Académique Documents
Professionnel Documents
Culture Documents
|
Solutions Product
TRAINING
features and benefits | The Enhanced Management Frame (EMF) is designed
for FTTx, cross-connect and interconnect applications.
|
Individual 12-fiber Maximize scalability and
The integrated modular design allows growth and
|
COPPER CONNECTIVITY
The EMF utilizes a single 12-fiber module that may
be configured with splitters/couplers and wavelength
division multiplexers (WDMs) that support todays FTTx
passive optical networks. Other module options include
pigtailed, stubbed, empty and with adapters only. Each
module extends and retracts independently from the
|
frame for minimal adjacent connector disturbance and
HARDWARE
a quiet-front appearance. Splicing facilities within the
module maintain the maximum 1728-fiber terminations
with SC and LC connectors.
|
CABLE ASSEMBLIES
Integrated fiber management within modules will store
3 m of buffer tube or ribbon slack and 1 m of 900 m
pigtail slack.
|
available for both the left and right side of the frame.
CONNECTORS
|
CABLES
|
PRETERMINATED SYSTEMS
Optional Full-Length
Rear Troughing System
Protective Lower
Fiber Cover
Wide Fiber Routing Area with
Separate Routing Zones
|
Solutions Product
TRAINING
Transparent Module for Individual 12-Fiber Access Module Handle Folds Down for
Easy Internal Inspection from Sliding Module Enhanced Connector Access Full Radius Control
|
SPLICE AND TEST EQUIPMENT
|
COPPER CONNECTIVITY
|
HARDWARE
EMF Module | Photo FOH032
Front-Loading Housing;
|
Staggered Side-Routing Guides Six 12-Fiber Modules in each
CABLE ASSEMBLIES
Prevent Jumper Stack-Up Housing Terminate 72 Fibers
|
CONNECTORS
|
CABLES
|
PRETERMINATED SYSTEMS
Fiber Buffer-
Tube End and 900 m or
Strain-Relief 250 m Fiber
(cable tie)
1.0 m
900 m Pigtail
900 m
Pigtail
Left Module (Bottom View) | Drawing ZA-931 Modules per Housing and Frame | Drawing ZA-921
|
Solutions Product
TRAINING
Housings and Modules
Housings and modules for the EMF are available
|
in four configurations:
|
COPPER CONNECTIVITY
EMF Module, 12-Fiber | Photo FOH011
specifications |
Adapter Capacity
|
Adapter Terminations Terminations Terminations
HARDWARE
Type per Module per Housing per Frame
SC 12 72 1728
LC 12 72 1728
FC 12 72 1728
|
CABLE ASSEMBLIES
ordering information |
Dimensions
|
Part Number Description (H x W x D) cm (in)
CONNECTORS
Housings Empty
CCF - CML - Left EMF Housing with adapters 13.97 x 21.84 x 29.84
|1 |2
and modules installed (5.5 x 8.6 x 11.75)
CCF - CMR -
Right EMF Housing with adapters 13.97 x 21.84 x 29.84
and modules installed (5.5 x 8.6 x 11.75)
|1 |2
CCF - CML - - SL
Left EMF Housing with SearchLite 13.97 x 21.84 x 29.84
Tracing System adapters and (5.5 x 8.6 x 11.75)
|1 |2 modules installed (SC UPC only)
CCF - CMR - - SL
Right EMF Housing with SearchLite 13.97 x 21.84 x 29.84
Tracing System adapters and (5.5 x 8.6 x 11.75)
|1 |2 modules installed (SC UPC only)
|1 |2 Notes:
1) Maximum FC and SC adapter
capacity is 12 per module.
Select number of Select adapter code.
adapters. Single-Mode Multimode 2) Maximum LC adapter capacity
00 = Empty module 3C = SC ultra 39 = SC is 6 duplex per module.
