For instance: the rod
known size such as a ring gage. The setting ring for marked 46" measures from 4"4.5". For 4.55" range,
Holtest would be an ideal choice. the .500 collar is added. For 5"5.5" the extension thim-
No. 141-102 ble is used and for 5.5" to 6" the extension thimble and
As shown here, the Micrometer Head has a 0.250" collar are used.
range, reading in thousandths. A detachable holder pro- Both measuring ends are hardened and have micro-
vides easy access when measuring inside diameters lapped finish for lasting accuracy.
within deep holes. For 1" to 1.250" range, the micrometer
N-4
N-05 (2003) full size 12/8/03 7:24 PM Page 1
INSIDE MICROMETERS
Specifications
Inside MicrometersInterchangeable Rod Type
Inch
Spacing Diameter
Order No. Range Collar of Rods Remarks
141-102 12" .250" .248" Includes 141-002 and 2 pcs rods
141-208 28" .500" .248" Includes 141-026, 3 rods and 1" extended thimble
141-233 212" .500" .248" Includes 141-026, 5 rods and 1" extended thimble
141-121 820" 1", 2" .355" Includes 141-010 and 3 pcs rods
141-122 840" 1", 2" .355" Includes 141-010 and 8 pcs rods
Metric
Spacing Diameter
Order No. Range Collar of Rods Remarks
141-101 2550mm 6.0mm 6.3mm Includes 141-001 and 2 pcs rods
141-205 50200mm 12.0mm 6.3mm Includes 141-025, 3 rods and 25mm extended thimble
141-206 50300mm 12.0mm 6.3mm Includes 141-025, 5 rods and 25mm extended thimble
141-117 200500mm 25mm, 50mm 9.0mm Includes 141-009 and 3 pcs rods
141-118 2001000mm 25mm, 50mm 9.0mm Includes 141-009 and 8 pcs rods
Micrometer Heads
Inch
Order No. Head Travel Resolution Accuracy
141-002 .25" .001" .0001"
141-026 .50" .001" .0001"
141-010 1.00" .001" .0001"
Metric
Order No. Head Travel Resolution Accuracy
141-001 7.0mm 0.01mm 0.003mm
141-025 13.0mm 0.01mm 0.003mm
141-009 25.0mm 0.01mm 0.003mm
1.71" (43.5)
.54" .91" .2"
(13.7) (23) (5)
.05" .07"
(1.2) (1.8)
(8.8) (11.5)
.45"
(6.5)
(15)
(15)
.26"
.59"
(12)
.47"
.2"
.35"
SR .39"
.16" (4) hole .24"
(6.2)
(SR10) 141-026
(METRIC)
141-001
N-5
N-06 (2003) full size 12/8/03 7:26 PM Page 1
INSIDE MICROMETERS
337-203
137-102
Features
Wide range of ID measurements by combining Power Supply:
extension rods with the micrometer head. The rod One Silver oxide cell (SR-44), offers 4,500 hours of life
is accurately finished and incorporated in a pipe for The display automatically turns off if idle after 20 minutes.
shop-floor use.
The 337 series provides digital readout to Accuracy
.0001"/0.001mm and can be linked to the SPC System. Series 137, 337:
Digimatic Function Include: [(.00015+.00005n+.00005 (L/2))"]*/(3+n+L/50)m
Preset *n=Number of rods, L=Maximum measuring length [(inch)] (mm),
Inch/mm conversion Fraction rounded up
Zero-Set/ABS
Hold
Data Output
Specifications
Digimatic Inside Micrometers
Inch/Metric
LCD Head Extension Rods
Order No. Range Resolution Travel (Dia .50") Remarks
337-203 840" .0001"/0.001mm 1.0" 1", 2", 4" (2 pcs.) Includes Micrometer
8", 12" Head with SPC output.
337-204 860" .0001"/0.001mm 1.0" 1", 2", 4", 8" Includes Micrometer
12" (3 pcs.) Head with SPC output
For SPC output order Connecting Cable 937387 (1m) or 965013 (2m).
Replacement Battery: 541980 (1 pc.), 541980-10 (10 pcs. SET)
N-6
N-07 (2003) full size 12/8/03 7:28 PM Page 1
INSIDE MICROMETERS
Inside Micrometers
Inch
Extension Rods
Order No. Range (Diameter .50") Remarks
137-112 212" .5", 1", 2"(2pcs), 4" Include 137-002
137-114 240" .5", 1", 2", 4"(2pcs), 6", 8", 12" Include 137-002
Metric
Extension Rods
Order No. Range (Diameter 12.5mm) Remarks
137-102 50300mm 13, 25, 50(2pcs), 100mm Include 137-001
137-104 501000mm 13, 25, 50, 100(2pcs), 150, 200, 300mm Include 137-001
137-108 50500mm 13, 25, 50(2pcs), 100, 200mm Include 137-001
Rods with Carbide-tipped Measuring Face
Micrometer Heads
Inch
Order No. Head Travel Resolution Accuracy
137-002 .50" .001" .0001"
Metric
Order No. Head Travel Resolution Accuracy
137-001 13.0mm 0.01mm 0.003mm
137-002
N-7
N-08 (2003) full size 12/8/03 7:30 PM Page 1
INSIDE MICROMETERS
339-293 139-179
Features Accuracy
Wide range of ID measurements by combining exten- Series 139, 339:
sion pipes and anvils with the micrometer head. [(.00015+.00005n+.00005 (L/2))"]/(3+n+L/50)m*
The 339 series provides digital readout to Series 140:
.0001"/0.001mm and can be linked to the SPC System. [.(0003+.00005n+.00005 (L/2))"]/(7+n+L/50)m*
*n=Number of rods, L=Maximum measuring length [(inch)] (mm),
Pipe diameter Fraction rounded up
139 series: .67"/17mm
140 series: 1.26"/32mm
For higher repeatability of measurement, light weight
extension pipes made of CFRP (Carbon Fiber
Reinforced Plastic) for 139 Series.
