Académique Documents
Professionnel Documents
Culture Documents
1. NAME
Dr. PUTTI SRINIVASA RAO
2. CURRENT POSITION and ADDRESS
PROFESSOR
Dept. of Mechanical Engineering
Andhra University College of Engineering (Autonomous)
Andhra University
Visakhapatnam- 530003
Andhra Pradesh, India
Email: s_putti@rediff.com
psraumech@gmail.com
Mobile Number: +91-7093754678
4. DATE OF BIRTH
26th August, 1969.
1
5. ACADEMIC QUALIFICATIONS
3. Certificate Course in Advanced UNIX, C, and OOPS (C++) from Jawaharlal Nehru
Technological University (JNTU), Hyderabad, India, 1996, First Class with Distinction.
4. B.E (Mechanical Engineering) from Bangalore University, Bangalore, India, 1995, with
First Class
6. WORK EXPERIENCE
2
4. Associate Professor, Department of Mechanical Engineering, Pragathi Engineering College,
Surampalem, Near Kakinada, Andhra Pradesh, India, from September 2004 to June 2005.
7. ADMINISTRATIVE EXPERIENCE
1. Nominated as External Examiner for conducting 4/4 B.E (Mechanical Engineering) CAD
Lab Examinations Held at Sir C.R.Reddy College Of Engineering, Eluru from 9-4-2014 to
10-4-2014.
3. Nominated as Teacher Expert for conducting Ph.D Viva-Voce Examinations of Sri Beera
Avinish Ben, Mechanical Engineering Department, Andhra university college Engineering
(Autonomous), Visakhapatnam, February 2013.
6. Organizing Industrial Tour for 2nd year Mechanical Engineering students, Andhra university
college Engineering (Autonomous), Visakhapatnam, May 2012.
7. Chief Examiner on the recommendation of the Head of the Department / Chairman Board of
studies for the spot valuation of 4/4 B.E/B.Tech, 2nd Semester Spot Valuation (2011-2012) for
3
the subject: Instrumentation and control system, Andhra University College of Engineering
(Autonomous), Andhra University, Visakhapatnam, April 2012.
8. Appointed as Observer for conducting AUCET-2012, Examination Centre: Sir C.R. Reddy
College, PG Courses, Eluru, being held during 26th-28th, April 2012.
9. Chief Superintendent for conducting 4th year B.E / B.Tech / B.Arch, 1st and 2nd Semester
Examinations, Andhra University College of Engineering (Autonomous), Andhra University,
Visakhapatnam, June 2011.
11. Appointed as Observer for conducting EMCET-2011, Examination Centre: Andhra Medical
College, Visakhapatnam, being held on 8th, May 2011.
12. Appointed as Route Officer for conducting EMCET-2011, Examination Centre: Andhra
Medical College, Visakhapatnam, being held on 8th, May 2011.
13. Chief Teacher Associate for conducting 4th year B.E/ B.Tech, 1st and 2nd Semester spot
valuation, Andhra University College of Engineering(Autonomous), Andhra University,
Visakhapatnam, June 2011.
4
17. Chief Superintendent for conducting M.E/ M.Tech / M. Planning, 2nd Semester and 4th year
B.E / B.Tech, 1st and 2nd Semester Examinations, held at Andhra University College of
Engineering (Autonomous), Andhra University, Visakhapatnam, July 2008.
18. Chief Superintendent for conducting, 2nd year 2nd Semester Examinations, held at Andhra
University College of Engineering (Autonomous), Andhra University, Visakhapatnam, April
2008.
19. Chief Teacher Associate for conducting, 2nd year 2nd Semester spot valuation, held at
Andhra University College of Engineering (Autonomous), Andhra University,
Visakhapatnam, April 2008.
20. Chief Teacher Associate for conducting M.E/ M.Tech/M.Planning, 3rd Semester spot
valuation, held at Andhra University College of Engineering (Autonomous), Andhra
University, Visakhapatnam, November 2007.
21. Chief Superintendent for conducting M.E/ M.Tech/M.Planning, 3rd Semester Examinations,
held at Andhra University College of Engineering (Autonomous), Andhra University,
Visakhapatnam, November 2007.