01-12 = 1-12 adapters 6C = SC angled 17 = FC
A9 = LC duplex ultra A7 = LC duplex
B3 = LC duplex angled
11 = FC ultra
21 = FC angled
CCF-CML-726C Left EMF Housing loaded with modules, 72 SC APC adapters installed
|
Solutions Product
TRAINING
ordering information | (continued)
|
Dimensions
|1 |2
specify adapter provision type from (0.9 x 8.6 x 11.75)
charts below
CCMR -
Right Module with adapters installed; 2.24 x 21.92 x 29.84
specify adapter provision type from
|1 |2
(0.9 x 8.6 x 11.75)
charts below
|
CCML - - SL
COPPER CONNECTIVITY
Left Module with SearchLite Tracing 2.24 x 21.92 x 29.84
System adapters installed (SC UPC
|1 |2
(0.9 x 8.6 x 11.75)
only); specify adapter provision type
from charts below
CCMR - - SL
Right Module with SearchLite Tracing 2.24 x 21.92 x 29.84
System adapters installed (SC UPC
|1 |2
(0.9 x 8.6 x 11.75)
only); specify adapter provision type
from charts below
|
HARDWARE
Note: Stubbed or pigtailed housings are available separately in a wide array of configurations. Each complete housing can accommodate
up to six modules. Stubbed or pigtailed modules are also available separately in the same array of configurations. Individual modules can
be easily loaded into unused positions within a previously installed housing. Contact your Corning Cable Systems Customer Service
Representative for module and housing ordering information at 800-743-2675 or internationally at +1-828-901-5000.
|
CABLE ASSEMBLIES
|1 |2 Notes:
1) Maximum FC and SC adapter
capacity is 12 per module.
Select number of Select adapter code.
adapters. Single-Mode Multimode 2) Maximum LC adapter capacity
00 = Empty module 3C = SC ultra 39 = SC is 6 duplex per module.
|
01-12 = 1-12 adapters 6C = SC angled 17 = FC
CONNECTORS
A9 = LC duplex ultra A7 = LC duplex
B3 = LC duplex angled
11 = FC ultra
21 = FC angled
|
Part Number Example CABLES
CCMR 00-A7 Right EMF Module - Empty (no adapters) - LC type mountings installed for future adapters.
|
M - - 1 0
|1 |2 |3 |4 |5 |6 |7 |8
|1 |4 |6 |8
Select hardware type. Select fiber count Select mode of Select jumper tracing
CC = Pigtailed housing of each module. operation. option.
CM = Pigtailed module 01-12 R = Single-mode - = No jumper tracing
|2
Example: K = Multimode 62.5/125 m S = SearchLite Tracing
6 fibers = 06 C = Multimode 50/125 m System (SC UPC only)
12 fibers = 12
|7
|5
Select hardware
mounting side.
R = Right Select pigtail type. Notes:
L = Left Select connector type. J = Ribbon 1) Housings are shipped
Single-Mode H = MIC 900 m individually with a maximum
|3
3C = SC ultra buffered fiber fiber count of 72.
6C = SC angled
A9 = LC duplex ultra 2) Pigtailed modules ship with
both Q-Pak and heat-shrink
Select total fiber count. B3 = LC duplex angled
holders.
11 = FC ultra
01-72 = Enter number
12 = FC angled
Example:
6 fibers = 06 Multimode
12 fibers = 12 39 = SC
72 fibers = 72 17 = FC
A7 = LC duplex
See Note 1.
CCL72M12-3C-1RJ-0 Pigtailed Left-Hand EMF Housing, total fiber count is 72 fibers using 12-fibers per module,
connectors are SC UPC, pigtail type is a 1 m single-mode ribbon
CMR12M12-6C-1RH-0 Pigtailed Right-Hand EMF Module, 12-fibers, connectors are SC APC, pigtail type is 1 m
MIC 900 m buffered fiber
|
Solutions Product
TRAINING
ordering information | (continued)
Housing and Modules with Stubbed Cable
|
SPLICE AND TEST EQUIPMENT
- 1
|1 |2 |3 |4 |5 |6 |7 |8 |9
|1 |4 |7 |8
Select hardware type. Select cable length Select cable type. Select special options.