Digimatic Functions Include:
Preset
Inch/mm conversion
Zero set/ABS
Hold
Data output
Power Supply: One silver oxide cell
(SR-44) offers 4,500 hours of life
The display automatically turns off idle after 20 minutes
Specifications
Tubular Inside Micrometers
Inch
Diameter Extension
Order No. Range of Rods Rods Remarks
139-201 1.512" .375" .5", 1", 2", 2.5", 3", 3.5", 4", 6" Include 139-004
139-202 440" .375" 1", 2", 3", 6", 9", 12", 14", 16", 17", 18" Include 139-006
Specifications
Digimatic Inside Micrometers (Series 339)
Inch/Metric
LCD Head Diameter
Order No. Range Resolution Travel of Rods Remarks
339-293 840" .0001" 1.0" .67" Include Micrometer Head and 5 pcs rods
0.001mm with SPC output
339-294 880" .0001" 1.0" .67" Include Micrometer Head and 8 pcs rods
0.001mm with SPC output
For SPC output order Connecting Cable 937387 (1m) or 965013 (2m).
Replacement Battery: 541980 (1 pc.), 541980-10 (10 pcs./SET)
N-8
N-09 (2003) full size 12/8/03 7:31 PM Page 1
INSIDE MICROMETERS
139-002 139-004
1 3
4
4
18
4
4
33 33
8 8
32
21
19
SR10 SR10
16.5 175.5 699 101 15
1000 to 1050
N-9
N-10 (2003) full size 12/8/03 7:14 PM Page 1
INSIDE MICROMETERS
133-223 133-224
133-225
133-226
Features
Accuracy up to 4" .00015" 26" set and 212" set are available.
46" .0002" Clear, crisp graduations on the satin chrome finished
612" .0003" micrometer head.
With positive locking clamp. Carbide tipped measuring faces.
Zero point can be readjusted by twisting the micrometer Supplied in a carrying case.
head sleeve. A key wrench is supplied.
Specifications
Tubular Inside Micrometers Tubular Inside Micrometers
Inch Metric
Order No. Range Resolution Accuracy Order No. Range Resolution Accuracy
133-223 23" .001" .00015" 133-143 50-75mm 0.01mm 3 m
133-224 34" .001" .0002" 133-144 75-100mm 0.01mm 4 m
133-225 45" .001" .00025" 133-145 100-125mm 0.01mm 5 m
133-226 56" .001" .00025" 133-146 125-150mm 0.01mm 5 m
133-227 67" .001" .00025" 133-147 150-175mm 0.01mm 5 m
133-228 78" .001" .00025" 133-148 175-200mm 0.01mm 5 m
133-229 89" .001" .00025" 133-149 200-225mm 0.01mm 5 m
133-230 910" .001" .0003" 133-150 225-250mm 0.01mm 6 m
133-231 1011" .001" .0003" 133-151 250-275mm 0.01mm 6 m
133-232 1112" .001" .0003" 133-152 275-300mm 0.01mm 6 m
Tubular Inside Micrometer Sets Tubular Inside Micrometer Sets
Inch Metric
Order No. Total Range Set Configuration Order No. Total Range Set Configuration
133-903 26" 133-223, 224, 225, 226 133-901 50-150mm 133-143, 144, 145, 146
(4 Mikes/set) with fitted case (4 Mikes/set) with fitted case
133-904 212" 133-223, 224, 225, 226, 133-902 50-300mm 133-143, 144, 145, 146,
(10 Mikes/set) 227, 228, 229, 230, 231, 232 (10 Mikes/set) 147, 148, 149, 150, 151, 152
with fitted case with fitted case
N-10
N-11 (2003) full size 12/8/03 7:17 PM Page 1
INSIDE MICROMETERS
DIMENSIONS (inch) L
Order No. L A B
133-225 4" .15" .12" A 1.85" B
133-226 5" .14" .12" (47)
.315"
.315"
133-227 6" .65" .59"
(8)
(8)
133-228 7" .61" .59"
.71" (18)
133-229 8" .61" .59"
133-230 9" .61" .59"
133-231 10" .61" .59"
133-232 11" .61" .59"
R=.394" R=.394"
(SR10) (SR10)
1.97"
(50)
.14" .12"
(3.5) (3)
1.45"
.315"
.315"
(37)
(8)
(8)
.59"
133-143
R=.394" 133-223 R=.394"
(SR10) (SR10)
DIMENSIONS (metric)
.315"
.315"
(8)
(8)
Order No. L A B
133-145 100 3.8 3
133-146 125 3.5 3
.59"
133-144
133-224
(mm)
N-11
N-12 (2003) full size 12/9/03 9:52 AM Page 1
BORE GAGES
Features
.00012 (0.003mm) or less wide range accuracy
Anvil displacement is directly detected by the ultra
compac built-in sensor (no mechanical transmitter is used)
Maximum extension up to 78.74 (2000mm)
Reaches deep holes easily!
Simple to operate can preset 3 reference (master) value
and set upper/lower tolerance limits for each!
IP53 dust/water protection level
Specifications
Order No. 511-521
Range 1.8" - 4" (45 - 100mm)
Contact Point Stroke .048" / 1.2mm
Resolution .00005" / 0.001mm
Wide range accuracy .00012" / 0.003mm
Narrow range accuracy .00008" / 0.002mm
Repeatability 1 count
Quantizing error 1 count
Measuring force 5N or less
Battery (541980) Silver oxide cell (SR-442 pcs.)
Battery Life 9 months under normal use
Sensor/scale Electrostatic capacitance
absolute scale
Sampling frequency 50 times / sec
Protection level IP53
Data output SPC data output
Mass 1.1 lbs. / 500g
Standard Accessories
Anvils 14 pcs.
Spacer 4 pcs. .02", .04", .08", .12"
Hex Wrench 1 pc. Specifications
Optional Accessories Order No. 516-120-22
905338 SPC Cable 40"/1m Set of:
905409 SPC Cable 80"/2m Steel Rectangular gage Block
21DZA089 Extension Rod 9.84"/250mm .04", .08", .16", .2", .4", .8", 1", 2", 3"
21DZA081 Extension Rod 19.69"/500mm Flat Jaw (619970) 2 pcs.
516-120-22 Measuring Size set Holder 160mm (619004) 1 pc.
