Académique Documents
Professionnel Documents
Culture Documents
Corners (roundings)
Technical University of Gabrovo Georgi Rashev
3
Fig.1 Roundings in products
Corners (roundings) - 1
CAE DS Injection Casting Design
Collecting Non-
angles collecting
angles
The corner radii of internal edges and external angles are determined from the
internal angles using the formula
R r + a, mm where R corner radius of external wall
r corner radius of internal wall
a wall thickness
r
r
R
Fig. 2. Corner radii
Rounding of internal and external edges of products of greater depth are made
with a constant or variable radius along the edge. Recommended minimum corner
radii of internal edges are given in Table 2.
If necessary, wall thickness in the area of the corner radius can be thickened. For
products having a wall thickness from 2 to 4 mm, the recommended fillet is at least
1 mm.
Corners (roundings) - 2