Académique Documents
Professionnel Documents
Culture Documents
xls
RNC
V200R009
BSC6810 V200R011C00SPC100
Parameter Reference
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance,
headquarters.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
10/26/2017 12133
369835760.xls
d service. For any assistance, please contact our local office or company
spective holders.
ade in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in th
10/26/2017 22133
369835760.xls
nd recommendations in this document do not constitute the warranty of any kind, express or implied.
10/26/2017 32133
369835760.xls
Purpose
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.
Version
Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Organization
Description
Parameter ID
Parameter Name
MML Command
NE
Meaning
Value Type
GUI Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Service Interrupted After Modification
Interruption Scope
10/26/2017 42133
369835760.xls
Attribute
Introduced in Version
10/26/2017 52133
369835760.xls
Remarks
Simple string for identifying a parameter
Full name of the parameter
Commands for setting the parameter, and optional/mandatory attribute of the
parameter in each command
NEs on which the parameter is set
Functions, functioning ways, and protocols of the parameter
Parameter value type
Parameter value range displayed on the GUI
Actual parameter value range corresponding to the GUI Value Range. For
example, the GUI Value Range is 0, and the corresponding Actual Value
Range is OFF.
Parameter value unit
Initial value provided by the system
Values recommended in different scenarios
Parameter impact scope, that is, objects specified when the parameter is set
Relationship between this parameter and other parameters. For example, to
use this parameter, you need to set related switches and parameters.
Whether modifying the parameter value may interrupt the existing services
Possible interruption scope in the case that modifying the parameter value
may interrupt the existing services
Possible interruption duration in the case that modifying the parameter value
may interrupt the existing services
Cautions to be taken during the modification
Whether this parameter is read/write or read only
10/26/2017 62133
369835760.xls
10/26/2017 72133
Parameter ID Parameter Name MML Command NE
AAL2PATHT AAL2 Path Type ADD AAL2PATH(Mandator RNC
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
ACFC Address and control field c RNC
SET
DSACAUTOALGO(Manda
tory)
ADD
CELLDSACMANUALPA
RA(Mandatory)
SET
ALMLVL(Mandatory)
SET BOXRPT(Mandatory)
SET ALMPORT(Optional)
aid Alarm ID RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
AmntOfRpt3C 3C event retry max times RNC
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
AUTHMODE Validate mode RNC
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
AUTHNAME Validate user name RNC
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
AUTHPWD Validate password RNC
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
AUTHTYPE Validate protocol type RNC
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Mandatory)
BandInd Band indicator RNC
ADD
CELLINTERRATHONCO
V(Optional)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHONCOV(Opti
onal)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
BSICVerify BSIC verify switch RNC
BT Board type SET E1T1LOP(Mandatory) RNC
BT Board type LOP E1T1(Mandatory) RNC
BT Board type STR E1T1TST(Mandatory) RNC
ADD PPPLNK(Optional)
ADD IMAGRP(Optional)
ADD FRALNK(Optional)
ADD UNILNK(Optional)
ADD MPGRP(Optional)
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Optiona
l)
CARRYFRAATMLNKN Bearing FRAATM link No. RNC
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Optiona
l)
CARRYIMAGRPN Bearing IMA group No. RNC
ADD NCP(Mandatory)
ADD CCP(Mandatory)
CARRYLNKT Bearing link type RNC
ADD
IPOAPVC(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
CARRYNCOPTN Bearing NCOPT port No. RNC
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Optiona
l)
CARRYUNILNKN Bearing UNI link No. RNC
ADD
SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
CARRYVCI Bearing VCI RNC
ADD
SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
CARRYVPI Bearing VPI RNC
ADD
IPOAPVC(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
CARRYVPN Bearing ATMLGCPORT por RNC
CBCIPADDR CBS CBC IP address ADD CBSADDR(MandatoryRNC
CBCMASK Subnet mask ADD CBSADDR(MandatoryRNC
CBS Consent burst size ADD IPLOGICPORT(OptionRNC
CBSOpIndex CBS Operator Index ADD QUICKCELLSETUP(M RNC
ADD
CELLCBSSAC(Mandatory
)
ADD
QUICKCELLSETUP(Man
CBSSAC CBS SAC datory) RNC
CBSwitch CB Switch SET RNCCBPARA(Optiona RNC
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
NRNCCELL(Mandatory)
ADD
GSMCELL(Mandatory)
CfgRacInd RAC Configuration Indicati RNC
CfgSwitch Channel configuration strat SET CORRMALGOSWITCH(
RNC
ADD
IPPATHBIND(Mandatory)
STR IPCHK(Optional)
CHKN Check Index RNC
CHKSUMRX Calculate checksum when r ADD SCTPLNK(Optional) RNC
CHKSUMTX Calculate checksum when s ADD SCTPLNK(Optional) RNC
CHKSUMTYPE Checksum arithmetic ADD SCTPLNK(Optional) RNC
CHKTYPE Check type STR IPCHK(Mandatory) RNC
SET LDM(Optional)
SET SATLDM(Optional)
ChoiceRprtUnitForDlBasic Time unit for DL basic meas RNC
SET LDM(Optional)
SET SATLDM(Optional)
ChoiceRprtUnitForDlOlcMe Time unit for DL OLC meas RNC
SET LDM(Optional)
SET SATLDM(Optional)
ChoiceRprtUnitForHsdpaP Time unit of HSDPA need p RNC
SET LDM(Optional)
SET SATLDM(Optional)
ChoiceRprtUnitForHsdpaRa Time unit of HSDPA bit rate RNC
SET LDM(Optional)
SET SATLDM(Optional)
SET LDM(Optional)
SET SATLDM(Optional)
ChoiceRprtUnitForUlOlcMe Time unit for UL OLC meas RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ChoiceRptUnitForAmrE AMR Reporting Period Unit RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ChoiceRptUnitForBeE BE Reporting Period Unit F RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ChoiceRptUnitForBeF BE Reporting Period Unit F RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ChoiceRptUnitForVpE VP Reporting Period Unit F RNC
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
ADD
CELLCMCF(Optional)
SET CMCF(Optional)
ADD
NRNCCELL(Mandatory)
ADD
GSMCELL(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
CELLSETUP(Mandatory)
CnOpGrpIndex CN Operator Group Index RNC
CnOpGrpName Cn Operator Group Name ADD CNOPERGROUP(Mand RNC
CnOpIndex Cn Operator Index ADD NRNCURA(Mandator RNC
)
ADD
ATMLOGICPORT(Optiona
l)
ADD CZ(Mandatory)
RST IU(Mandatory)
RST
IURESOURCE(Mandatory
)
ADD
CELLCBSSAC(Mandatory
)
SET
IUTIMERANDNUM(Man
datory)
ADD
CNNODE(Mandatory)
ADD
NRIGLBCNIDMAP(Mand
atory)
ADD
IMSIIDNNSCNIDMAP(M
andatory)
ADD
RNCCBCPUID(Mandatory
)
SET
OPERATORCFGPARA(M
andatory)
ADD
MBMSSA(Mandatory)
ADD
CELLMBMSSA(Mandator
y)
ADD LAC(Mandatory)
ADD RAC(Mandatory)
CnOpIndex Cn Operator Index ADD SAC(Mandatory) RNC
CnOpIndex1 Operator 1 Index ADD CNOPERGROUP(Mand
ADD NODEB(Mandatory) RNC
CnOpIndex2 Operator 2 Index ADD CNOPERGROUP(MandRNC
CnOpIndex3 Operator 3 Index ADD CNOPERGROUP(MandRNC
CnOpIndex4 Operator 4 Index ADD CNOPERGROUP(MandRNC
CnOpIndexComm Common Operator Index ADD CNOPERGROUP(OptiRNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET DRD(Optional)
ADD
CELLDRD(Optional)
CodeBalancingDrdSwitch Code balance drd switch RNC
ADD
INTERFREQNCELL(Opti
onal)
ADD
INTRAFREQNCELL(Opti
onal)
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
CSHOOut2GloadThd CS domain Reloc GSM loa RNC
CsInfoUpdFlag CS Information Update Swi SET OPERATORCFGPARA(O
RNC
ADD
SCCPCHBASIC(Optional)
ADD
PRACHBASIC(Optional)
CTFCSize CTFC length of TFCS RNC
ADD
CELLSELRESEL(Mandato
ry)
ADD
NRNCCELL(Mandatory)
DeltaQrxlevmin Delta Min Rx level RNC
ADD M3DE(Mandatory)
ADD M3RT(Mandatory)
ADD M3LKS(Mandatory)
DENO Destination entity No. RNC
DESTIP Destination IP address PING IP(Mandatory) RNC
DESTIP Destination IP address TRC IPADDR(Mandatory) RNC
DESTMEPID RMEP ID PING MAC(Mandatory) RNC
DESTMEPID RMEP ID TRC MAC(Mandatory) RNC
DGPSPERIOD DGPS data report period ADD GPS(Optional) RNC
SET LDM(Optional)
SET SATLDM(Optional)
DlBasicCommMeasFilterCo DL basic common measure fi RNC
SET
FRCCHLTYPEPARA(Opti
onal)
ADD CELLFRC(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
DlCSInterRatShouldNotH DL CS should not be HO us RNC
ADD
CELLDCCC(Optional)
SET DCCC(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
DlLdrSecondAction DL LDR second action RNC
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
DlLdrThirdAction DL LDR third action RNC
SET AMRC(Optional)
SET AMRCWB(Optional)
SET LDM(Optional)
SET SATLDM(Optional)
DlOlcMeasFilterCoeff DL overload measure filter c RNC
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
ADD
CELLCMCF(Optional)
SET CMCF(Optional)
SET AMRC(Optional)
SET AMRCWB(Optional)
SET AMRC(Optional)
SET AMRCWB(Optional)
SET AMRC(Optional)
SET AMRCWB(Optional)
ADD N7DPC(Mandatory)
ADD M3DE(Mandatory)
ADD
MTP3LKS(Mandatory)
ADD
ADJNODE(Mandatory)
ADD
CNNODE(Mandatory)
ADD NRNC(Mandatory)
ADD
MTP3RT(Mandatory)
DPX DSP index RNC
ADD
GSMNCELL(Optional)
ADD
INTERFREQNCELL(Opti
onal)
DRDEcN0Threshhold Drd Ec/N0 threshold RNC
DrlAal2EstIndTmr DRL AAL2 establishment indSET STATETIMER(Optiona RNC
DrlRecfgCmitTmr DRL reconfiguration commit SET STATETIMER(Optiona RNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
DRMaxGSMNum Max inter-RAT direct retry RNC
ADD
PPPLNK(Mandatory)
ADD MPLNK(Mandatory)
DS1 E1T1 port No. RNC
DsacAutoSwitch Switch for auto DSAC SET DSACAUTOALGO(OptRNC
PING IP(Optional)
SET
DSCPMAP(Mandatory)
ADD SCTPLNK(Optional)
SET
PHBMAP(Mandatory)
DSCP Differentiated services code RNC
DSPNO Dsp No. STR IPLOPTST(Mandatory RNC
DST DaylightSave SET TZ(Optional) RNC
ADD IPRT(Mandatory)
ADD
IPRTBIND(Mandatory)
ADD FLOW(Mandatory)
DSTIP Destination IP address RNC
DSTMASK Destination address mask ADD IPRT(Mandatory) RNC
DSTMASK Destination address mask ADD IPRTBIND(Mandatory RNC
SET FRC(Optional)
ADD CELLFRC(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
SET OPT(Mandatory)
SET
ETHPORT(Mandatory)
ADD MPGRP(Optional)
ADD PPPLNK(Optional)
ADD UNILNK(Optional)
ADD
ATMLOGICPORT(Optiona
l)
ADD
PORTFLOWCTRLPARA(
Mandatory)
ADD
IPLOGICPORT(Optional)
EXP CFGMML(Optional)
BKP DB(Optional)
FILENAME Export file name RNC
FILEPATH Export file path EXP CFGMML(Optional) RNC
FilterCoef Intra-freq meas L3 filter coe SET INTRAFREQHO(OptioRNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD FRALNK(Optional)
SET OPT(Optional)
ADD PPPLNK(Optional)
ADD IMAGRP(Optional)
ADD
IPLOGICPORT(Optional)
ADD MPGRP(Optional)
ADD UNILNK(Optional)
ADD
ATMLOGICPORT(Optiona
l)
SET ETHPORT(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
ADD
IPLOGICPORT(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
ADD
IPLOGICPORT(Optional)
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
ADD CELLHCS(Optional)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Optional)
HCSPrio HCS priority level RNC
HDBKGDL HSDPA background service ADD TRMFACTOR(OptionaRNC
HDHIGHINTERACTSEC HSDPA high pri sec path loa ADD LOADEQ(Optional) RNC
HDINTERDL HSDPA interactive service d ADD TRMFACTOR(OptionaRNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
Hystfor2C 2C hysteresis RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
HystForPrdInterFreq HHO hysteresis RNC
ADD
INTERFREQNCELL(Opti
onal)
ADD
INTRAFREQNCELL(Opti
onal)
ADD
IMAGRP(Mandatory)
ADD
FRALNK(Mandatory)
ADD
IMALNK(Mandatory)
IMAGRPN IMA group No. RNC
IMAID IMA ID ADD IMAGRP(Optional) RNC
ADD
IMALNK(Mandatory)
STR IMATST(Mandatory)
IMALNKN IMA link No. RNC
IMAVER IMA protocol version ADD IMAGRP(Optional) RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
InterFreqMeasTime Inter-freq measure timer len RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
InterRATCSThd2FRSCP Inter-RAT CS measure sto RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
InterRATHThd2FRSCP Inter-RAT H measure stop RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
ADD
CELLMBDRINTERRAT(
Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
InterRATPingPongHyst Inter-RAT PingPong Hyst RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
InterRATPingPongTimer Inter-RAT PingPong timer RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
InterRATR99PsThd2FRSCP Inter-RAT R99 PS measure RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD ETHIP(Mandatory)
ADD DEVIP(Mandatory)
ADD
IPOAPVC(Mandatory)
ACT VCLCC(Mandatory)
ADD
ETHTRKIP(Mandatory)
IPADDR Local IP address RNC
IPADDR Next Hop IP Address ADD VLANID(Mandatory) RNC
IPADDR Local IP address ADD IPPATH(Mandatory) RNC
ADD ETHIP(Mandatory)
ADD
ETHTRKIP(Mandatory)
IPTYPE IP address type RNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET DRD(Optional)
ADD
CELLDRD(Optional)
LdbDRDSwitchDCH Load balance DRD switch RNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
LdbDRDSwitchHSDPA Load balance DRD switch RNC
LdbDRDTotalPwrProThd Load balance DRD total powSET DRD(Optional) RNC
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
ADD MTP3LKS(Optional)
ADD M3LKS(Optional)
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
LNKT Link type RNC
ADD ETHMA(Mandatory)
ADD
ETHMEP(Mandatory)
ACT ETHCC(Mandatory)
PING MAC(Mandatory)
TRC MAC(Mandatory)
MAIDX MA Index RNC
ADD NCP(Optional)
MAINLINK Main link type ADD CCP(Optional) RNC
MANAME MA Name ADD ETHMA(Mandatory) RNC
MapSwitch Service mapping strategy sw SET CORRMALGOSWITCH(
RNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD
INTERFREQNCELL(Opti
onal)
ADD
GSMNCELL(Optional)
MBDRPrio The priority of MBDR neigh RNC
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
ADD
CNOPERATOR(Mandatory
)
ADD
LASNAMAP(Mandatory)
ADD
IMSISNAMAP(Mandatory
)
ADD
GSMCELL(Mandatory)
SET
MBMSPERF(Mandatory)
MCC Mobile country code RNC
ADD ETHMD(Mandatory)
ADD ETHMA(Mandatory)
MDIDX MD Index RNC
MDNAME MD Name ADD ETHMD(Mandatory) RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
SET LDM(Mandatory)
SET SATLDM(Mandatory)
SET LDM(Mandatory)
SET SATLDM(Mandatory)
MinForDlOlcMeas DL OLC meas rprt cycle RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
MinForHsdpaPrvidRateMea HSDPA bit rate meas cycle RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
MinForHsdpaPwrMeas HSDPA need pwr meas cycl RNC
MinForHsupaPrvidRateMea HSUPA bit rate meas cycle SET LDM(Mandatory) RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
SET LDM(Mandatory)
SET SATLDM(Mandatory)
MinForUlOlcMeas UL OLC meas rprt cycle RNC
ADD
CELLQUALITYMEAS(M
andatory)
SET
QUALITYMEAS(Mandato
MinForVpE VP Event E Reporting Perio ry) RNC
ADD MPGRP(Mandatory)
ADD MPLNK(Mandatory)
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional)
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional)
SET ETHPORT(Optional)
ADD SCTPLNK(Optional)
MTU MTU RNC
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
MUXTIME PPP mux frame group out-t RNC
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
ADD IPRT(Mandatory)
ADD
IPRTBIND(Mandatory)
NEXTHOP Forward route address RNC
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
NFastSpdEst Threshold for UE fast speed RNC
ADD NODEB(Mandatory)
ADD
ADJNODE(Mandatory)
SET
MRSCOPECTRL(Mandato
ry)
ADD
NODEBIP(Mandatory)
ADD
NODEBESN(Mandatory)
STR
NODEBDETECT(Mandato
ry)
NodeBId NodeB ID RNC
NODEBIMAGRPN NodeB IMA group No. STR NODEBBWRPT(MandaRNC
ADD
INTERFREQNCELL(Man
datory)
ADD
GSMNCELL(Mandatory)
NPrio The priority of neighbor cell RNC
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
ADD
AAL2RT(Mandatory)
ADD NODEB(Mandatory)
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
NSlowSpdEst Threshold for UE slow spee RNC
SET
DSACAUTOALGO(Manda
tory)
ADD
CELLDSACMANUALPA
RA(Mandatory)
ADD
AAL2PATH(Mandatory)
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
PATHID AAL2 Path ID RNC
ADD IPPATH(Mandatory)
ACT IPPM(Mandatory)
ADD
IPPATHBIND(Mandatory)
PATHID IP Path ID RNC
ADD PCPICH(Optional)
ADD
QUICKCELLSETUP(Opti
onal)
ADD
IPOAPVC(Mandatory)
LOP VCL(Mandatory)
ACT VCLCC(Mandatory)
PEERIPADDR Peer IP address RNC
ADD
CELLINTERRATHOCOV(
Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHOCOV(Optio
nal)
SET
INTERRATHONCOV(Opti
onal)
PenaltyTimeForPhyChFail Inter-Rat HO physical channe RNC
PenaltyTimer Inter-RAT Penalty timer len ADD CELLMBDRINTERRAT
RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
PeriodFor2B 2B event retry period RNC
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
PeriodFor2C 2C event retry period RNC
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
PeriodFor3A 3A event retry period RNC
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
PeriodFor3C 3C event retry period RNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
PeriodMRReportNumfor1A 1A event to periodical rpt INTRAFREQHO(Optional) RNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
PeriodMRReportNumfor1C 1C event to periodical rpt INTRAFREQHO(Optional) RNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
PeriodMRReportNumfor1J 1J event to periodical rpt n INTRAFREQHO(Optional) RNC
SET LDM(Optional)
SET SATLDM(Optional)
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
PFC Protocol field compress RNC
ADD LAC(Mandatory)
ADD RAC(Mandatory)
PlmnValTagMax Max PLMN value tag RNC
ADD LAC(Mandatory)
ADD RAC(Mandatory)
PlmnValTagMin Min PLMN value tag RNC
PLPRD Packet lost measure period ADD IPLOGICPORT(OptionRNC
SET ETHPORT(Optional)
SET
MSPCMD(Mandatory)
CLR MSPREP(Optional)
SET OPTLOP(Mandatory)
SWP
ETHPORT(Mandatory)
SET MSP(Mandatory)
ACT MSP(Optional)
SET OPT(Optional)
SET
COPTLNK(Mandatory)
ACT
ETHPORT(Mandatory)
ADD
ETHREDPORT(Mandatory
)
ADD ETHIP(Mandatory)
ADD
IPLOGICPORT(Mandatory
)
ADD CCP(Mandatory)
ADD PPPLNK(Optional)
ADD MPLNK(Mandatory)
PPPLNKN PPP link No. RNC
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
PPPMUX PPP mux RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
PrdReportInterval Inter-frequency measure peri RNC
ADD
MTP3LNK(Optional)
ADD M3LNK(Optional)
PRIORITY Signalling link priority RNC
ADD MTP3RT(Optional)
ADD M3RT(Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opti
onal)
PSHOOut2GloadThd PS domain Reloc GSM loa RNC
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
ADD CELLHCS(Optional)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Optional)
Qhcs Quality threshold for HCS r RNC
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Mandatory)
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Mandatory)
ADD
TYPRABOLPC(Mandatory
)
ADD
TYPRABDCCCMC(Mand
atory)
ADD
TYPRABRLC(Mandatory)
ADD
TYPRABHSPA(Mandatory
)
ADD
TYPRABBASIC(Mandator
y)
ADD
TYPRABQUALITYMEAS
(Mandatory)
RabIndex Service parameter index RNC
ADD RAC(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
GSMCELL(Mandatory)
ADD
NRNCCELL(Mandatory)
RAC Routing area code RNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
ADD IPRT(Optional)
ADD ATMTRF(Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
RESTARTTMR son-protocol confer out time RNC
RestrictionType Restriction Type ADD CELLDSACMANUALP
RNC
ADD
CELLINTRAFREQHO(Ma
ndatory)
ADD
INTRAFREQNCELL(Man
datory)
ADD
INTERFREQNCELL(Man
datory)
ADD
GSMNCELL(Mandatory)
ADD
SMLCCELL(Mandatory)
RST IUR(Mandatory)
ADD
RNCBASIC(Mandatory)
ADD GPS(Mandatory)
RST RNC(Mandatory)
RNCId RNC ID RNC
RNCIPADDR CBS RNC IP address ADD CBSADDR(MandatoryRNC
RncPoolIndex RncPool Index ADD RNCPOOLMEMBER(Mandatory)
RNC
RncPoolName RncPool Name ADD RNCPOOL(MandatoryRNC
RncProtclVer RNC protocol version ADD NRNC(Mandatory) RNC
RPTTHD Decrease rate alarm report t ADD IPLOGICPORT(OptionRNC
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RsvdPara1 Reserved parameter 1 RNC
RsvdPara1 Reserved Parameter1 SET DPUCFGDATA(Option RNC
RSVDPARA10 Reserved Parameter 10 SET DEVPATCHPARA(OptiRNC
RsvdPara10 Reserved Parameter10 SET DPUCFGDATA(Option RNC
RsvdPara11 Reserved Parameter11 SET DPUCFGDATA(Option RNC
RsvdPara12 Reserved Parameter12 SET DPUCFGDATA(Option RNC
RsvdPara13 Reserved Parameter13 SET DPUCFGDATA(Option RNC
RsvdPara14 Reserved Parameter14 SET DPUCFGDATA(Option RNC
RsvdPara15 Reserved Parameter15 SET DPUCFGDATA(Option RNC
RsvdPara16 Reserved Parameter16 SET DPUCFGDATA(Option RNC
RsvdPara2 Reserved parameter 2 ADD NRNC(Optional) RNC
RsvdPara2 Reserved parameter 2 ADD CNNODE(Optional) RNC
RSVDPARA2 Reserved Parameter 2 SET DEVPATCHPARA(OptiRNC
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RsvdPara2 Reserved parameter 2 RNC
RsvdPara2 Reserved Parameter2 SET DPUCFGDATA(Option RNC
RSVDPARA3 Reserved Parameter 3 SET DEVPATCHPARA(OptiRNC
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RsvdPara3 Reserved parameter 3 RNC
RsvdPara3 Reserved Parameter3 SET DPUCFGDATA(Option RNC
RSVDPARA4 Reserved Parameter 4 SET DEVPATCHPARA(OptiRNC
RsvdPara4 Reserved Parameter4 SET DPUCFGDATA(Option RNC
RSVDPARA5 Reserved Parameter 5 SET DEVPATCHPARA(OptiRNC
RsvdPara5 Reserved Parameter5 SET DPUCFGDATA(Option RNC
RSVDPARA6 Reserved Parameter 6 SET DEVPATCHPARA(OptiRNC
RsvdPara6 Reserved Parameter6 SET DPUCFGDATA(Option RNC
RSVDPARA7 Reserved Parameter 7 SET DEVPATCHPARA(OptiRNC
RsvdPara7 Reserved Parameter7 SET DPUCFGDATA(Option RNC
RSVDPARA8 Reserved Parameter 8 SET DEVPATCHPARA(OptiRNC
RsvdPara8 Reserved Parameter8 SET DPUCFGDATA(Option RNC
RSVDPARA9 Reserved Parameter 9 SET DEVPATCHPARA(OptiRNC
RsvdPara9 Reserved Parameter9 SET DPUCFGDATA(Option RNC
RT Revertive type SET MSP(Optional) RNC
ADD M3LE(Optional)
RTCONTEXT Routing Context ADD M3DE(Optional) RNC
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
ADD
SCTPLNK(Mandatory)
ADD M3LNK(Mandatory)
ADD CCP(Mandatory)
ADD NCP(Mandatory)
SCTPLNKN SCTP link No. RNC
SET DRD(Optional)
ADD
CELLDRD(Optional)
ServiceDiffDrdSwitch Service differential drd swit RNC
ServiceId Service ID SET MBMSPERF(Mandator RNC
ServiceInd CN domain indication ADD NRNC(Mandatory) RNC
ADD
CELLMBMSSCCPCH(Ma
ndatory)
SET
MBMSSCCPCH(Mandator
y)
ADD
CELLMBMSFACH(Manda
tory)
SET
MBMSFACH(Mandatory)
SET MTCH(Mandatory)
ServiceType Service Type RNC
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
SET SMLC(Mandatory)
ADD
MTP3LKS(Mandatory)
ADD
MTP3LNK(Mandatory)
ADD
MTP3RT(Mandatory)
ADD M3RT(Mandatory)
ADD M3LKS(Mandatory)
ADD M3LNK(Mandatory)
SIGLKSX Signalling linkset index RNC
SIGLNKID Signalling link ID ADD M3LNK(Mandatory) RNC
SigRbInd Bearing signal indication ADD FACH(Optional) RNC
SIGSLC Signalling link code ADD MTP3LNK(MandatoryRNC
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
ADD
CBSADDR(Mandatory)
SET
NCELLDETECTSWITCH(
Mandatory)
ADD
IURCOMMSCCP(Mandato
ry)
ADD NODEB(Mandatory)
SN Slot No. RNC
SN Slot No. SET MRSCOPECTRL(MandRNC
SN Slot No. ACT CRC(Optional) RNC
SN Slot No. ADD RNCCBCPUID(MandaRNC
SN Slot No. SWP BRD(Mandatory) RNC
PING MAC(Mandatory)
TRC MAC(Mandatory)
SRCMEPID MEP ID RNC
ADD
CBSADDR(Mandatory)
SET
NCELLDETECTSWITCH(
Mandatory)
ADD
IURCOMMSCCP(Mandato
ry)
ADD NODEB(Mandatory)
SRN Subrack No. RNC
FMT DATA(Optional)
SET OFFLINE(Optional)
SET ONLINE(Optional)
ACT CRC(Optional)
SET
MRSCOPECTRL(Mandato
SRN Subrack No. ry) RNC
SRN Subrack No. ADD SUBRACK(MandatoryRNC
IMALNK(Mandatory)
INH BRD(Mandatory)
UIN BRD(Mandatory)
ADD DEVIP(Mandatory)
ADD IPRT(Mandatory)
SET OPT(Mandatory)
SET
COPTLNK(Mandatory)
ACT
ETHPORT(Mandatory)
SET
ETHPORT(Mandatory)
ADD
ETHREDPORT(Mandatory
)
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
ADD MPLNK(Mandatory)
ADD ETHIP(Mandatory)
ADD
VLANID(Mandatory)
SET
SCUPORT(Mandatory)
STR
IPLOPTST(Mandatory)
ACT FAN(Mandatory)
ADD
IPPATHBIND(Mandatory)
ADD
IPRTBIND(Mandatory)
ACT
ETHOAMAH(Mandatory)
ADD ETHMD(Mandatory)
ADD ETHMA(Mandatory)
ADD
SRN Subrack No. ETHMEP(Mandatory) RNC
ADD
TYPRABOLPC(Mandatory
)
ADD
TYPRABRLC(Mandatory)
SubflowIndex Service subflow index RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
FACHDYNTFS(Optional)
ADD
PCHDYNTFS(Optional)
ADD
RACHDYNTFS(Optional)
TbNumber1 TB number of TF1 RNC
ADD
FACHDYNTFS(Optional)
ADD
PCHDYNTFS(Optional)
ADD
TbNumber2 TB number of TF2 RACHDYNTFS(Optional) RNC
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
TCycleSlow Period of UE slow speed dec RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
TenMsecForDlOlcMeas DL OLC meas rprt cycle RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
TenMsecForHsdpaPrvidRat HSDPA bit rate meas cycle RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
TenMsecForHsdpaPwrMeas HSDPA need pwr meas cycl RNC
SET LDM(Mandatory)
SET SATLDM(Mandatory)
TenMsecForUlOlcMeas UL OLC meas rprt cycle RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
TenMsecForVpE VP Event E Reporting Perio ) RNC
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
TFastSpdEst Time window for UE fast sp RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
TimeToInterfreqHO Inter-freq coverage handover RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
TimeToTrigForNonVerify Time to trigger for non-veri RNC
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
SET
SCHEDULEPRIOMAP(M
andatory)
SET
USERGBR(Mandatory)
SET
FACHBANDWIDTH(Man
datory)
SET
USERHAPPYBR(Mandato
ry)
SET
DTXDRXPARA(Mandator
y)
SET
HSSCCHLESSOPPARA(
Mandatory)
TrafficClass Traffic Class RNC
SET
REDIRECTION(Mandator
y)
ADD
CELLREDIRECTION(Ma
TrafficType Traffic Type ndatory) RNC
ADD
TRMMAP(Mandatory)
ADD
ADJMAP(Mandatory)
ADD
ADJNODE(Mandatory)
ADD FACH(Mandatory)
ADD
FACHLOCH(Mandatory)
ADD RACH(Optional)
ADD
PCHDYNTFS(Optional)
ADD
FACHDYNTFS(Mandatory
)
ADD PCH(Optional)
ADD
RACHDYNTFS(Optional)
TrChId FACH ID RNC
ADD BCH(Optional)
TrChId FACH ID RNC
TrchType Transport channel type ADD TYPRABHSPA(MandaRNC
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
PPPLNK(Mandatory)
ADD
FRALNK(Mandatory)
ADD MPLNK(Mandatory)
TSBITMAP Bearing time slot RNC
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
TSlowSpdEst Time window for UE slow s RNC
ADD IPOAPVC(Optional)
ADD
AAL2PATH(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
VPCLCX(Mandatory)
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
UARFCNUplinkInd UL frequency ind RNC
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
SET LDM(Optional)
SET SATLDM(Optional)
SET
FRCCHLTYPEPARA(Opti
onal)
ADD CELLFRC(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
UlCSInterRatShouldBeHO UL CS should be HO user RNC
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
UlCSInterRatShouldNotH UL CS should not be HO us RNC
ADD
CELLDCCC(Optional)
SET DCCC(Optional)
UlFullCvrRate Uplink Full Coverage Bit Ra RNC
UlGBR Uplink GBR for BE service SET USERGBR(Optional) RNC
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
UlLdrSecondAction UL LDR second action RNC
SET AMRC(Optional)
SET AMRCWB(Optional)
UlModeChangeTimerLen UL Mode Change Timer Len RNC
SET LDM(Optional)
SET SATLDM(Optional)
UlOlcMeasFilterCoeff UL overload measure filter c RNC
UlOlcRelThd UL OLC release threshold ADD CELLLDM(Optional) RNC
ADD
CELLLDR(Optional)
ADD
NODEBLDR(Optional)
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD SCTPLNK(Optional)
ADD IPPATH(Optional)
VLANFlAG VLANID Flag RNC
ADD
VLANID(Mandatory)
ADD IPPATH(Mandatory)
ADD
SCTPLNK(Mandatory)
ADD ETHMA(Mandatory)
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV(
Optional)
SET
INTERRATHOCOV(Optio
nal)
This parameter specifies the time to execute re-host policy for the primary
hosted NodeB, after the RNC recovers from disaster and starts to operate. Compound Type
It defines the mapping of AC 0~9 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 10 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 11 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 12 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 13 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 14 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
It defines the mapping of AC 15 to ASCs. For detailed information of this
parameter, refer to 3GPP TS 22.011. Interval Type
Identifying an ASC. Enumeration Type
This parameter specifies whether to enable the address and control fields
compression switch. Enumeration Type
Specifies the access classes that are restricted according to the fixed
restriction mode. Bit Field Type
Specifies the interval delay between consecutive pollings according to the
flexible polling restriction mode. Interval Type
Difference between the transmit power of AICH and that of PCPICH. If the
value is set too small, the UEs on the cell edge cannot receive the
acquisition indication properly. This problem affects the coverage of the
downlink common channel and furthermore the coverage of the cell. If the
value is set too great, it causes interference to other channels, occupies the
downlink transmit power, and affects the cell capacity. For details, refer to
the 3GPP TS 25.433 protocol. Interval Type
Transmission timing information of an AICH. "0" indicates that there are
7680 chips offset between the access preamble of the PRACH and AICH.
"1" indicates that there are 12800 chips offset between them. For detailed
information of this parameter, refer to 3GPP TS 25.211. Interval Type
This parameter specifies the antenna altitude of the GPS reference receiver. Interval Type
This parameter specifies the antenna altitude of the GPS reference receiver.
(IMP unit: Feet) Interval Type
This parameter specifies the alarm severity to be set. Enumeration Type
When the parameter is set to YES, the QOS control algorithm is used for
AMR services. When the parameter is set to NO, the QOS control
algorithm is not used for AMR services.The QOS actions of AMR services
include rate downsizing, inter frequency handover and inter rat handover. Enumeration Type
AMR CDR(Call Drop Ratio) Per Spu, if the ratio is higher than this
threshold in a checking period, need arise KPI alarm. Interval Type
The minimum number of AMR service attempt Per Spu, the sum of AMR
service attempt need to be higher than this threshold to arise KPI alarm
which type is AMR service successful setup ratio. Interval Type
Successful AMR service setup ratio Per Spu, if the ratio is lower than this
threshold in a checking period, need arise KPI alarm. Interval Type
The Minimum number of AMR release Per Spu, the sum of AMR release
need to be higher than this threshold to trigger arise KPI alarm which type
is AMR call drop ratio. Interval Type
This parameter specifies the latitude of the cell antenna in the WGS-84
coordinates. The input format is ddd:mm:ss.ssss.
This is controlled by GCDF and valid when SEC~1(degree, minute, second
format).The value of this parameter has effect on the location result.
String Type
Longitude of the cell antenna in the WGS-84 coordinates. The value
corresponding to the longitude A degrees B minutes C seconds is [A +
(B/60) + (C/3600)] / 0.000001.
For example, the value corresponding to the longitude 121 degrees 40
minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 =
121676666. This is controlled by GCDF and valid when DEG~0(degree
format).The value of this parameter has effect on the location result. Interval Type
Longitude of the cell antenna in the WGS-84 coordinates. The input format
is ddd:mm:ss.ssss. This is controlled by GCDF and valid when
SEC~1(degree, minute, second format).The value of this parameter has
effect on the location result. String Type
Coverage angle of a sector. For an omni-directional cell, the value is
360.The value of this parameter has effect on the location result. Interval Type
Azimuth of the main lobe of the cell antenna (the counter-clockwise angle
from the direction of the main lobe to the north).The value of this parameter
has effect on the location result. Interval Type
Access point(AP) cell indicator. When the indicator is TRUE, it indicates
that the cell is AP cell. Enumeration Type
Upper-layer application type of the SCTP link.At Iu-b Interface the Upper-
Layer application type is NBAP,at Iu-r, Iu-PS and Iu-CS Interface the
Upper-Layer application type is M3UA. Enumeration Type
This parameter specifies the direction where the current typical RAB
parameters are applied. Enumeration Type
Area flag. Enumeration Type
This parameter specifies the flag of the active and standby areas. Enumeration Type
User_priority corresponding to Allocation/Retention priority 10. Enumeration Type
User_priority corresponding to Allocation/Retention priority 11. Enumeration Type
User_priority corresponding to Allocation/Retention priority 12. Enumeration Type
User_priority corresponding to Allocation/Retention priority 13. Enumeration Type
User_priority corresponding to Allocation/Retention priority 14. Enumeration Type
User_priority corresponding to Allocation/Retention priority 1. Enumeration Type
User_priority corresponding to Allocation/Retention priority 2. Enumeration Type
User_priority corresponding to Allocation/Retention priority 3. Enumeration Type
User_priority corresponding to Allocation/Retention priority 4. Enumeration Type
User_priority corresponding to Allocation/Retention priority 5. Enumeration Type
User_priority corresponding to Allocation/Retention priority 6. Enumeration Type
User_priority corresponding to Allocation/Retention priority 7. Enumeration Type
User_priority corresponding to Allocation/Retention priority 8.
Enumeration Type
User_priority corresponding to Allocation/Retention priority 9. Enumeration Type
This parameter specifies the number of times the ARP resends after the
specified time exceeds. Assume that "ARP packet resend times" is set to N.