Gage Block Set Wooden Box
N-12
N-13 (2003) full size 12/8/03 7:21 PM Page 1
BORE GAGES
1.157"
rotation RESET sw 29.4
(320)
M/W sw
inclination (90)
"
2.402
61 For inch-readable model
ON/OFF in/mm sw
DATA/HOLD sw TOL sw
PRESET sw 1.102" M26x1.5
START sw 28
5.906"
150
16.5
.65"
3.937"
100
rotation
(320)
9.843" ( 19.685")
10.571" (20.413")
9.134" (18.976")
(13.366")
268.5 (518.5)
(339.5)
250 (500)
232 (482)
1.181" .866"
30 22
.787"
20
5.906"
1.102"
150
1.181"
30 28
.059"
1.5
1.102"
28
2
SR 79"
.354"
. 0
9
R 1.339"
34
N-13
N-14 (2003) full size 12/8/03 7:23 PM Page 1
BORE GAGES
526-173
Optional Stand
526-120 (215-120M)
Probe Depth (L)
Features
Measures diameters of small holes. Accuracy: .00016"/4m (Range: .037.4"/0.9510mm)
Radius displacement of split-ball contact is converted to .00024"/6m (Range: .4.7"/1018mm)
axial displacement of measuring pin, which is shown on Optional stand (215-120) for Bore Gages Series 526
the dial indicator. is available for efficient measurement of multiple
Digimatic Indicator can be installed in place of the dial small holes.
indicator.
Specifications
Dial Bore Gages
Inch
Order No.* Order No. Order No. Measuring Number of Probe
Without Dial With 2922FB With 2923FB-10 Range Anvils Depth
Gage Graduation .0005" Graduation .0001"
526-103 526-119 526-122 .3"-.4" 6 pcs. 2.2"
526-104 526-120 526-123 .4"-.7" 8 pcs. 2.4"
*Does not include dial gage cover.
Metric
Order No.* Order No. Order No. Measuring Number of Probe
Without Dial With 2046FB With 2109FB Range Anvils Depth
Gage Graduation 0.01mm Graduation .0.001mm
526-101 526-126 526-124 7-10mm 6 pcs. 56mm
526-102 526-127 526-125 10-18mm 8 pcs. 62mm
*Does not include dial gage cover.
N-14
N-15 (2003) full size 12/8/03 7:25 PM Page 1
BORE GAGES
Specifications
Dial Bore Gages
Split-Ball Type
Inch
Order No.* Order No. with Measuring Anvil Setting Ring No. of
Without 2923FB-10 Range Probe Range Length Code No. Size Needle
Dial Gage Graduation .0001" No.
1.0 .037".045" 177-220 .04"
1.1 .042".049" 177-222 .045"
526-175 526-176 .037".061" 1.2 .046".053" .45" 177-225 .05" 1
1.3 .050".057" 177-227 .055"
1.4 .054".061" 177-230 .06"
1.75 .060".075" 177-236 .07"
2.00 .070".085" .69" 177-239 .08"
2.25 .080".095" 177-242 .09"
2.50 .090".105" 177-208 .10"
526-165 526-166 .060".157" 2.75 .100".115" 177-246 .11" 2
3.00 .110".125" 177-248 .12"
.89"
3.25 .120".135" 177-250 .13"
3.50 .130".145" 177-252 .14"
3.75 .140".157" 177-255 .15"
4.0 .145".170" 177-204 .16"
4.5 .165".190" 177-257 .18"
5.0 .185".210" 177-205 .20"
526-155 526-156 .145".290" 5.5 .205".230" 1.26" 177-263 .22" 1
6.0 .225".250" 177-267 .24"
6.5 .245".270" 177-271 .26"
7.0 .265".290" 177-275 .28"
Metric
Order No.* Order No. with Order No. with Measuring Anvil Setting Ring No. of
Without 2046FB 2109FB Range Probe Range Length Code Size Needle
Dial Gage Graduation Graduation No. (mm) No. (mm)
0.01mm 0.001mm
1.0 0.951.15mm 177-220 1.0
1.1 1.071.25mm 177-222 1.1
526-170 526-173 526-172 0.951.55mm 1.2 1.171.35mm 11.5 177-225 1.2 1
1.3 1.271.45mm 177-227 1.3
1.4 1.371.55mm 177-230 1.4
1.75 1.501.90mm 177-236 1.75
2.00 1.802.20mm 17.5 177-239 2.00
2.25 2.052.45mm 177-242 2.25
2.50 2.252.75mm 177-208 2.50
526-160 526-163 526-162 1.54mm 2.75 2.503.00mm 177-246 2.75 2
3.00 2.753.25mm 22.5 177-248 3.00
3.25 3.003.50mm 177-250 3.25
3.50 3.253.75mm 177-252 3.50
3.75 3.504.00mm 177-255 3.75
4.0 3.74.3mm 177-204 4.0
4.5 4.24.8mm 177-257 4.5
5.0 4.75.3mm 177-205 5.0
526-150 526-153 526-152 3.77.3mm 5.5 5.25.8mm 32 177-263 5.5 1
6.0 5.76.3mm 177-267 6.0
6.5 6.26.8mm 177-271 6.5
7.0 6.77.3mm 177-275 7.0
Above sets include setting rings.
*Does not include Dial gage cover.
N-15
N-16 (2003) full size 12/8/03 7:27 PM Page 1
BORE GAGES
511-162
511-212
.24.4" .4".74"
1018.5mm
.7"2.4" 2.0"16.0"
1860mm 50400mm
Features
Interchangable anvils and necessary accessories to Optional extension rods can be attached.
perform close tolerance I.D. measurements. A Digimatic Indicator can be attached in place of the
Carbide ball contact point for durability. dial gage.