CCF = 72-fiber EMF housing in meters. 900 m Coated Fiber Cables 00 = Standard configuration
|
CCM = 12-fiber EMF module 1-99 = Enter number 81 = MIC Riser Indoor SL = SearchLite Tracing
COPPER CONNECTIVITY
Cable with TBII System (SC UPC only)
|2-9
99+ = Enter alphanumeric
Buffered Fiber
|9
code from Table A
88 = MIC Plenum Cable with
|5
Flexible TBII Buffered
Select hardware Fiber
250 m Coated Fiber Loose See selection block 2.
mounting side. Tube Cables (2-144 fibers)
R/B = Right side housing Select connector type.
Single-Mode W4 = ALTOS All-Dielectric
with cable entry at Outside Plant Cable
|
top right 3C = SC ultra
6C = SC angled W5 = ALTOS Single-Armored
HARDWARE
L/C = Left side housing Outside Plant Cable
with cable entry at A9 = LC duplex ultra
B3 = LC duplex angled W6 = ALTOS Double-Armored Note:
top left Outside Plant Cable 1) One housing shipped for 1-72
Multimode
|3
W7 = ALTOS Riser Cable fibers. Two housings shipped for
39 = SC WZ = ALTOS LSZH Cable 144 fibers.
|
17 = FC WF = FREEDM Indoor/
CABLE ASSEMBLIES
A7 = LC duplex Outdoor Cable 2) Not all part number
Select total fiber count. A8 = LC duplex Ribbon Fiber Cables configurations are available.
|6
01-72 = Enter number (12-144 fibers) Please confirm availability
E4 = 144 fibers C4 = SST-Ribbon with a Corning Cable
Example: All-Dielectric Outside Systems Customer
12 fibers = 12 Plant Cable Service Representative.
144 fibers = E4 Select fiber type. C5 = SST-Ribbon Single-
- = Single-mode Armored Outside
|
See Note 1.
K = Multimode 62.5/125 m
CONNECTORS
Plant Cable
C = Multimode 50/125 m C6 = SST-Ribbon Double-
Armored Outside
Plant Cable
C7 = Ribbon riser cable
CF = FREEDM Ribbon
|
Riser Indoor/Outdoor
Cable CABLES
CCFL7231-3C-C7SL1C Left-Hand 72-Fiber Stubbed EMF Housing with 31 m of single-mode ribbon riser cable attached
and terminated with SC UPC connectors featuring SearchLite Tracing System adapters; cable
enters from the top
|
Examples: Notes:
1) I and O are not used.
E4 = 144 fiber 2) Lengths from 100 to 339, use single letter plus number (1 to 9).
A5 = 105 m 3) Lengths over 339 m can be ordered only in 10 m increments.
|
Solutions Product
TRAINING
Network Bay Frame
4.5 Ft EMF Extention Enhanced Management Frame (EMF)
|
SPLICE AND TEST EQUIPMENT
|
COPPER CONNECTIVITY
4.5 ft EMF Extension Kit (CCF-FRAME-EXT-7-11)
|
| Drawing ZA-3598 EMF Frame (CCF-FRAME-7) | Drawing ZA-3599
ZA-3599
HARDWARE
ZA-3598
ordering information |
|
Dimensions
CABLE ASSEMBLIES
Part Number Description (H x W x D) cm (in)
Empty Frame
CCF-FRAME-7 7 ft EMF Frame 213.4 x 86.4 x 43.12
(84 x 34 x 17)
|
CCF-FRAME-EXT-7-8 1 ft EMF Frame Extension Kit 30.5 x 86.4 x 43.2
CONNECTORS
(12 x 34 x 17)
(2 x 34 x 5.6)
PRETERMINATED SYSTEMS
CCF-PAD-KIT Isolation Pad Kit for EMF frame (includes mounting hardware) 86.4 x 43.12 (34 x 17)
|
CCF-LRG-CAB-BKT Large Cable Strain-Relief Bracket, for cable dimensions 2.06 (0.81)
above 0.81 in. Includes 1 bracket and all supporting
hardware
A0388959 Cable Bonding Kit; includes four 14-in ground wire N/A
assemblies, one 4 position ground bar and hardware
to bond cables to frame ground
Notes:
1) Strain-relief components not required when using housings.