If the number of times no response is received after the ARP is resent for N
times, the L3 DETECT FAIL alarm is reported. In the case of a key detect,
the switchover of ports may be triggered. Interval Type
This parameter specifies the time-out value for the ARP packets. Interval Type
This parameter specifies the number of an ATM logical port. Interval Type
This parameter specifies the number of the slot bearing NodeB ATM
transport. Interval Type
This parameter specifies the number of the subrack bearing NodeB ATM
transport. Interval Type
This parameter specifies the password for PPP or MLPPP link negotiation. String Type
This parameter specified the output switch of 8 kHz output clock 1. Enumeration Type
This parameter specified the output switch of 8 kHz output clock 2. Enumeration Type
If [Auto-Adaptive Background Noise Update Switch] is set to OFF, it is
used to set background noise of the cell. If [Auto-Adaptive Background
Noise Update Switch] is set to ON, new background noise is restricted by
this parameter and [PARA]BgnAbnormalThd[/PARA]. For detailed
information of this parameter, refer to the 3GPP TS 25.133. Interval Type
This parameter specifies the full path for saving the backup file. If the
specified path is not a full path, then it will be treated as the relative path
under "installation path in the BAM active workspace\BACKUP\". String Type
This parameter specifies the IP address of the standby port. IP Address Type
This parameter specifies the mask of the standby port. IP Address Type
This parameter specifies the virtual IP address for the BAM external
network. IP Address Type
This parameter specifies the subnet mask of the BAM external network. IP Address Type
Indicating the selected frequency Band in the cell setup process. For
detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type
This parameter specifies the maximum available bandwidth for each traffic
class in the Cell_FACH state with the downlink HSDSCH in use. If the
actual data flow exceeds the maximum bandwidth, the traffic is buffered so
that the buffer occupancy is increased. As a result, the state transition from
Cell-FACH to DCH occurs. This parameter should be set according to the
traffic class. Interval Type
Uniquely identifying a neighboring base station with the same carrier. Interval Type
Offset of the BCH transmit power from the PCPICH transmit power in a
cell. If the value is set too small, the UEs on the cell edge cannot receive
the system messages properly. This problem affects the coverage of the
downlink common channel and furthermore the coverage of the cell. If the
value is set too great, it causes interference to other channels, occupies the
downlink transmit power, and affects the cell capacity. For detailed
information of this parameter, refer to 3GPP TS 25.433 and TS 25.331. Interval Type
This parameter specifies the bearer type of the service.
- R99: The service is carried on a non-HSPA channel.
- HSPA: The service is carried on an HSPA channel. Enumeration Type
Indicating the bear type of the DSP is MTP3 or M3UA. Enumeration Type
HeatBeat Sending Time Interval. Interval Type
HeatBeat Sending Time Interval. Interval Type
HeatBeat Sending Time Interval. Interval Type
The bit rate threshold used to determine whether to perform soft handover
for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all
the BE services of a user are lower than or equal to this threshold, the
system will perform soft handover for this user to guarantee the service
quality. When the velocity of the downlink DCH exceeds the restriction of
this parameter, RNC will perform intra-frequence hard handover. To avoid
the great effect of the system capacity when multi-links transmit a great
deal of the same data in the macro diversity. Enumeration Type
The first action selected by the QoS control algorithm when the DL QoS of
BE service deteriorates.If QoS action is RateDegrade, then the rate will be
downsized to the full coverage rate according to 3-rates rule. Enumeration Type
The second action selected by the QoS control algorithm when the DL QoS
of BE service deteriorates.If QoS action is RateDegrade, then the rate will
be downsized to the full coverage rate according to 3-rates rule. Enumeration Type
The third action selected by the QoS control algorithm when the DL QoS
of BE service deteriorates.If QoS action is RateDegrade, then the rate will
be downsized to the full coverage rate according to 3-rates rule. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from E_FACH to DCH. This parameter prevents
unnecessary reports that are caused by traffic volume instability from being
triggered. If the value of this parameter is too high, the period of reporting
4A event is delayed and congestion may occur over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from E_FACH to HS-DSCH. If the
value of this parameter is too high, congestion may occur over the common
channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from E_FACH to HS-DSCH. This parameter
prevents unnecessary reports that are caused by traffic volume instability
from being triggered. If the value of this parameter is too high, the period of
reporting 4A event is delayed and congestion may occur over the common
channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from FACH to E-DCH with CPC
technology. If the value of this parameter is too high, congestion may occur
over the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from FACH to E-DCH with CPC technology. This
parameter prevents unnecessary reports that are caused by traffic volume
instability from being triggered. If the value of this parameter is too high,
the period of reporting 4A event is delayed and congestion may occur over
the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from FACH to HS-DSCH with CPC
technology. If the value of this parameter is too high, congestion may occur
over the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from FACH to HS-DSCH with CPC technology.
This parameter prevents unnecessary reports that are caused by traffic
volume instability from being triggered. If the value of this parameter is too
high, the period of reporting 4A event is delayed and congestion may occur
over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from FACH to DCH. If the value of
this parameter is too high, congestion may occur over the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from FACH to DCH. This parameter prevents
unnecessary reports that are caused by traffic volume instability from being
triggered. If the value of this parameter is too high, the period of reporting
4A event is delayed and congestion may occur over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from FACH to E-DCH. If the value
of this parameter is too high, congestion may occur over the common
channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from FACH to E-DCH. This parameter prevents
unnecessary reports that are caused by traffic volume instability from being
triggered. If the value of this parameter is too high, the period of reporting
4A event is delayed and congestion may occur over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of BE services from FACH to HS-DSCH. If the
value of this parameter is too high, congestion may occur over the common
channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of BE services from FACH to HS-DSCH. This parameter
prevents unnecessary reports that are caused by traffic volume instability
from being triggered. If the value of this parameter is too high, the period of
reporting 4A event is delayed and congestion may occur over the common
channel. Enumeration Type
The first action selected by the QoS control algorithm when the UL QoS of
BE service deteriorates.If QoS action is RateDegrade, then the rate will be
downsized to the full coverage rate according to 3-rates rule. Enumeration Type
The second action selected by the QoS control algorithm when the UL QoS
of BE service deteriorates.If QoS action is RateDegrade, then the rate will
be downsized to the full coverage rate according to 3-rates rule. Enumeration Type
The third action selected by the QoS control algorithm when the UL QoS
of BE service deteriorates.If QoS action is RateDegrade, then the rate will
be downsized to the full coverage rate according to 3-rates rule. Enumeration Type
(1) This parameter, along with the [Algorithm start time], is used to limit
the validation time of the background noise automatic updata algorithm. If
[Algorithm stop time] is greater than [Algorithm start time], and the
background noise automatic updata algorithm is enabled, then the algorithm
is activated during the period of [Algorithm stop time] to [Algorithm start
time] each day. In other periods, the algorithm fails. If [Algorithm stop
time] is less than [Algorithm start time], and the background noise
automatic updata algorithm is enabled, then the algorithm is activated
during the period of [Algorithm stop time] each day to [Algorithm start
time] of the next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
Compound Type
When the number of uplink equivalent users is not larger than this
parameter, the RTWP could be regarded as background noise. Therefore,
the measured RTWP could be input to the auto-adaptive background noise
update filter; otherwise, the RTWP could not be regarded as background
noise, and should not be input to the filter, and at the same time, the auto-
adaptive status should be reset. Interval Type
(1) This parameter, along with the [Algorithm stop time], is used to limit
the validation time of the background noise automatic updata algorithm. If
[Algorithm stop time] is greater than [Algorithm start time], and the
background noise automatic updata algorithm is enabled, then the algorithm
is activated during the period of [Algorithm stop time] to [Algorithm start
time] each day. In other periods, the algorithm fails. If [Algorithm stop
time] is less than [Algorithm start time], and the background noise
automatic updata algorithm is enabled, then the algorithm is activated
during the period of [Algorithm stop time] each day to [Algorithm start
time] of the next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
Compound Type
When the parameter is 'OFF', the auto-adaptive background noise update
algorithm is switched off. Otherwise, the algorithm is switched on. Enumeration Type
The difference of RTWP that trigger the update of background noise. If the
difference is larger than the threshold, the background will be updated. Interval Type
This parameter specifies the target transmission quality of DCH, that is,
target BLER of DCH on the radio interface if the subflow is carried on
DCH. This QoS-related parameter is used by the CRNC to determine the
target SIR value for use in admission and power control. To calculate the
value of this parameter, obtain the result of 10*Lg(BLER) where the BLER
refers to the actual BLER, and then round the result up. Interval Type
Indicating whether to perform blind handover.
FALSE: The cell is not in the alternative cells for blind handover, so blind
handover to this cell cannot be triggered.
TRUE: The cell is in the alternative cells for blind handover, so blind
handover to this cell might be triggered. Enumeration Type
This parameter is used in the algorithm of the load reshuffling (LDR) intra-
frequency blind handover. This parameter defines how many measurement
reports are needed for making the blind handover decision. The RNC starts
blind handover only if the UE continuously reports adequate intra-
frequency measurement reports that meet the quality requirements of blind
handover. During the measurement process, if the UE reports an
unqualified measurement report, the process ends. And the RNC does not
start blind handover on the target cell. Enumeration Type
Enumeration Type
This parameter specifies the type of a board. Enumeration Type
This parameter specifies the type of a board. Enumeration Type
This parameter specifies the type of a board. Enumeration Type
This parameter specifies the type of the board where the command is
executed. Enumeration Type
This parameter specifies the type of a board. Enumeration Type
This parameter specifies the type of a board. Enumeration Type
This parameter specifies the type of the board to be set. Enumeration Type
If the available backward bandwidth is less than or equal to this value, the
backward congestion alarm is emitted. Interval Type
If the available backward bandwidth is less than or equal to this value, the
backward congestion alarm is emitted. Interval Type
Number of the subrack from which the AAL2 Path is led out of RNC. Interval Type
This field indicate whether the IP Path is carried on IP logic port or
resource group or null. Enumeration Type
This parameter specifies the number of the fractional ATM link bearing
PVC. The fractional ATM link must have been configured. Interval Type
This parameter specifies the number of the IMA group bearing the PVC.
The IMA group must have been configured. Interval Type
SAAL, SCTP, SAAL-SCTP. When the NCP is based on ATM, set Bearing
link type to SAAL. When the NCP is based on IP, set Bearing link type to
SCTP. When the NCP is based on ATM/IP, set Bearing link type to SAAL-
SCTP. For detailed information of this parameter, refer to 3GPP TS 25.430. Enumeration Type
This parameter specifies the number of the port on the UOIa_ATM bearing
VCL. Interval Type
This parameter specifies the number of the optical port that carries the
logical port. Interval Type
This parameter specifies the number of the UNI link bearing PVC. The
UNI link must have been configured. Interval Type
The value of bearing VCI.VCI of the SAAL link that goes out of the RNC. Interval Type
The value of bearing VPI.VPI of the SAAL link that goes out of the RNC. Interval Type
This parameter specifies the number of the ATM logic port bearing VCL. Interval Type
IP address of the CBC (Cell Broadcast Center). IP Address Type
Mask of the sub-network of the CBC IP address. IP Address Type
This parameter specifies the maximum burst size. Interval Type
A CBS Operator of the cell. Interval Type
Together with PLMN code and LAC, uniquely corresponding to a cell. Interval Type
Switch of inner CBS. Enumeration Type
If the cell downlink load exceeds this threshold, the algorithm will
decrease the pilot transmit power of the cell so as to increase the whole
system's capacity. This parameter is based on network planning. When the
cell breathing algorithm is activated, if the value is too small, the physical
coverage of the cell is limited so as to avoid cell capacity waste. If the value
is too great, the physical coverage is expanded and interference over other
cells is increased. Interval Type
If the times the UE in the CELL_PCH state performs cell reselection is
greater than or equal to the threshold, it is regarded that the cell reselection
is frequent. When the timer expires, the target state is set to URA_PCH. In
the next cell update procedure, the UE is informed of state transition to
URA_PCH in the CELL_UPDATE_CONFIRM message. Interval Type
Length of the cell reselection frequency timer. This parameter is used
together with CellReSelectCounter to detect the frequency of cell
reselection of the UE in the CELL_PCH state. Interval Type
Indicating whether the cell is reserved for extension. If [Cell barred
indicator] is NOT_BARRED, and the cell is not reserved for operators but
for extension, the UEs regard the cell as barred. For detailed information of
this parameter, refer to 3GPP TS 25.331. Enumeration Type
If the cell downlink load is lower than this threshold, the algorithm will
increase the pilot transmit power of the cell so as to share load of other
cells. This parameter is based on network planning. When the cell breathing
algorithm is activated, if the value is too small, the physical coverage of the
cell is limited so as to avoid cell capacity waste. If the value is too great, the
physical coverage is expanded and interference over other cells is
increased. Interval Type
IP Path Ping Timeout Counts.The IP Path fault alarm will occur when the
number of unsuccessful ping operation reaches this value. Interval Type
Channel index for MBMS performance. Enumeration Type
This parameter specifies the index of the BFD. The check index is unique.
If the check index is not specified, a unique value ranging from 0 to 31 is
automatically allocated. Interval Type
Whether to calculate the checksum during message receiving. Enumeration Type
Whether to calculate the checksum during message sending. Enumeration Type
According to RFC4960, ALDER32 is not suitable for checksum in SCTP,
CRC32 is recommended. Enumeration Type
This parameter specifies the type of the check on gateway. Enumeration Type
If you set this parameter to TEN_MSEC, use [DL basic meas rprt
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [DL basic meas rprt cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [DL OLC meas rprt cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [HSDPA need pwr meas cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
Value range: TEN_MSEC, MIN
Physical value range: 10 milliseconds, 1 minute
Content: If you set this parameter to TEN_MSEC, use [UL basic meas rprt
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [UL basic meas rprt cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433.
Recommended value: TEN_MSEC Enumeration Type
If you set this parameter to TEN_MSEC, use [UL OLC meas rprt
cycle,Unit:10ms] to specify the measurement report period. If you set this
parameter to MIN, use [UL OLC meas rprt cycle,Unit:min] to specify
measurement report period. For detailed information of this parameter, refer
to 3GPP TS 25.433. Enumeration Type
This parameter specifies the reporting period of the event E of the AMR
service. The unit of the reporting period can be 10 ms or minute. Enumeration Type
This parameter specifies the reporting period of the event E of the BE
service. The unit of the reporting period can be 10 ms or minute. Enumeration Type
This parameter specifies the index of the operator group that serves the
cell. Interval Type
Uniquely identifying Cn operator name. String Type
Indicating a Cn Operator. Interval Type
Cn Operator index. Interval Type
Cn Operator 1 index. Interval Type
Cn Operator 2 index. Interval Type
Cn Operator 3 index. Interval Type
Cn Operator 4 index. Interval Type
Common Operator Index. Interval Type
Identify operator number in operator group which is not belong to the
common operator number. Enumeration Type
CN protocol version. Enumeration Type
Code reshuffle switch based on H. If the switch is enabled, code occupied
by the R99 service is adjusted toward codes with small numbers. When
[Allocate Code Mode] is set to Automatic, code can be used by HSDPA
increases and HSDPA throughput is improved. Enumeration Type
H-based code tree reshuffle user number threshold. When the switch is
enabled, if the number of users on the tree to be reshuffled is no greater
than this parameter, the reshuffle is allowed. Otherwise, the reshuffle is
given up. This parameter limits the number of users involved in one
reshuffle so that reshuffle on lots of users at a time is avoided. Interval Type
This parameter specifies one of the triggering conditions of code balancing
DRD. (The other condition is the minimum spreading factor.) This
condition refers to that the code occupancy in the best cell is not lower than
the value of this parameter. Interval Type
This parameter specifies whether the code balancing DRD algorithm will
be applied.
- ON: The code balancing DRD algorithm will be applied.
- OFF: The code balancing DRD algorithm will not be applied.
Enumeration Type
The port flow control is disabled when the buffer duration of queue 5 is
smaller than or equal to the value of this parameter. Interval Type
The port flow control is enabled when the buffer duration of queue 0 is
larger than or equal to the value of this parameter. When the port flow
control type is ATM, this parameter specifies the congestion threshold of
the CBR queue. Interval Type
The port flow control is enabled when the buffer duration of queue 1 is
larger than or equal to the value of this parameter. When the port flow
control type is ATM, this parameter specifies the congestion threshold of
the RTVBR queue. Interval Type
The port flow control is enabled when the buffer duration of queue 2 is
larger than or equal to the value of this parameter. When the port flow
control type is ATM, this parameter specifies the congestion threshold of
the NRTVBR queue. Interval Type
The port flow control is enabled when the buffer duration of queue 3 is
larger than or equal to the value of this parameter. When the port flow
control type is ATM, this parameter specifies the congestion threshold of
the UBR queue. Interval Type
The port flow control is enabled when the buffer duration of queue 4 is
larger than or equal to the value of this parameter. When the port flow
control type is ATM, this parameter specifies the congestion threshold of
the UBR+ queue. Interval Type
The port flow control is enabled when the buffer duration of queue 5 is
larger than or equal to the value of this parameter. Interval Type
The hysteresis value of the serving FDD cells in connected mode in case
the quality measurement for cell selection and reselection is set to CPICH
RSCP. It is related to the slow fading feature of the area where the cell is
located. The greater the slow fading variance is, the greater this parameter.
According to the R regulation, the current serving cell involves in cell
selection after the measurement value is added with the hysteresis value.
The measurement hysteresis aims to prevent the ping-pong effect of the cell
reselection, which is caused by the slow fading when the UE is on the edge
of the cell. The ping-pong effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates (CELL_FACH,
CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading as well as ensuring
timely cell updates of the UE. According to the CPICH RSCP emulation
report of inter-frequency hard handovers, the measurement hysteresis
ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow
fading variance is 8 dB and the relative distance is 20 m. In the cells where
the slow fading variance is low and the average moving speed of UEs is
high, for example the suburbs and countryside, reduce the measurement
hysteresis to guarantee timely location updates of UEs. The higher the
measurement hysteresis is, the less likely it is for various types of cell
reselections to occur, and the better the slow fading resistance capability is,
but the slower the system reacts to the environment changes. For detailed
information of this parameter, refer to 3GPP TS 25.304.
Interval Type
The hysteresis value of the serving FDD cells in connected mode in case
the quality measurement for cell selection and reselection is set to CPICH
Ec/No. It is related to the slow fading feature of the area where the cell is
located. The greater the slow fading variance is, the greater this parameter.
This parameter is not configured when its value is 255.
According to the R regulation, the current serving cell involves in cell
selection after the measurement value is added with the hysteresis value.
The measurement hysteresis aims to prevent the ping-pong effect of the cell
reselection, which is caused by the slow fading when the UE is on the edge
of the cell. The ping-pong effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates (CELL_FACH,
CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading as well as ensuring
timely cell updates of the UE. According to the CPICH RSCP emulation
report of inter-frequency hard handovers, the measurement hysteresis
ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow
fading variance is 8 dB and the relative distance is 20 m. In the cells where
the slow fading variance is low and the average moving speed of UEs is
high, for example the suburbs and countryside, reduce the measurement
hysteresis to guarantee timely location updates of UEs. The higher the
measurement hysteresis is, the less likely it is for various types of cell
reselections to occur, and the better the slow fading resistance capability is,
but the slower the system reacts to the environment changes. For detailed
information of this parameter, refer to 3GPP TS 25.304.
Interval Type
This parameter specifies whether to run the ping command consecutively. Enumeration Type
This parameter specifies the DL maximum bit rate of conversation for PS
domain user. Enumeration Type
This parameter specifies the UL maximum bit rate of conversation for PS
domain user. Enumeration Type
Maximum rate of the wideband AMR speech service for copper users. Enumeration Type
Maximum rate of the narrowband AMR speech service for copper users. Enumeration Type
This parameter specifies the number of sent packets. Interval Type
Count-C checking values. Interval Type
Counter check switch. Enumeration Type
Maximum number of cell reselection. This parameter, along with the [Time
for evaluating max cell reselection], is used for rate evaluation in HCS. For
details, refer to 3GPP TS 25.304. Interval Type
This field indicate whether the cross IP address is available. Enumeration Type
R99 CS conversational service downlink factor. Interval Type
This parameter defines the length of penalty timer for SHO failure after
rate reduction in the active set.
When the rate reduction in the active set is performed which triggers the
increase of SHOs in the target cell, if the target cell fails to join the active
again, the RNC starts the penalty timer for SHO failure. This parameter
defines the length of the penalty timer. Before the timer expires, the rate
increasing in the active set is prohibited, but rate reduction is not
prohibited.
Such penalty strategy is applied in the following scenario:
If there is a cell, for some reason, it has high signal strength but heavy load,
and cannot join the active set throughout by then. This cell may enter the
SHO rate reduction evaluation process repeatedly, which results in rate
reduction in the active set. If the cell fails to join the active set, the rate in
the active set may increase during the evaluation process because of the
DCCC algorithm. To avoid such rate fluctuation, the RNC uses a strategy
of rate increase penalty after the SHO failure again.
Interval Type
Strategy for adjustment of the rate of the PS BE service when the UE is in
the CELL_DCH state. RATE_UP_AND_DOWN_ON_DCH indicates that
the rate over the DCH can be raised or lowered. RATE_UP_ONLY
indicates that the rate over the DCH can only be raised, which means that
the UE can switch to the FACH state at any rate. Enumeration Type
Length of the penalty period within which the rate of a BE service cannot
be increased even if the 4A measurement report is received. Increase of the
BE service rate is triggered by the 4A measurement report.4A report will
not be processed until this Penalty Timer expires. Interval Type
This parameter specifies the period of DCH throughput ratio
measurement.Macd performs statistic of traffic volume on DCH and reports
4B events which are used for the rate decrease process of BE service set up
on DCH. Interval Type
This parameter specifies the default operator that RNC chooses in the
MOCN cell. The value 255 means that no default operator is defined. Interval Type
This parameter specifies the constant that is used by the RNC to compute
the DPCCH_Power_Offset which is further used by the UE to calculate the
UL DPCCH_Initial_Power during the open-loop power control. The
formulas are as follows:
DPCCH_Power_Offset = Primary CPICH DL TX power + UL interference
+ Default Constant Value
DPCCH_Initial_Power = DPCCH_Power_Offset - CPICH_RSCP
where DPCCH_Power_Offset is the DPCCH initial transmit (TX) power
offset, Primary CPICH DL TX power is the downlink TX power of P-
CPICH, and CPICH_RSCP is the received signal code power of the P-
CPICH measured by the UE.
A small value of DPCCH_Power_Offset might lead to uplink
synchronization failure at cell edges during link setup, thus affecting the
uplink coverage. A large value of DPCCH_Power_Offset, however, has
instantaneous interference on uplink reception, thus affecting the uplink
reception performance. For details of CPICH_RSCP, refer to the 3GPP TS
25.331.
Interval Type
When the RNC is performing downlink open power control, it evaluates
link consumption according to the PCPICH TX power and the PCPICH
signal intensity detected in UE access. However, in some cases, the UE
may not report the signal intensity. In this situation, the RNC uses this
parameter to evaluate link consumption. Interval Type
This parameter specifies the delay time. When the RNC recovers from
disaster and starts to operate, it performs re-host policy for the primary
hosted NodeB after the specified delay time. Interval Type
M3UA destination entity indexes and M3UA destination entity have a one-
to-one correspondence. Interval Type
This parameter specifies the destination IP address. IP Address Type
This parameter specifies a destination IP address. IP Address Type
This parameter specifies the ID of a remote MEP. Interval Type
This parameter specifies an MEP in an MA. Interval Type
This parameter specifies the period of reporting the DGPS data. Interval Type
This parameter specifies the direction that the traffic volume measurement
is applicable to.
- DOWNLINK: indicates downlink traffic volume measurement.
- UPLINK: indicates uplink traffic volume measurement or E-DCH
throughput measurement. Enumeration Type
This parameter specifies the default rate threshold for decision to use DCH
to carry DL PS domain background/interactive services. If the FRC
parameters of the best cell cannot be obtained, this default value will be
used. Only when the DL service rate is higher than or equal to this
threshold, and the UL service rate is higher than or equal to the uplink
threshold, the service will be set up on DCH. Otherwise, it will be set up on
CCH. According to the product specifications, only the
background/interactive services whose rate is lower than 16 kbit/s can be
carried on the common channel.Therefore, this parameter can only be set to
16 kbit/s or 8 kbit/s. Enumeration Type
Different admission policies are used for dedicated channel and common
channel users. For common channel users, resources instead of separate
power admission decision are reserved. For dedicated channel users,
according to the current load factor and the characteristics of the new call,
the CAC algorithm predicts the new TX power with the assumption of
admitting the new call, then plus with the premeditated common channel
DL load factor to get the predicted DL load factor. Then, compare it with
the DL admission threshold. If the value is not higher than the threshold,
the call is admitted; otherwise, rejected. Interval Type
Admission threshold of the total cell downlink power. If the value is too
high, too many users will be admitted. However, the throughput of a single
user is easy to be limited. If the value is too low, cell capacity will be
wasted. Interval Type
This parameter specifies the compression method that the NodeB supports
in the downlink.
- SF/2: SF reduction by two
- HIGHER_LAYER_SCHDL: higher layer scheduling
If both SF/2 and HIGHER_LAYER_SCHDL are selected, the NodeB
supports both of the compression methods in the downlink. Bit Field Type
For a BE service that has a low maximum rate, the DCCC algorithm is not
obviously effective yet it increases algorithm processing. Thus, the traffic-
based DCCC algorithm is applied to BE services whose maximum DL rate
is greater than the threshold. Enumeration Type
The UE can be selected to process load handover only when its bandwidth
is less than this threshold. The higher the parameter is, the higher the
service rate of the user in handover is, and the more obviously the cell load
is decreased. However, high value of the parameter gives rise to the
fluctuation and congestion of the target cell load. The lower the parameter
is, the smaller amplitude of the load decreases as a result of the inter-
frequency load handover, and the easier it is to maintain the stability of the
target cell load. Interval Type
If the ratio of DL load of the cell to the downlink capacity is not lower than
this threshold, the DL load reshuffling function of the cell is triggered. After
the basic congestion state of the cell load is released, the system no longer
implements the LDR action. Because the load fluctuates, the difference
between the LDR release threshold and trigger threshold should be higher
than 10%. The ping-pong effect of the preliminary congestion state may
occur. The lower the LDR trigger and release thresholds are, the easier the
system enters the preliminary congestion status, the harder it is released
from this status, the easier the LDR action is triggered, and the more likely
the users are affected. But, the admission success rate becomes higher since
the resources are preserved. The carrier shall make a trade-off between
these factors. Interval Type
If the DL load state of the cell is lasted longer than this threshold, the DL
load state of the cell transfers. Interval Type
This parameter specifies the maximum number of TFCs (Transport Format
Combination) allowed in the downlink. The larger the value of this
parameter, the larger the number of available TFCs in the downlink. Enumeration Type
Reserved DL power factor for MBMS service. Interval Type
Threshold of the DL intermediate rate when the 3-step mode is used for DL
rate adjustment and the manual mode is used for DL intermediate rate
adjustment. Enumeration Type
The AMRC needs to check whether the TFO/TrFO exists before adjusting
DL AMR speech rate. If the TFO/TrFO does not exist, the CN has the
associated encoder and the RNC delivers the RATE CONTROL command
to the CN and starts the timer. If the TFO/TrFO exists, the CN has no
associated encoder and the local RNC delivers to the peer RNC a command
requesting the AMR mode at a lower level. In addition, the local RNC starts
the timer. After the peer RNC receives the command, it directly uses the
AMR mode at a lower level for the UL and returns the adjustment
information to the local RNC. If the acknowledgement message is received
before the timer expires, the adjustment of the DL AMR speech rate is
successful. Otherwise, the adjustment fails. If there is no TFO/TrFO, it is
recommended that the timer be set to 3000 ms. If there is the TFO/TrFO, it
is recommended that the timer be set to 7000 ms because of more
procedures involved in rate adjustment. Interval Type
DL activity factor of the R99 non AMR conversational service. Interval Type
Interval Type
L3 filtering coefficient. The larger the value of this parameter, the stronger
the smoothing effect and the higher the anti-slow-fading capability, but the
lower the signal change tracing capability. For detailed information of this
parameter, refer to 3GPP TS 25.433. Enumeration Type
If the ratio of DL load of the cell to the downlink capacity is lower than
this threshold, the DL overload and congestion control function of the cell
is stopped. The lower the OLC trigger threshold is, the easier the system is
in the overload status. An excessively low value of the OLC trigger
threshold is very detrimental to the system performance. The lower the
OLC release threshold is, the harder the system releases the overload. The
value of the OLC release threshold should not be much lower than or close
to the OLC trigger threshold, or the system state may have a ping-pong
effect. The recommended difference between the OLC release threshold and
the OLC trigger threshold is higher than 10%. It is desirable to set the two
parameters a bit higher given that the difference between OLC trigger
threshold and OLC release threshold is fixed. Interval Type
User release is an extreme method in reducing the cell load and recovering
the system when the cell is overloaded and congested.
The mechanism of the OLC is that an action is performed in each [OLC
period] and some services are selected based on the action rules to perform
this action. This parameter defines the maximum number of RABs released
in executing downlink OLC service release.
For the users of a single service, the releasing of RABs means the complete
releasing of the users. The releasing of RABs causes call drops, so
UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes should be set to a low
value. Higher values of the parameter get the cell load to decrease more
obviously, but the QoS will be affected.
Interval Type
The percentage of other service thresholds to the 100% downlink load. The
services refer to other admissions except the conversational AMR service,
conversational non-AMR service, and handover scenarios. It is applicable
to algorithm 1 and algorithm 2. The parameter is used for controlling other
service admissions. That is, when a service is accessing, the RNC
evalutates the measurement value of the downlink load after the service is
accessed. If the DL load of a cell is higher than this threshold after the
access of a service, this service will be rejected. If the DL load of a cell will
not be higher than this threshold, this service will be admitted.
The DL load factor thresholds include parameters of [DL threshold of Conv
non_AMR service], [DL handover access threshold] and [DL threshold of
other services]. The four parameters can be used to limit the proportion
between the conversational service, handover user and other services in a
specific cell, and to guarantee the access priority of other services. If the
value is too high the system load after admission may be over large, which
impacts system stability and leads to system congestion. If the value is too
low, the possibility of user rejects may increase, resulting in waste in idle
resources and the failure to achieving network planning target.
Interval Type
When the algorithm 2 is used, this parameter defines the total equivalent
user number corresponding to the 100% downlink load. he parameter
should be related to the admission threshold and actual condition of the
network. If the value is too high, the system load after admission may be
over large, which impacts system stability and leads to system congestion.
If the value is too low, the possibility of user rejects may increase, resulting
in waste in idle resources. Interval Type
This parameter indicates DPCH diversity mode for MIMO user. Enumeration Type
This parameter indicates the TX diversity preferably selected by DPCH. Enumeration Type
This parameter specifies the direction of activating the check on a VCL. Enumeration Type
10ms.
3) DRA_BE_RATE_DOWN_BF_HO_SWITCH: When the switch is on,
the bandwidth for BE services is reduced before soft handover. It is
recommended that the DCCC switch be on when this switch is on.
4) DRA_DCCC_SWITCH: When the switch is on, the dynamic channel
reconfiguration control algorithm is used for the RNC.
5) DRA_HSDPA_DL_FLOW_CONTROL_SWITCH: When the switch is
on, power control is enabled for HSDPA services in AM mode.
6) DRA_HSDPA_STATE_TRANS_SWITCH: When the switch is on, the
status of the UE RRC that carrying HSDPA services can be changed to
CELL_FACH at the RNC. If a PS BE service is carried over the HS-DSCH,
the switch PS_BE_STATE_TRANS_SWITCH should be on
simultaneously. If a PS real-time service is carried over the HS-DSCH, the
switch PS_NON_BE_STATE_TRANS_SWITCH should be on
simultaneously.
7) DRA_HSUPA_DCCC_SWITCH: When the switch is on, the DCCC
algorithm is used for HSUPA. The DCCC switch must be also on before
this switch takes effect.
8) DRA_HSUPA_STATE_TRANS_SWITCH: When the switch is on, the
status of the UE RRC that carrying HSUPA services can be changed to
CELL_FACH at the RNC. If a PS BE service is carried over the E-DCH,
the switch PS_BE_STATE_TRANS_SWITCH should be on
simultaneously. If a PS real-time service is carried over the E-DCH, the
switch PS_NON_BE_STATE_TRANS_SWITCH should be on
simultaneously.
9) DRA_IU_QOS_RENEG_SWITCH: When the switch is on and the Iu
QoS RENEQ license is activated, the RNC supports renegotiation of the
maximum rate if the QoS of real-time services is not ensured according to
the cell status.
10) DRA_PS_BE_STATE_TRANS_SWITCH: When the switch is on, UE
RRC status transition (CELL_FACH/CELL_PCH/URA_PCH) is allowed
at the RNC.
11) DRA_PS_NON_BE_STATE_TRANS_SWITCH: When the switch is
on, the status of the UE RRC that carrying real-time services can be
changed to CELL_FACH at the RNC.
12) DRA_R99_DL_FLOW_CONTROL_SWITCH: Under a poor radio
environment, the QoS of high speed services drops considerably and the Bit Field Type
TX power is overly high. In this case, the RNC can set restrictions on
This parameter is used as the DRD Ec/No threshold of whether to perform
the blind handover.
This parameter is used as the DRD Ec/No threshold of whether to perform
the blind handover. When choosing a DRD candidate cell, if the Ec/No
value of the current cell is greater than the threshold of inter-RAT/inter-
frequency neighboring cell, the DRD is permitted. Interval Type
A timer to DRNC wait for AAL2 setup indication. Interval Type
A timer to DRNC wait for radio link reconfiguration commit. Interval Type
When the buffer duration of queue 4 is larger than or equal to the value of
this parameter, packets begin to be discarded. When the port flow control
type is ATM, this parameter specifies the packet discard threshold of the
UBR+ queue. Interval Type
When the buffer duration of queue 5 is larger than or equal to the value of
this parameter, packets begin to be discarded. Interval Type
This parameter specifies the number of the E1/T1 port bearing the PPP
link. Interval Type
Whether to enable the automatically triggered DSAC algorithm. Enumeration Type
This parameter specifies the DiffServ Code Point for the ping command. Interval Type
This parameter specifies the number of a DSP. Interval Type
This parameter specifies whether the DST is used. Enumeration Type
This parameter specifies the destination end of timeslot cross connection,
corresponding to the electrical port of the board. Interval Type
Number of periods before the throughput ratio event 4B for state transition
from E-DCH to FACH is triggered. When the throughput ratio is below the
lower threshold and remains so for the period specified by this parameter,
the event 4B is reported. This parameter prevents unnecessary throughput
ratio events that are caused by throughput ratio instability from being
triggered. Time to trigger the throughput ratio event 4B = value of this
parameter x 10 ms. Interval Type
The parameter specifies the number of codes (SF=256) used by the E-DCH
Absolute Grant Channel (E-AGCH). If the parameter value is set too high,
the downlink codes are wasted. If the parameter value is set too low, the
uplink throughput of the HSUPA is restricted. For details about this
parameter, refer to 3GPP TS 25.433. Interval Type
This parameter specifies the threshold for determining the signal quality in
a cell. If the reported Ec/N0 exceeds the value of this parameter, you can
infer that the signal quality in the cell is good and a high code rate can be
set for initial access. Interval Type
This parameter specifies the end date of the DST. The value 30 and 31 is
invalid in February. Interval Type
This parameter specifies the first MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the tenth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the eleventh MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the twelfth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the second MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the third MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the fourth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the fifth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the sixth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the seventh MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the eighth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the ninth MAC-d PDU size used by HSUPA
services. The size must be a multiple of 8 bits. Interval Type
This parameter specifies the maximum allowed SIR decrease step for
HSUPA within an adjustment period of outer-loop power control. Interval Type
The large target retransmit times for E-DCH MAC-ES PDU used to bear
the service. Interval Type
The little target retransmit times for E-DCH MAC-ES PDU used to the
normal service. Interval Type
This parameter specifies the end month of the DST. Enumeration Type
This parameter specifies the IP address for the EMS. IP Address Type
The encryption algorithm supported by RNC. Both UEA0 and UEA1 can
be selected at one time. Bit Field Type
End time of the first interval when the "Cell dynamic shutdown" feature is
valid. Compound Type
End time of the second interval when the "Cell dynamic shutdown" feature
is valid. Compound Type
End time of the third interval when the "Cell dynamic shutdown" feature is
valid. Compound Type
This parameter specifies the end time of the DST. Compound Type
This parameter specifies the threshold to trigger event 4A related to DCH
traffic volume, that is, the upper limit of the traffic volume. The larger the
value of this parameter, the smaller the possibility of triggering traffic-
related event 4A on DCH. Enumeration Type
This parameter specifies the threshold to trigger event 4B related to DCH
traffic volume, that is, the lower limit of the traffic volume. The smaller the
value of this parameter, the smaller the possibility of triggering traffic-
related event 4B on DCH. Enumeration Type
This parameter specifies the event A reporting period. It refers to the delay
from the moment when event A is triggered to the moment when the event
is reported. Interval Type
This parameter specifies the threshold of event A, that is, the upper limit of
RLC retransmission ratio. Interval Type
This parameter specifies the threshold of event B, that is, the lower limit of
RLC retransmission ratio. Interval Type
This parameter specifies the DST start day in a week. Enumeration Type
This parameter specifies the DST end week in a month. Enumeration Type
This parameter specifies the upper threshold for signal output of external
analog 1(unit:ampere/volt). String Type
This parameter specifies the lower threshold for signal output of external
analog 1(unit:ampere/volt). String Type
This parameter specifies the sensor type of external analog 1. Enumeration Type
This parameter specifies the upper threshold for measurement range of
external analog 1. String Type
This parameter specifies the lower threshold for measurement range of
external analog 1. String Type
This parameter specifies the upper threshold for signal output of external
analog 2(unit:ampere/volt). String Type
This parameter specifies the lower threshold for signal output of external
analog 2(unit:ampere/volt). String Type
This parameter specifies the sensor type of external analog 2. Enumeration Type
This parameter specifies the upper threshold for measurement range of
external analog 2. String Type
This parameter specifies the lower threshold for measurement range of
external analog 2. String Type
This parameter specifies the upper threshold for signal output of external
analog 3(unit:ampere/volt). String Type
This parameter specifies the lower threshold for signal output of external
analog 3(unit:ampere/volt). String Type
This parameter specifies the sensor type of external analog 3. Enumeration Type
This parameter specifies the upper threshold for measurement range of
external analog 3. String Type
This parameter specifies the lower threshold for measurement range of
external analog 3. String Type
This parameter specifies the upper threshold for signal output of external
analog 4(unit:ampere/volt). String Type
This parameter specifies the lower threshold for signal output of external
analog 4(unit:ampere/volt). String Type
This parameter specifies the sensor type of external analog 4. Enumeration Type
This parameter specifies the upper threshold for measurement range of
external analog 4. String Type
This parameter specifies the lower threshold for measurement range of
external analog 4. String Type
Pending time after the traffic volume event 4B is reported. This parameter
is used to prevent too many traffic volume events 4B being reported. Enumeration Type
When the traffic volume is below the 4B threshold and remains so for the
period specified by this parameter, the event 4B is reported. This parameter
prevents unnecessary traffic volume events that are caused by traffic
volume instability from being triggered. Enumeration Type
Uniquely identifying a FACH in a cell. Interval Type
This parameter specifies the maximum power of the FACH. Interval Type
Indicating whether the FACH measurement occasion period length
coefficient should be delivered through the system information. If the inter-
freq or inter-RAT measurement control information is broadcast through the
system information, some UEs in CELL_FACH state need the FACH
measurement occasion period length coefficient for measurement. When
[Inter-freq/Inter-RAT Meas Ctrl Info Ind] is set to NOT_REQUIRE, this
parameter is not required. This parameter need not be configured when
there is no inter-RAT or intra-frequency cells. To have the UE perform
inter-frequency or inter-RAT cell reselection, the FACH measurement
indicator needs to be configured. Enumeration Type
This parameter defines the reduce value in reducing FACH power Action. Interval Type
This parameter specifies the factor associated with the scheduling priority
indicator. This factor is used to calculate the step of rate upsizing. Interval Type
This parameter specifies the activity factor. The configured bandwidth of
the CCP, NCP, ALCAP, or OM link IPoA PVC multiplied by the activity
factor is the bandwidth of the link. Interval Type
This parameter specifies whether to send and receive flow control frame in
the Ethernet. It indicates whether to enable the flow control. Enumeration Type
This parameter specifies the flow control parameter index. Interval Type
This parameter specifies the CRC check mode. Enumeration Type
This parameter specifies the step size of the closed-loop power control
performed on DL DPCH in Frequency Division Duplex (FDD) mode. For
details of this parameter, refer to the 3GPP TS 25.214. Enumeration Type
This parameter indicates FDPCH diversity mode for MIMO user. Enumeration Type
This parameter indicates FDPCH diversity mode for non MIMO user. Enumeration Type
This parameter specifies the maximum reference power for the F-DPCH.
