Académique Documents
Professionnel Documents
Culture Documents
3 2.14 2.13 2.14 2.13 2.05 2.15 LCLX 2.094 LCLR 0.000
Range 0.020 0.030 0.110 0.050 0.080 0.060 *any point outside of control
limits
*A Run of 7 points all above
central line, up or down
2.190 *Any obvious non-random
2.170
pattern
X
2.150
2.130 X 2.127
2.110
2.090 Sigma 0.031
2.070 UCL 2.300
2.050
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 LCL 1.900
ZUCL 5.528
ZLCL 7.279
Cpk 1.843
0.140
0.120
CONSTANTS Engineering Specs.
0.100 n D4 D3 A2 Diameter
2 3.27 * 1.88 2 +/-0.2
R
0.080
0.000
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0.060
0.040
0.020
5 2.11 * 0.58
0.000
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 6 2 * 0.48
7 1.92 0.08 0.42
INCR 8 1.86 0.14 0.37
Prepared by: 9 1.82 0.18 0.34
Checked by: 10 1.78 0.22 0.31
R CHART
R-CHART
0.058
6
0.123
0.000
CENTRAL LINES
0.058
2.127
0.031
2.300
1.900
5.528
7.279
1.843
Engineering Specs.
Diameter
+/-0.2
2.3
1.9
CONTROL CHART WARNING NOTICE
Notice No: 001
Issued Date: 15-Nov
Issued by: ver- Mfg. Engg
Detail
FANUC 3
Based on NSSA requested control 53 0/-0.1 (or 52.95 +/-0.05), control chart
detected a shifting of dimension 53 towards the maximum side (53)
Updated Stats (as of Nov.13)
Cpk 4.99
Ppk 0.87
Data distribution
FANUC 7
Based on NSSA requested control 53 0/-0.1 (or 52.95 +/-0.05), control chart
detected a shifting of dimension 53 towards the maximum side (53)
Updated Stats (as of Nov.13)
Cpk 6.40
Ppk 0.58
Data distribution