22. Chief Teacher Associate for conducting 4/4 B.E/ B.Tech, 1st and 2nd Semester and 1/3, 2/3,
3/3 B.E Special supplementary spot valuation, held at Andhra University College of
Engineering (Autonomous), Andhra University, Visakhapatnam, July 2007.
23. Chief Superintendent for conducting, 4/4 B.E/ B.Tech, 1st and 2nd Semester Examinations,
held at Andhra University College of Engineering (Autonomous), Andhra University,
Visakhapatnam, June 2007.
24. Chief Superintendent for conducting a Special Examinations to the B.Sc applied sciences,
B.P.S and B.A/B.Sc Computer Science (One Year Course), held at Andhra University
College of Engineering (Autonomous), Andhra University, Visakhapatnam, May 2007.
5
26. Laboratory in charge for Instrumentation and Stress Analysis (I & SA) Laboratory,
Mechanical Engineering Department, Andhra university college Engineering (Autonomous),
Visakhapatnam from 2007 onwards.
8. AREAS OF INTEREST
3. Life Member, Indian Society for Technical Education, India (ISTE). [LM-86812]
a) UNDERGRADUATE LEVEL
1. Instrumentation and Control systems (I&CS), for B.E / B.Tech Mechanical Engineering
4th year students at both Sir C.R. Reddy College of Engineering, Eluru and in Andhra
University College of Engineering (Autonomous), Andhra University, Visakhapatnam.
6
3. Machine Design (MD) for B.E / B.Tech Mechanical Engineering 3rd year students at both
Sir C.R. Reddy College of Engineering, Eluru and in Andhra University College of
Engineering (Autonomous), Andhra University, Visakhapatnam.
4. Theory of Machines (TM) for B.E / B.Tech Mechanical Engineering 3rd year students at
both Sir C.R. Reddy College of Engineering, Eluru and in Andhra University College of
Engineering (Autonomous), Andhra University, Visakhapatnam.
5. Engineering Graphics (EG) for B.E / B.Tech Electronics and communication Engineering
(ECE), Electrical and Electronics Engineering (EEE) 1st year students at in Andhra
University College of Engineering, Andhra University (Autonomous), Visakhapatnam
6. Engineering Mechanics (EM) for B.E / B.Tech Mechanical Engineering 1st year students in
Pragathi Engineering College, Surampalem, Near Kakinada.
7. Applied Thermodynamics-2 for B.E / B.Tech Mechanical Engineering 3rd year students at
Sir C.R. Reddy College of Engineering, Eluru.
8. Finite Element Analysis (FEA) for B.E / B.Tech Mechanical Engineering 4th year students
at Sir C.R. Reddy College of Engineering, Eluru.
1. Mechanical Vibrations (MV) for M.E / M.Tech Mechanical Engineering 1st year 1st
semester students in Andhra University College of Engineering, Andhra University
(Autonomous), Visakhapatnam-530003, India.
2. Mechanics of Machinery (MOM) for M.E / M.Tech Mechanical Engineering 1st year 1st
semester students in Andhra University College of Engineering (Autonomous), Andhra
University, Visakhapatnam-530003, India.
3. Instrumentation and Experimental stress analysis (IESA) for M.E / M.Tech Mechanical
Engineering 1st year 2nd semester students in Andhra University College of Engineering
(Autonomous), Andhra University, Visakhapatnam-530003, India.
7
11. INFRASTRUCTURE DEVELOPMENT RELATED WORK
1. Coordinator, for Two day National Workshop on Vibrations and Health Monitoring of
Engineering Infrastructures (VHMEI-2014) Organized by Department of Mechanical
Engineering, Andhra University College of Engineering (Autonomous), Andhra University,
Visakhapatnam-530003, 3rd to 4th January 2014.
3. Organizing Committee Member, One Day National Conference for Researchers On Latest
Innovations In Mechanical Engineering (LIME-2013) Under TEQIP-II, organized by
Department of Mechanical Engineering, Andhra University College of Engineering
(Autonomous), Andhra University, Visakhapatnam-530003, 28th April 2013
4. Technical Session Chair for paper presentation, i-Genesis-2012 Technical Symposium held
at Andhra University College of Engineering (Autonomous), Visakhapatnam, September
2012.
8
7. Organizing Committee Member, International Seminar on Modeling, Simulation and
Manufacturing systems-2008, held at Department of Mechanical Engineering, Andhra
University college of Engineering (Autonomous), Visakhapatnam, 29th 30th June 2008.