This parameter indicates the maximum value of reference F-DPCH TX
power, that is, the value of the Maximum DL Power IE. For details of this
parameter, refer to the 3GPP TS 25.433. Interval Type
This parameter specifies the minimum reference power for the F-DPCH.
This parameter indicates the minimum value of reference F-DPCH TX
power, that is, the value of the Minimum DL Power IE. For details of this
parameter, refer to the 3GPP TS 25.433. Interval Type
This parameter specifies the power offset of TPC command in F-DPCH
channel to reference F-DPCH TX power (expressed by the Initial DL
Transmission Power IE). Interval Type
This parameter specifies the FE IP address for the DHCP server. IP Address Type
This parameter specifies the name used to save the exported file. This
name should not contain the directory. String Type
This parameter specifies the path for saving the exported file. String Type
According to the 3GPP TS 25.331, the filtering of the measurement value
is calculated using the following formula, where k represents this
parameter:
Fn = (1 - a) * Fn - 1 + a * Mn
Here,
Fn: the updated filtered measurement result
Fn - 1: the old filtered measurement result
Mn: the latest received measurement result from physical layer
measurements
a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be
applied.
L3 filtering should be able to filter as much random impulse as possible.
Thus the filtered measurement value can reflect the varying of the actual
measurement value. The input measurement value to L3 filter has been
filtered by L1 filter, where the impact of fast fading is almost eliminated.
So the L3 filtering should apply smooth filtering to shadow fading and
small amount of remaining fast fading, thus providing more reliable
measurement value for event judgement.
As for the impact on network performance:
the larger the value of this parameter, the stronger the smoothing effect and
the higher the anti-fast-fading capability, but the lower the signal tracing
capability, the greater the possibility of call drops. If the value of this
parameter is too small, unnecessary soft handover or the ping-pong
handover may occur.
Note that this parameter has great impact on the overall performance of the
handover, so you should be cautious when adjusting this parameter.
Enumeration Type
This parameter specifies the fixed MAC-hs window size. It is valid when
the [Is MAC-hs window size fixed or not] parameter is set to TRUE. Enumeration Type
Switch of the FLC algorithm. The FLC is a mandatory algorithm used in
the multi-frequency network to guarantee that UEs camping on other
frequencies can reselect the current frequency to receive the MBMS
service. Therefore, the switch is on by default. Enumeration Type
This parameter specifies whether the switch of flow control on the link is
turned on. Enumeration Type
This parameter specifies the flow ID. Interval Type
This parameter specifies the file name. The license file must be saved in
\FTP\License. If the file name is not specified, the latest license file in
\FTP\License is activated through this command. String Type
This parameter specifies the file name. String Type
When the CELLID+RTT method is selected, this parameter specifies
whether forced soft handover is performed if the number of RTT measured
result is smaller than 3. After soft handover is complete, accuracy of the
CELLID+RTT method is enhanced when the RNC obtains more radio
links. Enumeration Type
Indicating whether to check the link of the IP path with FPMUX. Only
FG2a and GOUa board support FPMUX. Enumeration Type
If the available forward bandwidth is less than or equal to this value, the
forward congestion alarm is emitted. Interval Type
If the available forward bandwidth is less than or equal to this value, the
forward congestion alarm is emitted. Interval Type
If the available forward bandwidth is less than or equal to this value, the
forward congestion alarm is emitted. Interval Type
When the remaining transmit bandwidth is greater than this parameter
value, the forward congestion alarm is cleared. Interval Type
This parameter specifies the forward congestion clear threshold. When the
remaining bandwidth reaches this parameter value, the forward congestion
alarm is cleared. Interval Type
This parameter specifies the remaining bandwidth threshold for clearing
the forward congestion. Interval Type
If the available forward bandwidth is greater than this value, the forward
congestion alarm is cleared. Interval Type
If the available forward bandwidth is greater than this value, the forward
congestion alarm is cleared. Interval Type
If the available forward bandwidth is greater than this value, the forward
congestion alarm is cleared. Interval Type
This parameter specifies the transmit bandwidth reserved for the user in
handover. Interval Type
This parameter specifies the bandwidth reserved for the forward handover. Interval Type
Reserved forward bandwidth for handover user. Interval Type
This parameter specifies the IP address for the check. IP Address Type
Geo-coordinate data format, DEG or SEC. Enumeration Type
Maximum rate of the wideband AMR speech service for gold users. Enumeration Type
Maximum rate of the narrowband AMR speech service for gold users. Enumeration Type
Indicates whether gold users involve in the switch of congestion control.
According to the policy set for gold users by operators, if service quality of
gold users should be guaranteed even in resource congestion, the switch
should be disabled. If the switch is enabled, LDR such as rate reduction and
handover also occurs on gold users even in cell resource congestion, which
impacts user service quality. If the switch is disabled, no action is
performed on gold users. Enumeration Type
This parameter specifies the period of reporting the GPS data. Interval Type
Number of the transport resource group. Interval Type
Type of the transport resource group. Type of the transport resource group. Enumeration Type
This parameter specifies the Happy bit rate of the best-effort (BE) service
with different user priorities. The Happy bit rate is the private information
element on the Iub interface and it is used for the flow control by the
NodeB. When resource is limited,the user rate reach the Happy bit rate,the
user's scheduling priority will be reduced.When Happy bit rate is set to
0,the Happy bit rate function is closed. Interval Type
This parameter indicates whether the cell of the neighboring RNC supports
the HARQ Preamble capability. Mode1 means the cell supports the HARQ
Preamble capability, whereas Mode0 means not supporting it. Enumeration Type
This parameter specifies the time used for decision of HSUPA happy bit.
The decision is based on whether all the buffered user data can be
transmitted at the current rate during the time specified by this parameter. Enumeration Type
It can be used to calculate the heartbeat interval of the idle SCTP server. Interval Type
This parameter specifies the type of link that carries the high-end
VPL/VCL cross connection.
GUI value range: UNI, IMA, FRAATM, NCOPT. Enumeration Type
This parameter is used for setting the punish timer length for adjusting
hsdpa code again. Interval Type
HCS priority of the cell belongs to. The parameter depends on HCS rules.
For details, refer to 3GPP TS 25.304. Interval Type
HSDPA background service downlink factor. Interval Type
A timer to RNC wait for relocation request in forward handover procedure. Interval Type
This parameter specifies the NodeB host type in RNC Node Redundancy
function. If the parameter value is SINGLEHOST, the physical NodeB is
managed only by one RNC. If the parameter value is PRIMHOST or
SECHOST, the physical NodeB can be managed by two RNCs.
By default, the NodeB is managed by the host RNC. When the host RNC
fails, the physical NodeB is managed by the secondary RNC. Enumeration Type
RAT handover.
7) HO_INTER_RAT_CS_OUT_SWITCH: When the switch is on, the RNC
is allowed to initiate inter-frequency measure control and the CS inter-RAT
hard handover from the 3G network to the 2G network.
8) HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_SWITCH: When the
switch is on, the NACC function is supported during the PS inter-RAT
handover from the 3G network to the 2G network in the cell change order
process. When the switch is not on, the NACC function is not supported.
When PS_3G2G_RELOCATION_SWITCH is ON, this switch is useless.
When the NACC function is supported, the UE skips the reading procedure
as the SI/PSI of the target cell is provided after the UE accesses the 2G cell.
Thus, the delay of inter-cell handover is reduced.
9) HO_INTER_RAT_PS_3G2G_RELOCATION_SWITCH: When the
switch is on, the PS inter-RAT handover from the 3G network to the 2G
network is performed in the relocation process. When the switch is not on,
the PS inter-RAT handover from the 3G network to the 2G network is
performed in the cell change order process.
10) HO_INTER_RAT_PS_OUT_SWITCH: When the switch is on, the
RNC is allowed to initiate inter-frequency measure control and the PS inter-
RAT hard handover from the 3G network to the 2G network.
11) HO_INTER_RAT_RNC_SERVICE_HO_SWITCH: When the switch is
on, the attributes of inter-RAT handover of the services are based on the
configuration of RNC parameters. When the switch is not on, the attributes
are set on the basis of the CN. If no information is provided by the CN, the
attributes are then based on the RNC parameters.
12) HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWITCH: When the
switch is on, the cells in the detected set from which the RNC receives
their valid event reports can be added to the active set. The cells allowed to
be added to the active set must be the neighboring cells of the cells in the
active set.
13) HO_INTRA_FREQ_DETSET_RPRT_SWITCH: When the switch is
on, statistics on the intra-frequency measurement reports of the detected set
are taken.
14) HO_INTRA_FREQ_HARD_HO_SWITCH: When the switch is on, the
RNC is allowed to initiate the intra-frequency hard handover. The RNC
initiates the intra-frequency hard handover in the following cases.
15) HO_INTRA_FREQ_RPRT_1J_SWITCH: When the switch is on, the Bit Field Type
Threshold of signal quality of the target frequency for triggering inter-
frequency(Ec/No) measurement.
If the mode is set to event mode, this parameter is used to set measurement
control on the event 2C.
If the mode is set to periodical mode, this parameter is used to estimate the
periodical reports and only if quality of the target frequency is beyond the
threshold, the DRD procedure is triggered. Interval Type
Threshold of signal quality of the target frequency for triggering inter-
frequency(RSCP) measurement.
If the mode is set to event mode, this parameter is used to set measurement
control on the event 2C.
If the mode is set to periodical mode, this parameter is used to estimate the
periodical reports and only if quality of the target frequency is beyond the
threshold, the DRD procedure is triggered. Interval Type
A timer to RNC wait for the response to the TrCH reconfiguration or RB
reconfiguration response from UE in hard handover procedure. Interval Type
This parameter specifies the number of the optical port corresponding to
the high-end port. Interval Type
The cell will shut down automatically only when the HSDPA user number
is not greater than the threshold. Interval Type
This parameter specifies the first MAC-d PDU size on the HS-DSCH. For
BE services, the size of MAC-d PDUs is usually set to a large value. For
streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the second MAC-d PDU size on the HS-DSCH.
For BE services, the size of MAC-d PDUs is usually set to a large value.
For streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the third MAC-d PDU size on the HS-DSCH. For
BE services, the size of MAC-d PDUs is usually set to a large value. For
streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the fourth MAC-d PDU size on the HS-DSCH.
For BE services, the size of MAC-d PDUs is usually set to a large value.
For streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the fifth MAC-d PDU size on the HS-DSCH. For
BE services, the size of MAC-d PDUs is usually set to a large value. For
streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the sixth MAC-d PDU size on the HS-DSCH. For
BE services, the size of MAC-d PDUs is usually set to a large value. For
streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the seventh MAC-d PDU size on the HS-DSCH.
For BE services, the size of MAC-d PDUs is usually set to a large value.
For streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the eighth MAC-d PDU size on the HS-DSCH.
For BE services, the size of MAC-d PDUs is usually set to a large value.
For streaming services, the size remains the same value as that on the DCH.
The size must be a multiple of 8 bits. Interval Type
This parameter specifies the difference between the total HSPA power and
the maximum transmission power of a cell. The maximum value of HSPA
dynamical power can be adjusted to the total amount of HSPA power. If the
parameter value is set too low, the total HSPA power will be too low, thus
impacting the throughput of HSDPA subscribers at the border of a cell. For
details about this parameter, refer to 3GPP TS 25.308. Interval Type
Threshold of all the HSUPA user PBR whose schedule priority is the same
as that of users to be admitted. If this value is too high, the possibility of
rejecting HSUPA schedule services increases, which impacts access success
rate. If the value is too low, too many HSUPA schedule users may be
admitted, which impacts the admitted users and results in overload and
system congestion. Interval Type
Threshold of all the HSUPA user PBR whose schedule priority is higher
than that of users to be admitted. If this value is too high, the possibility of
rejecting HSUPA schedule services increases, which impacts access success
rate. If the value is too low, too many HSUPA schedule users may be
admitted, which impacts the admitted users and results in overload and
system congestionRecommended. Interval Type
HSUPA BE traffic Initial bit rate. When DCCC algorithm switch and
HSUPA DCCC algorithm switch are enabled, the uplink initial bit rate will
be set to this value if the uplink max bit rate is higher than the initial bit
rate. Enumeration Type
Threshold of all the HSUPA user PBR whose schedule priority is lower
than that of users to be admitted. If this value is too high, the possibility of
rejecting HSUPA schedule services increases, which impacts access success
rate. If the value is too low, too many HSUPA schedule users may be
admitted, which impacts the admitted users and results in overload and
system congestion. Interval Type
Length of smoothing filter window of HSUPA bit rate. Interval Type
The minimum number of HSUPA serive setup attempt Per Spu, the sum of
HSUPA service setup attempt need to be higher than this threshold to arise
KPI alarm which type is HSUPA service successful setup ratio. Interval Type
Successful HSUPA service setup ratio Per Spu, if the ratio is lower than
this threshold in a checking period, need arise KPI alarm. Interval Type
The cell will shut down automatically only when the HSUPA user number
is not greater than the threshold. Interval Type
This parameter specifies the VCI of the high-end VCL. Interval Type
This parameter specifies the VPI of the high-end VPL/VCL. If the VPL is
cross connected, VPI cannot be 0. Interval Type
This parameter specifies the hysteresis value for event 1A. The value of
this parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. Event 1A is a key
event that adds a cell to the active set. To ensure timely handover, the
hysteresis of event 1A should be set a little smaller than those of events 1B,
1F, 1C, and 1D. But the difference should not be too large, otherwise the
soft handover ratio can be affected. In addition, this parameter is related to
filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
This parameter specifies the hysteresis value for event 1B. The value of
this parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. In addition, this
parameter is related to filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
This parameter specifies the hysteresis value for event 1C. The value of
this parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. In addition, this
parameter is related to filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
This parameter specifies the hysteresis value for event 1D. The value of
this parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. In addition, this
parameter is related to filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
This parameter specifies the hysteresis value for event 1F. The value of this
parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. In addition, this
parameter is related to filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
This parameter specifies the hysteresis value for event 1J. The value of this
parameter correlates with slow fading. The larger the value of this
parameter, the less possibility of ping-pong effect or wrong decision. But
the event might not be triggered in time. For the definition, refer to 3GPP
TS 25.331.
The value of this parameter is ranged from 2 dB to 5 dB. In addition, this
parameter is related to filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the hysteresis means
decrease of the SHO area. But for the UE that leaves the SHO area, that
means enlarging of the SHO area. If the number of UEs entering the area
and the number of UEs leaving the area are equal, the real SHO ratio will
not be affected. The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the ping-pong effect can be
resisted, but the varying of the signal in response to the handover algorithm
becomes slower.
Interval Type
Hysteresis value for the event 2B.
The value of this parameter correlates with slow fading. The larger the
value of this parameter, the stronger the capability of resisting signal
fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the
handover algorithm to respond to signal change becomes lower, and
therefore event 2B might not be triggered in time. Interval Type
Interval Type
Hysteresis value for the event 2D.
The value of this parameter correlates with slow fading. The larger the
value of this parameter, the smaller probability of ping-pong effect or
wrong decision, but event 2D might not be triggered in time.
In periodical report mode, this parameter is used to resist the ping-pong
effect of event 2D (the quality of the currently used frequency is lower than
the threshold) and event 2F (the estimated quality of the currently used
frequency is higher than the threshold). Event 2D is used to enable the
compressed mode and event 2F is used to disable the compressed mode.
Therefore, Hystfor2D can be increased on the basis of recommended value
and inter-frequency handover ping-pong effect statistics. Hystfor2F can also
be increased to reduce frequent enabling or disabling of compressed mode
and to avoid unnecessary updates of the active set.
To set the values of the parameters, you should consider the following
factors: radio environment (with slow fading characteristic), actual
handover distance, and moving speed of the UE. The value range of this
parameter can be 2 dB to 5 dB. In addition, this parameter is related to filter
coefficient and trigger delay.
Interval Type
Interval Type
After a connection is established successfully, the timer is started. If the
timer does not receive the detection message when the timer expires, the
connection will be released. Interval Type
After a connection is established successfully, the timer is started. When
the timer expires, a detection message will be sent to the peer end. Interval Type
The ICMP Packet length include the IP header length. Interval Type
This parameter specifies the ID of the scheduled task to be started. Interval Type
Indicating whether the UE in idle mode is allowed to access the cell. When
the cell status is BARRED, it indicates that the UEs in idle mode are barred
to select/reselect the cell even in the case of emergency calls. For detailed
information of this parameter, refer to 3GPP TS 25.331. Enumeration Type
The hysteresis value of the serving FDD cells in idle mode in case the
quality measurement for cell selection and reselection is set to CPICH
RSCP. It is related to the slow fading feature of the area where the cell is
located. The greater the slow fading variance is, the greater this parameter.
According to the R regulation, the current serving cell involves in cell
selection after the measurement value is added with the hysteresis value.
The measurement hysteresis aims to prevent the ping-pong effect of the cell
reselection, which is caused by the slow fading when the UE is on the edge
of the cell. The ping-pong effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates (CELL_FACH,
CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading as well as ensuring
timely cell updates of the UE. According to the CPICH RSCP emulation
report of inter-frequency hard handovers, the measurement hysteresis
ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow
fading variance is 8 dB and the relative distance is 20 m. In the cells where
the slow fading variance is low and the average moving speed of UEs is
high, for example the suburbs and countryside, reduce the measurement
hysteresis to guarantee timely location updates of UEs. The higher the
measurement hysteresis is, the less likely it is for various types of cell
reselections to occur, and the better the slow fading resistance capability is,
but the slower the system reacts to the environment changes. For detailed
information of this parameter, refer to 3GPP TS 25.304.
Interval Type
The hysteresis value of the serving FDD cells in idle mode in case the
quality measurement for cell selection and reselection is set to CPICH
Ec/No. It is related to the slow fading feature of the area where the cell is
located. The greater the slow fading variance is, the greater this parameter.
It is optional. If it is not configured, [Hysteresis 1] will be adopted as the
value. This parameter is not configured when its value is 255.
According to the R regulation, the current serving cell involves in cell
selection after the measurement value is added with the hysteresis value.
The measurement hysteresis aims to prevent the ping-pong effect of the cell
reselection, which is caused by the slow fading when the UE is on the edge
of the cell. The ping-pong effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates (CELL_FACH,
CELL_PCH), and thus increase the load of network signaling and the
consumption of UE batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading as well as ensuring
timely cell updates of the UE. According to the CPICH RSCP emulation
report of inter-frequency hard handovers, the measurement hysteresis
ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow
fading variance is 8 dB and the relative distance is 20 m. In the cells where
the slow fading variance is low and the average moving speed of UEs is
high, for example the suburbs and countryside, reduce the measurement
hysteresis to guarantee timely location updates of UEs. The higher the
measurement hysteresis is, the less likely it is for various types of cell
reselections to occur, and the better the slow fading resistance capability is,
but the slower the system reacts to the environment changes. For detailed
information of this parameter, refer to 3GPP TS 25.304.
Interval Type
This parameter is valid when [Cell barred indicator for SIB3] is BARRED.
It indicates that the delay of the cell can be measured next time when [Cell
barred indicator for SIB4] is set to BARRED. The greater the value, the
lower the frequency of the UE trying to read the cell bar status. The smaller
the value, the higher the frequency of the UE trying to read the cell bar
status. For detailed information, refer to 3GPP TS 25.331. Enumeration Type
Interval for sending the POLL message when no data is transmitted. Interval Type
After the coverage based handover succeeds, to avoid the handover of the
UE to another frequency due to the following factors: overload, speed
estimation, MBMS channel reselection, and QoS, frequent handovers occur.
The RNC will start the inter-frequency non-coverage based anti-ping-pong
timer and prohibit the handover or measurement caused by the previous
factors before the timeout of the timer. The larger this parameter, the better
effect the anti-frequent handover. This, however, will affect the
management policy of the cell or the quality of service felt by the users; the
smaller this parameter, the more frequent the inter-frequency handover. Interval Type
CN flow control timer (short). The OVERLOAD message received
repeatedly in this period will be discarded. Interval Type
This parameter specifies the inhibit type (Physical inhibit, Logic inhibit). Enumeration Type
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
Interval Type
Threshold to stop inter-frequency measurement with measurement quantity
of RSCP for CS domain services.
The inter-frequency measurement stop RSCP threshold (namely,
compressed mode stop threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: the moving speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the measurement quantity
for inter-frequency measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency measurement, if the UE reports
event 2F when the measured value is larger than the value of this parameter.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
When the signals at the entrance to an elevator or a subway change too fast
to perform handover, you should start the compressed mode earlier and set
this parameter optimally to -85 dBm.
Interval Type
Enumeration Type
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
Interval Type
Threshold to stop inter-frequency measurement with measurement quantity
of RSCP for PS domain HSPA services.
The inter-frequency measurement stop RSCP threshold (namely,
compressed mode stop threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: the moving speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the measurement quantity for
inter-frequency measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency measurement, if the UE reports
event 2F when the measured value is larger than the value of this parameter.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
When the signals at the entrance to an elevator or a subway change too fast
to perform handover, you should start the compressed mode earlier and set
this parameter optimally to -85 dBm.
Interval Type
Interval Type
When it is checked, system supports inter-frequency neighboring detect
function. Enumeration Type
Threshold of signal quality of the target frequency for triggering inter-
frequency measurement.
This parameter is used to set measurement control on the event 2C.
The event 2C is triggered when the signal quality of the target frequency is
above this threshold. Interval Type
Threshold to trigger inter-frequency measurement with measurement
quantity of Ec/No for PS domain non-HSPA services.
The inter-frequency measurement start Ec/No threshold (namely,
compressed mode start threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the measurement quantity
for inter-frequency measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency measurement, if the UE
reports event 2D when the measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is recommended that this
parameter be set to -17 dB; for the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for the UE moving at the
speed of 120 km/h, it is recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various speeds, this parameter
should be set to -14 dB. Through emulation, the call drop rate remains low
for the UEs moving at the speed of 120 km/h when this parameter is set to
-14 dB.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
Interval Type
quantity of RSCP for PS domain non-HSPA services.
The inter-frequency measurement start RSCP threshold (namely,
compressed mode start threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: the moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the measurement quantity
for inter-frequency measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency measurement, if the UE
reports event 2D when the measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is recommended that this
parameter be set to -100 dBm; for the UE moving at the speed of 50 km/h,
it is recommended that this parameter be set to -97 dBm; for the UE
moving at the speed of 120 km/h, it is recommended that this parameter be
set to -93 dBm.
For the cell in which the UEs are moving at various speeds, this parameter
should be set to -95 dBm. Through emulation, the call drop rate remains
low for the UEs moving at the speed of 120 km/h when this parameter is set
to -95 dBm.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
When the signals at the entrance to an elevator or a subway change too fast
to perform handover, you should start the compressed mode earlier and set Interval Type
Threshold to stop inter-frequency measurement with measurement quantity
of Ec/No for PS domain non-HSPA services.
The inter-frequency measurement stop Ec/No threshold (namely,
compressed mode stop threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the measurement quantity
for inter-frequency measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency measurement, if the UE reports
event 2F when the measured value is larger than the value of this parameter.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
Interval Type
Threshold to stop inter-frequency measurement with measurement quantity
of RSCP for PS domain non-HSPA services.
The inter-frequency measurement stop RSCP threshold (namely,
compressed mode stop threshold) is one of the key parameters in the inter-
frequency handover policy. This parameter affects the proportion of the
UEs in compressed mode active status of a cell and the success rate of the
hard handover. To set this parameter, you need to consider the following
factors: the moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the measurement quantity
for inter-frequency measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency measurement, if the UE reports
event 2F when the measured value is larger than the value of this parameter.
If the cell is a macro cell, it means that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it means that the default value should be modified
according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
When the signals at the entrance to an elevator or a subway change too fast
to perform handover, you should start the compressed mode earlier and set
this parameter optimally to -85 dBm.
Interval Type
This parameter is the relative threshold of cell for judging whether uplink
MBDR algorithm of inter frequency is in overload state. It represents the
percentage of the cell admission control threshold of uplink. The smaller
this parameter is, the earlier uplink MBDR algorithm of inter frequency
goes into overload state. When cell load is higher than the product of uplink
cell admission control threshold and this parameter, and is lower than the
uplink cell admission control threshold, uplink MBDR algorithm of inter
frequency is in overload state. Interval Type
This parameter specifies whether inter-RAT handover of the UE among
different operators is allowed. Enumeration Type
This parameter specifies whether intra-RAT handover of the UE among
different operators is allowed. Enumeration Type
Interval Type
Interval Type
Interval Type
Inter-RAT ping-pong hysteresis.
When a UE in the CS domain is handed over from a 2G network to a 3G
network, the system increase 3A Hysteresis to prevent UE ping-pong
handover between the 2G network and the 3G network in the period
specified by this parameter. During the penalty time, the previous periodical
report will be changed to the event 3A report. If this parameter is 0,the
system will not start the ping-pong handover punish timer. Interval Type
Inter-RAT ping-pong timer.
When a UE in the CS domain is handed over from a 2G network to a 3G
network, the system increase 3A Hysteresis to prevent UE ping-pong
handover between the 2G network and the 3G network in the period
specified by this parameter. During the penalty time, the previous periodical
report will be changed to the event 3A report. If this parameter is 0,the
system will not start the ping-pong handover punish timer. Interval Type
RAT handover policy.
This parameter affects the proportion of the UEs in compressed mode
active status of a cell and the success rate of the hard handover. To set this
parameter, you need to consider the following factors: the speed of the UE
and the cell radius.
For PS domain non-HSDPA services, when Ec/No is used as the
measurement quantity for inter-RAT measurement, the RNC sends the
signaling to activate compressed mode and start inter-RAT measurement, if
the UE reports event 2D when the measured value is smaller than the value
of this parameter.
For the UE moving at the speed of 5 km/h, it is recommended that this
parameter be set to -17 dB; for the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for the UE moving at the
speed of 120 km/h, it is recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various speeds, this parameter
should be set to -14 dB. Through emulation, the call drop rate remains
lower for the UEs moving at the speed of 120 km/h when this parameter is
set to -14 dB.
If the cell is a macro cell, it indicates that micro cells exist in this cell. To
enable the traffic absorption function of the micro cells, the compressed
mode start threshold should be set higher and the stop threshold be set
lower, that is, the threshold for event 2D/2F be set higher by using CPICH
RSCP.
If the cell is a micro cell, it indicates that the default value should be
modified according to the link estimate result.
Events 2D and 2F are the compressed mode start and stop switches. When
the cell is located in the center of the frequency coverage or the inter-
frequency measurement quantity is set to BOTH, Ec/No serves as the
decision standard for events 2D and 2F. If you want to start the compressed
mode earlier, set the threshold for event 2D larger; if you want to reduce the
ping-pong effect of starting and stopping the compressed mode, set the
difference between events 2D and 2F larger.
Events 2D and 2F are the inter-RAT measurement start and stop switches,
that is, the inter-RAT compressed mode start and stop switches. Because
different service types may have different requirements on the signal
quality and different inter-RAT handover policies to be used, the inter-RAT
measurement start or stop thresholds are distinguished by CS, PS, and Interval Type
signaling services.
Interval Type
Threshold to stop inter-RAT measurement with measurement quantity of
RSCP for PS domain non-HSDPA services.
For PS domain non-HSDPA services, when RSCP is used as the
measurement quantity for inter-RAT measurement, the RNC sends the
signaling to deactivate compressed mode and stop inter-RAT measurement,
if the UE reports the event 2F when the measured value is larger than the
value of this parameter. Interval Type
-Event-triggered measurement report
To avoid the ping-pong effect before and after the inter-RAT handover,
event 3A where the currently used frequency quality is lower than the
absolute threshold and the signal level of the GSM cell is higher than
another absolute threshold is the triggering event that determines the inter-
RAT handover. To improve the handover success rate, the BSIC of the
GSM cell where the event 3A is triggered must be decoded correctly by the
UE. The reason is that event 3A cannot change from event-triggered mode
to periodical mode and cannot reattempt if the handover attempt fails,
unless this cell can trigger event 3A again.
The advantage of event-triggered report mode is that signaling transmission
is reduced and the load is shared. By comparing the signal quality between
the current frequency and inter-RAT frequency, the ping-pong effect in the
handover is prevented to some extent. The disadvantage of event-triggered
report mode is that the event is reported only once and cannot be changed
to periodical mode. If the handover fails, the periodical report is triggered
only by the internal timer. For the cell-oriented algorithm parameters, each
time the best cell is updated, the inter-frequency measurement parameters
should be updated accordingly.
This parameter is the relative threshold of cell for judging whether uplink
MBDR algorithm of inter RAT is in overload state. It represents the
percentage of the cell admission control threshold of uplink. The smaller
this parameter is, the earlier uplink MBDR algorithm of inter RAT goes into
overload state. When cell load is higher than the product of uplink cell
admission control threshold and this parameter, and is lower than the uplink
cell admission control threshold, uplink MBDR algorithm of inter RAT is in
overload state. Interval Type
This parameter specifies the interval for sending packets for starting the
EthOAM loopback test. Interval Type
This parameter specifies the Ec/No absolute threshold of event 1F in the
SHO algorithm, corresponding to the guarantee signal strength with QoS of
basic service. The parameter affects the triggering of event 1F.
Event 1F is used to trigger the emergency blind handover. If the best cell of
the active set reports event 1F, which means that the active cell is very poor
quality, then the blind handover is triggered as the last attempt before call
drop.
The emergency blind handover is a special occasion that requires on-site
measurements on the scope of the pilot strength of the best cell at the
location where the blind handover is triggered. Generally, this function
need not be started, so the parameter is set to the lowest value by default,
indicating that the blind handover is not triggered.
The larger the set value is, the more easily the event 1F can be triggered.
The smaller the set value is, the more difficultly the event 1F can be
triggered. For the definition of event 1F, refer to 3GPP TS 25.331.
As for the impact on network performance:
The higher the threshold is, the more easily the event 1F can be triggered.
The lower the threshold is, the more difficult the event 1F can be triggered.
In real situations, the threshold can be adjusted according to the handover
strategy and network coverage.
Interval Type
Interval Type
This parameter specifies the VP service relative threshold of event 1A. The
higher the threshold is, the more easily the event 1A is triggered. The lower
the threshold is, the harder the event 1A is triggered. For the definition of
event 1A, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of the UE involved in soft
handover (SHO ratio). So the threshold should be wisely chosen to achieve
smooth SHOs.
The value of this parameter determines the SHO area and SHO ratio. For
the CDMA system, the ratio of the UE involved in soft handover should
reach 30% to 40% to ensure smooth handover. Based on simulation results,
when the relative threshold is set to 5 dB, the ratio of the UE involved in
soft handover (the number of cells in the active set is at least 2) is
approximately 35%. It is recommended to set the relative threshold a little
higher (5 dB to 7 dB) during site deployment, and to reduce the threshold
when the users increase. But the threshold must be higher than 3 dB to
avoid the ping-pong handover.
In some specific applications, you can set different relative thresholds for
event 1A and event 1B to reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be curbed by adjusting
the hysteresis values for event 1A and event 1B, you can curb it by setting a
higher relative threshold for event 1B than that for event 1A. In general
applications, however, the relative thresholds for event 1A and 1B should
be equal, and you can curb the ping-pong effect through the time-to-trigger,
L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area and the SHO ratio.
The higher the threshold is, the more easily the target cell joins the active
set, the harder the call drops, the larger the ratio of the UE involved in soft
handover is, but the more the use of forward resources is. The lower the
threshold is, the more difficult the target cell joins the active set. Thus the
communication quality and the smooth handover cannot be guaranteed.
Interval Type
This parameter specifies the PS service relative threshold of event 1A. The
higher the threshold is, the more easily the event 1A is triggered. The lower
the threshold is, the harder the event 1A is triggered.
For the definition of event 1A, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of the UE involved in soft
handover (SHO ratio). So the threshold should be wisely chosen to achieve
smooth SHOs.
The value of this parameter determines the SHO area and SHO ratio. For
the CDMA system, the ratio of the UE involved in soft handover should
reach 30% to 40% to ensure smooth handover. Based on simulation results,
when the relative threshold is set to 5 dB, the ratio of the UE involved in
soft handover (the number of cells in the active set is at least 2) is
approximately 35%. It is recommended to set the relative threshold a little
higher (5 dB to 7 dB) during site deployment, and to reduce the threshold
when the users increase. But the threshold must be higher than 3 dB to
avoid the ping-pong handover.
In some specific applications, you can set different relative thresholds for
event 1A and event 1B to reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be curbed by adjusting
the hysteresis values for event 1A and event 1B, you can curb it by setting a
higher relative threshold for event 1B than that for event 1A. In general
applications, however, the relative thresholds for event 1A and 1B should
be equal, and you can curb the ping-pong effect through the time-to-trigger,
L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area and the SHO ratio.
The higher the threshold is, the more easily the target cell joins the active
set, the harder the call drops, the larger the ratio of the UE involved in soft
handover is, but the more the use of forward resources is. The lower the
threshold is, the more difficult the target cell joins the active set. Thus the
communication quality and the smooth handover cannot be guaranteed.
Interval Type
Relative threshold of the event 1B. The lower the value of this parameter
is, the more easily the event 1B is triggered. Interval Type
This parameter specifies the CS non-VP service relative threshold of event
1B. The lower the threshold is, the more easily the event 1B is triggered.
The higher the threshold is, the harder the event 1B is triggered.
For the definition of event 1B, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of the UE involved in soft
handover (SHO ratio). So the threshold should be wisely chosen to achieve
smooth SHOs.
The value of this parameter determines the SHO area and SHO ratio. For
the CDMA system, the ratio of the UE involved in soft handover should
reach 30% to 40% to ensure smooth handover. Based on simulation results,
when the relative threshold is set to 5 dB, the ratio of the UE involved in
soft handover (the number of cells in the active set is at least 2) is
approximately 35%. It is recommended to set the relative threshold a little
higher (5 dB to 7 dB) during site deployment, and to reduce the threshold
when the users increase. But the threshold must be higher than 3 dB to
avoid the ping-pong handover.
In some specific applications, you can set different relative thresholds for
event 1A and event 1B to reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be curbed by adjusting
the hysteresis values for event 1A and event 1B, you can curb it by setting a
higher relative threshold for event 1B than that for event 1A. In general
applications, however, the relative thresholds for event 1A and 1B should
be equal, and you can curb the ping-pong effect through the time-to-trigger,
L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area and the SHO ratio.
The higher the threshold is, the more easily the target cell joins the active
set, the harder the call drops, the larger the ratio of the UE involved in soft
handover is, but the more the use of forward resources is. The lower the
threshold is, the more difficult the target cell joins the active set. Thus the
communication quality and the smooth handover cannot be guaranteed.
Interval Type
This parameter specifies the PS service relative threshold of event 1B. The
lower the threshold is, the more easily the event 1B is triggered. The higher
the threshold is, the harder the event 1B is triggered.
For the definition of event 1B, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of the UE involved in soft
handover (SHO ratio). So the threshold should be wisely chosen to achieve
smooth SHOs.
The value of this parameter determines the SHO area and SHO ratio. For
the CDMA system, the ratio of the UE involved in soft handover should
reach 30% to 40% to ensure smooth handover. Based on simulation results,
when the relative threshold is set to 5 dB, the ratio of the UE involved in
soft handover (the number of cells in the active set is at least 2) is
approximately 35%. It is recommended to set the relative threshold a little
higher (5 dB to 7 dB) during site deployment, and to reduce the threshold
when the users increase. But the threshold must be higher than 3 dB to
avoid the ping-pong handover.
In some specific applications, you can set different relative thresholds for
event 1A and event 1B to reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be curbed by adjusting
the hysteresis values for event 1A and event 1B, you can curb it by setting a
higher relative threshold for event 1B than that for event 1A. In general
applications, however, the relative thresholds for event 1A and 1B should
be equal, and you can curb the ping-pong effect through the time-to-trigger,
L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area and the SHO ratio.
