Académique Documents
Professionnel Documents
Culture Documents
The Role
The New Programs Engineer is responsible for designing, developing, and delivering prototype level components and
systems for the Tesla Model S program as well as future Tesla product programs.
This position requires frequent interaction with the Vehicle Engineering team and Design team using input from
Interior, Exterior, BIW and Closures.
Responsibilities
The successful candidate must have the ability to meet tight deadlines, have strong interpersonal and communication
skills, be detail oriented, and have the ability to work independently. He/she must establish and maintain a
professional working relationship with external and internal teams at all levels across the company. Typical job duties
may include but are not limited to the following,Conceptualize Design, Release, Develop assigned
components/systems, including:
Create vehicle-aligned component and system targets for function, cost, weight and investment.
Support creation of component specification, component DFMEA, and other technical design documents.
Work with the Design Studio and Vehicle engineering team to resolve feasibility issues.
Optimize the concepts and designs with analytical and physical assessments.
Interface with suppliers for manufacturing feasibility, validation, and other engineering activities as specified for the
assigned commodity. Note that in most cases, Tesla Vehicle Engineering will design commodities for the Model S
in-house.
Deliver designs and other program deliverables on time and within budget .
Ensure designs are compatible with the assembly process and are serviceable.
Support vehicle milestones including prototype, pre-production, and production build events .
Deliver world-class craftsmanship and fit/finish and launch the product successfully.
Requirements
Bachelor of Science or higher in Mechanical Engineering or equivalent in experience and evidence of exceptional
ability.
Proficiency in CATIA V5 using parametric elements and knowledge based engineering tools.
Understanding of GD&T.
Demonstrated knowledge and ability to integrate state-of-the-art design and manufacturing methods into product
concepts and designs.
Ability to interpret CAE results and integrate recommendations into product designs.
Prior experience with low volume (10-25k units/year) production preferred.
Knowledge of relevant manufacturing processes and lightweight, recyclable and sustainable materials.
Job Description:
Hyundai Technical Center Inc. (HATCI) is currently looking for a Chassis Engineer to join the North America
Quality Center Team at its facility in Chino, CA who will:
Analyze Chassis warranty data to determine emerging trends which require investigation
Conduct local and field investigations as needed to determine root cause with detail description of
duplicating condition
Benchmark competitive vehicles and provide input to competitive database for Chassis attributes
Support port, assembly plant, and dealership visits to investigate issue
Support port and plant visits to assess quality
Prepare weekly report with subjective and objective data
Research new methods and procure new technology relevant to measurement of Chassis systems
and NVH
Support the departmental goals related to Chassis
In this role one should have a hands-on level of familiarity with traditional Chassis systems such as
brakes/suspension/shocks/steering, etc, as well as the function and layout of modern technologies
such as stability control, electric power steering, adjustable damping and other technologies.
Ability to travel on short notice, up to 40%, domestically and on occasion, internationally.
Job Description:
Hyundai Kia America Technical Center, Inc (HATCI) is looking for a Powertrain Engineer for our North
America Quality Center (NAQC) Chino, Ca facility who will:
Develop well integrated powertrain systems in Hyundai/Kia vehicles and to balance all aspects of
powertrain performance to create a distinctive powertrain character that customers strongly desire.
Study warranty analysis of existing models to provide continuous engineering support, identify
problems, conduct root cause analysis, and to provide counter measures or resolution.
Review, verify, and track countermeasure effectiveness.
Identify major quality issues for the powertrain systems and provide Engineering analysis and
research results to provide 'lessons learned.'
Research, procure and maintain new technology, tools, and methods for data acquisition or
analysis.
Knowledge of On Board Diagnostic system is a plus.
Position requires some Hands On experience with modern vehicles.
Create and present technical reports as required.
Travel 40% domestic and international
Experience and Skills:
Job Description:
Hyundai America Technical Center, Inc.(HATCI) is seeking a Powertrain Performance Test Engineer at our
Chino, CA location that will support establishment & validation of Powertrain performance characteristics,
through analysis of current and future Hyundai & Kia vehicles, competitor vehicles, powertrain trends, and
customer preferences and feedback.
Evaluate & test Hyundai/Kia development vehicles: perform root cause analysis of drivability and
performance items. Recommend countermeasures; co-work to validate improvement.
Plan & participate in Evaluation Test Trips to validate drivability and confirm program status and
match to US market expectation.
Conduct competitor vehicle testing for objective measures of performance, fuel economy, and
subjective measures of powertrain performance feel.
Process objective data with Matlab, Excel, and/or other relevant software.
Analyze competitive vehicle tuning and identify key features, including fuzzy logics.
Analyze US market feedback from customers and media, comprehend powertrain tuning issues for
Hyundai/Kia vehicles, and provide recommendations for countermeasures.
Analyze US market driving patterns and support continuous improvement of objective testing and
data processing methods.
Support Powertrain Drive Clinics to determine customer preferences for Hyundai/Kia Powertrain
calibrations in comparison with competitor vehicles.
Support development of concept demonstration vehicles targeting proper performance feel for the
US market.