1. Putti Srinivasa Rao, Revu Venkatesh, Static and Transient Analysis of leaf spring
Using Composite Material IUP Journal of Mechanical Engineering, September-
November 2015 (ISSN: 0974-6536 )Accepted for publication.
2. Putti Srinivasa Rao, Revu Venkatesh, Modal and Harmonic Analysis of Leaf Spring
Using Composite Materials International Journal of Novel Research in Electrical and
Mechanical Engineering, Volume 2, Issue 3, 2015 (ISSN: 2394-9678).
3. Putti Srinivasa Rao, Nadipalli Sriraj, Mohammad Farookh, Contact Stress Aalysis of
Spur Gear for Different Materials using ANSYS and Hertz Equation International
Journal of Modern Studies in Mechanical Engineering (IJMSME), Volume 1, Issue 1, pp
45-52, June 2015.
6. Putti Srinivasa Rao, Ch.Ratnam, Vibration Based Damage Identification Using Burgs
Algorithm and Shewhart Control Charts Journal of ASTM International, Vol. 8, No. 4,
Paper ID JAI103474, 2011, Published by ASTM International (USA) (ISSN:1546-962X).
9
7. Putti Srinivasa Rao, Ch.Ratnam, Damage Identification of Welded Structures Using
Time Series Models and Exponentially Weighted Moving Average Control Charts
Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Volume 4, No. 6,
December 2010, Published by JJMIE, Jordan (ISSN: 1995-6665).
1. Putti Srinivasa Rao and P. S. Shanmukha Babu, Vibration Analysis of Circular Cross-
Section Cantilever Beam with Multiple Breathing Cracks, communication, control,
Instrumentation and computational technologies, Conducted by R.L Jalappa Institute of
Technology, held on 17th dec 2015, Doddaballapur, Near Bangalore, Karnataka State.
10
4. Putti Srinivasa Rao, G.Bhanu Kiran, Free vibrations and buckling of isotropic and
composite truncated conical shell 51st Congress of ISTAM ( An International Meet ),
Department of Mechanical Engineering, Andhra University college of Engineering
(Autonomous), Visakhapatnam, 18th 21st December 2006.
2. Ch.Srinivasa Rao, R.R. Srikanth and Putti srinivasa Rao, Recognition of Machine
Cells in a Group Technology Layout Via Art-2 Neural Network Proceedings of the first
National Conference development and challenges in Manufacturing Engineering-2004,
Manipal Institute of Technology, MAHE, Deemed University, Manipal-576104, India.
11
3. Attended the International conference on Statistics, Probability, Operations Research,
Computer Science and Allied Areas in conjunction with VIII International Indian Statistical
Association joint statistical meeting and XXIX Annual Convention of Indian Society for
Probability and Statistics, and presented paper on Acceleration residual generation approach
using Time Series Models for vibration based damage identification Andhra University,
Visakhapatnam, from 4th 8th January 2010.
4. One day workshop on The 3D modeling & Design validation software, solid works &
Manufacturing solution, CAM works, held at Gayatriidya parishad College of Engineering
Visakhapatnam on 20-8-2009
5. Three day Workshop on Fatigue, Fracture and Creep of materials and components, held at
Department of Mechanical Engineering, Andhra University college of Engineering
(Autonomous), Visakhapatnam, from 23rd 25th March 2009.
6. Two day workshop on Finite Element Analysis (FEA) of Fatigue, Durability, held at
ProSIM, Bangalore, from 27th -28th February 2009.
8. Attended the 51st Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM)
(An International Meet), and presented paper onFree vibrations and buckling of isotropic
and composite truncated conical shell Department of Mechanical Engineering, Andhra
University college of Engineering (Autonomous), Visakhapatnam, 18th 21st December
2006.
9. Short-term training program on Finite Element Solutions for Machine Dynamics & Heat
Transfer Problems Sponsored by I.S.T.E, organized by Department of Mechanical
Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram, Krishna District,
Andhra Pradesh, India, During 26th -30th June 2006.
12
10. Short-term Course on Instructional Design and Delivery Conducted by National Institute
of Technical teachers training& research, Chennai, Government of India, Ministry of Human
resource Development, from 12th 17th June 2006.