The higher the threshold is, the more easily the target cell joins the active
set, the harder the call drops, the larger the ratio of the UE involved in soft
handover is, but the more the use of forward resources is. The lower the
threshold is, the more difficult the target cell joins the active set. Thus the
communication quality and the smooth handover cannot be guaranteed.
Interval Type
This parameter specifies the PS service relative threshold of event 1B. The
lower the threshold is, the more easily the event 1B is triggered. The higher
the threshold is, the harder the event 1B is triggered.
For the definition of event 1B, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of the UE involved in soft
handover (SHO ratio). So the threshold should be wisely chosen to achieve
smooth SHOs.
The value of this parameter determines the SHO area and SHO ratio. For
the CDMA system, the ratio of the UE involved in soft handover should
reach 30% to 40% to ensure smooth handover. Based on simulation results,
when the relative threshold is set to 5 dB, the ratio of the UE involved in
soft handover (the number of cells in the active set is at least 2) is
approximately 35%. It is recommended to set the relative threshold a little
higher (5 dB to 7 dB) during site deployment, and to reduce the threshold
when the users increase. But the threshold must be higher than 3 dB to
avoid the ping-pong handover.
In some specific applications, you can set different relative thresholds for
event 1A and event 1B to reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be curbed by adjusting
the hysteresis values for event 1A and event 1B, you can curb it by setting a
higher relative threshold for event 1B than that for event 1A. In general
applications, however, the relative thresholds for event 1A and 1B should
be equal, and you can curb the ping-pong effect through the time-to-trigger,
L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area and the SHO ratio.
The higher the threshold is, the more easily the target cell joins the active
set, the harder the call drops, the larger the ratio of the UE involved in soft
handover is, but the more the use of forward resources is. The lower the
threshold is, the more difficult the target cell joins the active set. Thus the
communication quality and the smooth handover cannot be guaranteed.
Interval Type
CN flow control timer (long). If the OVERLOAD message is not received
in this period, the traffic volume will be increased by a degree. Interval Type
This parameter specifies the local IP address of an IPoA PVC. IP Address Type
This parameter specifies the local IP address of the Ethernet port. IP Address Type
This parameter specifies the next hop IP address. IP Address Type
Local IP address. It must be addresses configured on RNC (including
interface board's device IP and port IP) . IP Address Type
It specifies whether to enable the IP header compression function on the
PPP link. Enumeration Type
This parameter specifies whether to enable the IP head compression
function of a PPP link. Enumeration Type
This parameter specifies the index of the secondary IP address for the
Ethernet port. Interval Type
This parameter specifies whether to bind the logical port. Enumeration Type
This parameter specifies the logical port number the NodeB IP stack. Interval Type
Indicating whether the Iub interface supports IP hybrid transport. Enumeration Type
To determine whether the node is root node when Transport Type is ATM
or ATM_IP. Enumeration Type
When the Iu interface is faulty, the RNC gradually restricts cell access in
Bar mode. When the Iu interface is restored, the RNC gradually enables cell
access in Not Bar mode. This parameter defines the interval between the
cell working in Bar mode and in Not Bar mode. In this way, the location
update procedure can be distributed to a specified time period and the risk
due to congestion is reduced. Interval Type
Number of RABs selected in one DL traffic release. Interval Type
Number of RABs selected in one UL traffic release. Interval Type
A timer to Iu CS Release protection. Interval Type
A timer to Iu PS Release protection. Interval Type
Indicating whether to support congestion control over Iur interface of the
neighboring RNC. Enumeration Type
Indicating whether to config neighbouring RNC's DSP index. Enumeration Type
Indicating whether to support Hsdpa over Iur interface of the neighboring
RNC. Enumeration Type
Indicating whether to support Hsupa over Iur interface of the neighboring
RNC. Enumeration Type
Iu signaling connection identifier allocated by RNC for the user. Interval Type
Iu State Policy For RncPool. Enumeration Type
This parameter specifies the expected RX type of J0. The setting of the
expected RX byte must be consistent with that of the TX byte at the peer
end. Enumeration Type
This parameter specifies the expected RX value of J0. The setting of the
expected RX byte must be consistent with that of the TX byte at the peer
end. String Type
This parameter specifies the TX type of J0. The setting of the TX byte
must be consistent with that of the expected RX byte at the peer end. Enumeration Type
This parameter specifies the TX value of J0. The setting of the TX byte
must be consistent with that of the expected RX byte at the peer end. String Type
This parameter specifies the expected RX type of J1. The setting of the
expected RX byte must be consistent with that of the TX byte at the peer
end. Enumeration Type
This parameter specifies the expected RX value of J1. The setting of the
expected RX byte must be consistent with that of the TX byte at the peer
end. String Type
This parameter specifies the TX type of J1. The setting of the TX byte
must be consistent with that of the expected RX byte at the peer end. Enumeration Type
This parameter specifies the TX value of J1. The setting of the TX byte
must be consistent with that of the expected RX byte at the peer end. String Type
This parameter specifies the J2 TX type. The setting of the TX byte must
be consistent with that of the expected RX byte at the peer end. Enumeration Type
Timer of waiting for STAT response from the peer end. Interval Type
This parameter specifies whether the check is a key detect. If the check is a
key detect, the check result may affect the fault handling of the port.
Otherwise, the check result does not affect the fault handling of the port. Enumeration Type
The Period of KPI Alarm Check,it's the times of KPI report period. Enumeration Type
RRC Report KPI Alarm Switch. Enumeration Type
Identifying a location area code for a PLMN. It is defined by the operator.
For detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type
This parameter specifies the antenna latitude of the GPS reference receiver.
The latitude is expressed in the form of degree:minute:second. Interval Type
This parameter specifies the antenna latitude of the GPS reference receiver.
The latitude is expressed in the form of degree:minute:second. String Type
This parameter specifies the threshold of rate down delay. Interval Type
This parameter specifies the filter mantissa of average delay decrease. Interval Type
This parameter specifies the filter mantissa of average delay increase. Interval Type
This parameter specifies the type of link that carries the low-end VPL/VCL
cross connection. Enumeration Type
Length of smoothing filter window of intra-frequency load balancing
(LDB). Interval Type
This parameter specifies which choice the load balancing DRD algorithm
will be applied.
- Power: Power(Downlink none-HSDPA power is used for services carried
on DCH, and downlink HSDPA guarantee power is used for services
carried on HS-DSCH)will be applied to the load balancing DRD algorithm.
- UserNumber: User number(Downlink R99 equivalent user number is used
for services carried on DCH, and downlink HSDPA user number is used for
services carried on HS-DSCH)will be applied to the the load balancing
DRD algorithm.
Enumeration Type
This parameter specifies the downlink load threshold to trigger load
balancing DRD for services carried on DCH. The load balancing DRD will
probably be triggered only when the downlink cell remanent non H power
or remanent R99 equivalent user number is less than this threshold. Interval Type
This parameter specifies the threshold of remanent load offset between the
current cell and the target cell when load balancing DRD is applied for
DCH users. Only when the remanent load offset reaches this threshold can
a neighboring cell be selected as a candidate DRD cell for DCH users.(If
Load balance DRD choice is Power, additional condition should also be
statisfied, that is total power remain difference between the current cell and
target cell should be less than Load Balance DRD Total Power Protect
Threshold; if Load balance DRD choice is UserNumber, additional
condition is not needed.) Interval Type
This parameter specifies the threshold of remanent load offset between the
current cell and the target cell when load balancing DRD is applied for
HSDPA users. Only when the remanent load offset reaches this threshold
can a neighboring cell be selected as a candidate DRD cell for HSDPA
users.(If Load balance DRD choice is Power, additional condition should
also be statisfied, that is total power remain difference between the current
cell and target cell should be less than Load Balance DRD Total Power
Protect Threshold; if Load balance DRD choice is UserNumber, additional
condition is not needed.) Interval Type
This parameter specifies whether the load balancing DRD algorithm will
be applied for services carried on DCH.
- ON: The load balancing DRD algorithm will be applied.(If cell-level
DRD parameters are configured, the status of cell level Load balance DRD
switch for DCH should also be considered.)
- OFF: The load balancing DRD algorithm will not be applied. Enumeration Type
This parameter specifies whether the load balancing DRD algorithm will
be applied for services carried on HS-DSCH.
- ON: The load balancing DRD algorithm will be applied.(If cell-level
DRD parameters are configured, the status of cell level Load balance DRD
switch for HSDPA should also be considered.)
- OFF: The load balancing DRD algorithm will not be applied. Enumeration Type
This parameter specifies the threshold of the downlink remanent total
power difference between the current cell and the target cell when load
balancing DRD is applied and the load balancing DRD choice is Power.
Only when the downlink remanent total power difference is less than this
threshold can a neighboring cell be selected as a candidate DRD cell. Interval Type
Interval Type
If congestion is triggered by multiple resources such as credit and code at
the same time, the congestion of resources specified in this parameter is
processed with the second priority.
IUBLDR refers to processing of LDR action trigged by Iub bandwidth.
CREDITLDR refers to processing of LDR action trigged by credit.
CODELDR refers to processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu. Enumeration Type
If congestion is triggered by multiple resources such as credit and code at
the same time, the congestion of resources specified in this parameter is
processed with the third priority.
IUBLDR refers to processing of LDR action trigged by Iub bandwidth.
CREDITLDR refers to processing of LDR action trigged by credit.
CODELDR refers to processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu. Enumeration Type
Index of the load EQ used by the current adjacent node's bronze user. Interval Type
Index of the load EQ used by the current adjacent node's gold user. Interval Type
Index of the load EQ used by the current adjacent node's silver user. Interval Type
M3UA local entity indexes and M3UA local entity have a one-to-one
correspondence. Interval Type
This parameter specifies the status of the alarm mask switch. Enumeration Type
This parameter specifies the priority level of an MD. Interval Type
This parameter specifies the number of the Fractional link corresponding to
the low-end port. For the AEUa, the number ranges from 0 to 31. For the
AOUa in E1 transmission mode, the number ranges from 0 to 125. For the
AOUa in T1 transmission mode, the number ranges from 0 to 167. The
bearing Fractional link is configured. Interval Type
When the BE service rate of the UE decreases to the DCCC threshold rate,
the UE, however, cannot be changed to the FACH state because, for
example, the state transition switch is OFF or there are CS services. In this
case, when traffic remains low for quite a long period, the service rate
decreases to this rate and D2F state transition is not performed. The time
parameters and traffic volume measurement parameters for the function of
low activity rate adjustment are the same as those in the D2F state
transition process. Enumeration Type
This parameter specifies the lower limit of the alarm. String Type
Enumeration Type
This parameter specifies the number of an E1/T1 link. This parameter
specifies the number of a link. For the AEUa or PEUa, the value ranges
from 0 to 31. For the AOUa in E1 mode, the value ranges from 0 to 125; for
the AOUa in T1 mode, the value ranges from 0 to 167. For the POUa, the
value ranges from 0 to 167. Interval Type
Used for MTP3 link load sharing. Suppose that the number of 1s in the
value is expressed as n. Then the the maximum number of the MTP3 links
for load sharing is 2^n. For example, B0000 indicates that only one MTP3
link can be used for load sharing. B0001 and B1000 indicate that at most
two MTP3 links can be used for load sharing while the others cannot. This
mask AND the value of Signalling Route Mask specified by ADD N7DPC
must be zero. Enumeration Type
This parameter specifies the frame structure. The setting of this parameter
should be consistent with that at the peer end. Enumeration Type
This field indicate whether the SCTP link is bound with logic port. Enumeration Type
Slot No. of the logic port of the SCTP link. Interval Type
This parameter specifies the antenna longitude of the GPS reference
receiver. The longitude is expressed in the form of degree:minute:second. Interval Type
This parameter specifies the antenna longitude of the GPS reference
receiver. The latitude is expressed in the form of degree:minute:second. String Type
This parameter specifies the loopback type. Enumeration Type
This parameter specifies the number of periods that packet loss rate
adjustment suspends. Interval Type
This parameter specifies whether to select all the E1/T1 links carried on a
board, all the E1/T1 links carried on a port, or a single E1/T1 link. Enumeration Type
This parameter specifies the number of the slot in which the low-end port
carries the VPL/VCL cross connection. Interval Type
This parameter specifies the number of the subrack whose low-end port
carries the VPL/VCL cross connection. Interval Type
This parameter specifies the number of the UNI link corresponding to the
low-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa
in E1 transmission mode, the number ranges from 0 to 125. For the AOUa
in T1 transmission mode, the number ranges from 0 to 167. The bearing
UNI link is configured. Interval Type
This parameter specifies the VCI of the low-end VCL. Interval Type
This parameter specifies the VPI of the low-end VPL/VCL. For the VPL is
cross connected, VPI cannot be 0. Interval Type
This parameter specifies the number of the M3UA service listening port. Interval Type
This parameter defines the times of retransmission of paging messages. If
the times of retransmission exceeds the value of this parameter,
retransmission stops. For details, refer to the 3GPP TS 25.331 protocol. Interval Type
This parameter specifies the DTX cycle at the MAC layer when the MAC
layer supports UL EDCH inactivity. For details, refer to the 3GPP TS
25.331 protocol. Enumeration Type
This parameter specifies the period during which the EDCH is not
activated. After the EDCH is activated, data can be transmitted on the
EDCH within the period specified by MacDtxCycle. For details, refer to the
3GPP TS 25.331 protocol. Enumeration Type
This parameter specifies the maximum size of PDUs transmitted at the
MAC layer when the UE is in the CELL_FACH state in the L2 enhanced
scenario. Interval Type
This parameter specifies the maximum size of PDUs transmitted at the
MAC layer when the UE is in the CELL_DCH state in the L2 enhanced
scenario. Interval Type
This parameter specifies the maximum number of cells in the active set.
This parameter can achieve the balance between the signal quality in the
SHO area and the performance of the system. The more cells the active set
contains, the larger macro diversity gain the user obtains in the SHO area,
and the smaller the intra-frequency interference is. But in this case, the user
occupies resources of several cells, which increases the amount of data to
be processed by the system and lowers the system performance.
To reduce intra-frequency interference, it is recommended to suitably
increase the number of cells in the active sets for the hot-spot and micro
cells, which have highly complex signals. For the cell that provides high
speed services, suitably decreasing the number of cells in the active set can
reduce the consumption of system resources.
Interval Type
Max common channel priority supported by FACH. Enumeration Type
This parameter specifies the maximum value of Ec/NO in the E-FACH
Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y"
represents the actual value and "x" represents the GUI value). Interval Type
The offset between the FACH transmit power and PCPICH transmit power
in a cell.If MaxFachPower is excessively low, the UE at the cell verge fails
to receive correctly the services and signaling borne over the FACH,
resulting in the influence on the downlink common channel coverage and
the cell coverage. If MaxFachPower is excessively high, other channels are
interfered, the downlink power resources are occupied, and consequently
the cell capacity is influenced. Interval Type
The parameter value must be greater than or equal to the maximum length
of a sub-frame for PPP multiplexing (MAXSFLEN). This parameter can
also be associated with the maximum size of the MLPPP flake to control
whether the frames are fragmented after the multiplexing. In addition, to
enable PPP multiplexing, two or more sub-frames should be configured.
That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux
max mux-frame length" (MAXMFLEN) should satisfy the following
formula: MAXSFLEN<=(MAXMFLEN-8)/2. Interval Type
This parameter specifies the maximum number of channelization codes
supported by uplink DPDCH. The larger the value of this parameter, the
more the available channelization codes of uplink DPDCH. Interval Type
This parameter specifies the maximum length of the PPP sub-frame. If the
length of the PPP frame is greater than this parameter value, the frame
cannot be used for PPP multiplexing. Note that this parameter value should
not be greater than the maximum length of the PPP multiframe
(MAXMFLEN). In addition, to enable PPP multiplexing, two or more sub-
frames should be configured. That is, "PPP mux max son-frame length"
(MAXSFLEN) and "PPP mux max mux-frame length" (MAXMFLEN)
should satisfy the following formula: MAXSFLEN<=(MAXMFLEN-
8)/2. Interval Type
The parameter specifies the target value of the uplink load, which is
decreased through HSUPA power control on the NodeB side. If the
parameter value is set too low, the cell throughput will be too low. If the
parameter value is set too high, it will bring much interference. For details
about this parameter, refer to 3GPP TS 25.433. Interval Type
This parameter specifies the maximum duration for the single point
positioning. Interval Type
This parameter specifies the local IP address of the multi-hop BFD. IP Address Type
This parameter specifies the number of the slot where the command is
executed. Interval Type
This parameter specifies the number of the subrack where the command is
executed. Interval Type
A timer used to alarm for no mbms data check for MBMS traffic. Interval Type
ON denotes enabling of the MBMS Iub transmission resource sharing
function; OFF denotes disabling of the MBMS Iub transmission resource
sharing function. Enumeration Type
Mobile country code of the RNC. String Type
Mobile network code of the RNC. String Type
It is an indicator of MBMS neighboring cell. Enumeration Type
MBMS service release is an extreme method in reducing the cell load and
recovering the system when the cell is overloaded and congested.
The mechanism of the OLC is that an action is performed in each [OLC
period] and some services are selected based on the action rules to perform
this action. This parameter defines the maximum number of MBMS
services released in executing downlink OLC service release. Interval Type
Indicating whether MBMS is supported. Enumeration Type
This parameter specifies the uplink bit rate of the MBMS service in PTP
mode. The CN does not assign the uplink rate to the MBMS service, but the
MBMS service in PTP mode is in acknowledged mode and requires the
uplink rate for RLC status reporting. It is a waste of uplink resources if the
uplink bandwidth of an MBMS service in PTP mode is high. Therefore, it is
recommended the default value be used. Enumeration Type
This parameter specifies the transport mode of MBMS services. The point-
to-multipoint (PTM), point-to-point (PTP), and enhanced PTM
(ENHANCEDPTM) modes are static or semi-static transport modes. They
are relatively simple and have little impact on the MBMS service and the
network performance. The dynamic mode (DYNAMIC) is complicated. In
dynamic mode, transition between PTP and PTM modes is performed
dynamically to balance the quality of service and the network resource
utilization. The network periodically changes the transport mode based on
the number of users and the status of neighboring cells. These activities
have an impact on the reception of the MBMS service, and the MBMS user
might experience service disruption when the user moves across the border
between PTP cell and PTM cell. Therefore, the dynamic mode has a
relatively great impact on the MBMS service and the network performance.
For details of this parameter, refer to the 3GPP TS 25.346. Enumeration Type
This parameter specifies the coefficient of access period of the MCCH. Interval Type
This parameter specifies the priority of the MC. This parameter is valid
only when "MLPPP type" is set to MCPPP. Interval Type
This parameter specifies the minimum rate of ATM traffic. Physical unit:
cell/s or kbit/s. Interval Type
TX power of the MICH. The greater the power of the MICH, the higher of
the success ratio of the MBMS paging. However, more cell power resources
are occupied. For details about this parameter, refer to the 3GPP 25.433. Interval Type
The value indicates whether the MICH uses time and space TX diversity.
For detailed information of this parameter, refer to the 3GPP TS 25.433. Enumeration Type
This parameter specifies the HSDPA bit rate measurement report period.
For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type
This parameter specifies the minimum interval for receiving BFD packets
in millisecond. Interval Type
This parameter specifies the minimum interval for sending BFD packets in
millisecond. Interval Type
This parameter specifies the minimum spreading factor supported by
uplink DPDCH. The larger the value of this parameter, the fewer the
available spreading factors of uplink DPDCH. Enumeration Type
This parameter determines whether the RNC supports the MOCN function. Enumeration Type
This parameter specifies the configuration mode. Enumeration Type
This parameter specifies the backup mode of the MSP function. Enumeration Type
This parameter specifies the working mode of the system clock source. The
system clock source can work in manual mode or in auto mode. If the
parameter is set to MANUAL, you must specify the clock source for the
system. If the parameter is set to AUTO, the system automatically selects
the clock source against the clock switch policy. Enumeration Type
This parameter specifies the check mode. PRIMARY indicates the check
on a primary port. STANDBY indicates the check on a standby port.
INDEPENDENT indicates the check on an independent port. Enumeration Type
This parameter specifies the MP IP address for the DHCP server. IP Address Type
This parameter specifies the number of the MLPPP group. Interval Type
This switch specifies whether to add the MSCH logical channel on the
SCCPCH. When multi-MTCH logical channels are carried on one
SCCPCH, an MSCH logical channel should be added on the SCCPCH,
which is used to send scheduling control information of the data of MTCH. Enumeration Type
This parameter specifies whether to add the MSCH logical channel on the
SCCPCH. When one MTCH logical channel is carried on one SCCPCH, an
MSCH logical channel should be added on the SCCPCH, which is used to
send scheduling control information of the data of MTCH. Enumeration Type
Maximum code limit of all the MTCHs. This parameter is a limit to the
maximum bearing of the MBMS PTM bearing. When the code of all the
MTCHs are few, pre-emption of MBMS PTM bearing should be avoided.
This is because the MBMS PTM bearing serves multiple users at the same
time. The value should not be too high. Otherwise, all the system resources
may be consumed by the MBMS PTM bearing and too little capacity is left
for the non-MBMS services. Interval Type
This parameter specifies whether the metric system or the imperial system
is used. Enumeration Type
This parameter specifies the maximum time elapsed before the sub-frames
over the PPP link are multiplexed. Interval Type
This parameter specifies the discriminator of the check on the local end. Interval Type
Number of proving PDUs transmitted during the proving.Reference to
ITU-T Q2110. Interval Type
Maximum number of retransmissions of the RRC CONNECTION
REQUEST message. Interval Type
Maximum number of retransmissions of CELL UPDATE/URA
UPDATE.Protocol default value is 3. Interval Type
Maximum number of retransmissions of UE CAPABILITY
INFORMATION. Protocol default value is 2. Interval Type
Maximum number of retransmission of RRC CONNECTION RELEASE
COMPLETE. Interval Type
Upper limit of random access back-off delay. For details, refer to the 3GPP
TS 25.331 and 3GPP TS 25.214 protocols. Interval Type
Lower limit of random access back-off delay. For details, refer to the 3GPP
TS 25.331 and 3GPP TS 25.214 protocols. Interval Type
When call shock control starts, the AMR_RRC number can be accessed per
second for NodeB. Interval Type
This parameter specifies the number of the NBAP service listening port. Interval Type
This parameter specifies the OM address for NodeB ATM transport. IP Address Type
This parameter specifies the OM mask for NodeB ATM transport. IP Address Type
When call shock control starts, the register and 3G->2G reselect number
can be accessed per second for NodeB. Interval Type
This parameter specifies the OM address for NodeB IP transport. IP Address Type
This parameter specifies the OM mask for NodeB IP transport. IP Address Type
This parameter specifies the first ESN. String Type
The cell will shut down automatically only when the neighboring cell load
is less than the difference between the LDR threshold and this threshold. Interval Type
Interval Type
Indicating the network control mode. Enumeration Type
This parameter specifies the IP address of the next hop. IP Address Type
Threshold for deciding that the UE is in high-mobility state.
This parameter specifies a threshold for high-speed decision. After the UE
reports event 1D, the UE is considered in high-mobility state if the number
of changes of the best cell during [TFASTSPDEST] is larger than
[NFASTSPDEST]. The smaller the value is, the more possibly the UE is
decided in high-mobility state. Interval Type
Network Indicator. INT(international network), INTB(international
reserved), NAT(national network), NATB(national reserved). Enumeration Type
IUB_LDR (Iub congestion control algorithm): When the NodeB Iub load is
heavy, users are assembled in priority order among all the NodeBs and
some users are selected for LDR action (such as BE service rate reduction)
in order to reduce the NodeB Iub load.
NODEB_CREDIT_LDR (NodeB level credit congestion control
algorithm): When the NodeB level credit load is heavy, users are assembled
in priority order among all the NodeBs and some users are selected for
LDR action in order to reduce the NodeB level credit load.
LCG_CREDIT_LDR (Cell group level credit congestion control
algorithm): When the cell group level credit load is heavy, users are
assembled in priority order among all the NodeBs and some users are
selected for LDR action in order to reduce the cell group level credit load.
This parameter specifies the map mode between the optical port and the
DS1. Enumeration Type
This parameter specifies whether the IE is reported to the CN. Bit Field Type
This parameter specifies the type of the optical port. Enumeration Type
Azimuth of the semi-major axis of an uncertain area in the cell center (the
anticlockwise angle from the semi-major axis to the north). Interval Type
This parameter specifies the operation type of this command. One_touch
indicates that this command is executed on all boards in all subracks.
Step_by_Step indicates that this command is executed on the specified
patch of a board. Enumeration Type
Identifying an AAL2 path between two AAL2 nodes. For the same AAL2
path, the path IDs configured in the two AAL2 nodes must be the same and
cannot be 0. Interval Type
This parameter specifies the type of patch to be loaded to the DPUb board. Enumeration Type
Offset of the PCH transmit power from the PCPICH transmit power in a
cell. If the value is set too small, the UEs on the cell edge cannot receive
the paging message properly. This problem affects the coverage of the
downlink common channel and furthermore the coverage of the cell. If the
value is set too great, it causes interference to other channels, occupies the
downlink transmit power, and affects the cell capacity. For detailed
information of this parameter, refer to 3GPP TS 25.433. Interval Type
This parameter specifies the destination IP address of the IP loopback test. IP Address Type
First destination IP address. 0 indicates an invalid value. IP Address Type
Second destination IP address. 0 indicates an invalid value. IP Address Type
This parameter specifies the peer type of IPoA PVC. Enumeration Type
Interval Type
Strech for penalty of inter-RAT handover failure. No try of inter-RAT
handover to the penalty cell will be taken until penalty finishes. Interval Type
This parameter specifies the PHB to be activated with the IP PM. Bit Field Type
Difference between the transmit power of PICH and that of PCPICH. If the
value is set too small, the UEs on the cell edge cannot receive the paging
indication properly. This problem may cause a misoperation of reading the
PCH, waste the battery of the UE, affect the coverage of the downlink
common channel, and finally affect the cell coverage. If the value is too
great, it causes interference to other channels, occupies the downlink
transmit power, and affects the cell capacity. For details, refer to the 3GPP
TS 25.433 protocol. Interval Type
This parameter specifies the number of the slot that holds the PIU. Interval Type
This parameter specifies the number of packets for starting the EthOAM
loopback test. Interval Type
This parameter specifies the length of packet for starting the EthOAM
loopback test. Interval Type
This parameter specifies the maximum length of a loopback packet. Interval Type
This parameter specifies the size of the ping packets. Interval Type
This parameter specifies the size of a sent packet. Interval Type
This parameter specifies the interval for sending IP PM packets. Interval Type
The power offset between the last access preamble and the message control
part. The power of the message control part can be obtained by adding the
offset to the access preamble power. If the value is excessively low, the
uplink interference may increase, and the uplink capacity may be affected.
If the value is set too high, coverage may be affected. For detailed
information of this parameter, refer to 3GPP TS 25.213. Interval Type
This parameter specifies the PPP port IP address for the DHCP server. IP Address Type
This parameter specifies the number of a PPP link. Interval Type
If this parameter is set to Enable, the frame multiplexing over the PPP link
is enabled. If this parameter is set to Disable, the frame multiplexing over
the PPP link is disabled. Enumeration Type
This parameter is valid only when the port flow control type is IP. The
"PQNUM" of an ATM queue is "2" by default. You cannot change the
default value. Interval Type
Uniquely identifying a PRACH in a cell corresponding to the AICH. Interval Type
Priority of the signalling link. 0 indicates the highest priority. Interval Type
Enumeration Type
This parameter specifies the capability of the cells with a specific [Service
priority group Identity] for extension services, such as CMB and MBMS.
The value 0 means that these cells do not support extension services. The
value 1 indicates the highest priority whereas the value 7 indicates the
lowest. That is, extension services are preferably absorbed by this group of
cells. Interval Type
This parameter specifies the capability of the cells with a specific [Service
priority group Identity] for HSDPA services. The value 0 means that these
cells do not support HSDPA services. The value 1 indicates the highest
priority whereas the value 7 indicates the lowest. That is, HSDPA are
preferably absorbed by this group of cells. Interval Type
This parameter specifies the capability of the cells with a specific [Service
priority group Identity] for HSUPA services. The value 0 means that these
cells do not support HSUPA services. The value 1 indicates the highest
priority whereas the value 7 indicates the lowest. That is, HSUPA services
are preferably absorbed by this group of cells. Interval Type
This parameter specifies the capability of the cells with a specific [Service
priority group Identity] for R99 non-real-time services. The value 0 means
that these cells do not support R99 non-real-time services. The value 1
indicates the highest priority whereas the value 7 indicates the lowest. That
is, R99 non-real-time services are preferably absorbed by this group of
cells. Interval Type
This parameter specifies the capability of the cells with a specific [Service
priority group Identity] for R99 real-time services. The value 0 means that
these cells do not support R99 real-time services. The value 1 indicates the
highest priority whereas the value 7 indicates the lowest. That is, R99 real-
time services are preferably absorbed by this group of cells. Interval Type
This parameter specifies the processing duration of the cell blocking in the
RNC. Interval Type
terminal version R4 will debase to R99.
7)SYS_HO_OUT_CIPHER_SWITCH.When it is checked ,the RNC will
add ciphering byte at GSM HANDOVER COMMAND if the GSM system
do not add any cipher information at that message.
8)SYS_HO_CIPHER_CONFIG.When it is checked , the cipher
configuration in the added cipher byte in GSM will be A5/1.When it is no
checked ,the cipher configuration is A5/0.
9)BARRED_CELL_FOR_CSDOMAIN_RST.When it is checked, cell will
be bared when CS domain is invalid, otherwise the CS domain will be
bared when CS domain is invalid. It is invalid If
SYS_INFO_UPDATE_FOR_IU_RST is not checked.
10)CR2284R1_SWITCH.in section 8.6.6.28 of TS25.331 of R5 Before
2006, it describes that the HFN should add one when UE is ciphering in the
situation of Timing re-initialized hard handover,while not specified in RB
SETUP process in the section of 8.6.4.3. so it is not clear whether to add or
not in RB SETUP in DRD scenarios.
CR2284R1 clarify that HFN should add one in RB SETUP process with
Timing re-initialized hard handover.
when it is checked ,RNC accepts this CR2284R1;
when it is not checked ,RNC does not accept this CR2284R1.
11)CR2284R1_COMPATIBLE_SWITCH.CR2284R1 causes the
compatible problem.if UE is not consistent with RNC regarding whether
accept the CR2284R1 or not,it will cause the problem of streaming when
UEs are communicating with each other.So RNC creates this switch .
when it is checked, RNC is auto-adaptive to accept the CR2284R1
according to UE version information.
The principles that RNC judges UE whether to accept the CR2284R1
are as follows:
R5 and above UE accepts the CR;
R99/R4 UE ,if it receives the START LIST value from RB SETUP
COMPLETE,RNC figures that UE accepts the CR;
R99/R4 UE ,if it only receives the START value from RB SETUP
COMPLETE,RNC figures that UE does not accept the CR ;
when it is not checked, whether RNC accept the CR or not is according to
CR2284R1_SWITCH.
The relations between these two switches CR2284R1_SWITCH and
CR2284R1_COMPATIBLE_SWITCH are as follows: Bit Field Type
SS7 protocol type supported by the DSP.
ITUT: International Telecommunication Union - Telecommunication
Standardization Sector
ANSI: American National Standards Institute
TTC: THE TELECOMMUNICATION TECHNOLOGY COMMITTEE
(use for JAPAN). Enumeration Type
If the background Radio Access Bear timer T1 expired,the PDCP will send
RRC release request message to RRC layer and start timer T2,after sending
release request to RRC layer,if the Background Radio Access Bear haven't
been released until the Background service T2 timeout, the PDCP layer will
resend release request indication. Interval Type
If the Interactive Radio Access Bear timer T1 expired,the PDCP will send
RRC release request message to RRC layer and start timer T2,after sending
release request to RRC layer, if the Interactive Radio Access Bear haven't
been released until the Interactive service T2 timeout, the PDCP layer will
resend release request indication. Interval Type
If the Streaming Radio Access Bear timer T1 expired,the PDCP will send
RRC release request message to RRC layer and start timer T2,after sending
release request to RRC layer, if the Streaming Radio Access Bear haven't
been released until the Streaming service T2 timeout, the PDCP layer will
resend release request indication. Interval Type
Offset of the PSCH transmit power from the PCPICH transmit power in a
cell. If the value is excessively low, UEs at the edge of cells fail in network
searching, resulting in influence on coverage of the downlink common
channel. This finally affects the cell coverage. If the value is excessively
high, the power resources are wasted, and other channels are interfered
seriously, thus the cell capacity is influenced. Interval Type
R99 PS conversational service downlink factor. Interval Type
When detecting that the Ps' Background User had no data to transfer for a
long time which longer than this timer, the PDCP layer would request the
RRC layer to release this Radio Access Bear. Interval Type
When detecting that the Ps' Conversational User had no data to transfer for
a long time which longer than this timer, the PDCP layer would request the
RRC layer to release this Radio Access Bear. Interval Type
When detecting that the Ps' IMS signal had no data to transfer for a long
time which longer than this timer, the PDCP layer would request the RRC
layer to release this Radio Access Bear. Interval Type
When detecting that the Ps' Interactive User had no data to transfer for a
long time which longer than this timer, the PDCP layer would request the
RRC layer to release this Radio Access Bear. Interval Type
When detecting that the Ps' Streaming User had no data to transfer for a
long time which longer than this timer, the PDCP layer would request the
RRC layer to release this Radio Access Bear. Interval Type
Indicating whether the PS domain permits the CN information to update . Enumeration Type
This parameter specifies the IP address for the NodeB FE port. IP Address Type
This parameter specifies the subnet mask for the IP address of the NodeB
FE port. IP Address Type
This parameter specifies whether MBMS PTM streaming bearers can pre-
empt other MBMS PTM bearers and non-MBMS bearers. If this parameter
is set to ON, pre-emption is triggered when PTM streaming bearer
admission fails. That is, a lower-priority MBMS bearer or a non-MBMS
bearer is released. Thus, the ongoing service is disrupted and call drop even
occurs. Enumeration Type
This parameter specifies whether MBMS PTM streaming bearers can be
pre-empted by other MBMS PTM bearers or non-MBMS bearers. If this
parameter is set to ON, a PTM streaming bearer might be pre-empted by an
MBMS bearer of a higher priority or a non-MBMS bearer in the case of
congestion. Thus, the MBMS service is disrupted, which has a relatively
great impact because the PTM bearer serves more than one user. Enumeration Type
Length of smoothing filter window of potential user control (PUC). Interval Type
Identifying the potential user control period. When the cell load is high, the
cell selection and reselection can be periodically modified in order to
enable users in unconnected mode to select other cells more easily, thus
reducing the local cell load. Interval Type
This parameter specifies the coefficient of the penalty time after the PTP
RB admission fails. The penalty time is MCCH modification period
multiplied by this parameter. During the penalty time, users in the cell are
not allowed to initiate PTP RB requests. Interval Type
This parameter is used to inform the UE of the method for translating the
received Transmit Power Control (TPC) commands. In other words, it is
used to select UL power control algorithm. For details of this parameter,
refer to the 3GPP TS 25.214. Enumeration Type
Function set supported by the local RNC for the adjacent node The value
CS1 (or CS2) indicates that the local end connects to the adjacent node
through the CS1 (or CS2) version protocol. The CS2 version protocol is
backward compatible with the CS1 version protocol. Therefore, it is
recommended to use the default value CS2 except that the adjacent node is
not compatible with CS2 messages from the local end. Enumeration Type
Queue length. The total number of users in queue of each cell should not
exceed the value specified in this parameter. When a new user needs
queuing, 1) If the queue has vacancy, the user joins the queue immediately.
2) If the queue is full and there is a user whose queue time exceeds the
allowed maximum queue time, this user is out of the queue and access fails.
At the same time, the new user joins the queue. 3) If the queue has a user
whose priority is lower than that of the new user, the user in the queue with
the lowest priority is out of the queue and access fails. At the same time, the
new user joins the queue. 4)For other situations, the user cannot join the
queue. Interval Type
This parameter specifies the index number that identifies the configuration
of a typical RAB. Interval Type
The timer is started when the RNC initiates the RAB Modify procedure. If
RAB modify message is received from the CN when this timer is actived,
the rate information assigned by CN when establishing traffic will be
reserved as the new assigned rate is used. Interval Type
This parameter specifies the name of the rollback point. The target rollback
point must exist and must be subsequent to the current point. String Type
This parameter specifies the type of rollback point. LASTRBP indicates
the last rollback point, which can be set by the user or the calculated point
by the RNC. APPOINTRBP indicates the rollback point specified by the
user. Enumeration Type
A timer used to wait for the RB reconfiguration response from UE in the
RB procedure. Interval Type
A timer to RNC wait for the RB release response from UE in the RB
procedure. Interval Type
A timer to RNC wait for the RB setup response from UE in the RB
procedure. Interval Type
This parameter specifies the rate down coefficient of the logical port. Interval Type
This parameter specifies the interval between recounting operations. Interval Type
This parameter specifies the decrease rate alarm recover threshold. Interval Type
This parameter specifies whether to back up the board. Enumeration Type
When the UL load state or DL load state of the serving cell is LDR or
OLC, a UE may be redirected to another cell according to the traffic type.