Support analysis and development of conventional and smart cruise control, and selectable &
adaptive drive modes
Demonstrate recommended tuning direction by supporting development & validation of concept &
production calibrations. Report findings to internal stakeholders and overseas partners.
Support other Management requests as they occur.
Assist in planning and monitoring of project budgets.
Create and present technical reports for all engineering projects & activities.
Perform administrative functions such as budget approval requests, travel requests, etc.
Perform additional projects as assigned.
Travel up to 30% of time domestically and internationally.
The Build Reliability Engineer will ensure the reliability of flight components and assemblies. This individual will evaluate
product and process output data to drive improvements in manufacturing quality, and actively represent quality objectives in
design and development teams.
RESPONSIBILITIES:
BASIC QUALIFICATIONS:
Bachelors degree in electrical, manufacturing, mechanical or material sciences engineering
Minimum 2 years in a quality, manufacturing, or design engineering role
Experience supporting production of complex electro-mechanical, mechanical, or composites systems in high volume work
centers and/or during production ramp-up.
Knowledge of quality tools such as Lean principles, Six Sigma, Root Cause Analysis and Corrective Action, Advanced
Product Quality Planning (APQP), Metrology, Process Failure Mode and Effects Analysis (PFMEA), Control Plans, and
various problem solving approaches.
Dedicated to adopting a Lean approach to quality without compromising safety or reliability.
ADDITIONAL REQUIREMENTS:
Ability to work extended hours, weekends, and offsite as required. Some travel may be required.
Join our Development Test group and support the development of our Dragon spacecraft and Falcon launch vehicles.
Development Test Operations is a fast paced R&D focused group that supports testing of the latest vehicle and spacecraft
designs.
RESPONSIBILITIES:
Create test stand concepts, fabrication drawings, wiring schematics, and instrumentation lists
Design and analyze structures, fluid systems and mechanisms
Supervise the integration of test stands including fabrication, mechanical assembly and data/control systems
Operate test stands with great attention to detail. (tests have very little margin for error, so attention to detail is a crucial and
essential characteristic of a development test engineer.)
BASIC QUALIFICATIONS:
ADDITIONAL REQUIREMENTS:
The Service Engineer will be responsible for all PQ work related to the analysis of all quality concerns
with an specific model platform, including warranty data analysis, countermeasure investigation &
validation and implementation on the field. Review FPQR and complete TREAD coding per government
mandates and other communication actions to the field. Executes product audits through a combination
of in plant audits as well as Port of Entry (POE) audits and report all findings and follow up to closure.
For quality improvement purposes, position requires continuous evaluation of Product Quality Test Fleet
vehicles and will include driving outside of normal business hours. This requires the possession of a valid
state drivers license and good driving record.
MAJOR RESPONSIBILITY
JOB REQUIREMENTS
Education:
Experience with and/or affinity for BT/VR/Multi Media or similar systems preferred
Strong working knowledge of automobile technology, with the ability to perform hands-on
diagnostic, mechanical and electrical work on vehicle systems
Strong analytical approach to problem resolution
Position Requirements:
SKILLS
The Subaru Field Service Engineer will travel to retailers on a regular basis to proactively monitor and investigate the product
quality and effectiveness of product improvements and assist retailers with difficult diagnosis and repairs, provide training
support and assist the retailer in developing the retailer's technical staff.
When not traveling, they will provide technical support via phone to Subaru retailers and DPSMs and review field reports to
identify new opportunities.
The Field Service Engineer will lead root cause field investigations, either independently or with FHI and SOA personnel. They
will be the SOA Tech Group representative for Quick Response Activity (QRA) and other quality investigations in conjunction
with FUSA, SIA and FHI.
They will review repair procedures and advise on Service Equipment needs. They will educate the retailer technicians on proper
diagnostic and repair procedures when investigating, to enable thetechnicians to perform the job on their own in the future. They
will study repurchase and trade assisted vehicles and provide recommendations to reduce similar cases from re-occurrence .
Additionally, they must be comfortable with acting as the spokesperson/witness when needed on contested Lemon Law/warranty
matters.
Education/Experience: BA/BS in Automotive Technology, Mechanical Engineering + 6-8 years of related technical service
experience. ASE certification a plus
Skill Requirements: Knowledge of operation of Subaru specific systems (or demonstrated ability to learn new/proprietary SOA
systems), vehicle characteristics and general automotive repair procedures. Diagnostic and technical skills. Attend and pass all
SOA technical training courses. Attend and pass all 8 ASEs and maintain a Senior Master level Strong Microsoft office skills.
This position requires professional flexibility that will allow the individual to adapt to existing skill sets in an effort to succeed in
a changing business climate. Excellent interpersonal, negotiation and presentation skills are necessary.