11. Attended the International Conference on Advances in Structural Dynamics and its
applications (ICASDA) and presented paper on Condition Monitoring of Air Blower Using
Artificial Neural Network held at GITAM, Visakhapatnam 7th -9th December 2005.
12. Three day National Workshop on Design and Production aspects in Mechanical
Engineering, held at Department of Mechanical Engineering, Maharaj Vijayaram
Gajapathiraj College of Engineering, Vizianagaram-535005, from 8th 10th January 2004.
13
4. Sri Santoshi K (680320010), Ravichandra P (680320023) and Venkata Naresh Kumar
(680320031), Determination of natural Frequencies of a Plate by using Finite element
method Project Thesis of 4th year B.E/B.Tech(Regular) Mechanical Engineering students,
Department of Mechanical Engineering, Andhra University College of Engineering
(Autonomous), Visakhapatnam, 2011.
6. M.Ravi Kiran (63032023), G.Rajiv Sairam (63032036), G.Mahesh Srinu (63023022) and
D.Kamala (63032018), Reduction of cassette bearing faults in MMSM &ITs analysis and
Remedies Project Thesis of 4th year B.E/B.Tech(Regular) Mechanical Engineering students,
Department of Mechanical Engineering, Sir C.C. Reddy College of Engineering, Eluru,2006.
7. G.Bhanu Kiran (99608), M.V.R. Yugandhar (99660), Ch. Kamal Kumar (99619), J.K.Raju
(99620) and A.lakshmaiah (99625) Maintenance of Fuel injection system in multi-cylinder
diesel engine- A case study Project Thesis of 4th year B.E/B.Tech (Regular) Mechanical
Engineering students, Department of Mechanical Engineering, Sir C.C. Reddy College of
Engineering, Eluru,2002.
10. Malleshwarapu Shrinivasa (07-TM-00140) Design And Structural Analysis Of Wing Rotor
Project Thesis of 4th year B.E/B.Tech(SDE) Mechanical Engineering student, Department of
14
Mechanical Engineering, Andhra University College of Engineering (Autonomous),
Visakhapatnam, 2013.
15
7. Rama Krishna Ravada ( 312207033002 ) Design and Dynamic Analysis of Ship
Propeller Shaft to Improve Damping Factor Thesis of 2nd year M.E (Machine Design)
Mechanical Engineering student, Department of Mechanical Engineering, Andhra
University College of Engineering (Autonomous), Visakhapatnam, 2013.
9. Chaitanya Baki ( 312207033015 ) Design and analysis of Knuckle Joint Using Finite
Element Method Thesis of 2nd year M.E (Machine Design) Mechanical Engineering
student, Department of Mechanical Engineering, Andhra University College of
Engineering (Autonomous), Visakhapatnam, 2013.
1. P.V.S. Chinnaji ( 314207033010 ) Thesis of 2nd year M.E (Machine Design) Mechanical
Engineering student, Department of Mechanical Engineering, Andhra University College
of Engineering (Autonomous), Visakhapatnam, 2015.
16
3. N.Saralika ( 314207033009 ) Thesis of 2nd year M.E (Machine Design) Mechanical
Engineering student, Department of Mechanical Engineering, Andhra University College
of Engineering (Autonomous), Visakhapatnam, 2015.
Main Guide:
1. L. Ramesh Part-Time Ph.D Mechanical Engineering student, Department of Mechanical
Engineering, Andhra University College of Engineering (Autonomous), Visakhapatnam,
2014.
17
4. Satyanarayana Tirlangi Part-Time Ph.D Mechanical Engineering student, Department of
Mechanical Engineering, Andhra University College of Engineering (Autonomous),
Visakhapatnam, 2014.
Co-Guide:
1. Co-Author for Design of Machine Elements (DMMEC-305) for 3rd year B.E/B.Tech
(School of Distance Education) Mechanical Engineering students, Department of Mechanical
Engineering, Andhra University College of Engineering(Autonomous), Visakhapatnam, year
of Publication 2008.
2. Co-Author for Instrumentation and Control System (DMMEC-301) for 3rd year B.E/B.Tech
(School of Distance Education) Mechanical Engineering students, Department of Mechanical
Engineering, Andhra University College of Engineering(Autonomous), Visakhapatnam, year
of Publication May 2008.
18