This parameter specifies the possibility of redirecting the UE to another
cell. When this parameter is set to 0, the RRC redirection is not performed
if the load state on the serving cell is LDR or OLC. LDR indicates basic
congestion. OLC indicates overload congestion. Interval Type
When the load of the serving cell is within the normal range, a UE may be
redirected to another cell according to the traffic type. This parameter
specifies the possibility of redirecting the UE to another cell. When this
parameter is set to 0, the RRC redirection is not performed if the load of the
serving cell is within the normal range. Interval Type
This parameter specifies the target downlink UARFCN of a cell for RRC
redirection. Interval Type
287}
Band3:
Common frequencies: [937-1288]
Special frequencies: none
Band4:
Common frequencies: [1312-1513]
Special frequencies: {1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837,
1862}
Band5:
Common frequencies: [4132-4233]
Special frequencies: {782, 787, 807, 812, 837, 862}
Band6:
Common frequencies: [4162-4188]
Special frequencies: {812, 837}
Band7:
Common frequencies: [2012-2338]
Special frequencies: {2362, 2387, 2412, 2437, 2462, 2487, 2512, 2537,
2562, 2587, 2612, 2637, 2662, 2687}
Band8:
Common frequencies: [2712-2863]
Special frequencies: none
Band9:
Common frequencies: [8762-8912]
Special frequencies: none
BandIndNotUsed:
[0-16383]
Assume that the target uplink UARFCN for RRC redirection is unspecified,
the band indication is Band1, Band2, Band3, Band4, Band5, Band6, Band7,
Band8, or Band9, and the target downlink UARFCN for RRC redirection is
valid. Then, the default target uplink UARFCN for RRC redirection is as
follows:
- If the DL frequency belongs to common frequencies, then
Band1: Uplink UARFCN = Downlink UARFCN - 950
Band2: Uplink UARFCN = Downlink UARFCN - 400
Band3: Uplink UARFCN = Downlink UARFCN - 225
Band4: Uplink UARFCN = Downlink UARFCN - 225
Band5: Uplink UARFCN = Downlink UARFCN - 225 Interval Type
Band6: Uplink UARFCN = Downlink UARFCN - 225
Enumeration Type
This parameter specifies the link No. of the clock source of the output
clock. Interval Type
This parameter specifies the backup link No. of the clock source of the
output clock. Interval Type
This parameter specified the output switch of 2 MHz output clock 1. Enumeration Type
This parameter specified the output switch of 2 MHz output clock 2. Enumeration Type
Indicates whether register beared by fach under call shock control. This
function only applies under NodeB level or cell level call shock control. Enumeration Type
This parameter specifies re-host policy type for NodeB. The value
"REHOSTRIGHTNOW" indicates to perform re-host policy for the NodeB
immediately when the RNC recovers from disaster. The value
"REHOSTDELAY" indicates to perform re-host policy for the NodeB after
a specified delayed period when the RNC recovers from disaster. The value
"REHOSTWHEN" indicates to perform re-host policy for the NodeB at a
specific time. Enumeration Type
This timer is started when an AAL2 signaling entity sends the service user
an indication for releasing an AAL2 connection. Interval Type
A timer to RNC wait for another relocation request in relocation procedure. Interval Type
A timer to RNC wait for the relocation command message in relocation
procedure. Interval Type
A timer to RNC wait for rnsap relocation commit message in relocation
procedure. Interval Type
A timer used for data forwarding in relocation procedure. Interval Type
A timer to RNC wait for Iu release command in the failed relocation
procedure. Interval Type
A timer to RNC wait for the Iu release command message in relocation
procedure. Interval Type
A timer to RNC wait for mobile information confirmation in relocation
procedure. Interval Type
A timer to RNC wait for the response to physical channel reconfiguration
in relocation procedure. Interval Type
A timer to RNC wait for inter-RAT handover completion in relocation
procedure. Interval Type
This timer is started when an AAL2 signaling entity sends the peer node a
request for releasing an AAL2 connection. Interval Type
This parameter specifies the threshold of immediate rate reduction after the
soft handover failure. The rate reduction of the active set and the SHO retry
procedure can be triggered without the intra-frequency reporting event
reported, when the quality of the cell in the active set fulfills the following
conditions.
The formula of direct SHO rate reduction is
new > Mbest_cell - RelThdForDwnGrd
where
Mnew: the CPICH Ec/No measurement value of the failed cell1
Mbest_cell: the CPICH Ec/No measurement value in the latest
measurement report of the best cell identified by the RNC according to 1D
RelThdForDwnGrd: the relative threshold for direct rate reduction. It can
be configured on the BAM server.
Note: The smaller the value of this parameter, the harder it is to trigger
SHO rate reduction, but the greater intra-frequency interference caused by
the cell that does not join the active set, the greater possibility of call drops.
On the contrary, the larger the value of this parameter, the easier it is to
trigger SHO rate reduction which ensures the signal quality. But, frequent
triggering of SHO rate reduction may affect the use of the services.
Interval Type
This parameter specifies the reporting period of event 1A. That is, event
1A is reported at each reporting interval. Usually, event 1A is reported only
once. Nevertheless, if the cell, where event 1A is reported, does not join the
active set in a specified period of time, the UE can change the reporting of
event 1A into periodical mode.to avoid missing of measurement reports.
The event 1A of this cell is reported for [PeriodMRReportNumfor1A] times
with the reporting interval as the set value. Enumeration Type
This parameter specifies the time length to restart the timer for the PPP
link. Interval Type
Specifies the mode of restricting the access classes. Enumeration Type
This field indicate whether the AAL2PATH is belong to resource group. Enumeration Type
Number of the resource group that the AAL2PATH belongs to. Interval Type
Number of the resource group that the IP Path belongs to. Interval Type
Indicating the resource management mode. Enumeration Type
Pending time after the traffic volume event 4B is reported. This parameter
is used to prevent too many traffic volume events 4B being reported. Enumeration Type
This parameter is used to check whether the UE in the low activity state. If
the UE is on DCH or HSPA channel, the low activity counter increases by 1
every time traffic volume event 4B is reported. Enumeration Type
When the traffic volume is below the 4B threshold and remains so for the
period specified by this parameter, the event 4B is reported. This parameter
prevents unnecessary traffic volume events that are caused by traffic
volume instability from being triggered. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of real-time services from E_FACH to HSPA with
CPC technology. If the value of this parameter is too high, congestion may
occur over the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of real-time services from E_FACH to HSPA with CPC
technology. This parameter prevents unnecessary reports that are caused by
traffic volume instability from being triggered. If the value of this
parameter is too high, the period of reporting 4A event is delayed and
congestion may occur over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of real-time services from E_FACH to DCH or
HSPA. If the value of this parameter is too high, congestion may occur over
the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of real-time services from E_FACH to DCH or HSPA. This
parameter prevents unnecessary reports that are caused by traffic volume
instability from being triggered. If the value of this parameter is too high,
the period of reporting 4A event is delayed and congestion may occur over
the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of real-time services from FACH to HSPA with
CPC technology. If the value of this parameter is too high, congestion may
occur over the common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of real-time services from FACH to HSPA with CPC technology.
This parameter prevents unnecessary reports that are caused by traffic
volume instability from being triggered. If the value of this parameter is too
high, the period of reporting 4A event is delayed and congestion may occur
over the common channel. Enumeration Type
This parameter specifies the threshold of the traffic volume of 4A event for
triggering the transition of real-time services from FACH to DCH or HSPA.
If the value of this parameter is too high, congestion may occur over the
common channel. Enumeration Type
This parameter specifies the occurrence time of 4A event for triggering the
transition of real-time services from FACH to DCH or HSPA. This
parameter prevents unnecessary reports that are caused by traffic volume
instability from being triggered. If the value of this parameter is too high,
the period of reporting 4A event is delayed and congestion may occur over
the common channel. Enumeration Type
It is used to calculate the round-trip time of the protocol stack and the RTO
value. The [RTO alpha value] must be less than the [RTO beta value].
When [RTO beta value] is a constant, the larger this parameter is set, the
less sensitive it becomes to the link delay. Interval Type
It is used to calculate the round-trip time of the protocol stack and the RTO
value. The [RTO beta value] must be greater than the [RTO alpha value].
When [RTO alpha value] is a constant, the larger this parameter is set, the
more sensitive it becomes to the link delay. Interval Type
When [RTO max value] and [RTO max value] are constants, the larger this
parameter is set, the longer the time spent in checking if the link works
well. Interval Type
When [RTO max value] is a constant, the larger this parameter is set, the
longer the time spent in checking if the link works well. Interval Type
When [RTO max value] is a constant, the larger this parameter is set, the
longer the time spent in checking if the link works well. Interval Type
Route index, a logical number of the route. Interval Type
This parameter specifies the rate up step of the logical port. Interval Type
This parameter specifies the period of adjusting the rate up step. Interval Type
This parameter specifies the backward bandwidth of the logical port. Interval Type
Backward bandwidth of the IP path. Interval Type
This parameter is valid only when Transport Resource Group Type is ATM
or Transport Resource Group Type is IP and Bandwidth Mode is
FULL_DUPLEX. Interval Type
Receive traffic record index of the SAAL link. Interval Type
When the time difference between the time when the UE receives a
physical frame from the downlink and the time when the UE transmits the
physical frame to the uplink becomes greater than a certain threshold, the
event 6F will be triggered.
This parameter is to optimize the power control performance within a time
slot, that is, to guarantee that the power control within a time slot is
implemented based on all links in the active set. The ideal UE Rx-Tx time
difference should be 1024 chips.
This parameter should not be too close to 1024. Otherwise, the radio link
may be removed prematurely.
It is recommended that the parameter be set within the range 1024~1280.
For the definition and its related details, refer to the 3GPP TS 25.331
protocol.
Interval Type
When the time difference between the time when the UE receives a
physical frame from the downlink and the time when the UE transmits the
physical frame to the uplink becomes smaller than a certain threshold, the
event 6G will be triggered. This parameter is to optimize the power control
performance within a time slot, that is, to guarantee that the power control
within a time slot is implemented based on all links in the active set. The
ideal UE Rx-Tx time difference should be 1024 chips. This parameter
should not be too close to 1024. Otherwise, the radio link may be removed
prematurely. It is recommended that the parameter be set within the range
768~1024. For the definition and its related details, refer to the 3GPP TS
25.331 protocol. Interval Type
No. of the SAAL link that bears the CCP.For detailed information of this
parameter, refer to 3GPP TS 25.430. Interval Type
No. of the SAAL link.For detailed information of this parameter, refer to
3GPP TS 25.430. Interval Type
This parameter specifies the number of an SAAL link carried on the VCL. Interval Type
Number of the SAAL link bearing the AAL2 signaling to the adjacent
node. Interval Type
Interface type of the SAAL link.The interface type of links on Iub is UNI.
The interface type of links on Iu and Iur is NNI. Enumeration Type
SAAL link connection timer. It is a protection timer waiting for a SAAL
response after a link setup request is sent to SAAL. Interval Type
PLMN-Id, LAC and SAC together compose the Service Area ID (SAI).
The SAI is used to define an area composed of one or more cells in the
same location area. This area is called service area, which indicates the
location of a UE to the CN. This parameter is defined by the operator. For
detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type
Indicating whether the Iub interface supports satellite transmission. Enumeration Type
Timing offset between the SCCPCH and PCCPCH in the cell. As defined
by the 25.211 protocol, the PICH timing is 7680 chips prior to its
corresponding SCCPCH frame timing. If the offset of the SCCPCH timing
from the PCCPCH timing is smaller than 30 (x 256 chips), the
corresponding CFN decreases by 1. Then, the difference between the PICH
CFN and the corresponding SCCPCH CFN is 2. However, in the 25.435
protocol, the PI information and paging message are transmitted with two
consecutive CFNs. In the RNC, the PI information and paging messages are
also transmitted with two consecutive CFNs irrespective of the chip offset.
Therefore, the two protocols conflict with each other in this aspect. To
avoid the compatibility problem, it is recommended that the SCCPCH
timing carrying the PCH transport channel be set to between 31 and 149.
For detailed information of this parameter, refer to 3GPP TS 25.433 and
3GPP TS 25.211.
0 : 0chip,
1: 256chip,
2: 512chips,
...,
149 : 38144chips.
Interval Type
List Type. Enumeration Type
This parameter specifies the average rate. Physical unit: cell/s or kbit/s. Interval Type
This parameter specifies the start date of the DST. Interval Type
This parameter specifies whether the SD is enabled. Enumeration Type
This parameter specifies the priority of the SF event and the SD event. Enumeration Type
Seed of the pseudo-random sequence generator. It can prevent idle period
of different NodeBs from overlapping. Interval Type
This parameter specifies the type of the NodeB detect. Enumeration Type
This parameter indicates whether the MBMS service is released first or
user first when the overload occurs. Enumeration Type
This parameter specifies the IP address to be accessed by the FTP client. IP Address Type
This parameter specifies the server name for CHAP authentication during
PPP or MLPPP link negotiation. String Type
This parameter specifies the rate of the MBMS service carried on the
common channel. For details of this parameter, refer to the 3GPP TS
25.346. Enumeration Type
This parameter specifies whether the service differential DRD algorithm
will be applied.
- ON: The service differential DRD algorithm will be applied.(If cell-level
DRD parameters are configured, the status of cell level Service differential
drd switch should also be considered.)
- OFF: The service differential DRD algorithm will not be applied. Enumeration Type
Uniquely identifying a MBMS service in the PLMN. Interval Type
Indicating whether to support CS, PS or both domains. Enumeration Type
This parameter specifies the traffic class of the MBMS service carried on
the common channel. For details of this parameter, refer to the 3GPP TS
25.346. Enumeration Type
This parameter is valid only when Adjacent Node Type is IUPS.NO means
the node is GGSN, and GGSN need not to configure dpx parameter. Enumeration Type
Numbers of incoming calls to be shared when the load exceeds the
forwarding threshold. When the CPU usage is between the sharing out
threshold and overload threshold, and number of incoming calls in each
second reaches the threshold, new arrival call attempts will be shared out to
other SPU. Interval Type
When the RNC receives events 1A, 1C and 1D, the target cell can be added
to the active set only when CPICH Ec/No of the target cell is higher than
this absolute threshold.
The purpose for setting this parameter is as follows: The current events of
soft handovers are defined on the basis of relative thresholds and have no
requirement for the absolute quality. If the signal quality of added cells is
too poor, the general quality of the active set cannot be obviously improved,
but more downlink resources are occupied and more TPC errors are caused,
and the soft handover performance is worsened. Therefore, there should be
a baseline for the quality of the radio links to be added.
As for the impact on network performance:
Adjust this parameter according to the Ec/Io that the cell soft handover area
reaches as expected at network planning. The larger this parameter is, the
more difficult it is for the neighboring cells to join in the active set, but the
service quality of the joining cell can be ensured. The smaller this
parameter is, the easier it is for the neighboring cells to join in the active
set, but the service quality of the cell cannot be restricted if the value of this
parameter is excessively low.
Interval Type
Indicating whether to trigger soft handover cross the Iur interface between
the RNC and the neighboring RNC:
1) CS_SHO_SWITCH. Indicating whether to trigger hard handover for CS
cross the Iur interface.
2) HSPA_SHO_SWITCH. Indicating whether to trigger hard handover for
HSPA cross the Iur interface.
3) NON_HSPA_SHO_SWITCH. Indicating whether to trigger hard
handover for PS(R99) cross the Iur interface. Bit Field Type
Enumeration Type
Enumeration Type
Determine whether some system information blocks are broadcast in this
cell. If the corresponding system information block is selected, then send
this system information block in this cell. Bit Field Type
This parameter specifies the channel type and bit rate for RRC connection
establishment.
- FACH: The RRC connection is set up on the common channel.
- DCH_3.4K_SIGNALLING: The RRC connection is set up on the 3.4
kbit/s dedicated channel.
- DCH_6.8K_SIGNALLING: The RRC connection is set up on the 6.8
kbit/s dedicated channel.
- DCH_13.6K_SIGNALLING: The RRC connection is set up on the 13.6
kbit/s dedicated channel.
- DCH_27.2K_SIGNALLING: The RRC connection is set up on the 27.2
kbit/s dedicated channel.
Enumeration Type
Maximum rate of the narrowband AMR speech service for silver users. Enumeration Type
This parameter specifies the DL maximum bit rate of signal for PS domain
user. Enumeration Type
This parameter specifies the UL maximum bit rate of signal for PS domain
user. Enumeration Type
This parameter specifies the source IP address. IP Address Type
IMS SRB service downlink factor. Interval Type
The UE does not start the inter-RAT measurement if it detects that the
quality of the serving cell is higher than this threshold. For detailed
information of this parameter, refer to 3GPP TS 25.304. Interval Type
This parameter defines the slot format used by the SCCPCH. The
configuration of this parameter is relevant to the SF, pilot bit, and TFCI of
the SCCPCH. For detailed information of this parameter, refer to 3GPP TS
25.433 and 3GPP TS 25.211. Enumeration Type
Sequence number of available PRACH slot formats. For detailed
information of this parameter, refer to 3GPP TS 25.211. Interval Type
Sequence number of available PRACH slot formats. For detailed
information of this parameter, refer to 3GPP TS 25.211. Interval Type
Sequence number of available PRACH slot formats. For detailed
information of this parameter, refer to 3GPP TS 25.211. Interval Type
Sequence number of available PRACH slot formats. For detailed
information of this parameter, refer to 3GPP TS 25.211. Interval Type
Number of available PRACH slot formats. For detailed information of this
parameter, refer to 3GPP TS 25.211. Enumeration Type
The signalling route mask is used for sharing loads between signalling
routes. Suppose that the number of 1s in the value is expressed as n. Then
the maximum number of the routes for load sharing is 2^n. For example,
B0000 indicates that only one route can be used for load sharing. B0001
and B1000 indicate that at most two routes can be used for load sharing
while the others cannot. This mask AND the value of [Signalling link mask]
specified by ADD MTP3LKS must be zero. Enumeration Type
This parameter specifies the type of the start date. DATE indicates that the
DST starts from a certain day. WEEK indicates that the DST starts from a
certain week. DATEWEEK indicates that the DST starts from a certain day
in a certain week. Enumeration Type
Method of positioning the UE. Bit Field Type
This parameter specifies whether the alarm reporting for smoke is enabled. Enumeration Type
This parameter specifies the start month of the DST. Enumeration Type
This parameter specifies the number of the slot where the SPUa is located. Interval Type
This parameter specifies the number of a slot. For the logical uninhibition,
the value range of "Slot No." is {{0},{2},{4},{8~27}}. For the physical
uninhibition, the value range of "Slot No." is {{0~5},{8~27}}. Interval Type
This parameter specifies the slot that holds the SPUa. Interval Type
Number of the SPU slot where the SAAL link is terminated. Interval Type
When it is set to ON, the RNC sends UMTS cell load information to the
GSM during the non-coverage based system relocation in or out process.
When it is set to OFF, the RNC does not send UMTS cell load information
to the GSM during the system relocation in or out process. This parameter
is designed for the UMTS network to cooperate with the GSM network.
When the UE is handed over from the UMTS network to the GSM network,
the RNC normalizes the load information of the best cell and sends it to the
GSM network. Then, the GSM network determines whether to accept or
reject the handover request.This switch is only effective in CS domain,the
RNC does not send UMTS cell load information to the GSM in PS domain. Enumeration Type
The OSP should be input in hexadecimal format and cannot be 0. In
addition, it should be allocated in the SS7 network and cannot be repeated.
If SPC is BIT14 code, the value range is H'1~H'3FFF(1~16383).f SPC is
BIT16 code, the value range is H'1~H'FFFF(1~65535). If SPC is BIT24
code, the value range is H'1~H'FFFFFF(1~16777215). Interval Type
Indicating the number of bits of the OSP code. BIT14 means 14-bit
code,BIT16 means 16-bit code,and BIT24 represents 24-bit code. Enumeration Type
The OSP should be input in divided number format. In addition, it should
be allocated in the SS7 network and cannot be repeated. String Type
This parameter specifies the transmission rate over the FE port. Enumeration Type
For a high-mobility UE, multiples this parameter by its reselection delay to
reduce the reselection delay of the UE. This parameter can be set to 10 for
middle-speed UE, which means no influence upon reselection delay time.
This parameter is not configured when its value is 255. For detailed
inforamtion, refer to 3GPP TS 25.304. Interval Type
This parameter identifies a group of cells that have specific capabilities for
four service types: R99 real-time services, R99 non-real-time services,
HSPA services, and other services. Interval Type
This parameter indicates the scheduling priority. The value 15 indicates the
highest priority and the value 0 indicates the lowest. Interval Type
This parameter specifies the number of the source port of the IP loopback
test. Interval Type
Hysteresis used to determine the cell load level. It is denoted by the ratio of
NodeB TX power to the maximum TX power. It is used to avoid the
unnecessary ping-pong effect of a cell between two load levels due to tiny
load change. For detailed information of this parameter, refer to 3GPP TS
25.304. Interval Type
It is used to decide whether the cell load level is "Light" or not. It is
denoted by the ratio of NodeB TX power to the maximum TX power.
If the load of a cell is equal to or lower than this threshold, the load level of
this cell is light.
If the load level of a cell is light, the PUC algorithm will configure
selection/reselection parameters for this cell to lead the UE to reselect this
cell rather than the previous inter-frequency neighboring cell with heavy
load. Interval Type
The threshold used by SPU process system. When the equivalent user
number of this SPU system is over this threshold, latter calls will be
transferred to other SPU process system until equivalent user number is
bellow this SPU traffic share threshold. Interval Type
This parameter specifies the channel type of SRB.
- DCH: Both uplink and downlink are preferably carried on DCH.
- HSDPA: Uplink is preferably carried on DCH, and downlink is preferably
carried on HS-DSCH.
- HSPA: Uplink is preferably carried on E-DCH, and downlink is preferably
carried on HS-DSCH. Enumeration Type
This parameter specifies whether [SRB channel type] is valid in the RRC
connection setup procedure.
- TRUE: [SRB channel type] is valid in the RRC connection setup
procedure and other procedures.
- FALSE: [SRB channel type] is invalid in the RRC connection setup
procedure but valid in other procedures. Enumeration Type
SRB service downlink factor. Interval Type
The MAC-c on Iub interface will increase after the Enhanced
CELL_FACH is supported in the cell. When the UE enters the Enhanced
CELL_FACH state, this parameter determines the guaranteed speed of the
MAC-c flow that sends SRB data on the Iub interface. Interval Type
The MAC-c on Iub interface will increase after the Enhanced
CELL_FACH is supported in the cell. When the UE enters the Enhanced
CELL_FACH state, this parameter determines the maximum speed of the
MAC-c flow that sends SRB data on the Iub interface. Interval Type
This parameter specifies the type of the clock source. Interval Type
This parameter specifies the source IP address of the flow. IP Address Type
This parameter specifies the type of the clock source. Enumeration Type
This parameter specifies the number of the source end of timeslot cross
connection. Enumeration Type
Timer REPEAT_SREC.Frequency at which ER is allowed to be received.
If the second ER message is received before the timer expires, the link is
released. Interval Type
This parameter specifies the number of the RBS or RSS. Interval Type
This parameter specifies the number of a subrack. Interval Type
This parameter specifies the number of the RBS subrack. Interval Type
This parameter specifies the number of a subrack. Interval Type
Number of the subrack where the SAAL link is terminated. Interval Type
Relocation trigger time after IURCCH. The relocation occurs after timeout.
This parameter determines the probability of the relocation of the Iur
common channel based on time separation. The larger the value of this
parameter, the more UEs are carried over this Iur channel, and the more Iur
resource is occupied; if the value of this parameter is set too small, no UE
will be carried on the Iur channel, thus causing the waste of resources. Interval Type
Offset of the SSCH transmit power from the PCPICH transmit power in a
cell. If the value is excessively low, UEs at the edge of cells fail in network
searching, resulting in influence on coverage of the downlink common
channel. This finally affects the cell coverage. If the value is excessively
high, the power resources are wasted, and other channels are interfered
seriously, thus the cell capacity is influenced. Interval Type
This parameter specifies the threshold for clearing an alarm related to the
CPU usage. When the CPU usage is lower than the value of this parameter,
the alarm is cleared. Interval Type
This parameter specifies the threshold for reporting an alarm related to the
CPU usage. When the CPU usage is higher than the value of this parameter,
the alarm is reported. The value of this parameter must be higher than the
value of "CPU occupancy alarm clearance threshold". Interval Type
This parameter specifies the type of source.
- SPEECH: speech service
- UNKNOWN: non-speech service Enumeration Type
This parameter specifies the threshold for clearing an alarm related to the
DSP usage. When the DSP usage is lower than the value of this parameter,
the alarm is cleared. Interval Type
This parameter specifies the threshold for reporting an alarm related to the
DSP usage. When the DSP usage is higher than the value of this parameter,
the alarm is reported. The value of this parameter must be higher than the
value of "DSP occupancy alarm clearance threshold". Interval Type
Intra-system HCS cell reselection start threshold. When Srxlev of the
serving cell is less than this parameter, the UE starts the intra-frequency and
inter-frequency measurements so that better cells can be selected. For
details, refer to 3GPP TS 25.304. Interval Type
Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No
measured by UE) of the serving cell is lower than this threshold plus the
[Qqualmin] of the cell, the inter-RAT cell reselection procedure will be
started. This parameter is not configured when its value is 127. This
parameter is not configured when its value is 127. The intra-frequency cell
reselection has a priority higher than the inter-frequency cell reselection and
inter-RAT cell reselection, the intra-frequency cell reselection start
threshold should be higher than the inter-frequency cell reselection start
threshold and inter-RAT cell reselection start threshold. If the cell
reselection threshold is set to a comparatively high value, the UE may
frequently start cell reselections, and the battery of the UE may be largely
consumed. If the cell reselection threshold is set to a comparatively low
value, it is difficult for cell reselections to be started, and the UE may not
timely reside in the cells with good quality, affecting the quality of
communication between the UTRAN and the UE. For detailed information,
refer to 3GPP TS 25.304. Interval Type
This parameter specifies the subsystem No. of the SPU/MPU board. Interval Type
This parameter specifies the start time of the DST. Compound Type
This parameter specifies the service type. CBR and RTVBR are realtime
traffic and are usually carried on the control plane on the Iur, Iub, or Iu-CS
interface. NRTVBR and UBR are non-realtime traffic and are usually
carried on the user plane and control plane of the Iu-PS interface.
UBR_PLUS is usually carried on the OM plane. Enumeration Type
When a DCH is set up, the UE starts counting the number of faulty CRCs
within a specified sliding window. If the number of faulty CRCs exceeds
the specified threshold, event 5A is triggered. The length of the sliding
window is specified by Statistic Block Number For 5A Event. Interval Type
When the parameter is set to INACTIVE, the timed GPS frame
measurement is not activated. When the parameter is set to ACTIVE, the
timed GPS frame measurement is activated. Enumeration Type
Start time of the first interval when the "Cell dynamic shutdown" feature is
valid. Compound Type
Start time of the second interval when the "Cell dynamic shutdown"
feature is valid. Compound Type
Start time of the third interval when the "Cell dynamic shutdown" feature
is valid. Compound Type
CN protection timer. Interval Type
Protection timer used in case of DSP intermittent at the neighboring RNC. Interval Type
Maximum length of the STAT PDU list. Interval Type
This parameter specifies the logical serial number of a subflow for the
typical RAB. A bearer may use several subflows for transmission. For
example, AMR speech service may use three traffic subflows, which
correspond to three transport channels. Subflows 0, 1, and 2 carry bit flows
of classes A, B, and C respectively. For other types of RABs, there is only
one subflow. Therefore, the traffic subflow index is set to 0, which
corresponds to one transport channel. Interval Type
This parameter specifies the DST start day in a week. Enumeration Type
This parameter specifies the state of the port switch. Enumeration Type
This parameter specifies whether to turn on the BFD protocol switch. Enumeration Type
This parameter specifies the DST start week in a month. Enumeration Type
When call shock control starts, the AMR_RRC number can be accessed per
second for system. Interval Type
This parameter specifies the method to contact the manufacturer. String Type
This parameter specifies the system description of the RNC production. String Type
When call shock control starts, the register and 3G->2G reselect number
can be accessed per second for system. Interval Type
A timer to RNC wait for PS RESUME after successful CS InterRAT
handover. Interval Type
This parameter specifies the location of the RNC product. String Type
This parameter specifies the system ID of the RNC product. String Type
When call shock control starts, it is the max number of RRC_REJ
message. Interval Type
This parameter specifies the services provided by the RNC product. String Type
When the RRC REQ total number of one system reach this threshold in
period and can't been shared out to other SPU system, the RRC flow
control will be triggered. New RRC REQ will be rejected or discarded. Interval Type
Signalling route set test timer. When the reception of a TFP causes
unavailability of a route, this timer is started to regularly check whether the
route is recovered. Interval Type
Uninhibit acknowledgement timer. It is a protection timer waiting for an
uninhibit acknowledgement message (LUA) from the peer end after an
uninhibit message (LUN) is sent to the peer end. Interval Type
Force uninhibit timer. It is a protection timer waiting for a force uninhibit
acknowledgement message (LUA) from the peer end after a force uninhibit
message (LFU) is sent to the peer end. Interval Type
Inhibition acknowledgement timer. It is a protection timer waiting for an
inhibition acknowledgement message (LIA) from the peer end after an
inhibition message (LIN) is sent to the peer end. Interval Type
Link realignment timer. This timer is started when a link fails to be started.
The restart of the link is initiated after it expires. Interval Type
Time-control changeover timer. When a normal changeover cannot be
initiated, services will be changed over to an alternative link after this timer
expires to avoid disorder of data. Interval Type
Local inhibit test timer. After a local link is inhibited, this timer is started
to regularly check the management states at both ends of the link. Interval Type
Remote inhibit test timer. After a remote link is inhibited, this timer is
started to regularly check the management states at both ends of the link. Interval Type
T312 is started after the UE starts to establish a DCH and stopped when
the UE detects consecutive N312 "in sync" indications from L1. It indicates
physical channel setup failure upon the expiry of the timer. Protocol default
value is 1. Interval Type
T313 is started after the UE detects consecutive N313 "out of sync"
indications from L1. T313 is stopped after the UE detects consecutive N315
"in sync" indications from L1.It indicates Radio Link (RL) failure upon
expiry. Protocol default value is 3. Interval Type
T314 is started when the criteria for radio link failure are fulfilled and only
radio bearers (RBs) associated with T314 exist.T314 is stopped after the
Cell Update procedure has been completed. Protocol default value is 12.
In case of the RL failure when the UE is in CELL_DCH state, If the RL
cannot be successfully reconfigured by CELL UPDATE CONFIRM before
the expiry of the corresponding T314 (or T315), CELL UPDATE will be
resent for RL reconfiguration (this operation relates to T302 and N302).
T314 should be set greater than T302*N302. In case of the expiry of T314,
the corresponding service RBs will be removed.
Enumeration Type
T315 is started when the criteria for radio link failure are fulfilled, and only
the radio bearer associated with T315 exists.T315 is stopped after the Cell
Update procedure has been completed. Protocol default value is 180.
In case of the RL failure when the UE is in CELL_DCH state, T315 (or
T314) is started and CELL UPDATE is sent. If the RL cannot be
successfully reconfigured by CELL UPDATE CONFIRM before the expiry
of the corresponding T315 (or T314), CELL UPDATE will be resent for RL
reconfiguration (this operation relates to T302 and N302). T315 should be
set greater than T302*N302. In case of the expiry of T315, the
corresponding service RBs will be removed.
Enumeration Type
Difference between the System Frame Number (SFN) and NodeB Frame
Number (BFN) of the NodeB which the cell belongs to. It is recommended
that Tcell of difference cells under one NodeB should be unique. For
detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type
Maximum duration of cell reselection. This parameter, along with the [Max
number of cell reselection], is used for rate evaluation in HCS. For details,
refer to 3GPP TS 25.304. Enumeration Type
Enumeration Type
This parameter specifies the HSDPA bit rate measurement report period.
For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type
This parameter specifies the HSUPA bit rate measurement report period.
For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type
Value range: 1~6000
Physical value range: 10 to 60000, step: 10
Physical unit: ms
Content: UL basic common measurement report cycle. For detailed
information of this parameter, refer to 3GPP TS 25.433.
Recommended value: 20
Interval Type
This parameter defines the number of the transport formats. For detailed
information of this parameter, refer to 3GPP TS 25.302. Enumeration Type
Select the target BAM to switch over work area. Enumeration Type
When a DCH is set up, the UE starts counting the number of faulty CRCs
within a specified sliding window. If the number of faulty CRCs exceeds
the specified threshold, event 5A is triggered. The threshold is Event 5A
Threshold. Interval Type
If DL code TX power is higher than the Ea absolute threshold, event Ea is
triggered. This event triggers DL QoS operation. This parameter specifies a
relative threshold. Absolute Ea threshold = RL Max DL TX power - ThdEa. Interval Type
If DL code TX power is lower than the Eb absolute threshold, event Eb is
triggered. When this event report is received, DL QoS operation is stopped.
This parameter specifies a relative threshold. Absolute Eb threshold = RL
Max DL TX power - ThdEb. Interval Type
This parameter specifies the Traffic Handling Priority (THP) of each traffic
class carried on the logical channel. The value 1 means the highest priority,
the value 14 means the lowest priority, and the value 15 means no priority. Interval Type
This parameter specifies the user class associated with interactive traffic
handling priority 10. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 11. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 12. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 13. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 14. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 15. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 1. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 2. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 3. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 4. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 5. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 6. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 7. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 8. Enumeration Type
This parameter specifies the user class associated with interactive traffic
handling priority 9. Enumeration Type
This parameter specifies the Traffic Handling Priority (THP) class that the
THP priority is mapped to. This parameter is valid for only interactive
services. Enumeration Type
This parameter specifies the timeout duration of a sent ping packet. Interval Type
This parameter specifies the time duration of the packet. Interval Type
Specifying the time limitation for blocking a cell when normal priority is
selected. Interval Type
Timer_CU timer. Step is 0.05. This parameter will affect the efficiency and
delay of AAL2 transmission. Interval Type
This parameter specifies the number of ping packets. Interval Type
This parameter defines the length of the inter-freq coverage handover delay
to trig.
When the inter-freq coverage handover priority of the reported inter-freq
measure cells are lower than the highest priority of the measure cells,start
the inter-freq coverage handover delay timer.
When the timer expiry or the priority of the reported cells are equal to the
highest priority, start inter-freq handover. Interval Type
This parameter specifies the delay time after the RLC entity is established
or reconfigured and before the retransmission ratio monitoring is started. Interval Type
Time delay for triggering handovers to GSM cells with non-verified BSIC.
During the period of time specified by this parameter, if the signal quality
in a neighboring GSM cell satisfies inter-RAT handover conditions and the
neighboring GSM cell is not verified, an inter-RAT handover is triggered.
When the value of this parameter is 65535, the RNC does not perform
inter-RAT handovers to non-verified GSM cells. The higher the time-to-
trigger parameters are, the smaller the average number of handovers is, and
the possibility of call drops increases.
Interval Type
Interval Type
This parameter specifies the time from the moment when the traffic
volume of the DCH exceeds the upper threshold to the moment when the
traffic-related event 4A on DCH is triggered. This parameter is used to
avoid unnecessary reports triggered by DCH traffic volume fluctuation. The
larger the value of this parameter, the longer the required duration of the
traffic volume exceeding the upper threshold, and the smaller the possibility
of triggering traffic-related event 4A on DCH. Enumeration Type
This parameter specifies the time from the moment when the traffic
volume on the DCH falls below the lower threshold to the moment when
the traffic-related event 4B is triggered. This parameter is set to avoid
unnecessary reports triggered by DCH traffic fluctuation. The larger the
value of this parameter, the longer the required duration of the traffic
volume keeping below the lower threshold, and the smaller the possibility
of triggering traffic-related event 4B on DCH. Enumeration Type
This parameter specifies the number of consecutive periods during which
the percentage of retransmitted PDUs is higher than the threshold of event
A before event A is triggered.
Recommended value (default value): 2. Interval Type
Index of the traffic mapping used by the current adjacent node's bronze
user. Interval Type
Index of the traffic mapping used by the current adjacent node's gold user. Interval Type
Index of the traffic mapping used by the current adjacent node's silver user. Interval Type
Signalling link test acknowledgement timer. It is a protection timer waiting
for a signalling link test acknowledgement message (SLTA) from the peer
end after a signalling link test message (SLTM) is sent to the peer end. Interval Type
Signalling link repeat test timer. This timer is used to send the signalling
link test messages (SLTM) to the peer end regularly. Interval Type
This parameter specifies the time offset of the DST from the normal time. Interval Type
Enumeration Type
This parameter specifies the traffic class. Based on Quality of Service
(QoS), there are four traffic classes: conversational, streaming, interactive,
and background. Enumeration Type
This parameter specifies the traffic class that the service belongs to. Based
on Quality of Service (QoS), there are two traffic classes: interactive,
background. Enumeration Type
This parameter specifies the traffic type for the RRC redirection algorithm. Enumeration Type
Enumeration Type
Time delay to trigger the event 3C.
The value of this parameter correlates with slow fading. The larger the
value of this parameter, the lower the incorrect decision probability, but the
slower the response of the event 3C to measurement signal change.
Based on the existing emulation result, the hysteresis value is set to
effectively reduce the average number of handovers and the number of
wrong handovers, thus preventing unnecessary handovers. In addition, from
the emulation perspective, the UE at different rates may react differently to
the hysteresis value for the event. For the fast-moving UE, the call drop rate
is more sensitive to the hysteresis value, whereas for the slow-moving UE,
the call drop rate is less sensitive to the hysteresis value. This can also
reduce ping-pong handovers or wrong handovers. Thus, set the value
smaller for cells where fast-moving UEs are dominant, whereas set the
value bigger for cells where slow-moving UEs are dominant. The value of
this parameter can be adjusted according to the actual network statistics.
Because the report period of inter-frequency measurement is 480 ms, the
trigger time period shorter than 480 ms is invalid.
The bigger the time-to-trigger values are, the lower the average handover
frequency is; but the increase of the time-to-trigger values increases the risk
of call drops.