2) Each EMF Frame ships with 12 cable clamp assemblies. Strain-relief grips are sold separately.
Cable Strain Relief Bracket
Clamps
|
Solutions Product
TRAINING
Front-Mounting Workshelf
EMF front-mounting workshelf provides a convenient
|
workspace for craft persons. The shelf is capable of
|
COPPER CONNECTIVITY
EMF Workshelf | Photo FOH026
|
HARDWARE
ordering information |
|
Dimensions
Part Number
CABLE ASSEMBLIES
Description (H x W x D) cm (in)
|
CONNECTORS
|
CABLES
|
PRETERMINATED SYSTEMS
|
An Evolant
Solutions Product
ordering information |
Y
MLS1AAB30B301132 EMF Left-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters
MRS1AAB30B301132 EMF Right-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters
MLS1AAB30B302116 EMF Left-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters
MRS1AAB30B302116 EMF Right-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters
Jumpers
2.0 mm jumpers recommended length within frame is 5 m. See EVO-29-EN for ordering information.
See SRP 003-599 for additional jumper recommendations.
|
Solutions Product
TRAINING
Inter-Bay Distribution (IBD) End Cap and Door Cover
EMF_IBD_Install
EMF inter-bay distributors are designed to be placed EMF end caps protect the end of a bay line-up while
|
between two EMFs and are usedEMF_End
to store and manage providing a clean, finished appearance. A dual door
|
COPPER CONNECTIVITY
|
HARDWARE
EMF Inter-Bay Dual Storage EMF End Cap EMF Dual Door Front Cover
Unit (IBD) | Drawing ZA-3246 | Drawing ZA-3250 | Drawing ZA-3251
|
CABLE ASSEMBLIES
ordering information |
ZA-3246
ZA-3251
ZA-3250
Dimensions
Part Number Description (H x W x D) cm (in)
CCF-IBD-T3 IBD designed exclusively for use with the EMF; features 213.4 x 12.7 x 30
|
left-to-right fiber routing, internal slack storage and (84 x 5 x 12)
CONNECTORS
front-to-rear feed through
CCF-IBD-EC-7 Contains the CCF-IBD-T3 and the CCF-EC-7 end cap 213.4 x 12.7 x 30
shipped together to create a single kit for ending a bay (84 x 5 x 12)
line-up with slack storage and end protection
|
CCF-COVER-7 Simple One-Piece Decorative Lift-Off Front Panel Cover 206 x 86.4 x 2.54
for the front of the EMF CABLES
(81 x 34 x 1)
CCF-COVER-2-7 Dual-Door Lift-Off Front Cover panels for the EMF, 206 x 86.4 x 2.54
provides individual access to the left or right column (81 x 34 x 1)
|
of termination housings
PRETERMINATED SYSTEMS
CCF-EC-7 Decorative End Cap for protecting the end of 213.4 x 38.1 x 2.54
a bay line-up (84 x 15 x 1)
CCF-IBD-PAD-KIT Isolation Pad for EMF IBD (mounting hardware 40.3 x 19.8
not required) (15.9 x 7.9)
|
An Evolant
Solutions Product
CCF-IBU-FMS-C
S-7-L CCF-IBU-FMS-7-R CCF-IBU-FMS-7-LF CCF-IBU-FMS-7-RF
ZA-2629
|
Solutions Product
TRAINING
ordering information |
|
Dimensions
|
COPPER CONNECTIVITY
CCF-IBU-FMS-7-LF IBU that feeds fiber from an FMS to an EMF positioned 84 x 12 x 5
on the left; hardware order looking from the front and (213.4 x 30 x 12.7)
left to right is EMF-IBU-FMS; suitable only for EMF and
FMS frames positioned with flush front-most surfaces
|