Accuracy: .0002"/5m
Dial Faces
+ 0 _
_0+
+ 0 _ 1
10 1
0 10 0
5 5 1 1 2
20 2
20 90 10
3
30 3
30
.0001" 1m
1m
10
.0005"
10 2 2 4
40 4
40 80
0.01"
20
5
50 NO.1011-11
5
50
NO. 2922-08 2 3 NO. 2109FB Shock
15 2 3
SHOCK
MADE IN
PROOF
JAPAN
15 3 0
1 4
5
6 JEWELS
3 6
60 .8
10 0
.6 .4
.2
1.0
6J E W E ELLES D
JEW
MADE IN JAPAN
6
60 70 2
1
0 9
8
30
1 0
.2 .8 3 7
0
707
.4 .6
7
70 4 5
6
20 20 808 8 60 40
4 4 80
25 5 10 909
909 100 50
N-16
N-17 (2003) full size 12/8/03 7:29 PM Page 1
BORE GAGES
Specifications
Dial Bore Gages
Inch
Order No.* Order No. Order No. Measuring Number Number Probe
Without With 2922FB With 2923FB-10 Range of Anvils of Spacers Depth
Dial Gage Graduation .0005" Graduation .0001"
511-214 511-213 511-212 .24"-.4" 9 pcs. - 2"
511-205 511-207 511-206 .4"-.74" 9 pcs. 1 4"
511-104 511-159 511-163 .7"-1.4" 8 pcs. 3 4"
511-105 511-160 511-164 1.4"-2.5" 6 pcs. 4 6"
511-107 511-162 511-166 2"-6" 11 pcs. 4 6"
2" Sub-Anvil
511-181 511-184 511-187 4"-6.5" 13 pcs. 4 6"
511-182 511-185 511-188 6.5"-10.0" 6 pcs. 6 10"
511-183 511-186 511-189 10.0"-16.0" 5 pcs. 6 10"
511-911 (set) 511-912 (set) .7"-6.0" 25 pcs. 7 4", 6"
2" Sub-anvil
*Does not include dial gage cover.
Metric
Order No.* Order No. Order No. Measuring Number Number Probe
Without With 2046FB With 2109FB Range of Anvils of Spacers Depth
Dial Gage Graduation 0.01mm Graduation 0.001mm
511-201 511-204 511-203 10-18.5mm 9 pcs. 1 90mm
511-126 511-171 511-167 18-35mm 9 pcs. 2 100mm
511-127 511-172 511-168 35-60mm 6 pcs. 4 150mm
511-128 511-173 511-169 50-100mm 11 pcs. 4 150mm
511-132 511-174 511-170 50-150mm 11 pcs. 4 150mm
50 mm Sub-anvil
511-129 511-175 511-178 100-160mm 13 pcs. 4 150mm
511-130 511-176 511-179 160-250mm 6 pcs. 7 250mm
511-131 511-177 511-180 250-400mm 5 pcs. 7 250mm
511-901 (set) 511-902 (set) 18-150mm 26 pcs. 7 100mm
50mm Sub-anvil 150mm
*Does not include dial gage cover.
Optional Accessories
Extension Rods
Bore Gage Extension Length
Measuring 4.92" 9.84" 19.69" 29.53" 39.37" Rod Spanner
Range 125mm 250mm 500mm 750mm 1000mm Diameter
.71.4" 953549 953550 953551 .34" 102148A
1835mm 8.7mm
1.46.5" 953552 953553 953554 953555 953556 .47" 212556
35160mm 12mm
6.516" 953557 952361 953558 953559 953560 .59" 212556
160400mm 15mm
Note: Above list is used for 511-1XX series; not available for 511-2XX Series.
N-17
N-18 (2003) full size 12/8/03 7:31 PM Page 1
BORE GAGES
511-319
Extension Rod
Features
Interchangeable anvil is attached to a micrometer head Optional extension rods can be attached.
for accurate dimensional setting. A Digimatic Indicator can be attached in place of the
Carbide ball contact point for durability. dial gage.
Measuring range can be expanded by attaching a Accuracy: .0002"/5m
sub-anvil.
N-18
N-19 (2003) full size 12/8/03 7:32 PM Page 1
BORE GAGES
Specifications
Dial Bore Gages with Micrometer Heads
Inch
Order No.* Order No. Order No. Measuring Mike Head Extensions Probe
Without With 2922FB With 2923FB-10 Range Travel Mike Head Depth
Dial Gage Graduation .0005" Graduation .0001"
511-342 511-345 511-346 1.4-2.5" .2" .2", .4", .6", .8" 6"
511-332 511-335 511-336 2.4-4.0" .4" .4", .8" 6"
511-306 511-325 511-326 4.0-6.0" .5" .4", .8", .8" 6"
511-307 511-319 511-320 6.0-10.0" 1" 1", 2" 10"
511-308 511-321 511-322 10.0-16.0" 2" 2", 2" 10"
511-309 511-323 511-324 16.0-24.0" 2" 2", 4" 10"
511-310 511-329 511-330 24.0-32.0" 2" 2", 4" 10"
*Does not include dial gage cover.
Metric
Order No.* Order No. Order No. Measuring Mike Head Extensions Probe
Without With 2046FB With 2109FB Range Travel Mike Head Depth
Dial Gage Graduation 0.01mm Graduation 0.001mm
511-341 511-344 511-343 35-60mm 5mm 5mm, 10mm
15mm, 20mm 150mm
511-331 511-334 511-333 60-100mm 10mm 10mm, 20mm 150mm
511-301 511-312 511-311 100-160mm 13mm 10mm, 20mm,
20mm 150mm
511-302 511-314 511-313 150-250mm 25mm 25mm, 50mm 250mm
511-303 511-316 511-315 250-400m 50mm 50mm, 50mm 250mm
511-304 511-318 511-317 400-600mm 50mm 50mm, 100mm 250mm
511-305 511-328 511-327 600-800mm 50mm 50mm, 100mm 250mm
*Does not include dial gage cover.
Optional Accessories
Extension Rods
Bore Gage Extension Length
Measuring 4.92" 9.84" 19.69" 29.53" 39.37" Rod Spanner
Range 125mm 250mm 500mm 750mm 1000mm Diameter
1.4-2.5" 953549 953550 953551 .34" 102148A
3560mm 8.7mm
2.46.4" 953552 953553 953554 953555 953556 .47" 212556
60160mm 12mm
6.032.0" 953557 952361 953558 953559 953560 .59" 212556
150800mm 15mm
Note: Above list is used for 511-3XX Series.
N-19
N-20 (2003) full size 12/8/03 7:16 PM Page 1
BORE GAGES
Features
Can measure ID at position close to the bottom of
blind holes.
511-431 511-442 A Digimatic Indicator can be attached in place of the
dial gage.