Enumeration Type
To guarantee the power control performance within a time slot, that is, to
ensure that the power control within a time slot is implemented based on all
links in the active set, the ideal UE Rx-Tx time difference should be 1024
chips. When the UE Rx-Tx time difference becomes greater than the
predefined threshold, event 6F will be triggered. For the definition and its
related details, refer to the 3GPP TS 25.331 protocol. Enumeration Type
To guarantee the power control performance within a time slot, that is, to
ensure that the power control within a time slot is implemented based on all
links in the active set, the ideal UE Rx-Tx time difference should be 1024
chips. When the UE Rx-Tx time difference becomes smaller than the
predefined threshold, event 6G will be triggered. For the definition and its
related details, refer to the 3GPP TS 25.331 protocol. Enumeration Type
This parameter specifies the number of a port that carries the link in a trunk
group. Interval Type
This parameter specifies the slot number for a member port in a trunk
group. Interval Type
Radio Link Failure Timer Duration. When the radio link set is in the
synchronized state, the NodeB starts the timer after it receives successive
out-of-sync indications of the number defined by NOutsyncInd. The NodeB
shall stop and reset the timer after receiving successive in-sync indications
of the number defined by NInsyncInd. When the timer expires, the NodeB
triggers the radio link failure process, and indicates which radio link set is
out-of-sync. If the value is excessively low, there are few chances for the
radio link to get synchronized. If the value is excessively high, the radio
link failure process is probably delayed, and the downlink interference
increases. Interval Type
Uniquely identifying an RNC. Interval Type
This parameter specifies the TRUNK IP address for the DHCP server. IP Address Type
This parameter specifies the IP address of the NodeB TRUNK. IP Address Type
This parameter specifies the subnet mask for the NodeB TRUNK. IP Address Type
This parameter specifies the number of a trunk group on the logical port. Interval Type
This parameter specifies the number of a timeslot. For E1 links, the value
of this parameter ranges from 1 to 31. For T1 links, the value of this
parameter ranges from 1 to 24. Enumeration Type
This parameter specifies the timeslot bearing the E1/T1 link. Bit Field Type
This parameter specifies the index of timeslot cross connection. The index
is automatically generated by the system. Interval Type
This parameter specifies the name of the scheduled task to be started. String Type
This parameter specifies the duration of the CPU usage test. Interval Type
This parameter specifies the time-to-live of a packet detected through
EthOAM 1AG link tracing. Interval Type
This parameter specifies the forward bandwidth of the logical port. Interval Type
Forward bandwidth of the IP path. Interval Type
This parameter is valid only when Transport Resource Group Type is ATM
or Transport Resource Group Type is IP and Bandwidth Mode is
FULL_DUPLEX. Interval Type
This parameter specifies the TX traffic record index at the port from which
the IPoA PVC goes out of the RNC. The TX traffic must have been
configured. Interval Type
This parameter specifies the upper layer application type to be set. The
type may be CCP, NCP, IPoA PVC, or ALCAP. Enumeration Type
Depending on the value of [Band indication], as shown below:
Band1
General frequencies: [10562-10838]
Additional frequencies: none
Band2
General frequencies: [9662-9938]
Additional frequencies:
{412,437,462,487,512,537,562,587,612,637,662,687}
Band3
General frequencies: [1162-1513]
Additional frequencies: none
Band4
General frequencies: [1537-1738]
Additional frequencies: {1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
2087}
Band5
General frequencies: [4357-4458]
Additional frequencies: {1007, 1012, 1032,1037, 1062, 1087}
Band6
General frequencies: [4387-4413]
Additional frequencies: {1037, 1062}
Band7
General frequencies: [2237-2563]
Additional frequencies: {2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762,
2787, 2812, 2837, 2862, 2887, 2912}
Band8
General frequencies: [2937-3088]
Additional frequencies: none
Band9
General frequencies: [9237-9387]
Additional frequencies: none
BandIndNotUsed:[0-16383]
Downlink UARFCN of a cell.For detailed information of this parameter,
refer to 3GPP TS 25.433.
Interval Type
General frequencies: [937-1288]
Additional frequencies: none
Band4:
General frequencies: [1312-1513]
Additional frequencies: {1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837,
1862}
Band5:
General frequencies: [4132-4233]
Additional frequencies: {782, 787, 807, 812, 837, 862}
Band6:
General frequencies: [4162-4188]
Additional frequencies: {812, 837}
Band7:
General frequencies: [2012-2338]
Additional frequencies: {2362, 2387, 2412, 2437, 2462, 2487, 2512, 2537,
2562, 2587, 2612, 2637, 2662, 2687}
Band8:
General frequencies: [2712-2863]
Additional frequencies: none
Band9:
General frequencies: [8762-8912]
Additional frequencies: none
BandIndNotUsed:
[0-16383]
Uplink UARFCN of a cell.
Suppose the Uplink UARFCN is unspecified and the value of [Band
indication] is Band1, Band2, Band3, Band4, Band5, Band6, Band7,
Band8,or Band9. Then the default Uplink UARFCN is as follows:
If the DL frequency belongs to common frequencies, then
Band1: Uplink UARFCN = Downlink UARFCN - 950
Band2: Uplink UARFCN = Downlink UARFCN - 400
Band3: Uplink UARFCN = Downlink UARFCN - 225
Band4: Uplink UARFCN = Downlink UARFCN - 225
Band5: Uplink UARFCN = Downlink UARFCN - 225
Band6: Uplink UARFCN = Downlink UARFCN - 225
Band7: Uplink UARFCN = Downlink UARFCN - 225
Band8: Uplink UARFCN = Downlink UARFCN - 225 Interval Type
This parameter specifies the unit time used for the BER test. Interval Type
This parameter specifies the upper limit of the alarm. String Type
Duration when the measured value of AMR keeps fulfilling the 6A1
measurement condition before the event 6A1 is triggered. Event triggering
is used for UL measurement. The event 6A1 is triggered when the measured
value is greater than the absolute upper threshold 6A1. When the event 6A1
is triggered, the AMR speech rate should be lowered. The measured value is
reported after it fulfills the conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to prevent the sudden
change of the measured value for being reported. The longer the trigger
time is, the greater the effect of ignoring sudden changes is. Yet the
response to changes of the measured value becomes slower. Enumeration Type
Duration when the measured value of AMR keeps fulfilling the 6A1
measurement condition before the event 6A2 is triggered. Event triggering
is used for UL measurement. The event 6A2 is triggered when the measured
value is greater than the absolute upper threshold 6A2. When the event 6A2
is triggered, the AMR speech rate should be lowered. The measured value is
reported after it fulfills the conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to prevent the sudden
change of the measured value for being reported. The longer the trigger
time is, the greater the effect of ignoring sudden changes is. Yet the
response to changes of the measured value becomes slower. Enumeration Type
Duration when the measured value of AMR keeps fulfilling the 6B1
measurement condition before the event 6B1 is triggered. Event triggering
is used for UL measurement. The event 6B1 is triggered when the measured
value is lower than the absolute lower threshold 6B1. When the event 6B1
is triggered, the AMR speech rate should be raised. The measured value is
reported after it fulfills the conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to prevent the sudden
change of the measured value for being reported. The longer the trigger
time is, the greater the effect of ignoring sudden changes is. Yet the
response to changes of the measured value becomes slower. Enumeration Type
Duration when the measured value of AMR keeps fulfilling the 6B2
measurement condition before the event 6B2 is triggered. Event triggering
is used for UL measurement. The event 6B2 is triggered when the measured
value is lower than the absolute lower threshold 6B2. When the event 6B2
is triggered, the AMR speech rate should be raised. The measured value is
reported after it fulfills the conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to prevent the sudden
change of the measured value for being reported. The longer the trigger
time is, the greater the effect of ignoring sudden changes is. Yet the
response to changes of the measured value becomes slower. Enumeration Type
This parameter specifies the default rate threshold for decision to use DCH
to carry UL PS domain background/interactive services. If the FRC
parameters of the best cell cannot be obtained, this default value will be
used. Only when the UL service rate is higher than or equal to this
threshold, and the DL service rate is higher than or equal to the downlink
threshold, the service will be set up on DCH. Otherwise, the service is set
up on CCH. According to the product specifications, only the
background/interactive services whose rate is lower than 16 kbit/s can be
carried on the common channel.Therefore, this parameter can only be set to
16 kbit/s or 8 kbit/s. Enumeration Type
UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink
initial bit rate will be set to this value if the uplink max bit rate is higher
than the initial bit rate.The larger this parameter to be set, the sooner max
bit rate to be reached, but the bit rate is more likely to be declined when
system congested, so it makes no sense to set this parameter too high.
Contrarily,the smaller the parameter to be set, the more easily the BE traffic
to be accessed at required bit rate. But over small setting will take longer to
adjust to needed bit rate. Enumeration Type
The rate decision threshold of UL PS domain background/interactive
service to be carried on E-DCH. When the maximum UL service rate is
higher than or equal to this threshold, the service will be carried on E-DCH;
otherwise, it will be carried on DCH. Enumeration Type
For a BE service that has a low maximum rate, the DCCC algorithm is not
obviously effective yet it increases algorithm processing. Thus, the traffic-
based DCCC algorithm is applied to BE services whose maximum UL rate
is greater than the threshold. Enumeration Type
This parameter specifies the UL FP mode of this type of RAB. For details
of normal mode and silent mode, refer to section 5.1.1 of the 3GPP TS
25.427. Enumeration Type
Maximum UL rate when coverage of the entire cell is ensured under
certain load. For a BE service that has a low maximum rate, the DCCC
algorithm is not obviously effective yet it increases algorithm processing.
Thus, the coverage-based DCCC algorithm is applied to BE services whose
maximum UL rate is greater than the threshold. Enumeration Type
This parameter specifies the UL GBR of the BE service. Enumeration Type
If the HS-DPCCH carries ACK/NACK, the system will not perform CAC.
If the HS-DPCCH carries CQI, the system will perform CAC. This
parameter refers to the resources reserved for the uplink HS-DPCCH
carrying ACK/NACK. The corresponding threshold is the uplink limit
capacity multiplied by this parameter. If the value is too high, the
possibility of wrong rejection to uplink admissions increases, leading to
waste in uplink resources. If the value is too low, the uplink resources is
insufficient. However, because the possibility of putburst load by
ACK/NACK and its impact are relatively low, the value can be set to a low
level, representing the loose admission rule. Interval Type
This parameter specifies the E-DCH data transfer mode of IMS signalling
services. It is valid only when IMS signalling services are mapped onto the
E-DCH. Enumeration Type
The UE can be selected to process load handover only when its bandwidth
is less than this threshold. The higher the parameter is, the higher the
service rate of the user in handover is, and the more obviously the cell load
is decreased. However, high value of the parameter gives rise to the
fluctuation and congestion of the target cell load. The lower the parameter
is, the smaller amplitude of the load decreases as a result of the inter-
frequency load handover, and the easier it is to maintain the stability of the
target cell load. Interval Type
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could
be triggered only when the SF factor corresponding to the uplink reserved
credit is higher than the uplink or downlink credit SF reserved threshold.
The lower the parameter value is, the easier the credit enters the congestion
status, the easier the LDR action is triggered, and the easier the user
experience is affected. A lower code resource LDR trigger threshold,
however, causes a higher admission success rate because the resource is
reserved. The parameter should be set based on the operator's requirement. Enumeration Type
This parameter has the same content as UlLdrFirstAction. The selected
actions, however, should be unique. Enumeration Type
Enumeration Type
If the ratio of UL load of the cell to the uplink capacity is not lower than
this threshold, the UL load reshuffling function of the cell is triggered. After
the basic congestion state of the cell load is released, the system no longer
implements the LDR action. Because the load fluctuates, the difference
between the LDR release threshold and trigger threshold should be higher
than 10%. The ping-pong effect of the preliminary congestion state may
occur. The lower the LDR trigger and release thresholds are, the easier the
system enters the preliminary congestion status, the harder it is released
from this status, the easier the LDR action is triggered, and the more likely
the users are affected. But, the admission success rate becomes higher since
the resources are preserved. The carrier shall make a trade-off between
these factors. Interval Type
This parameter specifies the maximum number of TFCs (Transport Format
Combination) allowed in the uplink. The larger the value of this parameter,
the larger the number of available TFCs in the uplink. Enumeration Type
UL activity factor of the R99 non AMR conversational service. Interval Type
The percentage of other service thresholds to the 100% uplink load. The
services refer to other admissions except the conversational AMR service,
conversational non-AMR service, and handover scenarios. It is applicable
to algorithm 1 and algorithm 2. The parameter is used for controlling other
service admissions. That is, when a service is accessing, the RNC
evalutates the measurement value of the uplink load after the service is
accessed. If the UL load of a cell is higher than this threshold after the
access of a service, this service will be rejected. If the UL load of a cell will
not be higher than this threshold, this service will be admitted.
The UL load factor thresholds include parameters of [UL threshold of Conv
non_AMR service], [UL handover access threshold] and [UL threshold of
other services]. The four parameters can be used to limit the proportion
between the conversational service, handover user and other services in a
specific cell, and to guarantee the access priority of other services. If the
value is too high the system load after admission may be over large, which
impacts system stability and leads to system congestion. If the value is too
low, the possibility of user rejects may increase, resulting in waste in idle
resources.
Interval Type
User release is an extreme method in reducing the cell load and recovering
the system when the cell is overloaded and congested.
The mechanism of the OLC is that an action is performed in each [OLC
period] and some services are selected based on the action rules to perform
this action. This parameter defines the maximum number of RABs released
in executing uplink OLC service release.
For the users of a single service, the releasing of RABs means the complete
releasing of the users. The releasing of RABs causes call drops, so
UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes should be set to a low
value. Higher values of the parameter get the cell load to decrease more
obviously, but the QoS will be affected.
Interval Type
If the ratio of UL load of the cell to the uplink capacity is not lower than
this threshold, the UL overload and congestion control function of the cell
is triggered. The lower the OLC trigger threshold is, the easier the system is
in the overload status. An excessively low value of the OLC trigger
threshold is very detrimental to the system performance. The lower the
OLC release threshold is, the harder the system releases the overload. The
value of the OLC release threshold should not be much lower than or close
to the OLC trigger threshold, or the system state may have a ping-pong
effect. The recommended difference between the OLC release threshold and
the OLC trigger threshold is higher than 10%. It is desirable to set the two
parameters a bit higher given that the difference between OLC trigger
threshold and OLC release threshold is fixed. Interval Type
Enumeration Type
Threshold of used frequency quality for triggering inter-frequency
measurement with measurement quantity of Ec/No for PS domain non-
HSPA services.
For PS domain non-HSPA services, if the value of [Inter-frequency measure
report mode] is set to EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the necessary conditions can be
met only when the quality of the used frequency is lower than this threshold
(Event 2B can be triggered only when both conditions are met.)
To set this parameter, you need to consider the following factors:
The cell signal quality of the used frequency is better and can meet the
coverage requirements of the current services.
After handover, even if the inter-frequency measurement is triggered again,
it is very difficult to hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower than the start
threshold for event 2F or equal to the threshold of event 2D.
Interval Type
Indicating whether HCS is used. For details, refer to 3GPP TS 25.304. Enumeration Type
This parameter specifies whether to use PPP or not. Enumeration Type
The ratio of the users which could launch the handover to inter-RAT
neighbour cell.
When the parameter is ALL_USER, it means all of the users could be
handover to the inter-RAT neighbour cell. When the parameter is HALF, it
means only 1/2 of the users could be handover to the inter-RAT neighbour
cell. When the parameter is THIRD, it means only 1/3 of the users could be
handover to the inter-RAT neighbour cell. When the parameter is
QUARTER, it means only 1/4 of the users could be handover to the inter-
RAT neighbour cell.
Enumeration Type
Percentage of User Plane Sharing Out Offset. Interval Type
Percentage of User Plane Sharing Out threshold. Interval Type
This parameter specifies the user priority. The user classes in descending
order of priority are Gold, Silver, and then Copper. Enumeration Type
This parameter specifies whether to use TRUNK or not. Enumeration Type
This parameter specifies the unit of the peak rate, average rate, and
minimum rate. Enumeration Type
VCI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type
This parameter specifies the type of check on the VCL. Enumeration Type
This parameter specifies the VLAN ID of the destination IP address. Interval Type
This parameter specifies the VLAN priority. Interval Type
AMR voice service downlink factor. Interval Type
VPI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type
This parameter indicating whether VP limit in cell. TRUE indicates that the
VP need limit in cell. FALSE indicates that the VP need not limit in cell. Enumeration Type
When the parameter is set to YES, the QOS control algorithm is used for
VP services. When the parameter is set to NO, the QOS control algorithm is
not used for VP services.The QOS action of VP services only includes inter
frequency handover. Enumeration Type
VP CDR(Call Drop Ratio) Per Spu, if the ratio is higher than this threshold
in a checking period, need arise KPI alarm. Interval Type
The minimum number of VP service setup attempt Per Spu, the sum of VP
service setup attempt need to be higher than this threshold to arise KPI
alarm which type is VP service successful setup ratio. Interval Type
Successful VP service setup ratio Per Spu, if the ratio is lower than this
threshold in a checking period, need arise KPI alarm. Interval Type
The Minimum number of VP release Per Spu, the sum of VP release need
to be higher than this threshold to trigger arise KPI alarm which type is VP
call drop ratio. Interval Type
This parameter specifies the work mode. The setting of this parameter
should be consistent with that at the peer end. Enumeration Type
This parameter specifies the time to wait before the restoration. Interval Type
This parameter specifies the X offset for connected mode. For a PTM
service in a cell, X UEs that receive this service need to retain in connected
mode, so as to reduce triggering of counting on the Uu interface during
recounting. The value of X = [PARA]NCountingThd[/PARA] + [PARA]
XOffset[/PARA]. Interval Type
For the PS BE service at a rate of 0 kbit/s, this parameter is used for the
rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizing
indicates that the resources are insufficient in the cell. The service may run
at a rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s
service of the UE is released after the timer expires. If the length is set to 0,
the timer is not started. Interval Type
This parameter specifies the time zone where the RNC located. Enumeration Type
GUI Value Range Actual Value Range Unit Default Value
R99, HSPA, SHARE R99,HSPA,SHARE None -
Enable
1~36000 1~36000 s -
6~3600 6~3600 s
-
0~65534 0 to 65534 None
RNC(Local RNC), NODEB RNC(Local RNC), NODEB None -
-22~5 -22~5 dB -6
4(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
1(ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
1(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
0~63 0~62, 63: Infinity None
20~64000 20~64000 ms -
-
-32767~32767 -32767~32767 m -
-107502~107502 -107502~107502 m -
- -90~90 second -
- -180~180 second -
3~10 3 to 10 None 3
14~27 14 to 27 None -
0~5 0 to 5 None -
- 0 to 63 character None
- 0 to 15 character None
NO_V
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
-(ADD
NRNCCELL,AD
D
QUICKCELLSE
TUP,ADD
CELLSETUP)
GSM900_DCS18
00_BAND_USE
D(ADD
Band1, Band2, Band3, Band Band1, Band2, Band3, Band None GSMCELL)
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
0~1024 0~1024 s -
10(ADD
CELLDCCC)
0~100 0~10, step: 0.1 dB -(SET DCCC)
20~64000 20~64000 ms -
3~10 3 to 10 None 3
FALSE
2000~60000 2000~60000 ms -
nonrpt(Not Report), rpt(Rep nonrpt,rpt None -
INT, DPU, XPU INT,DPU,XPU None -
PEUa, AEUa, FG2a, GOUa, PEUa,AEUa,FG2a,GOUa,A None -
FG2a, GOUa FG2a, GOUa None -
PEUa, POUa, UOIa PEUa, POUa, UOIa None -
PEUa, POUa PEUa,POUa None -
REQUIRED(AD
D
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHOC
OV,SET
INTERRATHON
COV)
REQUIRED(Verify mode), REQUIRED, NOT_REQUI None
AEUa, PEUa, AOUa, POUa AEUa,AOUa,PEUa,POUa None -
AEUa, PEUa, AOUa, POUa AEUa, PEUa, AOUa, POUa None -
PEUa(PEUa), AEUa(AEUa) AEUa, PEUa, AOUa, POUa None -
NODEB_CREDIT_CAC_SWIT
NODEB_CREDIT_CAC_S None -
SYS_LEVEL(SYS_LEVEL SYS_LEVEL,NODEB_LEV None -
1~5 1~5 s -
0~31 0 to 31 None
-
0~83 0 to 83 None
0~3 0 to 3 None
-
32~65535 32~65535 None
-
0~255 0~255 None
-32767~32767 -32767~32767 m -
-107502~107502 -107502~107502 m -
TX_DIVERSITY_ON_TO
_OFF,
TX_DIVERSITY_OFF_TO
_ON
TX_DIVERSITY_ON_TO_OFF(T None -
DELAY_ACTIVATION_SUPPO
DELAY_ACTIVATION_S None -
-32767~32767 -32767~32767 m -
-107502~107502 -107502~107502 m -
- -90~90 second -
-10000~10000 -10000~10000 m -
-32808~32808 -32808~32808 m -
1~31 1~31 d -
OFF, ON OFF,ON None -
INACTIVE, ACTIVE INACTIVE, ACTIVE None ACTIVE
SF4(SF4), SF8(SF8), SF16 SF4, SF8, SF16, SF32, SF6 None SF8
CELL_ANTENNA, CELL_ CELL_ANTENNA, CELL_ None -
1~65535 1~65535 s -
0~999 0~999 s -
0~180 0~180 s -
-
0~31 0 to 31 None
NO, YES NO, YES None NO
NO, YES NO, YES None NO
ALDER32, CRC32 ALDER32, CRC32 None CRC32
SBFD, ARP, MBFD SBFD, ARP, MBFD None -
TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
TEN_MSEC, MIN TEN_MSEC, MIN None )
TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
TEN_MSEC, MIN TEN_MSEC, MIN None )
TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
TEN_MSEC, MIN TEN_MSEC, MIN None )
TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
TEN_MSEC, MIN TEN_MSEC, MIN None )
-50~50 -50~50 dB 0
-50~50 -50~50 dB 0
0
-20~20 -20~20 dB
WALKING_SPE
ED_AND_HOT_
SPOT_CELL(AD
D CELLCMCF)
-(SET CMCF)
1~10000 1~10000 ms -
CMP_IU_IMS_PROC_AS CMP_IU_IMS_PROC_AS None -
-(SET DRD)
SF8(ADD
CELLDRD)
SF4, SF8, SF16, SF32, SF6 SF4, SF8, SF16, SF32, SF6 None
-(SET DRD)
OFF(ADD
CELLDRD)
ON, OFF ON, OFF None
COEXIST_MEAS_THD_CHOICE
COEXIST_MEAS_THD_C None
NON-SUPPORTING_UE_ONLY
NON-SUPPORTING_UE_O None -
1~7 1~7 s 2
30~90 30~90 s 30
10~200 10~200 ms 10
10~150 10 to 150 ms 15
10~150 10 to 150 ms 15
10~150 10 to 150 ms 15
10~150 10 to 150 ms 15
10~150 10 to 150 ms 25
10~150 10 to 150 ms 25
10~150 10 to 150 ms 25
10~150 10 to 150 ms 25
10~150 10 to 150 ms 25
10~150 10 to 150 ms 25
10~150 10 to 150 ms 50
10~150 10 to 150 ms 50
-50~50 -50~50 dB
0
-50~50 -50~50 dB
D0, D8, D16, D32, D64, D1 D0, D8, D16, D32, D64, D1 kbit/s -
D0, D8, D16, D32, D64, D1 D0, D8, D16, D32, D64, D1 kbit/s -
WBAMR_BITRA
TE_23.85K(ADD
CELLAMRCWB)
-(SET
AMRCWB)
WBAMR_BITRATE_6.60K 6.60, 8.85, 12.65, 14.25, 15 kbit/s
NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
CP1_not_Support
ed
CP1_Supported, CP1_not_S CP1_Supported, CP1_not_S None
80(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
0~100 0~100% per cent
OFF, ON OFF, ON None -
60~900 60~900 s -
SUPP_NONE, SUPP_IUF SUPP_NONE,SUPP_IUFL None -
-100~100 -100~100 ms -
-100~100 -100~100 ms -
-
0~16777215 0~16777215 None
BIT4(ADD
SCCPCHBASIC)
BIT2(ADD
PRACHBASIC)
BIT2, BIT4, BIT6, BIT8, B 2, 4, 6, 8, 12, 16, 24 bit
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
1~255 1~255 s -
RATE_UP_AND_DOWN_ORATE_UP_AND_DOWN_ONone -
1~65535 1~65535 s -
-35~-10 -35~-10 dB -
0~3600 0~3600 s -
-
D0, D1, D2, D3, D4, D5, D D0, D1, D2, D3, D4, D5, D None
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
-(SET
FRCCHLTYPEP
ARA)
D8(ADD
CELLFRC)
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 25 kbit/s -
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
1~6000 10~60000, step: 10 ms )
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
1~6000 10~60000, step: 10 ms )
-
1~32 1~32 None
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
D64(ADD
CELLDCCC)
-(SET DCCC)
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s
D0, D8, D16, D32, D64, D1 0, 8, 16, 32, 64, 128, 144, 2 kbit/s -
-
1~32 1~32 None
1
SF8
no action
NoAct(no action), InterFr NoAct,InterFreqLDHO,BE None
CodeAdj(ADD
CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
no action
NoAct(no action), InterFr NoAct,InterFreqLDHO,BE None
no action
NoAct(no action), InterFr NoAct,InterFreqLDHO,BE None
D16, D32, D48, D64, D96, 16, 32, 48, 64, 96, 128, 256 None D64
0~100 0~1, step:0.01 None 0
D1(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D1, D2, D3, D4, D5, D 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11 None )
AUTO_CALC, HAND_APP 0, 1 None -
D16, D32, D64, D128, D14 16, 32, 64, 128, 144, 256, 3 kbit/s -
1~4294967295 1~4294967295 ms
-
1~32 1~32 None
-
D0, D1, D2, D3, D4, D5, D D0, D1, D2, D3, D4, D5, D None
-
1~6000 10~60000, step:10 None
0~100 0~1, step:0.01 per cent 95
20(ADD
CELLQOSHO)
-(SET QOSHO)
0~512 0~512 s
-15~15 -15~15 dB
D64(ADD
CELLCMCF)
-(SET CMCF)
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
-
None
None, STTD, CP1 None, STTD, CP1 None
None
None, STTD, CP1 None, STTD, CP1 None
-18
-24~0 -24~0 dB
1~10000 1~10000 ms -
1~10000 1~10000 ms -
-(SET DRD)
2(ADD
CELLDRD)
0~5 0~5 None
10~150 10 to 150 ms 60
10~150 10 to 150 ms 60
10~150 10 to 150 ms 60
10~150 10 to 150 ms 60
10~150 10 to 150 ms 80
10~150 10 to 150 ms 80
0~31 0 to 31 None
OFF, ON OFF,ON None -
0(PING IP)
-(SET
PHBMAP,SET
DSCPMAP)
62(ADD
SCTPLNK)
0~63 0 to 63 None
0~21 0 to 21 None -
YES, NO YES, NO None -
0~31 0 to 31 None -
- 0.0.0.0~255.255.255.255 None
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
D0, D1, D2, D4, D8, D16, 0, 1, 2, 4, 8, 16, 32, 64, 128 frame -
1~3600 1~3600 s -
60~3600 60~3600 s -
0~31 0 to 31 None -
- 0.0.0.0~255.255.255.255 None -
0~65535 0~65535 ms
-(SET FRC)
41(ADD
CELLFRC)
0~49 -24.5~0 dB
1~31 1 to 31 None -
-350~150 -35~15,step:0.1 dB 10
-
M3UA_SGP(M3UA SPG), M3UA_SGP, M3UA_IPSP, None
1~900 1 to 900 s 1
10~900 10 to 900 s 60
1~8 1~8 None 1
5000~30000 5000~30000 ms -
5000~30000 5000~30000 ms -
D16, D32, D64, D128, D2 16, 32, 64, 128, 256, 512, byte D1024
D8, D16, D32, D64, D128 8, 16, 32, 64, 128, 256, 5 byte -
SUN(Sunday), MON(Monday)
SUN, MON, TUE, WED, THNone -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
1~32 1~32 None -
10(ADD
CELLMBMSFAC
H)
-(SET
MSCHFACH,SE
T MBMSFACH)
-350~150 -35~15, step: 0.1 dB
REQUIRE, NOT_REQUIR REQUIRE,NOT_REQUIRE None REQUIRE
0~30 0~3,step:0.1 dB 0
1(ADD
ATMLOGICPOR
T,ADD
UNILNK,ADD
IMAGRP,ADD
FRALNK)
-(ADD
PORTFLOWCTR
LPARA,SET
ETHPORT,SET
OPT)
0(ADD
IPLOGICPORT,A
DD
PPPLNK,ADD
MPGRP)
None
None, STTD None, STTD None
None
None, STTD None, STTD None
- 0.0.0.0~255.255.255.255 None -
-
- 0 to 128 characters None
- 0 to 128 characters None -
D0, D1, D2, D3, D4, D5, D 0,1,2,3,4,5,6,7,8,9,11,13,15 None -
D3(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D4, D6, D8, D12, D16, D24 4, 6, 8, 12, 16, 24, 32 None D32
OFF(OFF), ON(ON) OFF, ON None ON
ON(ADD
ATMLOGICPOR
T,ADD
UNILNK,ADD
MPGRP,ADD
IPLOGICPORT,A
DD
IMAGRP,ADD
PPPLNK,ADD
FRALNK)
-(SET
ETHPORT,SET
OPT)
1~10 1~10 ms 2
128~1024 128 to 1024 byte 256
0~31 0 to 31 None -
- 0.0.0.0~255.255.255.255 None -
DEG(Degree), SEC(Degree 0~1 None -
WBAMR_BITRA
TE_23.85K(ADD
CELLAMRCWB)
-(SET
AMRCWB)
WBAMR_BITRATE_6.60K 6.60, 8.85, 12.65, 14.25, 15 kbit/s
NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
D2, D10, D20, D50, D100, 2, 10, 20, 50, 100, 200, 500 ms D50
1000~600000 1000~600000 ms 5000
0~300 0~300 s 5
0~31 0 to 31 None -
0~83 0 to 83 None -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
SINGLEHOST(SingleHost) SingleHost, PrimHost, SecH None SingleHost
1~10000 1~10000 ms -
0~3 0 to 3 None -
-
1~32 1~32 None
-
1~32 1~32 None
14~27 14 to 27 None -
0~1024 0~1024 s -
None
None, STTD, CP1 None, STTD, CP1 None
0~5 0 to 5 None -
D10, D20, D50, D100, D20 10, 20, 50, 100, 200, 500, 1 ms -
D10, D20, D50, D100, D20 10, 20, 50, 100, 200, 500, 1 ms -
D2, D10, D20, D50, D100, 2,10, 20, 50, 100, 200, 500, ms -
D2, D10, D20, D50, D100, 2,10, 20, 50, 100, 200, 500, ms -
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
RATE_UP_AND_DOWN_ORATE_UP_AND_DOWN_ONone -
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~15 0~7.5,Step:0.5 dB
4(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
0~29 0~14.5,Step:0.5 dB/ dBm COV)
6(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
0~29 0~14.5,Step:0.5 dB
4(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
4(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
4(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~15 0~7.5,Step:0.5 dB
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
0~15 0~7.5,Step:0.5 dB
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~15 0~7.5,Step:0.5 dB
0(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0~29 0~14.5,Step:0.5 dB/ dBm
180~1260 180~1260 s -
60~600 60~600 s -
-50~50 -50~50 dB
0
-50~50 -50~50 dB
D10, D20, D40, D80, D160 10, 20, 40, 80, 160, 320, 64 s D320
UNI: 10000~30000
100~30000 NNI: 100~30000 ms -
0~120 0~120 s -
5000~30000 5000~30000 ms -
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
INTER_FREQ_COV(Coverage-
INTER_FREQ_COV,INTE None INTER_FREQ_CO
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
60(ADD
CELLINTERFRE
QHONCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
NCOV,SET
INTERFREQHO
COV)
3(ADD
CELLMBDRINT
ERFREQ)
0~512 0~512 s
-24~0 -24~0 dB -
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
EVENT_TRIGG
ER(ADD
CELLMBDRINT
ERFREQ)
PERIODICAL_REPORTING(Pe
PERIODICAL_REPORTIN None
CSAMR_INTERRAT(CS AMR
CSAMR_INTERRAT None -
-14(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-24~0 -24~0 dB
-100(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-24~0 -24~0 dB
-97(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-115~-25 -115~-25 dBm
-24~0 -24~0 dB
-110(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-24~0 -24~0 dB
-107(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-115~-25 -115~-25 dBm
60(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
3(ADD
CELLMBDRINT
ERRAT)
0~512 0~512 s
OFF, ON OFF,ON None -
21(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
D1000(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
NON_PERIODIC_REPORT(No
NON_PERIODIC_REPORT,250
ms
3(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
0~63 0~63 None