CCF-IBU-FMS-C Center IBU for use with an FMS positioned directly 84 x 12 x 5
HARDWARE
between two EMF frames; two IBUs shipped per kit (213.4 x 30 x 12.7)
|
CABLE ASSEMBLIES
|
CONNECTORS
|
CABLES
|
PRETERMINATED SYSTEMS
|
#12-24
Thread
Cutting
Right Rear Trough
Screws
specifications |
Trough to be Used on UDF Frame and IBD Unit Arrangement
ordering information |
Part Number Description
Transition Equipment
|
Solutions Product
TRAINING
Frame Components
Equipment Racks
|
The backbone of each distribution bay is its equipment
|
COPPER CONNECTIVITY
|
HARDWARE
4.5 ft extension 7 ft UDF frame
|
ordering information |
CABLE ASSEMBLIES
Dimensions Shipping
Part Number Description (H x W x D) cm (in) Weight kg (lb)
Equipment Racks
|
UDF-ERO-23E-07-000 7 ft Unequal Flange Equipment Rack, 213.4 x 65.8 x 25.7 22.6 (50)
CONNECTORS
23 in, platinum (84.0 x 25.9 x 10.1)
UDF-ERO-19E-07-000
7 ft Unequal Flange Equipment Rack, 213.4 x 55.6 x 25.7 22.6 (50)
19 in, platinum (84.0 x 21.9 x 10.1)
Extensions
|
CABLES
UDF-EXT-23E-02-000 2 ft Rack Extension for use with 60.9 x 65.8 x 25.7 9.1 (20)
UDF rack (23 in), platinum (24 x 25.9 x 10.1)
UDF-EXT-19E-02-000 2 ft Rack Extension for use with 60.9 x 55.6 x 24.4 8.2 (18.1)
|
UDF-EXT-23E-04-000 4.5 ft Rack Extension for use with 137 x 65.8 x 25.7 15 (33.1)
UDF rack (23 in), platinum (54 x 25.9 x 10.1)
UDF-EXT-19E-04-000 4.5 ft Rack Extension for use with 137 x 55.6 x 24.2 14 (31)
UDF rack (19 in), platinum (54 x 21.9 x 9.6)
|
Solutions Product
UDF-EC-7
Frame Components
End Caps
2.5" 2.5"
Foot Caps
Foot caps are a protective covering at the base of
the rack that allow mounting of A/C outlets that are
required in the frame system.
84" 84
12" 15"
ordering information |
Dimensions Shipping
Part Number Description (H x W x D) cm (in) Weight kg (lb)
End Caps
UDF-ECO-07-000 End Cap for 7 ft unequal flange 212.4 x 7.6 x 30.5 15.9 (35.0)
rack (UDF) (83.6 x 3.0 x 12.0)
UDF-EC-EXT-7/9 2 ft End Cap Extension for unequal 60.9 x 7.6 x 30.5 4.5 (10.0)
flange rack (UDF) (24.0 x 3.0 x 12.0)
UDF-EC-EXT-7/11 4.5 ft End Cap Extension for 137.0 x 7.6 x 30.5 10.2 (22.5)
unequal flange rack (UDF) (54.0 x 3.0 x 12.0)
UDF-IBU-7-1 Inter-Bay Storage Unit with jumper 213.1 x 12.1 x 15.2 9.1 (20.0)
trough, UDF (84.0 x 4.75 x 6.0)
An Evolant
|
Solutions Product
TRAINING
Frame Components
Jumper Troughs and Jumper Trough Bridges
|
Jumper troughs organize and protect jumpers routed
|
ZA-1538
COPPER CONNECTIVITY
|
HARDWARE
UDF Standard Trough | Drawing ZA-2848
|
CABLE ASSEMBLIES
ordering information |
8
ZA-284
Dimensions
Part Number Description (H x W x D) cm (in)
|
CONNECTORS
UDF-JT-23T UDF Upper Trough for 23-in, platinum 10 x 65.5 x 12.7
(3.97 x 25.81 x 5.00)
installation information |
For further details on how to install Corning Cable Systems Enhanced Management Frame (EMF) products, please refer to the
following Corning Cable Systems recommended procedures:
| PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | COPPER CONNECTIVITY | SPLICE AND TEST EQUIPMENT | TRAINING |
Enhanced Management Frame (EMF) An Evolant
Solutions Product
notes |