Accuracy: .0002"/5m
Probe Depth
6" (150mm)
Specifications
Dial Bore Gages
Inch
Order No.* Order No. Order No. Measuring Number of Number of
Without Dial With 2922FB With 2923FB-10 Range Anvils Spacers
Gage Graduation .0005" Graduation .0001"
511-406 511-431 511-441 .6-1.4" 11 pcs., .4" Sub-anvil 1
511-407 511-432 511-442 1.4-2.4" 6 pcs. 4
511-408 511-433 511-443 2.0-4.0" 11 pcs. 4
511-409 511-434 511-444 2.0-6.0" 11 pcs., 2" Sub-anvil 4
*Does not include dial gage cover.
Metric
Order No.* Order No. Order No. Measuring Number of Number of
Without Dial With 2046FB With 2109FB Range Anvils Spacers
Gage Graduation 0.01mm Graduation 0.001mm
511-401 511-411 511-421 15-35mm 11 pcs., 10mm Sub-anvil 1
511-402 511-412 511-422 35-60mm 6 pcs. 4
511-403 511-413 511-423 50-100mm 11 pcs. 4
511-404 511-414 511-424 50-150mm 11 pcs., 50mm Sub-anvil 4
*Does not include dial gage cover.
Extension rods are not available for 511-4XX Series.
N-20
N-21 (2003) full size 12/8/03 7:17 PM Page 1
HOLTESTS
Holtests
Series 368 Two Point Models for Very Small Holes
368-022
368-023
368-024
368-025
Specifications
HoltestsTwo Point Models
Inch
Individual Accessories
Set Order No. Range Order No. Grad. L1 L2 Included In Set
.080.100" 368-021 .0001" .47" 4" 177-209 Setting Ring .100" Dia.
368-926
.100.120" 368-022 .0001" .47" 4" 202863 Hex Wrench
.120.160" 368-023 .0001" .86" 4.5" 177-206 Setting Ring .160" Dia.
.160.200" 368-024 .0001" .86" 4.5" 177-207 Setting Ring .240" Dia.
368-927
.200.240" 368-025 .0001" .86" 4.5" 202863 Hex Wrench
.240.280" 368-026 .0001" .86" 4.5"
Metric
Individual Accessories
Set Order No. Range Order No. Grad. L1 L2 Included in Set
22.5mm 368-001 0.001mm 12mm 104mm 177-208 Setting Ring 2.5mm Dia.
368-906
2.53mm 368-002 0.001mm 12mm 104mm 202863 Hex Wrench
34mm 368-003 0.001mm 22mm 114mm 177-204 Setting Ring 4mm Dia.
368-907 45mm 368-004 0.001mm 22mm 114mm 177-205 Setting Ring 5mm Dia.
56mm 368-005 0.001mm 22mm 114mm 202863 Hex Wrench
N-21
N-22 (2003) full size 12/8/03 7:19 PM Page 1
HOLTESTS
Holtests
Series 368
368-201
368-103
Specifications
Holtest
Inch with Carbide
Set Individual Accessories
Order No. Range Order No. Graduation L1 L2 included in Set
177-179 Setting Ring .350" DIA.
.275.350" 368-201 .0001" 2.32" 4.05"~4.13" 177-180 Setting Ring .500" DIA.
368-921 .350.425" 368-202 .0001" 2.32" 4.05"~4.13" 952322 Extension Rod 4"
.425.500" 368-203 .0001" 2.32" 4.05"~4.13" 205289 Spanners (pair)
202863 Hex Wrench
Metric with Carbide
Set Individual Accessories
Order No. Range Order No. Graduation L1 L2 included in Set
177-125 Setting Ring 8mm DIA.
68mm 368-101 0.001mm 59mm 103~105mm 177-126 Setting Ring 10mm DIA.
368-901 810mm 368-102 0.001mm 59mm 103~105mm 952322 Extension Rod 100mm
1012mm 368-103 0.001mm 59mm 103~105mm 205289 Spanners (pair)
202863 Hex Wrench
N-22
N-23 (2003) full size 12/8/03 7:21 PM Page 1
HOLTESTS
Holtests
Series 368 Interchangeable Anvil Type
368-206
368-238
Internal Construction
Holtest
a=.012" Standard Finish
0.3mm
Range .5-1.2"
12-30mm
Holtest
with Carbide
16
24
Specifications
Inch
Set Individual
Order No. Range Order No. Graduation L1 L2 Accessories included in Set
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish) 177-182 Setting Ring, .650" DIA.
368-982 .500.650" 368-804 .0002" 3.15" 4.88~5.04"
.650.800" 368-805 .0002" 3.15" 4.88~5.04" 952621 Extension Rod, 5.9"
N-23
N-24 (2003) full size 12/8/03 7:23 PM Page 1
HOLTESTS
Holtests
Series 368
Specifications
Inch
Set Individual Accessories
Order No. Range Order No. Graduation L1 L2 included in Set
Hardened Alloy Tool Anvil and Cone (Standard Finish)
2.02.5" 368-840 .0002" 4.13" 5.94~6.46"
368-969 2.53.0" 368-841 .0002" 4.13" 5.94~6.46" 177-315 Setting Ring, 2.5" DIA.
3.03.5" 368-842 .0002" 4.13" 5.94~6.46"
177-319 Setting Ring, 3.5" DIA.
3.54.0" 368-843 .0002" 4.13" 5.94~6.46"
952623 Extension Rod, 5.9"
With Carbide
210189 Spanners (Pair)
2.02.5" 368-240 .0002" 4.13" 5.94~6.46"
368-959 2.53.0" 368-241 .0002" 4.13" 5.94~6.46" 202863 Hex. Wrench
3.03.5" 368-242 .0002" 4.13" 5.94~6.46"
3.54.0" 368-243 .0002" 4.13" 5.94~6.46"
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
45" 368-817 .0002" 6.22" 8.78~9.76"
368-985 56" 368-818 .0002" 6.22" 8.78~9.76" 177-299 Setting Ring, 5" Dia.
67" 368-819 .0002" 6.22" 8.78~9.76" 177-303 Setting Ring, 7" Dia.