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~15 0~7.5,Step:0.5 dBm
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~65535 0~65535 s
-15(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-24~0 -24~0 dB
-110(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-24~0 -24~0 dB
-107(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-115~-25 -115~-25 dBm
PERIODICAL_R
EPORTING(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
EVENT_TRIGG
ER(ADD
CELLMBDRINT
ERRAT)
PERIODICAL_REPORTING(Pe
PERIODICAL_REPORTIN None
1~10 1 to 10 s 1
-24(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
-24~0 -24~0 dB
-115(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
1~86400 1~86400 s
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~29 0~14.5,Step:0.5 dB
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~29 0~14.5,Step:0.5 dB
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~29 0~14.5,Step:0.5 dB
0~29 0~14.5,Step:0.5 dB
12(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~29 0~14.5,Step:0.5 dB
12(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0~29 0~14.5,Step:0.5 dB
15000~120000 15000~120000 ms -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
-
1~5 1 to 5 None
14~27 14 to 27 None -
0~5 0 to 5 None -
1~3600 1~3600 s -
0~10 0~10 None 1
0~10 0~10 None 1
1~65535 1~65535 s -
1~65535 1~65535 s -
- None None -
- None None -
- None None -
- None None -
- -90:00:00.000~90:00:00.00 None -
0~10000 0~10000 ms 25
-
1~32 1~32 None
-(SET DRD)
UserNumber(AD
D CELLDRD)
-(SET DRD)
100(ADD
CELLDRD)
-(SET DRD)
OFF(ADD
CELLDRD)
ON, OFF ON, OFF None
-(SET DRD)
OFF(ADD
CELLDRD)
ON, OFF ON, OFF None
0~100 0~100 per cent -
NODEB_CREDIT_LDR_SWITC
NODEB_CREDIT_LDR_S None -
1~86400 1~86400 s
0~31 0 to 31 None -
0~83 0 to 83 None -
D0, D8, D16, D32, D64, D1 0, 8, 16, 32, 64, 128, 144, 2 kbit/s -
- 0~9Characters None -
B1111
-
SAALLNK, AAL2PATH, I SAALLNK, AAL2PATH, I None
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- -180:00:00.000~180:00:00. None -
-
0~3 0 to 3 None -
-
0~119 0~119 None
14~27 14 to 27 None -
0~5 0 to 5 None -
0~167 0 to 167 None -
SAAL
SAAL(SAAL Link Type ), SAAL, SCTP None
- 1 to 20 characters None -
MAP_HSUPA_TTI_2MS_ MAP_HSUPA_TTI_2MS_ None -
B1, B2, B3, B4, B5, B6, B7 B1,B2, B3,B4, B5,B6, B7,B None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
24(ADD
CELLSELRESEL
)
-(ADD
-50~33 -50~33 dBm NRNCCELL)
TRUE(Configure the maxim TRUE,FALSE None FALSE
1~100000 1~100000 m -
3~328080 3~328080 m -
3(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
-
2~255 2~255 None
256(ADD
PPPLNK)
-(ADD MPGRP)
1~60 1~60 s -
64(ADD
PPPLNK)
-(ADD MPGRP)
1~24 1 to 24 h 12
430
FALSE
0~31 0 to 31 None -
- 0.0.0.0~255.255.255.255 None -
14~27 14 to 27 None -
0~5 0 to 5 None -
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
PTM(ADD
SAMBMSPARA,
ADD
CELLMBMSPAR
A)
-(SET
RNCMBMSPAR
A)
- 000~999 None
-
0~7 0 to 7 None
- 1 to 20 characters None -
AUTO(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-
1~300 1 to 300 None
14~27 14 to 27 None -
LocalMep,
RemoteMep
LocalMep, RemoteMep None -
LONG, SHORT LONG(Long sequence numbeNone LONG
0~255 0~255 None -
-10~5 -10~5 dB -7
SF4, SF8, SF16, SF32, SF6 SF4, SF8, SF16, SF32, SF6 None SF8
0~49 -24.5~0, step: 0.5 dB -
-
1~60 1~60 min
-
1~60 1~60 min
-
1~60 1~60 min
1~60 1~60 min -
-
1~60 1~60 min
1~32 1 to 32 None 1
SF4, SF8, SF16, SF32, SF6 SF4, SF8, SF16, SF32, SF6 None SF4
- 00~99,000~999 None
COMM_MOCN_NRI_GLOBA
COMM_MOCN_NRI_GLOBA
None -
5000~30000 5000~30000 ms -
5000~30000 5000~30000 ms -
- 0.0.0.0~255.255.255.255 None -
0~63 0 to 63 None
CLEAR(Cleared), LOP(Lockout
CLEAR,LOP,FS,MS,EXERSNone -
0~100 0~1, step:0.01 None 60
80(ADD
CELLMBMSFAC
H)
-(SET
MBMSFACH)
50(ADD
CELLMBMSFAC
H)
-(SET
MBMSFACH)
D16, D32, D64, D128, D25 16, 32, 64, 128, 256 kbit/s -
-(SET
ETHPORT)
1500(ADD
SCTPLNK)
256~1500 256 to 1500 byte
1000(ADD
PPPLNK)
-(ADD MPGRP)
1~1500 1 to 1500 ls
D1, D2, D4, D10, D20, D50 D1, D2, D4, D10, D20, D50 None
D1, D2, D4, D10, D20, D50 D1, D2, D4, D10, D20, D50 None -
D1, D2, D4, D10, D20, D50 D1, D2, D4, D10, D20, D50 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 1 to 30 characters None -
- 1 to 30 characters None -
CRD_ADCTRL(Credit AdmiCRD_ADCTRL,HSDPA_U None -
NBM_LDC_ALL_UE,
NBM_LDC_MATCH_UE_
ONLY,
NBM_LDC_MATCH_UE_
FIRST
ALGORITHM_OFF(WPS Alg
ALGORITHM_OFF, ALG None -
4(ADD
SAMBMSPARA,
ADD
CELLMBMSPAR
A)
-(SET
RNCMBMSPAR
A)
- 0.0.0.0~255.255.255.255 None
15(ADD
CELLHCSHO)
-(SET HCSHO)
1~16 1~16 None
0 0 None -
1~60 1 to 60 min 30
0~2 0 to 2 None -
BASE_BOARD, CH_STM1,BASE_BOARD,CH_STM1, None -
NORMAL(Normal), PICO_TY
NORMAL, PICO_TYPE1, None NORMAL
1~288 5~1440, step:5 min -
hour, min, sec 00:00:00~23:59:59 s -
FALSE
3(ADD
SAMBMSPARA,
ADD
CELLMBMSPAR
A)
-(SET
RNCMBMSPAR
A)
- None None
3(ADD
CELLHCSHO)
-(SET HCSHO)
1~16 1~16 None
0~63 0 to 63 None -
OFF, ON OFF,ON None -
-20~20 -20~20 dB 4
-20~20 -20~20 dB -4
-20~20 -20~20 dB 4
-20~20 -20~20 dB -4
-10~10 -20~20,step:2 dB 2
100~86400000 100~86400000 ms
One_touch(For all the subra One_touch (for all the subr None Step_by_Step
330
PC_AMR_MODE_INDUCEPC_AMR_MODE_INDUCENone -
1~10 1~10 s 5
10, 20, 50, 100, 200, 500, 1 10,20,50,100,200,500,1000 ms 1000
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None
- 0.0.0.0~255.255.255.255 None -
Invalid
30(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
0~65535 0~65535 s
0~300 0~300 s 30
D250, D500, D1000, D2000 250, 500, 1000, 2000, 4000 ms D4000
D250, D500, D1000, D2000 250, 500, 1000, 2000, 4000 ms D4000
1~60 1~60 s 5
1(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
1~64 500~32000,Step:500 ms
4(ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
1~64 500~32000,Step:500 ms
1(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
1~64 500~32000,Step:500 ms
4(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
1~64 500~32000,Step:500 ms
D16(ADD
CELLINTRAFRE
QHO)
-(SET
D1, D2, D4, D8, D16, D32 1, 2, 4, 8, 16, 32, 64, INFI None INTRAFREQHO)
D16(ADD
CELLINTRAFRE
QHO)
-(SET
D1, D2, D4, D8, D16, D32 1, 2, 4, 8, 16, 32, 64, INFI None INTRAFREQHO)
D64(ADD
CELLINTRAFRE
QHO)
-(SET
D1, D2, D4, D8, D16, D32 1, 2, 4, 8, 16, 32, 64, INFI None INTRAFREQHO)
D0.9, D0.8, D0.7, D0.6, D0. 0.9, 0.8, 0.7, 0.6, 0.5, 0.4, 0. None -
Enable
V18, V36, V72, V144 18, 36, 72, 144 None V36
-10~5 -10~5 dB -7
14~27 14 to 27 None -
5~64 5 to 64 None 10
-
1~256 1~256 None
-
1~256 1~256 None
1~100 100~10000 ms 10
0~7 0 to 7 None -
0~7 0 to 7 None -
0~7 0 to 7 None -
-5~10 -5~10 dB -
1~8 1~8 dB 2
- 0.0.0.0~255.255.255.255 None -
0~3 0~3 None -
Enable
0~5 0 to 5 None -
0~255 0~255 None 4
D500(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
NON_PERIODIC_REPORT(No
NON_PERIODIC_REPORT,250
ms
0~60 0~60 s -
0~60 0~60 s -
0~60 0~60 s -
0~60 0~60 s -
0~60 0~60 s -
60(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
0~100 0~100% per cent
0~14400 0~14400 s -
0~14400 0~14400 s -
0~64800 0~64800 s -
0~14400 0~14400 s -
0~14400 0~14400 s -
OFF, ON OFF, ON None -
60~900 60~900 s -
0~100 0~100 per cent 100
0~100 0~100 per cent 100
- 0.0.0.0~255.255.255.255 None -
- 0.0.0.0~255.255.255.255 None -
-
1~32 1~32 None
6~86400 6~86400 s
0~60 0~60 s -
0~63 0 to 63 None -
0~63 0 to 63 None -
0~63 0 to 63 None -
0~63 0 to 63 None -
0~63 0 to 63 None -
20
-18(ADD
CELLSELRESEL
)
-(ADD
NRNCCELL)
-24~0 -24~0 dB
-58(ADD
CELLSELRESEL
)
-(ADD
NRNCCELL)
FALSE
TRUE, FALSE TRUE,FALSE None
1~65535 1~65535 s -
-
- 0 to 250 characters None
300~10000 300~10000 ms -
300~10000 300~10000 ms -
300~10000 300~10000 ms -
-(ADD
CELLREDIRECT
ION,SET
REDIRECTION,
SET DRD)
DependOnNCell(
ADD CELLDRD)
0~31 0 to 31 None -
OFF, ON OFF, ON None -
OFF, ON OFF, ON None -
2000~60000 2000~60000 ms -
1~10000 1~10000 ms -
1~20000 1~20000 ms -
1~20000 1~20000 ms -
1~20000 1~20000 ms -
1~10000 1~10000 ms -
1~60000 1~60000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~20000 1~20000 ms -
2000~60000 2000~60000 ms -
-29~29 -14.5~14.5,Step:0.5 dB -
D4000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
NON_PERIODIC_REPORT,NON_PERIODIC_REPORT,ms
25
D4000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
NON_PERIODIC_REPORT,NON_PERIODIC_REPORT,ms
25
D1000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
NON_PERIODIC_REPORT,NON_PERIODIC_REPORT,ms
25
RESERVED_SWITCH_0_BIRESERVED_SWITCH_0_BINone -
RESERVED_SWITCH_1_BIRESERVED_SWITCH_1_BINone -
2000~60000 2000~60000 ms -
2~5 2 to 5 s
RestrictionFixed, Restrictio RestrictionFixed,Restriction None -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
0~15 0~15 s -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
1~5000 1~5000 ms -
1~3000 1~3000 ms -
1~10000 1~10000 ms -
1~10000 1~10000 ms -
0(ADD
NODEBALGOPA
RA,ADD
CELLALGOSWI
TCH)
-(SET
CACALGOSWIT
CH)
0~4294967295 0~4294967295 None
0~4294967295 0~4294967295 None -
OFF, ON ON,OFF None -
0(ADD
NODEBALGOPA
RA,ADD
CELLALGOSWI
TCH)
-(SET
CACALGOSWIT
CH)
0~4294967295 0~4294967295 None
0~4294967295 0~4294967295 None -
OFF, ON ON,OFF None -
0~4294967295 0~4294967295 None -
OFF, ON ON,OFF None -
0~4294967295 0~4294967295 None -
OFF, ON ON,OFF None -
0~4294967295 0~4294967295 None -
0~4294967295 0 to 4294967295 None -
0~4294967295 0~4294967295 None -
0~4294967295 0 to 4294967295 None -
0~4294967295 0~4294967295 None -
0~4294967295 0 to 4294967295 None -
0~4294967295 0~4294967295 None -
NON-REVERTIVE, REVE NON-REVERTIVE, REVE None -
4294967295
0~4294967295 0~4294967295 None
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
1~65535 1~65535 s -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D16, D32, D64, D128, D25 16, 32, 64, 128, 256, 512, 1 byte -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
0~100 0~100 per cent 12
1~100 100~10000 ms 5
10~2810 530~148930 kbit/s -
1~3000000 1~3000000 kbit/s -
35000~120000 35000~120000 ms -
1~31 1 to 31 None -
DISABLE, ENABLE DISABLE, ENABLE None -
HIGH, LOW HIGH, LOW None -
- 0 to 63 character None -
-
D16, D32, D64, D128, D25 16, 32, 64, 128, 256 kbit/s
-(SET DRD)
OFF(ADD
CELLDRD)
ON, OFF ON, OFF None
0~4294967295 0~4294967295 None -
SUPPORT_CS, SUPPORT_ SUPPORT_CS, SUPPORT_ None -
0~120 0~120 s -
-24(ADD
CELLINTRAFRE
QHO)
-(SET
SMLC,SET
INTRAFREQHO)
-24~0 -24~0 dB
CS_SHO_SWITCH, HSPA CS_SHO_SWITCH, HSPA None -
TRUE
FALSE
NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
0,2,4,8,10 0, 2, 4, 8, 10 None -
0~27 0 to 27 None -
14~27 14 to 27 None -
14~27 14 to 27 None -
-
0~27 0 to 27 None
14~27 14 to 27 None -
14~27 14 to 27 None -
0~5,8~27 0 to 5, 8 to 27 None -
14~27 14 to 27 None -
-
14~27 14 to 27 None
0,2,4,8,10 0, 2, 4, 8, 10 None -
0,2,4,8,10 0, 2, 4, 8, 10 None -
0,2,4,8,10 0, 2, 4, 8, 10 None -
0,2,4,8,10 0, 2, 4, 8, 10 None -
0,2,4,8,10 0,2,4,8,10 None -
14~27 14~27 None -
BIT14: 1~16383
BIT16: 1~65535
BIT24: 1~16777215
1~16777215 None -
WNF
WNF, DNF WNF, DNF None
0~31 0 to 31 None -
1~4 1 to 4 None -
0~4 0 to 4 None -
- 0.0.0.0~255.255.255.255 None -
-
1~100 1 to 100 None
0~5 0 to 5 None
1~5 1 to 5 None -
0~5 0 to 5 None
1~5 1 to 5 None -
0~5 0 to 5 None -
0~5 0~5 None -
0~400 0~400 ms -
1~255 1~255 s -
1~100 1~100 s -
1~255 1~255 s -
SRNSR_DSCR_IUR_RES SRNSR_DSCR_IUR_RES None -
1~65535 1~65535 s -
-
0~3 0 to 3 None
D0, D8, D16, D32, D64, D1 D0, D8, D16, D32, D64, D1 kbit/s -
D0, D8, D16, D32, D64, D1 D0, D8, D16, D32, D64, D1 kbit/s -
FALSE(ADD
CELLMBMSSC
CPCH,ADD
PICH,ADD
AICH,ADD
SCCPCHBASIC)
-(SET
MBMSSCCPCH)
TRUE, FALSE TRUE, FALSE None
STTD_not_Suppo
rted
STTD_Supported, STTD_no STTD_Supported, STTD_no None
SUN(Sunday), MON(Monday)
SUN, MON, TUE, WED, THNone -
Close, Open Close,Open None -
BFD_OFF, BFD_ON BFD_OFF,BFD_ON None -
30000~60000 30000~60000 ms -
800~1500 800~1500 ms -
800~1500 800~1500 ms -
2000~3000 2000~3000 ms -
800~1500 800~1500 ms -
800~1200 800~1200 ms -
180000~360000 180000~360000 ms -
180000~360000 180000~360000 ms -
1400~2000 1400~2000 ms -
D100, D200, D400, D600, D100, D200, D400, D600, ms -
D5, D10, D15, D20, D30, D D5, D10, D15, D20, D30, D s -
1~8 1~8 s -
1~15 1~15 s
0~15 1~15 s -
D0, D2, D4, D6, D8, D12, D0, D2, D4, D6, D8, D12, s -
D0, D10, D30, D60, D180, D0, D10, D30, D60, D180, s -
D0, D10, D20, D30, D40, D0, D10, D20, D30, D40, s -
800~1200 800~1200 ms -
800~1200 800~1200 ms -
800~1200 800~1200 ms -
800~1200 800~1200 ms -
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
NotUsed, D10(10 seconds), NotUsed, 10, 20, 30, 40, 50, s NotUsed
60(ADD
CELLHCSHO)
-(SET HCSHO)
0~255 0~255 s
D2
-
1~6000 10~60000, step:10 ms
-
1~6000 10~60000, step:10 ms
-
1~6000 10~60000, step:10 ms
480(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
1~6000 10~60000, step: 10 ms )
180(ADD
CELLHCSHO)
-(SET HCSHO)
0~511 0~511 s
2
1~3 1 to 3 s
1~3600 1~3600 s -
1~64 1~64 ms 10
1~1024 1 to 1024 None 4
0(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0~1000 0~1000 ms
D0(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
D320(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~64000,65535 0~64000,65535 ms
0(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0~64000 0~64000 ms
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0~64000 0~64000 ms
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms D240
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms D2560
30000~90000 30000~90000 ms -
-(SET
MBMSFACH,AD
D FACH)
10(ADD
CELLMBMSFAC
H,ADD PCH)
0~2559 0~2559 ms
-(SET
MBMSFACH,AD
D FACH)
35(ADD
CELLMBMSFAC
H,ADD PCH)
0~1279 0~1279 ms
M3UA_OVERRIDE_MOD
,
M3UA_LOADSHARE_M
OD
(For details of these two
M3UA_OVERRIDE_MOD modes, refer to RFC4666.) None M3UA_LOADSH
-(ADD
FACHDYNTFS,
ADD
FACHLOCH,AD
D FACH)
1(ADD
RACHDYNTFS,
ADD RACH)
3(ADD
PCH,ADD
PCHDYNTFS)
1~32 1~32 None
0(ADD BCH)
0~255 0~255 None
TRCH_HSDSCH, TRCH_E TRCH_HSDSCH, TRCH_E None -
10(ADD
CELLHCSHO)
-(SET HCSHO)
0~120 0~120 s
0~31 0~31 s 1
D640(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D320(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D1280(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms -
0~7 0 to 7 None -
14~27 14 to 27 None -
0~7 0 to 7 None
240(ADD
CELLHCSHO)
-(SET HCSHO)
0~511 0~511 s
1~120 1 to 120 s 30
OFF, ON OFF, ON None -
1~4294967295 1 to 4294967295 ms -
1~128 1 to 128 s 64
10~2810 530~148930 kbit/s -
1~3000000 1~3000000 kbit/s -
0~4000000 0~4000000 kbit/s -
-
TRUE, FALSE TRUE, FALSE None
200~10000 200 to 10000 ms 500
10~60 10 to 60 ms 30
2000~60000 2000~60000 ms -
1~10000 1~10000 ms -
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms
D0, D1, D2, D3, D4, D5, D D0, D1, D2, D3, D4, D5, D None
-(SET
FRCCHLTYPEP
ARA)
D8(ADD
CELLFRC)
D1280(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
D2560(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
D1280(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
-
1~32 1~32 None
0~100 0~1, step:0.01 None 0
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
D64(ADD
CELLDCCC)
-(SET DCCC)
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s
D0, D8, D16, D32, D64, D1 0, 8, 16, 32, 64, 128, 144, 2 kbit/s -
-
1~32 1~32 None
SF8
no action
NoAct(no action), InterFre NoAct,InterFreqLDHO,BE None
inter-freq load
handover(ADD
CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
no action
NoAct(no action), InterFre NoAct,InterFreqLDHO,BE None
no action
NoAct(no action), InterFre NoAct,InterFreqLDHO,BE None
no action
NoAct(no action), InterFre NoAct,InterFreqLDHO,BE None
D16, D32, D48, D64, D96, 16, 32, 48, 64, 96, 128, 256 None D64
D19(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D1, D2, D3, D4, D5, D 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11 None )
-
1~64000 1~64000 ms
-
1~32 1~32 None
1~10 1~10 None 3
-
D0, D1, D2, D3, D4, D5, D D0, D1, D2, D3, D4, D5, D None
0~100 0~1, step:0.01 per cent 85
-
1~6000 10~60000, step:10 None
20(ADD
CELLQOSHO)
-(SET QOSHO)
0~512 0~512 s
D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256 kbit/s -
0~82 0~82 dB -
0~82 0~82 dB -
0~82 0~82 dB -
0~82 0~82 dB -
1~200 1~200 None 80
1~2 1~2 dB -
D640(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
D640(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
D0, D10, D20, D40, D60, 0, 10, 20, 40, 60, 80, 100, ms )
0~990 0~990 m -
0~3248 0~3248 m -
0~1800000 0~1800000 m -
0~5905440 0~5905440 m -
0~1800000 0~1800000 m -
0~5905440 0~5905440 m -
0~167 0 to 31(AEUa), 0 to 125(E1 None -
2~20 2~20 None -
128~447 AEUa(128~191),AOUa(256~None -
-12(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-97(ADD
CELLINTERRAT
HOCOV)
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-13(ADD
CELLINTERRAT
HOCOV)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-107(ADD
CELLINTERRAT
HOCOV)
CPICH_RSCP(A
DD
CELLQOSHO)
-(SET QOSHO)
-24~0 -24~0 dB
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-107(ADD
CELLINTERRAT
HOCOV)
NOT_USED
DISABLE
DISABLE, ENABLE DISABLE, ENABLE None
20~64000 20~64000 ms -
CLOSE(Close), OPEN(Ope CLOSE,OPEN None OPEN
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
M3UA_ASP, M3UA_IPSP
(For details of ASP and
IPSP, refer to RFC4666.)
M3UA_ASP, M3UA_IPSP None M3UA_ASP
Active(Format active area), Active,Standby None Active
30~60000 30 to 60000 s -
1~5 1~5 None -
0~65535 0~65535 s -
GMT-1200(GMT-12:00), G GMT-1200(GMT-12:00), G None -
Recommended Value Impact Parameter Relationship
None AAL2 Path None
50 RNC None
AC0:BARRED,AC1:BAR
When [PARA]DsacAutoSwitch[/PARA] is set to ON,the
RED,AC2:BARRED,AC3:
parameter need configure;else,need not configure.
BARRED,AC4:BARRED,
If [MML]ADD CELLDSACMANUALPARA[/MML]
AC5:BARRED,AC6:BAR
[PARA]RestrictionType[/PARA] value is
RED,AC7:BARRED,AC8: RNC
RestrictionFixed,need set AcRestriction value;when
BARRED,AC9:BARRED(
[MML]ADD CELLDSACMANUALPARA[/MML]
SET DSACAUTOALGO)
[PARA]RestrictionType[/PARA] value is
None(ADD
RestrictionFlexible,no need set AcRestriction value.
CELLDSACMANUALPA
RA)
If [MML]ADD CELLDSACMANUALPARA[/MML]
[PARA]RestrictionType[/PARA] value is
RestrictionFixed,need set AcRestriction value;when
[MML]ADD CELLDSACMANUALPARA[/MML]
[PARA]RestrictionType[/PARA] value is
None RNC RestrictionFlexible,no need set AcRestriction value.
When [PARA]DsacAutoSwitch[/PARA] is set to ON,the
10(SET parameter need configure;else,need not configure.
DSACAUTOALGO) If [MML]ADD CELLDSACMANUALPARA[/MML]
30(SET ACALGO) [PARA]RestrictionType[/PARA] value is
RNC
None(ADD RestrictionFixed,need set AcRestriction value;when
CELLDSACMANUALPA [MML]ADD CELLDSACMANUALPARA[/MML]
RA) [PARA]RestrictionType[/PARA] value is
RestrictionFlexible,no need set AcRestriction value.
2 RNC None
None RNC
None
1. When the value of
[PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD
GPS[/MML] is set to RNC, the GPS data report period,
DGPS data report period, AGPS antenna latitude, AGPS
antenna longitude, and AGPS antenna altitude should be
set.
1. When the value of
[PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD
GPS[/MML] is set to NODEB, the cell ID, GPS data
report period, DGPS data report period, AGPS antenna
latitude, AGPS antenna longitude, and AGPS antenna
altitude should be set.
1. When the value of
[PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD
GPS[/MML] is set to NRNC_RNC, the RNC ID, GPS
data report period, DGPS data report period, AGPS
antenna latitude, AGPS antenna longitude, and AGPS
antenna altitude should be set.
1. When the value of
[PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD
GPS[/MML] is set to NRNC_NODEB, the RNC ID, cell
ID, GPS data report period, DGPS data report period,
AGPS antenna latitude, AGPS antenna longitude, and
AGPS antenna altitude should be set.
None RNC
-6 Cell None
Cell(ADD
CELLINTERFRE
QHOCOV)
4
RNC(SET
INTERFREQHO
COV)
This parameter is valid when
[PARA]InterFreqReportMode[/PARA] is set to
EVENT_TRIGGER.
Cell(ADD
CELLINTERFRE
QHONCOV)
1
RNC(SET
INTERFREQHO
NCOV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
4
RNC(SET
INTERRATHOC This parameter is valid when
OV) [PARA]InterRatReportMode[/PARA] is set to
EVENT_TRIGGER.
Cell(ADD
CELLINTERRAT
HONCOV)
1
RNC(SET
INTERRATHON
COV)
None
This parameter is required when the
None RAB [PARA]RlcMode[/PARA] parameter is set to AM.
NO RNC None
5 RNC None
90 RNC None
61 Cell None
None(ADD
NRNCCELL,ADD
QUICKCELLSETUP,ADD
CELLSETUP)
Cell
GSM900_DCS1800_BAN
D_USED(ADD
GSMCELL)
None
5 RNC None
5 RNC None
5 RNC None
5 RNC None
5 RNC None
D0 RNC None
D0 RNC None
D0 RNC None
D0 RNC None
D0 RNC None
D0 RNC None
5 RNC None
5 RNC None
06&00&00 Cell
0 Cell None
01&00&00 Cell
ON Cell None
The value of this parameter must satisfy the following
relationshiprelationship:
5 Cell [PARA][BgnAbnormalThd]>=[BgnUpdateThd][/PARA] .
This parameter is required when the
[PARA]TrchType[/PARA] parameter is set to
TRCH_DCH. The setting of the
[PARA]SirAdjustStep[/PARA] parameter is associated
with this parameter. Assume that this parameter is changed
from BLERquality1 to BLERquality2 and
[PARA]SirAdjustStep[/PARA] is changed from
SirAdjustStep1 to SirAdjustStep2. Then, these values
must fulfill the following condition: (1- BLERquality1) x
SirAdjustStep1 / BLERquality1 = (1 - BLERquality2) x
None RAB SirAdjustStep2 / BLERquality2.
FALSE Cell
None
D2 RNC None
None
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERRAT
REQUIRED
HONCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERRATHON
COV)
None
None E1/T1 link None
None Cell None
None E1T1 Link None
When the value of [PARA]OT[/PARA] in [MML]LOD
PATCH[/MML] is set to Step_by_Step, the value of
None RNC [PARA]BT[/PARA] should be set.
None board None
None E1T1 link None
None board None
When the value of [PARA]BT[/PARA] in [MML]ADD
IMAGRP[/MML] is set to AEUa or AOUa, the IMA group
None RNC number should be set.
None Corresponding opti None
None LGC port None
[PARA]BWDHORSVBW[/PARA]/
[PARA]BWDCONGBW[/PARA]/
[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD
IPPATH[/MML] must be all zero when
[PARA]RxBw[/PARA] is zero,or
[PARA]BWDHORSVBW[/PARA] <
[PARA]BWDCONGBW[/PARA] <
[PARA]BWDCONGCLRBW[/PARA] <
0 IP Path [PARA]RxBw[/PARA].
[PARA]BWDHORSVBW[/PARA]/
[PARA]BWDCONGBW[/PARA]/
[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]RxBw[/PARA] is zero.
PPP Link(ADD
PPPLNK)
IMA group(ADD
IMAGRP)
Fractional
link(ADD
0
FRALNK)
UNILNK(ADD
UNILNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
None
If [PARA]BWADJ[/PARA] is set to be ON,
[PARA]BWDHORSVBW[/PARA],
[PARA]BWDCONGBW[/PARA],
[PARA]BWDCONGCLRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PARA] <
[PARA]BWDCONGBW[/PARA] <
[PARA]BWDCONGCLRBW[/PARA] <
[PARA]MINBW[/PARA] or
[PARA]BWDHORSVBW[/PARA] =
[PARA]BWDCONGBW[/PARA] =
[PARA]BWDCONGCLRBW[/PARA] = 0.
If [PARA]BWADJ[/PARA] is set to be OFF,
[PARA]BWDHORSVBW[/PARA],
[PARA]BWDCONGBW[/PARA],
[PARA]BWDCONGCLRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PARA] <
[PARA]BWDCONGBW[/PARA] <
[PARA]BWDCONGCLRBW[/PARA] <
[PARA]CIR[/PARA] or
[PARA]BWDHORSVBW[/PARA] =
[PARA]BWDCONGBW[/PARA] =
0 LGC port [PARA]BWDCONGCLRBW[/PARA] = 0.
[PARA]BWDHORSVBW[/PARA]/
[PARA]BWDCONGBW[/PARA]/
[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]RxBw[/PARA] is zero.
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
UNILNK(ADD
0
UNILNK)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
None
[PARA]BWDHORSVBW[/PARA]/
[PARA]BWDCONGBW[/PARA]/
[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD
IPPATH[/MML] must be all zero when
[PARA]RxBw[/PARA] is zero,or
[PARA]BWDHORSVBW[/PARA] <
[PARA]BWDCONGBW[/PARA] <
[PARA]BWDCONGCLRBW[/PARA] <
0 IP Path [PARA]RxBw[/PARA].
[PARA]BWDHORSVBW[/PARA]/
[PARA]BWDCONGBW[/PARA]/
[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]RxBw[/PARA] is zero.
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
120 LGC port parameter should be set.
When [PARA]GRPT[/PARA] in [MML]ADD
None Transmission resou RSCGRP[/MML] is set to IP, this parameter is valid.
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
25 LGC port parameter should be set.
ON RNC None
CELL_LEVEL:ON RNC None
3 RNC None
IPoA PVC(ADD
When the value of [PARA]CARRYT[/PARA] in
IPOAPVC)
[MML]ADD IPOAPVC[/MML] is set to FRAATM, the
SAAL(ADD
CARRYFRAATMLNK is required.
SAALLNK)
When the value of [PARA]CARRYT[/PARA] is set to
None AAL2 Path(ADD
FRAATM, this parameter is valid.
AAL2PATH)
When the value of [PARA]CARRYT[/PARA] in
LGC port(ADD
[MML]ADD AAL2PATH[/MML] is set to FRAATM, this
ATMLOGICPOR
parameter is valid.
T)
IPoA PVC(ADD
When the value of [PARA]CARRYT[/PARA] in
IPOAPVC)
[MML]ADD IPOAPVC[/MML] is set to IMA, the
SAAL(ADD
CARRYIMAGRPN is required.
SAALLNK)
When the value of [PARA]CARRYT[/PARA] is set to
None AAL2 Path(ADD
IMA, this parameter is valid.
AAL2PATH)
When the value of [PARA]CARRYT[/PARA] in
LGC port(ADD
[MML]ADD AAL2PATH[/MML] is set to IMA, this
ATMLOGICPOR
parameter is valid.
T)
None NodeB
None
When the value of [PARA]CARRYT[/PARA] in
IPoA PVC(ADD [MML]ADD IPOAPVC[/MML] is set to NCORT, the
IPOAPVC) CARRYNCOPTN is required.
SAAL(ADD When the value of [PARA]CARRYT[/PARA] is set to
None
SAALLNK) NCOPT, this parameter is valid.
AAL2 Path(ADD When the value of [PARA]CARRYT[/PARA] in
AAL2PATH) [MML]ADD AAL2PATH[/MML] is set to NCOPT, this
parameter is valid.
IPoA PVC(ADD
When the value of [PARA]CARRYT[/PARA] in
IPOAPVC)
[MML]ADD IPOAPVC[/MML] is set to UNI, the
SAAL(ADD
CARRYUNILNKN is required.
SAALLNK)
When the value of [PARA]CARRYT[/PARA] is set to
None AAL2 Path(ADD
UNI, this parameter is valid.
AAL2PATH)
When the value of [PARA]CARRYT[/PARA] in
LGC port(ADD
[MML]ADD AAL2PATH[/MML] is set to UNI, this
ATMLOGICPOR
parameter is valid.
T)
SAAL(ADD
SAALLNK) When the value of [PARA]CARRYT[/PARA] is set to
None
IPoA PVC(ADD IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this
IPOAPVC) parameter is valid.
SAAL(ADD
SAALLNK) When the value of [PARA]CARRYT[/PARA] is set to
None
IPoA PVC(ADD IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this
IPOAPVC) parameter is valid.
IPoA PVC(ADD
When the value of [PARA]CARRYT[/PARA] is set to
IPOAPVC)
ATMLGCPORT, this parameter is valid.
SAAL(ADD
None When the value of [PARA]CARRYT[/PARA] in
SAALLNK)
[MML]ADD AAL2PATH[/MML] is set to ATM logic
AAL2 Path(ADD
port, this parameter is valid.
AAL2PATH)
1024 SAALLNK/AAL2PATH
None
15 RNC None
Valid when [PARA]CellLocCfgType[/PARA] is set to
None Cell BOTH or CELL_ANTENNA
TU Cell None
15 RNC None
SINGLE_HOST Cell None
PCPICH,ADD
SSCH,ADD
PSCH,ADD
PRACHASC,AD
D
QUICKCELLSE
TUP,ADD
CELLMBMSSA,
ADD
CELLEFACH,AD
D
CELLCBSSAC,A
DD
CELLRLACTTI
ME,ADD
SMLCCELL,AD
D
CELLAMRC,AD
None D
CELLDCCC,AD
D
CELLAMRCWB,
ADD
CELLSETUP)
RNC(ADD
CELLDSACMA
NUALPARA,AD
D
CELLMBDRINT
ERRAT,ADD
NRNCCELL,AD
D
CELLHCSHO,A
DD
INTRAFREQNC The value of this parameter is dependent on the value of
ELL,ADD [PARA]CellId[/PARA] in [MML]ADD
INTERFREQNC SMLCCELL[/MML].
10 RNC None
OFF RNC None
Valid when [PARA]CellLocCfgType[/PARA] is set to
ACTIVE Cell BOTH or CELL_ANTENNA
None Cell
None
90 Cell
9 RNC None
45 RNC None
30 Cell
None Cell
None
CFG_DL_BLIND_DETECTIRNC None
2 RNC None
5 RNC None
TEN_MSEC RNC
None
TEN_MSEC RNC
None
TEN_MSEC RNC
None
TEN_MSEC RNC
None
TEN_MSEC RNC
None
TEN_MSEC RNC
None
Cell(ADD
CELLQUALITY
MEAS)
TEN_MSEC
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
TEN_MSEC
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
TEN_MSEC
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
TEN_MSEC
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLSETUP)
0
RNC(ADD
NRNCCELL)
None
0 Cell None
0 Cell None
0 Cell
None
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to OFF, this
None LGC port parameter should be set.
None RNC None
Cell(ADD
WALKING_SPEED_AND CELLCMCF)
_HOT_SPOT_CELL RNC(SET
CMCF)
None
CMCF_DL_HLS_SWITCH:RNC None
RNC(RST
IU,RST
IURESOURCE,A
DD
CNNODE,ADD
None
CNDOMAIN)
RAB(ADD
TYPRABBASIC,
ADD
CELLRLPWR) This parameter cannot be set to CS_DOMAIN when the
[PARA]TrafficClass[/PARA] parameter is set to
INTERACTIVE or BACKGROUND.
None RNC
None
Normal RNC None
Cell(ADD
This parameter is valid only when
QUICKCELLSE
[PARA]CnOpGrpIndex[/PARA] in [MML]ADD
TUP,ADD
CNOPERGROUP[/MML] is added.
None GSMCELL,ADD
This paramter is valid only when
NRNCCELL)
[PARA]CnOpGrpIndex[/PARA] in [MML]ADD
(ADD
CNOPERGROUP[/MML] is added.
CELLSETUP)
ON Cell None
None
70 RNC None
Cell(ADD
This parameter is available if the value of
CELLDCCC)
20 [PARA]BEQosPerform[/PARA] in [MML]SET
RNC(SET
QOSACT[/MML] is YES.
DCCC)
When [PARA]MOCNSupport[/PARA] in [MML]SET
OPERATORSHARINGMODE[/MML] is set to YES,
CommPlmnUsingType needs to be set.Otherwise,it does
NON-SUPPORTING_UE_ORNC not need.
When the value of [PARA]SAALLNKT[/PARA] is set to
2 SAAL NNI, this parameter is valid.
When the value of [PARA]SAALLNKT[/PARA] is set to
30 SAAL NNI, this parameter is valid.
When the value of [PARA]SAALLNKT[/PARA] is set to
10 SAAL NNI, this parameter is valid.
The relationship between the congestion threshold, the
recover threshold and the packet discard threshold must be
packet discard threshold>congestion threshold>recover
IP:15; ATM:20 RNC threshold.
The relationship between the congestion threshold, the
recover threshold and the packet discard threshold must be
packet discard threshold>congestion threshold>recover
IP:15; ATM:20 RNC threshold.
The relationship between the congestion threshold, the
recover threshold and the packet discard threshold must be
packet discard threshold>congestion threshold>recover
IP:15; ATM:20 RNC threshold.
The relationship between the congestion threshold, the
recover threshold and the packet discard threshold must be
packet discard threshold>congestion threshold>recover
IP:15; ATM:25 RNC threshold.
1.When the value of [PARA]PORTPROTYPE[/PARA] in
[MML]ADD PORTFLOWCTRLPARA[/MML] is set to
IP, this parameter should be set.
2.The relationship between the congestion threshold, the
recover threshold and the packet discard threshold must be
packet discard threshold>congestion threshold>recover
25 RNC threshold.
NO RNC None
2 Cell None
This parameter is valid only when
2 Cell [PARA]QualMeas[/PARA] is set to CPICH_ECNO.
0 Cell
Cell(ADD
This parameter is valid when
CELLINTERRAT
[PARA]NcovHoOn2GldInd[/PARA] in [MML]SET
HONCOV)
80 INTERRATHONCOV[/MML] is set to ON.
RNC(SET
This parameter is valid when
INTERRATHON
[PARA]NcovHoOn2GldInd[/PARA] is set to ON.
COV)
TRUE(SET
DSACAUTOALGO)
None(ADD RNC
CELLDSACMANUALPA
RA) When [PARA]DsacAutoSwitch[/PARA] is set to ON,the
parameter need configure;else,need not configure.
5 RNC None
5 RNC None
BIT4(ADD
SCCPCHBASIC)
Physical channel
BIT2(ADD
PRACHBASIC)
None
5 RNC None
50 RNC None
None Transmission resou None
ON RNC None
None RNC None
None RNC This classified zone is not bound to other service areas.
The following relationship must be satisfied:
[PARA]D2F2PTvmThd[/PARA] <
[PARA]F2DTvmThd[/PARA];
[PARA]D2F2PTvmThd[/PARA] <
D64 RNC [PARA]BeEFach2DTvmThd[/PARA].
30 RNC None
30 RNC None
RATE_UP_AND_DOWN_ORNC None
30 RNC None
16 RAB None
2 RAB None
None
This parameter is valid only when the
[PARA]CodeBalancingDrdSwitch[/PARA] parameter is
set to ON through the [MML]SET DRD[/MML]
7 RNC command.
This parameter is required when the
Cell(ADD [PARA]QrxlevminExtSup[/PARA] parameter is set to
CELLSELRESEL TRUE but not required when the
None ) [PARA]QrxlevminExtSup[/PARA] parameter is set to
RNC(ADD FALSE.
NRNCCELL) This parameter is valid only when
[PARA]QrxlevminExtSup[/PARA] is set to TRUE.
M3UA(ADD
M3DE)
None RNC(ADD
M3LKS,ADD The [PARA]DENO[/PARA] field in [MML]ADD
M3RT) M3DE[/MML]
None Ethernet port None
None RNC None
None Ethernet port None
None RNC None
1 Cell None
D6(SET LDM)
RNC
D3(SET SATLDM)
None
RNC(SET
FRCCHLTYPEP
D8 ARA) If this parameter is set through both the [MML]SET
Cell(ADD FRCCHLTYPEPARA[/MML] and [MML]ADD
CELLFRC) CELLFRC[/MML] commands, the parameter set through
the [MML]ADD CELLFRC[/MML] command takes
precedence over that set through the [MML]SET
FRCCHLTYPEPARA[/MML] command.
This parameter can be used for selection of the initial rate
for BE services only when the DCCC_SWITCH under the
[PARA]Chswitch[/PARA] parameter is set to on through
the [MML]SET CORRMALGOSWITCH[/MML]
D64 RNC command.
5 RNC
None
0 Cell None
The value of this parameter must satisfy the following
relationship:
[PARA]DlOlcTrigThd[/PARA](See [MML]ADD
CELLLDM[/MML]) >= [PARA]DlCellTotalThd[/PARA];
[PARA]DlCellTotalThd[/PARA] >=
90 Cell [PARA]DlHOThd[/PARA] .
80 Cell
80 Cell
Cell(ADD
CELLLDR)
3
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
3
NodeB(ADD
NODEBLDR)
None
When the value of DlMidRateCalc is
HAND_APPOINT,the following relationship must be
satisfied:
[PARA]DlDcccRateThd[/PARA] <=
D64 RNC [PARA]DlMidRateThd[/PARA].
SF32 Cell
The value of this parameter must satisfy the following
relationship:
[PARA]DlCellTotalThd[/PARA] >=
[PARA]DlHOThd[/PARA] ;
[PARA]DlHOThd[/PARA] >
[PARA]DlConvAMRThd[/PARA];
[PARA]DlHOThd[/PARA] >
[PARA]DlConvNonAMRThd[/PARA] .
85 Cell
0 Cell None
This parameter is valid only when
[PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or
10 RNC COPPER.
20 Cell None
1 Cell None
5 RNC
None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
SF8
NodeB(ADD
NODEBLDR)
The value of this parameter must not be larger than
[PARA]DlHoCeCodeResvSf[/PARA] in [MML]ADD
CELLCAC[/MML].
None
Cell(ADD
CELLLDR)
no action
NodeB(ADD
NODEBLDR) None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
The value of this parameter must satisfy the following
relationship:
[PARA]DlLdrTrigThd[/PARA] >=
[PARA]DlLdrRelThd[/PARA];
[PARA]DlOlcRelThd[/PARA] >=
[PARA]DlLdrRelThd[/PARA].