Must possess a valid driver's license and maintain a driving record that is acceptable or probationary under the SOA Driving
Record Evaluation Criteria Policy. Must be approved as an "Authorized Driver" by Risk Mgmt. to operate company vehicle prior
to vehicle operation
RESPONSIBILITIES:
BASIC QUALIFICATIONS:
ADDITIONAL REQUIREMENTS:
As a Manufacturing Development Engineer at SpaceX, you will have the opportunity to utilize your knowledge, experience,
and creativity to develop novel solutions at the cutting edge of space technology. Manufacturing Development Engineers are
responsible for the integration of the launch vehicles internal assembly. You will have the opportunity to enable increased
throughput of existing lines and develop manufacturing methods for new products.
RESPONSIBILITIES:
Develop and execute build and test procedures for the integration and test of flight hardware and ground support equipment
Responsible for vehicle integration build flow and test concept of operations
Evaluate proposed designs for manufacturability and integration into the launch vehicle
Interface with engineers and technicians to advance to larger scale manufacturing and automation
Develop and refine manufacturing assembly procedures based on lessons learned to mature status
Responsible for enabling day-to-day execution of the vehicle integration and test flow
Manage work orders and driving non-conformances into actionable items and system improvements
BASIC QUALIFICATIONS:
Experience with build integration and testing of structure, fluid and/or propulsion systems
Experience with hardware test methodologies including pressure proof testing, leak checking and nondestructive evaluation
(NDE)
Experience with project management
Masters of Science in mechanical/chemical/aerospace engineering
Experience writing test plans, procedures and providing go/no-go judgment
Experience in a production environment within the aerospace industry
ADDITIONAL REQUIREMENTS:
This is a hands-on position that may require standing for up to 4 hours a day and working directly with hardware on the floor
Must be comfortable stooping, bending, and standing
Must be willing to work long hours and weekends as necessary
MANUFACTURING ENGINEER MACHINE SHOP
RESPONSIBILITIES:
Resolve, analyze and solve manufacturing discrepancies, while interfacing with the quality team (resolving issues for design,
fabrication, and assembly)
Aggressively drive and implement process improvements to reduce assembly hours and build cost
Fully develop and implement future state production systems for all products
Create capital/facility justifications for large projects and manage through implementation and runoff
BASIC QUALIFICATIONS:
<strong< strong="" style="box-sizing: border-box;">The Vehicle Systems I&TE defines and executes checkouts of
propulsion, avionics, software and structural systems on the Falcon 9 rocket. The Engineer will bring new ideas, initiative,
and ownership to the product and the process to create a mature technology that can be transitioned into long term, stable
production.</strong<>
RESPONSIBILITIES:
INTEGRATION
Hardware
Software
Interface with development engineers to improve and expedite performance acceptance testing
Develop logic for automatic sub-assembly testing and verification of test results
Analyze test data and develop appropriate interpretation strategy for remote acceptance
Test
Run pressurized tests to verify the functionality and integrity of various Stage 1 propulsion and electrical systems at both the
subsystem and vehicle integration level
Write test plans and procedures
Layout and build test stands and racks for automated pressure testing and subsystem checkouts
Review test data and provide go/no-go judgment
Interface with Production engineers and technicians to hand off test responsibilities as technologies
BASIC QUALIFICATIONS:
Must be willing to travel for limited periods of time (on or about 1 week) to test or launch sites to support operations
Must be willing to work weekends as necessary to accommodate test campaigns
Job Description
Motivo is actively seeking a Mechanical Engineer. Motivo is a project-based small business focused on mechanical and electrical
system design and prototype builds with an emphasis on integrated electro-mechanical systems. We develop products in diverse
market segments including mobility/automotive, medical/health, robotics, and clean energy. Motivo specializes in taking
concepts and designs through the conceptual and detailed engineering phases, solving complex engineering challenges along the
way, and transitioning the initial concept/idea to a fully engineered solution.
Applicant should have a strong engineering background with a good understanding of mechanical and electrical fundamentals.
The ideal candidate will be a generalist with a solid understanding of physics and dynamics and should be able to integrate
electric motors and physical sensors into electromechanical systems. This role is responsible for a broad range of mechanical
engineering and multi-disciplinary tasks. Typical assignments will include the execution of design, analysis, and integration at
the system and component level.
Advanced knowledge/skills in CAD modeling using a major software package (e.g., SolidWorks, CATIA V5, ProE, or UG-
NX)
Generate detailed design and technical drawings of systems, components, and interfaces
Exposure to prototype manufacturing techniques. Understanding of casting, forging, and general manufacturing processes
Experience in rapid prototyping of electro-mechanical systems from concepts to functional prototypes is a plus
Required Attributes
BS in engineering required, MS or higher preferred
Minimum 2 years of direct engineering experience within the automotive industry and/or engineering services is preferred
Must be a generalist with involvement in systems level design and experience working in a cross-functional engineering team
Understanding of complex systems modeling and how it can be applied to optimize vehicle systems
Ability to apply GD&T to component designs and assemblies per ASME Y14.5-1994
Ability to multi-task and demonstrate attention to quality, timing, awareness of budget constraints, and other program
management considerations
Salary is negotiable based on experience. Motivo offers health benefits, 401k, flexible hours and paid time off, off-hours shop
access, and a profit sharing plan for employees who meet the necessary eligibility requirements.