78" 368-820 .0002" 6.22" 8.78~9.76" 952623 Extension Rod, 5.9"
With Carbide 205348 Spanners (Pair)
45" 368-217 .0002" 6.22" 8.78~9.76" 202863 Hex. Wrench
368-925 56" 368-218 .0002" 6.22" 8.78~9.76"
67" 368-219 .0002" 6.22" 8.78~9.76"
78" 368-220 .0002" 6.22" 8.78~9.76"
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
89" 368-821 .0002" 6.22" 8.78~9.76"
910" 368-822 .0002" 6.22" 8.78~9.76"
1011" 368-823 .0002" 6.22" 8.78~9.76"
1112" 368-824 .0002" 6.22" 8.78~9.76" Larger Holtests are sold
With Carbide individually. No set available.
89" 368-221 .0002" 6.22" 8.78~9.76"
910" 368-222 .0002" 6.22" 8.78~9.76"
1011" 368-223 .0002" 6.22" 8.78~9.76"
1112" 368-224 .0002" 6.22" 8.78~9.76"
NOTE: Holtest Sets are not available over 8" Range.
N-24
N-25 (2003) full size 12/8/03 7:25 PM Page 1
HOLTESTS
Holtests
Series 368
Specifications
Metric
Set Individual
Order No. Range Order No. Graduation L1 L2 Accessories included in Set
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
368-972 1216mm 368-704 0.005mm 80mm 124~128mm 177-177 Setting Ring, 16mm DIA.
1620mm 368-705 0.005mm 80mm 124~128mm 952621 Extension Rod, 150mm
With Carbide 205312 Spanners (Pair)
368-902 1216mm 368-104 0.005mm 80mm 124~128mm 202863 Hex. Wrench
1620mm 368-105 0.005mm 80mm 124~128mm
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
2025mm 368-706 0.005mm 90mm 135~140mm
368-963 2530mm 368-707 0.005mm 90mm 135~140mm
3040mm 368-738 0.005mm 98mm 144~154mm 177-139 Setting Ring,
4050mm 368-739 0.005mm 98mm 144~154mm 25mm DIA.
With Carbide 177-140 Setting Ring, 40mm DIA.
2025mm 368-106 0.005mm 90mm 135~140mm 952622 Extension Rod, 150mm
368-953 2530mm 368-107 0.005mm 90mm 135~140mm 210189 Spanners (Pair)
3040mm 368-138 0.005mm 98mm 144~154mm 202863 Hex. Wrench
4050mm 368-139 0.005mm 98mm 144~154mm
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
5063mm 368-740 0.005mm 105mm 151~164mm
368-964 6275mm 368-741 0.005mm 105mm 151~164mm 177-314 Setting Ring, 62mm DIA.
7588mm 368-742 0.005mm 105mm 151~164mm 177-318 Setting Ring, 87mm DIA.
87100mm 368-743 0.005mm 105mm 151~164mm 952623 Extension Rod, 150mm
With Carbide 210189 Spanners (Pair)
5063mm 368-140 0.005mm 105mm 151~164mm 202863 Hex. Wrench
368-954 6275mm 368-141 0.005mm 105mm 151~164mm
7588mm 368-142 0.005mm 105mm 151~164mm
87100mm 368-143 0.005mm 105mm 151~164mm
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
100125mm 368-717 0.005mm 158mm 223~248mm
368-975 125150mm 368-718 0.005mm 158mm 223~248mm 177-298 Setting Ring, 125mm Dia.
150175mm 368-719 0.005mm 158mm 223~248mm 177-302 Setting Ring, 175mm Dia.
175200mm 368-720 0.005mm 158mm 223~248mm
952623 Extension Rod, 150mm
With Carbide 205348 Spanners (Pair)
100125mm 368-117 0.005mm 158mm 223~248mm
202863 Hex. Wrench
368-905 125150mm 368-118 0.005mm 158mm 223~248mm
150175mm 368-119 0.005mm 158mm 223~248mm
175200mm 368-120 0.005mm 158mm 223~248mm
Hardened Alloy Tool Steel Anvil and Cone (Standard Finish)
200225mm 368-721 0.005mm 158mm 223~248mm
225250mm 368-722 0.005mm 158mm 223~248mm
250275mm 368-723 0.005mm 158mm 223~248mm
275300mm 368-724 0.005mm 158mm 223~248mm Larger Holtests are sold individually.
With Carbide No set available.
200225mm 368-121 0.005mm 158mm 223~248mm
225250mm 368-122 0.005mm 158mm 223~248mm
250275mm 368-123 0.005mm 158mm 223~248mm
275300mm 368-124 0.005mm 158mm 223~248mm
NOTE: Holtest Sets are not available over 200mm Range.
N-25
N-26 (2003) full size 12/8/03 7:27 PM Page 1
HOLTESTS
Digimatic Holtests
Series 468
468-234
Range A
Stand and mounting plate
.275.5"/612mm .079"/2mm
.5"4"/12-100mm .012"/0.3mm are optional
412"/100300mm .512"/13mm
982693
N-26
N-27 (2003) full size 12/8/03 7:29 PM Page 1
HOLTESTS
Specifications
Digimatic Holtests Interchangeable-Head Sets
Inch/Metric
Range .275.5"/6.98512.7mm
Set Order No. 468-956 Thimble Graduation .0002"
Includes: LCD Readout
982332 Display & Thimble Unit Up to 4" .00005"/0.001mm
952909 Interchangeable Head Over 4" .0001"/0.001mm
.275.35"/6.9858.89mm
952910 Interchangeable Head
.35.425"/8.8910.795mm
952911 Interchangeable Head
.425.5"/10.79512.7mm
177-179 Setting Ring .350" DIA.
177-283 Setting Ring .425" DIA.
952322 Extension Rod 3.94" (100mm)
210187 Spanners (one pair) Range .82"/20.3250.8mm
202863 Hex Wrench Set Order No. 468-958
541980 SR44 Battery Includes:
982334 Display & Thimble Unit
952672 Interchangeable Head
.81"/20.3225.4mm
Range .5.8"/12.720.32mm 952673 Interchangeable Head
Set Order No. 468-957 11.2"/25.430.48mm
Includes: 982149 Interchangeable Head
982333 Display & Thimble Unit 1.21.6"/30.4840.64mm
952670 Interchangeable Head 982150 Interchangeable Head
.5.65"/12.716.51mm 1.62.0"/40.6450.8mm
952671 Interchangeable Head 177-184 Setting Ring 1.000" DIA.
.65.8"/16.5120.32mm 177-291 Setting Ring 1.600" DIA.
177-182 Setting Ring .650" DIA. 952622 Extension Rod 5.9" (150mm)
952621 Extension Rod 5.9" (150mm) 210189 Spanners (one pair)
210188 Spanners (one pair) 202863 Hex Wrench
202863 Hex Wrench 541980 SR44 Battery
541980 SR44 Battery
For SPC output order connecting cable 937387 (40"/1m) or 965013 (80"/2m).
N-27
N-28 (2003) full size 12/8/03 7:31 PM Page 1
HOLTESTS
Digimatic Holtest
Series 468
468-966
Complete Unit
Sets
N-28
N-29 (2003) full size 12/8/03 7:32 PM Page 1
HOLTESTS
Specifications
Digimatic Holtests Complete Unit Sets
Inch/Metric
Individual Graduation Digimatic Holtests Sets
Range Order No. Thimble LCD Readout (Complete Unit)
Set Order No. 468-968
11.2"/ 468-237 .0002" .00005"/0.001mm Includes:
25.430.48mm 468-237 Complete Gage
468-238 Complete Gage
1.21.6"/ 468-238 .0002" .00005"/0.001mm 468-239 Complete Gage
30.4840.64mm 177-289 Setting Ring 1.2" DIA.
177-291 Setting Ring 1.6" DIA.
1.62"/ 468-239 .0002" .00005"/0.001mm 210189 Spanners
40.6450.8mm 202863 Hex Wrench
541980 SR44 Batteries
For SPC output order connecting cable 937387 (40"/1m) or 965013 (80"/2mm)
Dimensions
Code No. L1 L2
468-231, 232, 233 1.77" 6.81"-6.89"
468-234, 235 2.99" 7.87"-8.03"
468-236, 237 3.46" 8.39"-8.58"
468-238, 239 4.02" 8.78"-9.17"
468-240, 241, 242, 243 4.13" 8.94"-9.45"
468-244, 245, 246, 247, 248
249, 250, 251 5.94" 11.5"-12.48"
N-29
N-30 (2003) full size 12/8/03 7:16 PM Page 1
BORE GAGES
901529
(A) 3.5"
Depth (A)
901531
(A)10.5"
901532
(A)12.5"
Optional
Extensions
901533
(A)15.5"
Features
Replacement Heads
Carbide-tipped contact point for excellent durability.
2.64" 1.10"
Easy zero adjustment because the Bore Gage can 1.65"
stand upright.
Interchangeable anvils have a large radius of curvature
for repeatable ID measurements of roughly finished
holes. No. 901956 No. 901957
Two guide pins ensure high repeatability of measure- No. 901955 Range: 2-3"
50-75mm
Range: 1.5-2"
35-50mm
Range: 3-6"
ments. 75-150mm
Wide range of measurements with interchangeable
anvils (screw-in type).
.0005"(0.01mm) or .0001"(0.001mm) reading types.
Carbide tipped anvil (optional): 901484 Accuracy .0002"/5mm
Specifications
Dial Bore Gages
Inch
Order No. (with Indicator) Probe Number of
.0005" .0001" Range Depth Anvil
545-124 545-134 1.52" 3.5" 5
545-125 545-135 23" 4.5" 5
545-126 545-136 36" 6" 7
Metric
Order No. (with Indicator) Probe Number of
0.01mm 0.001mm Range Depth Anvil
545-104 545-114 3550mm 88mm 5
545-105 545-115 5075mm 113mm 5
545-106 545-116 75150mm 153mm 7
N-30
N-31 (2003) full size 12/8/03 7:17 PM Page 1
BOREMATIC
568-978 LUT
SO E
AB
Y
OG
EC
H N OL
T
Features
LCD Readout .00005"/0.001mm. Rotatable display unit for easy reading at any angle.
Carbide tipped contact points ensure long life. Functions include:
Origin setting, Origin restoration, Zero-setting,
Efficient measurement using two measurement
Presetting, Data hold, Error alarm, Low-battery alarm,
modesABS (absolute) and INC (incremental) modes.
Data output.
Can be linked to the M-SPC (Mitutoyo Statistical
Power supply: SR44 (button-type silver oxide cell), 1 pc.
Process Control) system.
Specifications
Borematic Interchangeable-Head Sets
Inch/Metric
Set Set Display Adaptor Interchangeable Individual Setting Ring
Order No. Measuring Range Unit Supplied Contact Heads Range Supplied w/set
568-976 .275".5" 568-013 954595 952909 .275".35"/6.9858.89mm 177-179(.35")
6.98512.7mm 952910 .35".425"/8.8910.795mm 177-283(.425")
952911 .425".5"/10.79512.7mm
568-977 .5"1.0" 568-013 216556 952670 .5".65"/12.716.51mm 177-182(.65")
12.725.4mm 952671 .65".8"/16. 5120.32mm 177-287(.8")
216557 952672 .8"1.0"/20.3225.4mm
568-978 1.0"2.0" 568-013 216557 952673 1.0"1.2"/25.430.48mm 177-289(1.2")
25.450.8mm 982149 1.2"1.6"/30.4840.64mm 177-291(1.6")
982150 1.6"2.0"/40.6450.8mm
568-979 2.0"4.0" 568-013 216558 982178 2.0"2.5"/50.863.5mm 177-315(2.5")
50.8101.6mm 982179 2.5"3.0"/63.576.2mm
982180 3.0"3.5"/76.288.9mm 177-319(3.5")
982181 3.5"4.0"/88.9101.6mm
568-980 2.0"4.0" 568-013 216558 04AZA047* 2.0"2.5"/50.863.5mm 177-315(2.5")
50.8101.6mm 2.5"3.0"/63.576.2mm
04AZA048* 3.0"3.5"/76.288.9mm 177-319(3.5")
3.5"4.0"/88.9101.6mm
* Two sets of interchangeable contact points are provided.
For SPC output order connecting cable 937387(40"/1m) or 965013(80"/2m).
N-31
N-32 (2003) full size 12/8/03 7:20 PM Page 1
BOREMATIC
568-988 LUT
SO E c
AB
Y
OG
EC
H N OL
T
Unit:Inch (mm)
N-32
N-33 (2003) full size 12/8/03 7:21 PM Page 1
SETTING RINGS
Setting Rings
Series 177
Specifications
Inch Metric
Order Outside Order Outside
Size No. Accuracy Diameter Width Size No. Accuracy Diameter Width
.1" 177-209 1.75mm 177-236
.16" 177-206 2.0mm 177-239 5mm
.98" .28"
.24" 177-207 2.25mm 177-242
.275" 177-281 2.5mm 177-208
.35" 177-179 2.75mm 177-246
.425" 177-283 1.26" 3.0mm 177-248
.50" 177-180 3.25mm 177-250
.6" 177-181 1.5" .39" 3.5mm 177-252 25mm
.65" 177-182 3.75mm 177-255
.70" 177-183 1.77" 4.0mm 177-204 7mm
.8" 177-287 4.5mm 177-257
1.0" 177-184 2.09" 5.0mm 177-205
1.2" 177-289 .00006" 5.5mm 177-263
1.4" 177-185 2.8" .59" 6.0mm 177-267
1.6" 177-291 6.5mm 177-271
1.8" 177-186 7.0mm 177-275
3.35"
2.0" 177-187 8.0mm 177-125
2.4" 177-293 .79" 10.0mm 177-126 32mm
2.5" 177-315 4.41" 12.0mm 177-284 0.0015mm
2.8" 177-188 14.0mm 177-132 38mm 10mm
3.0" 177-317 16.0mm 177-177
4.92"
3.2" 177-295 17.0mm 177-133 45mm
3.5" 177-319 20.0mm 177-286
5.51" .98"
3.6" 177-189 25.0mm 177-139 53mm
4.0" 177-297 6.3" 30.0mm 177-288
5.0" 177-299 8.27" 35.0mm 177-140 71mm 15mm
6.0" 177-301 9.25" 40.0mm 177-290
7.0" 177-303 10.24" 45.0mm 177-178
85mm
8.0" 177-305 .00010" 12.24" 1.5" 50.0mm 177-146
9.0" 177-307 13.27" 60.0mm 177-292
20mm
10.0" 177-309 14.25" 62.0mm 177-314 112mm
11.0" 177-311 16.26" 70.0mm 177-147
12.0" 177-313 17.24" 75.0mm 177-316
125mm
80.0mm 177-294
87.0mm 177-318 25mm
140mm
Metric 90.0mm 177-148
Order Outside 100.0mm 177-296 160mm
Size No. Accuracy Diameter Width 125.0mm 177-298 210mm
1.0mm 177-220 150.0mm 177-300 235mm
1.1mm 177-222 175.0mm 177-302 260mm
1.2mm 177-225 0.0015mm 20mm 4mm 200.0mm 177-304 0.0025mm 311mm 38.1mm
1.3mm 177-227 225.0mm 177-306 337mm
1.4mm 177-230 250.0mm 177-308 362mm
275.0mm 177-310 413mm
300.0mm 177-312 438mm
N-33
N-34 (2003) full size 12/8/03 7:24 PM Page 1
MSG Models
MLS Models
Specifications
MSG Models MLS Models
Measuring Channels
Air 1 standard, (optional to 4 maximum) 1 standard
LVDT optional to 8 maximum 2 standard
Digital optional 4, 8, 16 N/A
Measuring Programs 4 standard, optional 9 or 18 4 standard
Resolution .1m minimum .1 m minimum
Communication Ports
RS232C 1 standard (optional to 2 maximum) 1 standard
RJ485 optional (2x) 2 standard
USB optional N/A
Opto I/O standard standard
Ethernet standard N/A
Program switch Connector standard standard
Printer Port optional optional
The MSG model column is fully configurable to any air electronic application. Unit can act as master or slave in control feed
back environment. Display graphics are also configurable to your specific requirements. Please contact Mitutoyo America
Corporation representatives for further information.
The MLS model is offered as a limited measurement purpose device using a single air and two LVDT channels. LVDT's are 5
pin, half bridge style.
Mitutoyo also offers a complete line of air gage tooling to support our columns as well as the capability to supply tooling and
masters in many configurations for most competitive brands. In addition we can ship all gages with a long form certification
from our calibration labs.
N-34
N-35 (2003) full size 12/8/03 7:26 PM Page 1
CHAMFER-CHEK
Chamfer Chek
Series 526 I.D. Measures the top diameter of tapered holes and chamfers
O.D. measures the minor end diameter of tapered conical parts
I.D. O.D.
526-005C 526-008C
N-35
N-36 (2003) full size 12/8/03 7:28 PM Page 1
CHAMFER-CHEK
I.D. O.D.
547-480 547-482
Standard Accessories
Master Plate (64AAA012), 3"(W) x 2"(D) x .925"(H)
Black Leather Case (21BZA778) 9.7"(W) x 2"(D) x 6.1"(H)
*Wooden box (21BZA779) 12.8"(W) x 5.1"(D) x 3.63"(H)
* 547-481 (DC1-2090) only
N-36
N-37 (2003) full size 12/8/03 7:29 PM Page 1
HOLE-CHEK
Hole Chek
Series 526 Instant Diameter Measurement of Small Holes
526-003H 526-001H
Features Specifications
Ease of Operation: Simply insert the steel plunger into Accuracy: .001"
the hole and press firmly against the part and read the Graduation: .001" Dia.
diameter directly to three decimal places.
Gage Weight: 526-001H 1 lbs. (454g)
Resolution: Reads directly in .001" diameter incre- 526-002H 1 lbs. (454g)
ments. 526-003H 1 lbs. (454g)
Applications: Inspect PC boards, screw machine parts, 526-004H 1 lbs. (454g)
spray tips, injector nozzles, plastic molded parts.
Order No. Model No. Dia. Range
Standard Accessories 526-001H HC-0040 .010".040"
Wooden Box: 12.8"(W) x 5.1"(D) x 3.2"(H) 526-002H HC-0130 .030".130"
Granite Plate: 3"(W) x 2"(D) x .925"(H) (64AAAO12) 526-003H HC-0230 .130".230"
526-004H HC-0330 .230".330"
Optional Accessories
Setting Master (O.D. = .76"/H = .29")
Order No. Model No. Diameter
64AAA003 SM-040 .029"
64AAA004 SM-130 .078"
64AAA005 SM-230 .178"
64AAA006 SM-330 .278"
N-37