60 Cell
inter-freq load
Cell(ADD
handover(ADD
CELLLDR)
CELLLDR)
NodeB(ADD
no action(ADD
NODEBLDR)
NODEBLDR) None
70 Cell
5 RNC
None
3 Cell None
3 Cell None
D1 RNC
None
85 Cell
0 Cell None
100 RNC
None
The value of this parameter must satisfy the following
relationship:
[PARA]DlOlcTrigThd[/PARA] >=
[PARA]DlOlcRelThd[/PARA];
[PARA]DlOlcTrigThd[/PARA] >
[PARA]DlLdrTrigThd[/PARA];
[PARA]DlOlcTrigThd[/PARA] >=
[PARA]DlCellTotalThd[/PARA].
95 Cell
75 Cell
The value of this parameter must satisfy the following
relationship:
[PARA]DLOVSFSF[/PARA]>=[PARA]DLCODENO[/PA
None Cell RA]. .
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Valid when [PARA]AMRQosPerform[/PARA] is set to
NO RNC YES
Cell(ADD
CELLQOSHO)
20
RNC(SET
QOSHO)
None
None
Cell(ADD
CELLCMCF)
D64
RNC(SET
CMCF)
None
This parameter is valid only when
10 RNC [PARA]AFSetObj[/PARA] is set to NOPRIORITY.
This parameter is valid only when
[PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or
100 RNC COPPER.
80 Cell None
Cell(ADD
CELLQUALITY
MEAS)
64
RNC(SET
QUALITYMEAS
) None
1.When the value of [PARA]BT[/PARA] in [MML]ADD
IMAGRP[/MML] is selected, this parameter is valid.
2.On E1 working mode, the parameter
[PARA]DELAY[/PARA] and [PARA]DLYGB[/PARA]
must obey the following rules:
[PARA]DELAY[/PARA]*64*30/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*30/(53*8) + 3*2 +
[PARA]DLYGB[/PARA] < 1024.
On T1 working mode, they must obey the following rules:
[PARA]DELAY[/PARA]*64*24/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*24/(53*8) + 3*2 +
[PARA]DLYGB[/PARA] < 1024.
None IMA group
None RNC None
DRA_AQM_SWITCH:OFF,RNC
-18 Cell
None
5000 RNC None
5000 RNC None
If this parameter is set through both the [MML]ADD
RNC(SET DRD) CELLDRD[/MML] and [MML]SET DRD[/MML]
2 Cell(ADD commands, the parameter set through the [MML]ADD
CELLDRD) CELLDRD[/MML] command takes precedence over that
set through the [MML]SET DRD[/MML] command.
DR_RRC_DRD_SWITCH:ORNC None
6 RNC None
DRXCycleLenCoef needs to be set only when
[PARA]CNDomainId[/PARA] in [MML]ADD
CNDOMAIN[/MML] is set to CS_DOMAIN or
6 RNC PS_DOMAIN.
This parameter is valid when [PARA]DtxInvalid[/PARA]
None RNC is set to ON.
30 RNC None
4 RNC None
8 RNC None
2 RNC None
1 Cell None
When the value of [PARA]PATHCHK[/PARA] in
[MML]ADD IPPATH[/MML] is set to ENABLED, this
None IP Path parameter is valid.
16 RAB None
16 RAB
RATE_2048KBPS: not selected None
RATE_2880KBPS: not selected
RATE_5740KBPS: not selected
RNC None
This parameter is required when the
[PARA]TrchType[/PARA] parameter is set to
None RAB TRCH_EDCH_2MS or TRCH_EDCH_10MS.
This parameter is required when the
[PARA]TrchType[/PARA] parameter is set to
TRCH_EDCH_2MS or TRCH_EDCH_10MS.
This parameter is must larger than
None RAB [PARA]EdchTargetLittleRetransNum[/PARA].
This parameter is required when the
[PARA]TrchType[/PARA] parameter is set to
TRCH_EDCH_2MS or TRCH_EDCH_10MS.
This parameter is must less than
None RAB [PARA]EdchTargetLargeRetransNum[/PARA].
2 RAB None
2 RAB None
None RNC None
20 RNC None
10 Cell None
ON RNC None
None RNC
Negotiation with the peer network element is required.
0 SRB None
0 SRB None
0 SRB None
0 SRB None
Cell(ADD
10(ADD CELLMBMSFAC
CELLMBMSFACH) H)
None(SET MBMSFACH) RNC(SET
-30(SET MSCHFACH) MSCHFACH,SE
T MBMSFACH)
None
This parameter is required when the
[PARA]InterFreqInterRatMeasInd[/PARA] parameter is
set to INTER_FREQ, INTER_RAT or
INTER_FREQ_AND_INTER_RAT but not required when
the [PARA]InterFreqInterRatMeasInd[/PARA] parameter
REQUIRE Cell is set to NOT_REQUIRE.
0 Cell None
4 RNC None
When the value of [PARA]BRDTYPE[/PARA] is set to
FG2a, the value of [PARA]PTYPE[/PARA] is set to FE,
[PARA]AUTO[/PARA] in [MML]SET
ETHPORT[/MML] is set to DISABLE, the Flow Control
It must be consistent with th Ethernet port is valid.
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
Corresponding
optical port(SET When the value of
OPT) [PARA]FLOWCTRLSWITCH[/PARA] in [MML]SET
1(ADD
Ethernet OPT[/MML] is set to ON, the flow control parameter
ATMLOGICPORT,ADD
port(SET index should be set.
UNILNK,SET OPT,ADD
ETHPORT) When the value of
IMAGRP,ADD FRALNK)
MLPPP Group, [PARA]FLOWCTRLSWITCH[/PARA] is set to ON in
None(ADD
PPP Link(ADD [MML]SET ETHPORT[/MML], the FCINDEX should be
PORTFLOWCTRLPARA,
PPPLNK,ADD set.
SET ETHPORT)
MPGRP) 1.When the value of
0(ADD
UNILNK(ADD [PARA]FLOWCTRLSWITCH[/PARA] in [MML]ADD
IPLOGICPORT,ADD
UNILNK) IPLOGICPORT[/MML] is set to ON, this parameter
PPPLNK,ADD MPGRP)
LGC port(ADD should be set.
IPLOGICPORT,A 2.The type of the flow control parameter index must be IP.
DD
ATMLOGICPOR
T)
RNC(ADD
PORTFLOWCTR
LPARA)
PPP Link(ADD
PPPLNK)
16bit MLPPP Link,
PPP Link(ADD
MPLNK) None
12 RNC None
When the value of [PARA]USEFE[/PARA] in
[MML]ADD NODEBESN[/MML] is set to Enable, this
None RNC parameter should be set.
CFGMML-RNCX-
YYYYMMDDHHMMSS.t
RNC
xt(EXP CFGMML)
None(BKP DB) None
None RNC None
D3 RNC None
Cell(ADD
CELLINTERRAT
HOCOV)
D3
RNC(SET
INTERRATHOC
OV)
None
This parameter is required when the
[PARA]IsFixedMachsWinSize[/PARA] parameter is set to
D32 NodeB TRUE.
ON Cell None
Fractional
link(ADD
FRALNK)
Corresponding
optical port(SET
OPT) When the value of [PARA]FRALNKT[/PARA] in
PPP Link(ADD [MML]ADD FRALNK[/MML] is set to ON, this
PPPLNK) parameter is valid and the flow control parameter index
IMA group(ADD can be set.
IMAGRP) When the value of [PARA]BT[/PARA] in [MML]SET
LGC port(ADD OPT[/MML] is set to UOIa and the value of
ON
ATMLOGICPOR [PARA]LGCAPPTYPE[/PARA] is set to ATM, the flow
T,ADD control switch should be set.
IPLOGICPORT) When the value of
MLPPP Group, [PARA]FLOWCTRLSWITCH[/PARA] in [MML]ADD
PPP Link(ADD IMAGRP[/MML] is set to ON, this parameter is valid and
MPGRP) the flow control parameter index should be set.
UNILNK(ADD
UNILNK)
Ethernet
port(SET
ETHPORT)
[PARA]FWDHORSVBW[/PARA]/
[PARA]FWDCONGBW[/PARA]/
[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]TxBw[/PARA] is zero.
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
Fractional
0
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
UNILNK(ADD
UNILNK)
None
[PARA]FWDHORSVBW[/PARA]/
[PARA]FWDCONGBW[/PARA]/
[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD
IPPATH[/MML] must be all zero when
[PARA]TxBw[/PARA] is zero,or
[PARA]FWDHORSVBW[/PARA] <
[PARA]FWDCONGBW[/PARA] <
[PARA]FWDCONGCLRBW[/PARA] <
0 IP Path [PARA]TxBw[/PARA].
[PARA]FWDHORSVBW[/PARA]/
[PARA]FWDCONGBW[/PARA]/
[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]TxBw[/PARA] is zero.
[PARA]FWDHORSVBW[/PARA]/
[PARA]FWDCONGBW[/PARA]/
[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD
IPPATH[/MML] must be all zero when
[PARA]TxBw[/PARA] is zero,or
[PARA]FWDHORSVBW[/PARA] <
[PARA]FWDCONGBW[/PARA] <
[PARA]FWDCONGCLRBW[/PARA] <
0 IP Path [PARA]TxBw[/PARA].
[PARA]FWDHORSVBW[/PARA]/
[PARA]FWDCONGBW[/PARA]/
[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD
RSCGRP[/MML] must be all zero when
0 Transmission resou [PARA]TxBw[/PARA] is zero.
Either [PARA]GainFactorBetaC[/PARA] or
None Physical channel [PARA]GainFactorBetaD[/PARA] should be set to 15.
Either [PARA]GainFactorBetaC[/PARA] or
15 Physical channel [PARA]GainFactorBetaD[/PARA] should be set to 15.
[MMLWhen the value of [PARA]CHKTYPE[/PARA] in
[MML]STR IPCHK[/MML] is set to SBFD or ARP, the
None Ethernet port gateway IP address should be set.
None Cell None
When the value of [PARA]GCDF[/PARA] in
[MML]ADD GPS[/MML] is selected as DEG,
LATITUDE and LONGTITUDE should be set;
When the value of [PARA]GCDF[/PARA] in [MML]ADD
GPS[/MML] is selected as SEC, LATITUDESEC and
DEG RNC LONGITUDESEC should be set.
70 RNC None
70 RNC None
The following relationship must be satisfied:
[PARA]GoldMaxMode[/PARA] >=
Cell(ADD [PARA]SilverMaxMode[/PARA] >=
WBAMR_BITRATE_23.8 CELLAMRCWB) [PARA]CopperMaxMode[/PARA].
5K RNC(SET The following relationship must be satisfied:
AMRCWB) [PARA]GoldMaxMode[/PARA] >=
[PARA]SilverMaxMode[/PARA] >=
[PARA]CopperMaxMode[/PARA].
None Cell
This paramter is valid only when
[PARA]CellChoice[/PARA] is set to GSMCELL.
None Cell None
0 RNC None
5 Cell None
This parameter is valid only when
Cell(ADD
[PARA]UseOfHcs[/PARA] is set to USED.
GSMCELL,ADD
This paramter is valid only when
0 CELLHCS)
[PARA]UseOfHcs[/PARA] is set to USED.
RNC(ADD
This parameter is valid only when
NRNCCELL)
[PARA]UseOfHcs[/PARA] is set to TRUE.
100 RNC None
When the value of [PARA]ITFT[/PARA] in [MML]ADD
When the interface type is Iub, transmission typeTRMMAP[/MML]
is ATM, the parameter
is setistoUBR;
IUB transimssion
or IUR, this parameter
type is dual
is stack or IP, the parameter is A
When the interface type is Iur,RNC
transmission type valid.
is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF13.
30 RNC None
When the value of [PARA]ITFT[/PARA] in [MML]ADD
When the interface type is Iub, transmission typeTRMMAP[/MML]
is ATM or IP, the parameter
is set to IUB
is NULL;
or IUR,transimssion
this parameter
typeisis dual stack, the parameter is
When the interface type is Iur,RNC
transmission type valid.
is ATM or IP, the parameter is NULL.
100 RNC None
70 RNC None
When the value of [PARA]ITFT[/PARA] in [MML]ADD
When the interface type is Iub, transmission typeTRMMAP[/MML]
is ATM or dual stack,
is set
thetoparameter
IUB or IUR,
is RT_VBR;
this parameter
transimssion
is type is IP or Hybird IP,
When the interface type is Iur,RNC
transmission type valid.
is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43.
100 RNC None
When the value of [PARA]ITFT[/PARA] in [MML]ADD
When the interface type is Iub, transmission typeTRMMAP[/MML]
is ATM or IP, the parameter
is set to IUB
is NULL;
or IUR,transimssion
this parameter
typeisis dual stack, the parameter is
When the interface type is Iur,RNC
transmission type valid.
is ATM or IP, the parameter is NULL.
0 RNC None
30 RNC None
2 Cell None
5000 RNC None
HO_ALGO_HCS_SPEED_ES
RNC None
30 Cell None
5 RNC
None
5 RNC
None
90 RNC None
This parameter is valid only when
[PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or
100 RNC COPPER.
70 Cell None
0 Cell None
0 RNC None
5 Cell
1 Cell
4 Cell None
90 RNC None
This parameter is valid only when
[PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or
100 RNC COPPER.
Cell(ADD
CELLINTRAFRE
0 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
0 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
8 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
8 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
8 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
8 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTERFRE
QHOCOV)
4
RNC(SET This parameter is valid when
INTERFREQHO [PARA]InterFreqReportMode[/PARA] is set to
COV) EVENT_TRIGGER.
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
6
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
4
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
4
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
4
RNC(SET
INTERRATHOC
OV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
0
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
0
QHOCOV)
RNC(SET
INTERFREQHO This parameter is valid when
COV) [PARA]InterFreqReportMode[/PARA] is set to
PERIODICAL_REPORTING.
90 RNC None
When the value of [PARA]PATHCHK[/PARA] in
[MML]ADD IPPATH[/MML] is set to ENABLED, this
64 IP Path parameter is valid.
None RNC None
None Cell None
2 Cell None
This parameter is valid only when
2 Cell [PARA]QualMeas[/PARA] is set to CPICH_ECNO.
0 Cell
IMA group(ADD
IMALNK,ADD
IMAGRP)
None
Fractional
link(ADD
FRALNK)
None
None IMA group None
For AEUa, the sum of UNI/IMA/FRA can not exceed
IMA group(ADD 32,for AOUa, the sum of UNI/IMA/FRA on an optical
IMALNK) port can not exceed 63(E1)/84(T1)
None
IMA link(STR When the value of [PARA]PFMT[/PARA] in [MML]RST
IMATST) PFMM[/MML] is set to IMALNK, the value of
IMALNKN can be set.
IMA protocol Version 1.1 IMA group None
Cell(ADD
CELLINTERFRE
QHOCOV)
-14
RNC(SET
INTERFREQHO
COV)
80 Cell None
For low
speed(5km/h):Range is
D4~D6, the recommended
value is D5;
for middle
speed(50km/h):Range is
D3~D4, the recommended
value is D4; Cell(ADD
for high CELLMBDRINT
speed(120km/h):Range is ERFREQ,ADD
D2~D4, the recommended CELLINTERFRE
value is D2; QHONCOV,ADD
universal value:Range is CELLINTERFRE
D3~D6, the recommended QHOCOV)
value is D3.(SET RNC(SET
INTERFREQHOCOV,AD INTERFREQHO
D NCOV,SET
CELLINTERFREQHOCO INTERFREQHO
V) COV)
D3(ADD
CELLMBDRINTERFREQ,
SET
INTERFREQHONCOV,A
DD
CELLINTERFREQHONC
OV)
None
60(SET Cell(ADD
INTERFREQHONCOV,A CELLMBDRINT
DD ERFREQ,ADD
CELLINTERFREQHONC CELLINTERFRE
OV,SET QHONCOV,ADD
INTERFREQHOCOV,AD CELLINTERFRE
D QHOCOV)
CELLINTERFREQHOCO RNC(SET
V) INTERFREQHO
3(ADD NCOV,SET
CELLMBDRINTERFREQ INTERFREQHO
) COV)
None
None
80 Cell None
NO RNC None
NO RNC None
This parameter is valid when
[PARA]InterRatReportMode[/PARA] is set to
CSAMR_INTERRAT:OFF RNC EVENT_TRIGGER.
Cell(ADD
CELLINTERRAT
HOCOV)
-14
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT
HOCOV)
-100
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT
HOCOV)
-97
RNC(SET
INTERRATHOC
OV) The value of this parameter must be larger than
[PARA]InterRatCsThd2DRscp[/PARA].
None
Cell(ADD
CELLINTERRAT
HONCOV)
16
RNC(SET
INTERRATHON
COV) None
Cell(ADD
CELLINTERRAT
HOCOV)
-110
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT This parameter is valid when the OVERLAY_SWITCH is
HOCOV) ON The OVERLAY_SWITCH is in
-107 [PARA]HoSwitch[/PARA] in [MML]SET
RNC(SET
INTERRATHOC CORRMALGOSWITCH[/MML]; Also the value of this
OV) parameter must be larger than
[PARA]InterRatHThd2DRscp[/PARA].
Cell(ADD
CELLMBDRINT
60(SET
ERRAT,ADD
INTERRATHONCOV,AD
CELLINTERRAT
D
HONCOV,ADD
CELLINTERRATHONCO
CELLINTERRAT
V,SET
HOCOV)
INTERRATHOCOV,ADD
RNC(SET
CELLINTERRATHOCOV)
INTERRATHON
3(ADD
COV,SET
CELLMBDRINTERRAT)
INTERRATHOC
OV)
None
OFF Sub System None
Cell(ADD
CELLINTERRAT
HONCOV)
21
RNC(SET
INTERRATHON
COV)
None
Cell(ADD
CELLINTERRAT
HONCOV)
21
RNC(SET
INTERRATHON
COV)
None
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
D1000
HOCOV)
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT
HOCOV)
0
RNC(SET
INTERRATHOC
OV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
0
RNC(SET
INTERRATHOC
OV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
-15
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT
HOCOV)
-110
RNC(SET
INTERRATHOC
OV)
Cell(ADD
CELLINTERRAT
HOCOV)
-107
RNC(SET
INTERRATHOC
OV) The value of this parameter must be larger than
[PARA]InterRatR99PsThd2DRscp[/PARA].
Cell(ADD
CELLMBDRINT
PERIODICAL_REPORTI
ERRAT,ADD
NG(SET
CELLINTERRAT
INTERRATHOCOV,ADD
HOCOV)
CELLINTERRATHOCOV)
RNC(SET
EVENT_TRIGGER(ADD
INTERRATHOC
CELLMBDRINTERRAT)
OV)
None
1 RNC None
Cell(ADD
CELLINTRAFRE
-24 QHO)
RNC(SET
INTRAFREQHO)
Cell(ADD
CELLINTRAFRE
-115 QHO)
RNC(SET
INTRAFREQHO)
When [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA]
is set to MIN,the value of this parameter must satisfy the
following relationship:
[PARA]IntraFreqLdbPeriodTimerLen[/PARA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/PARA];
1800 RNC
When [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] is
set to TEN_MSEC,the value of this parameter must satisfy
the following relationship:
[PARA]IntraFreqLdbPeriodTimerLen[/PARA] x 1000 > 2
x [PARA]TenMsecForDlBasicMeas[/PARA].
None
Ethernet
port(ADD
In [MML]ADD IPOAPVC[/MML] The local [IP address]
ETHTRKIP,ADD
and the [Peer IP address] must be in the same network
ETHIP)
segment.
None RNC(ADD
When the value of [PARA]LNKT[/PARA] in [MML]ACT
IPOAPVC,ADD
VCLCC[/MML] is set to IPOAPVC, the IP address should
DEVIP)
be set.
Global(ACT
VCLCC)
None RNC None
The [PARA]IPADDR[/PARA] in [MML]ADD
IPPATH[/MML] can not be at one network segment with
the peer IP address of SCTPLNK or IPPATH whose local
IP address is device IP address of FG2a/GOUa in this
subrack;[PARA]IPADDR[/PARA] and
[PARA]PEERIPADDR[/PARA] in [MML]ADD
IPPATH[/MML] must be at one network segment;
([PARA]IPADDR[/PARA],
[PARA]PEERIPADDR[/PARA],
[PARA]PEERMASK[/PARA] in [MML]ADD
IPPATH[/MML]) conflicts with other IPPATH whose type
None IP Path is IUPS.
1 RNC None
1 NodeB None
1 NodeB None
300 RNC None
300 RNC None
32 RNC
None
NODEB_CREDIT_LDR_SWITCH:disabled.
LCG_CREDIT_LDR_SWITCH:disabled.
LC_CREDIT_LDR_SWITCH:disabled.
RNC None
13 Cell None
[PARA]LdrFirstPri[/PARA],
[PARA]LdrSecondPri[/PARA],
[PARA]LdrThirdPri[/PARA],
[PARA]LdrFourthPri[/PARA]are different between each
IUBLDR RNC other.
[PARA]LdrFirstPri[/PARA],
[PARA]LdrSecondPri[/PARA],
[PARA]LdrThirdPri[/PARA],
[PARA]LdrFourthPri[/PARA]are different between each
UULDR RNC other.
When [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA]
and [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] are
set to MIN,the value of this parameter must satisfy the
following relationship:
[PARA]LdrPeriodTimerLen[/PARA] > 2 x 60 x
[PARA]MinForUlBasicMeas[/PARA];
[PARA]LdrPeriodTimerLen[/PARA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/PARA];
10 RNC
When [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA]
and [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] are
set to TEN_MSEC,the value of this parameter must satisfy
the following relationship:
[PARA]LdrPeriodTimerLen[/PARA] x 1000 > 2 x
[PARA]TenMsecForUlBasicMeas[/PARA];
[PARA]LdrPeriodTimerLen[/PARA] x 1000 > 2 x
[PARA]TenMsecForDlBasicMeas[/PARA].
[PARA]LdrFirstPri[/PARA],
[PARA]LdrSecondPri[/PARA],
[PARA]LdrThirdPri[/PARA],
[PARA]LdrFourthPri[/PARA]are different between each
CREDITLDR RNC other.
[PARA]LdrFirstPri[/PARA],
[PARA]LdrSecondPri[/PARA],
[PARA]LdrThirdPri[/PARA],
[PARA]LdrFourthPri[/PARA]are different between each
CODELDR RNC other.
1.The parameter is used in command [MML]ADD
ADJMAP [/MML] as loadeq table index for
gold,silver,and bronze users.
2.When TRANST of ADJNODE is dual stack or hybird
None RNC IP,loadeq can be added.
The load EQ table index is configured by setting the value
of [PARA]LEI[/PARA] in [MML]ADD
None Adjacent Node LOADEQ[/MML].
The load EQ table index is configured by setting the value
of [PARA]LEI[/PARA] in [MML]ADD
None Adjacent Node LOADEQ[/MML].
The load EQ table index is configured by setting the value
of [PARA]LEI[/PARA] in [MML]ADD
None Adjacent Node LOADEQ[/MML].
RNC(ADD
This is a parameter in [MML]ADD OPC[/MML].
M3LE)
None The [PARA]LENO[/PARA] field in [MML]ADD
M3UA(ADD
M3LE[/MML]
M3DE)
ON RNC None
0 Ethernet port None
B1111 RNC
None
When the value of [PARA]LS[/PARA] in [MML]SET
E1T1[/MML] is set to SINGLE,the value range of
[PARA]LNKT[/PARA] is
E1_DOUBLE_FRAME,E1_CRC4_MULTI_FRAME,T1_
SUPER_FRAME,T1_EXTENDED_SUPER_FRAME.
When the value of [PARA]LS[/PARA] in [MML]SET
E1T1[/MML] is set to ALL,the value range of
[PARA]LNKT[/PARA] is controlled by
[PARA]WORKMODE[/PARA]. When
[PARA]WORKMODE[/PARA] is E1_UNBA,E1_BA,or
E1,the value range of [PARA]LNKT[/PARA] is
E1_DOUBLE_FRAME,E1_CRC4_MULTI_FRAME.
When the value of [PARA]WORKMODE[/PARA] in
[MML]SET E1T1[/MML] is set to T1,the value range of
[PARA]LNKT[/PARA] is
T1_SUPER_FRAME,T1_EXTENDED_SUPER_FRAME
E1_CRC4_MULTI_FRAMEE1T1 link .
Communication
Link(ACT
None
VCLCC)
VCL(LOP VCL) None
The parameter must not be the same as any IP address that
None RNC has been configured in the RNC.
None MLPPP Group, ML None
None Ethernet port None
None NodeB
None
None SCTP None
None SCTP None
When the value of [PARA]MODE[/PARA] in
[MML]ADD SCTPLNK[/MML] is set to Client, this
None SCTP parameter can be modified.
None RNC None
This parameter determines whether
[PARA]LOGPORTSN[/PARA] and
[PARA]LOGPORTNO[/PARA] in [MML]ADD
None SCTP SCTPLNK[/MML] are valid.
When the value of [PARA]LOGPORTFLAG[/PARA] in
[MML]ADD SCTPLNK[/MML] is set to ON, this
None SCTP parameter is valid.
When the value of [PARA]LOGPORTFLAG[/PARA] in
[MML]ADD SCTPLNK[/MML] is set to ON, this
None SCTP parameter is valid.
None
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
1 LGC port parameter should be set.
When the value of [PARA]LCARRYT[/PARA] in
[MML]ADD VPCLCX[/MML] is set to NCOPT, this
None RNC parameter should be set.
LGC port(ADD
IPLOGICPORT) When the value of [PARA]CARRYFLAG[/PARA] in
None
IP Path(ADD [MML]ADD IPPATH[/MML] is set to IP LGCPORT, this
IPPATH) parameter is valid.
1 RNC None
1 RNC None
None RAB None
None RAB None
1.When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
parameter should be set.
2.[PARA]MINBW[/PARA] must be less than
None LGC port [PARA]MAXBW[/PARA].
The value of this parameter must satisfy the following
relationship:
[PARA]MaxCAPSLowLoad[/PARA] >
[PARA]MaxCAPSMidLoad[/PARA] >
150 RNC [PARA]SharingOutCAPSMidLoad[/PARA].
The value of this parameter must satisfy the following
relationship:
[PARA]MaxCAPSLowLoad[/PARA] >
[PARA]MaxCAPSMidLoad[/PARA] >
100 RNC [PARA]SharingOutCAPSMidLoad[/PARA].
4 SAAL None
Cell(ADD
CELLINTRAFRE
3 QHO)
RNC(SET
INTRAFREQHO)
None
D15 Transport channel None
49 RNC None
16 RNC None
64 Cell None
20 Cell None
3 RNC
None
1 NodeB None
When the value of [PARA]SAALLNKT[/PARA] is set to
0 SAAL NNI, this parameter is valid.
75 Cell None
12 RNC None
430 Cell
None
24 Cell None
24 Cell None
24 Cell None
24 Cell None
1 Cell None
FALSE Cell
None
0 Cell
None
1 Cell None
OFF RNC None
Cell(ADD
CELLMBMSSA)
None RNC(ADD
SAMBMSPARA,
ADD MBMSSA)
None
None RNC None
ON RNC None
Cell(ADD
CELLMBMSPAR
A)
PTM RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None
When the value of [PARA]ST[/PARA] in [MML]ADD
ATMTRF[/MML] is set to RTVBR or NRTVBR, this
1000 SAALLNK/AAL2PATH
parameter should be set.
RNC(SET
MBMSPERF,AD
D
IMSISNAMAP,A
DD
None
LASNAMAP,AD
D
CNOPERATOR)
Cell(ADD
GSMCELL)
None
3 RNC None
7 RNC None
1 RNC None
When the value of [PARA]MPTYPE[/PARA] in
[MML]ADD MPGRP[/MML] is set to MCPPP, this
None MLPPP Group parameter should be set.
When the value of [PARA]ST[/PARA] in [MML]ADD
ATMTRF[/MML] is set to UBR_PLUS, the Minimum cell
None SAALLNK/AAL2PATH
rate should be set.
Cell(ADD
CELLINTERRAT
HOCOV)
AUTO
RNC(SET
INTERRATHOC
OV)
This parameter is valid when
[PARA]InterRatReportMode[/PARA] is set to
EVENT_TRIGGER.
-7 Cell None
This paramter is valid only when
[PARA]STTDSupInd[/PARA] of [MML]ADD
FALSE Cell CELLSETUP[/MML] is set to STTD_Supported.
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
None LGC port parameter should be set.
D14 Transport channel None
NO RNC None
OFF RNC None
None Port None
60 Cell
40 Cell
Cell(ADD
CELLMBMSFAC
80 H)
RNC(SET
MBMSFACH)
Cell(ADD
CELLMBMSFAC
50 H)
RNC(SET
MBMSFACH)
20 Cell
The value of this parameter must satisfy the following
relationship:
[PARA]MtchMaxSf[/PARA] >
[PARA]MtchRsvSf[/PARA] .
16 Cell
None Cell None
When the value of [PARA]MTRLGY[/PARA] in
[MML]ADD GPS[/MML] is selected as MET, the
ALTITUDE should be set;
When the value of [PARA]MTRLGY[/PARA] in
[MML]ADD GPS[/MML] is selected as IMP, the
MET RNC ALTITUDEIMP should be set.
Ethernet
port(SET
1500 ETHPORT)
SCTP(ADD
SCTPLNK) None
PPP Link(ADD
PPPLNK)
1000(ADD PPPLNK)
MLPPP Group, When the value of [PARA]PPPMUX[/PARA] in
None(ADD MPGRP)
PPP Link(ADD [MML]ADD MPGRP[/MML] is set to ENABLE, this
MPGRP) parameter should be set.
When the value of [PARA]MODE[/PARA] in
[MML]STR IPCHK[/MML] is set to REDPORT, the
None Ethernet port backup port mask should be set.
When the value of [PARA]SAALLNKT[/PARA] is set to
100 SAAL NNI, this parameter is valid.
3 RNC None
3 RNC None
3 RNC None
1 RNC None
D1 RNC
None
D1 RNC None
D1 RNC None
RNC(ADD
OPC,ADD
N7DPC,ADD
M3RT,ADD
M3LNK,ADD
M3LKS,ADD
M3LE,ADD
MTP3LKS,ADD
None
MTP3RT)
Adjacent
Node(ADD
ADJNODE)
MTP3(ADD
MTP3LNK)
M3UA(ADD
M3DE)
None
The value of this parameter must be set to meet the
following conditions:
0 Transport channel [PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA].
The value of this parameter must be set to meet the
following conditions:
0 Transport channel [PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA].
20 RNC None
58080 The SCTP links of None
When the value of [PARA]NBTRANTP[/PARA] in
[MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or
None RNC ATMANDIPTRANS_IP, this parameter should be set.
When the value of [PARA]NBTRANTP[/PARA] in
[MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or
None RNC ATMANDIPTRANS_IP, this parameter should be set.
20 RNC None
When the value of [PARA]NBTRANTP[/PARA] in
[MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or
None RNC ATMANDIPTRANS_IP, this parameter should be set.
When the value of [PARA]NBTRANTP[/PARA] in
[MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or
None RNC ATMANDIPTRANS_IP, this parameter should be set.
None RNC None
When the value of [PARA]USENBLB2[/PARA] in
[MML]ADD NODEBESN[/MML] is set to Enable, this
None RNC parameter should be set.
None Cell None
NBM_LDC_MATCH_UE_OCell None
ALGORITHM_DEPEND_OCell None
None Cell None
PRIORITY2&PRIORITY3&RNC None
60 RNC None
None Cell
None
This paramter is valid only when
[PARA]DynShutDownType[/PARA] is set to
20 Cell ConditionalShutDown.
None RNC
None
NC0 Cell None
Cell(ADD
CELLMBMSPAR
A)
4 RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None
ON RNC None
5 Cell None
NodeB(ADD
NODEB)
Adjacent
Node(ADD
When the value of [PARA]NODET[/PARA] in
ADJNODE)
[MML]ADD ADJNODE[/MML] is set to IUB, this
Cell(SET
parameter is valid.
None MRSCOPECTRL
When the value of [PARA]SelectType[/PARA] in
)
[MML]STR NODEBDETECT[/MML] is set to SINGLE,
RNC(STR
this parameter is valid.
NODEBDETECT
,ADD
NODEBESN,AD
D NODEBIP)
30 NodeB None
0 Cell None
50 Cell None
FALSE Cell
None
Cell(ADD
CELLMBMSPAR
A)
3 RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None
None
Services carried
on the network 1. If the original ATM address of the NodeB is configured
element with the with the route through [MML]ADD AAL2RT[/MML], the
specific ATM parameter cannot be modified.
None
address.(ADD 2. If the original ATM address of the NodeB is configured
AAL2RT) with the route in the AAL2RT table, the parameter cannot
NodeB(ADD be modified.
NODEB)
4 Cell None
-4 Cell None
4 Cell None
-4 Cell None
2 Cell None
-2 Cell None
When [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA]
and [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] are
set to MIN,the value of this parameter must satisfy the
following relationship:
[PARA]OlcPeriodTimerLen[/PARA] > 2 x 60 x 1000 x
[PARA]MinForUlBasicMeas[/PARA];
[PARA]OlcPeriodTimerLen[/PARA] > 2 x 60 x 1000 x
[PARA]MinForDlBasicMeas[/PARA];
3000 RNC
When [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA]
and [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] are
set to TEN_MSEC,the value of this parameter must satisfy
the following relationship:
[PARA]OlcPeriodTimerLen[/PARA] > 2 x
[PARA]TenMsecForUlBasicMeas[/PARA];
[PARA]OlcPeriodTimerLen[/PARA] > 2 x
[PARA]TenMsecForDlBasicMeas[/PARA].
IP Path(ADD
IPPATHBIND,A
None DD IPPATH)
IP path(ACT
IPPM) None
When the value of [PARA]ANI[/PARA] in [MML]ADD
IPPATH[/MML] is set to IUPS,the value of
QOS IP Path [PARA]PATHT[/PARA] must be set to RT/NRT/QOS.
When the value of [PARA]BT[/PARA] in [MML]LOD
PATCH[/MML] DPUb, the value of
None RNC [PARA]PATTYPE[/PARA] should be set.
PC_AMR_MODE_INDUCE_B
RNC None
5 RNC None
1000 Ethernet port None
None
The parameter must not be the same as any IP address that
None RNC has been configured in the RNC.
None MLPPP Group, ML None
Invalid Cell
None
([PARA]IPADDR[/PARA],
[PARA]PEERIPADDR[/PARA],
[PARA]PEERMASK[/PARA] in [MML]ADD
IPPATH[/MML]) conflicts with other IP Path whose type
255.255.255.255 IP Path is IUPS.
Cell(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
30
RNC(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
None
30 Cell None
Cell(ADD
CELLINTERFRE
QHOCOV)
1
RNC(SET
INTERFREQHO This parameter is valid when
COV) [PARA]InterFreqReportMode[/PARA] is set to
EVENT_TRIGGER.
Cell(ADD
CELLINTERFRE
QHONCOV)
4
RNC(SET
INTERFREQHO
NCOV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
1
RNC(SET
INTERRATHOC This parameter is valid when
OV) [PARA]InterRatReportMode[/PARA] is set to
EVENT_TRIGGER.
Cell(ADD
CELLINTERRAT
HONCOV)
4
RNC(SET
INTERRATHON
COV)
None
Cell(ADD
CELLINTRAFRE
D16 QHO)
RNC(SET
INTRAFREQHO) None
Cell(ADD
CELLINTRAFRE
D16 QHO)
RNC(SET
INTRAFREQHO) None
Cell(ADD
CELLINTRAFRE
D64 QHO)
RNC(SET
INTRAFREQHO) None
150 RNC
None
This parameter is valid when
[PARA]AccessServiceClass[/PARA] is set to
None Physical channel ASC2,ASC3,ASC4,ASC5,ASC6 or ASC7.
PPP Link(ADD
PPPLNK)
Enable MLPPP Link,
PPP Link(ADD
MPLNK) None
When the value of [PARA]ISQOSPATH[/PARA] in
[MML]ACT IPPM[/MML] is set to YES, this parameter
None IP path should be set.
None
None Cell None
10 Physical channel None
-7 Cell None
None Ethernet port None
10 RNC None
Ethernet
port(ADD
ETHIP,ADD
ETHREDPORT,A
CT
ETHPORT,SET
ETHPORT)
When the value of [PARA]PS[/PARA] in [MML]SET
Port(SET
OPT[/MML] is SINGLE, the port number should be set.
MSP,SET
When the value of [PARA]LS[/PARA] in [MML]SET
MSPCMD)
COPTLNK[/MML] is set to PORT or SINGLE, the
RNC(SWP
parameter [PARA]PN[/PARA] should be set.
ETHPORT,CLR
When the value of [PARA]CHKTYPE[/PARA] in
MSPREP)
[MML]STR IPCHK[/MML] is set to SBFD or ARP, the
None Loopback optical
Ethernet port number should be set.
port(SET
There cannot be IP address or port controller configured
OPTLOP)
on the port and the backup port .
Optical port(ACT
If the interface board is GOUa, the parameter
MSP)
[PARA]PN[/PARA] can only be 0 or 1.
Corresponding
For FG2a board, if the type of port 0 is GE, the PN cannot
optical port(SET
be 1~3; if the type of port 4 is GE, the PN cannot be 5~7.
OPT)
Optical Port(SET
COPTLNK)
LGC port(ADD
IPLOGICPORT)
NodeB(ADD
CCP)
50 RNC
UNI: 750
NNI: 100 SAAL None
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
D500
QHOCOV)
RNC(SET
INTERFREQHO
COV) This parameter is valid when
[PARA]InterFreqReportMode[/PARA] is set to
PERIODICAL_REPORTING.
ON RNC None
1 RNC None
1 RNC None
1 RNC None
1 RNC None
1 RNC None
None
30 RNC None
Cell(ADD
This parameter is valid when
CELLINTERRAT
[PARA]NcovHoOn2GldInd[/PARA] in [MML]SET
HONCOV)
60 INTERRATHONCOV[/MML] is set to ON.
RNC(SET
This parameter is valid when
INTERRATHON
[PARA]NcovHoOn2GldInd[/PARA] is set to ON.
COV)
30 RNC None
100 RNC None
90 RNC None
TRUE(SET
DSACAUTOALGO)
None(ADD RNC
CELLDSACMANUALPA
RA) When [PARA]DsacAutoSwitch[/PARA] is set to ON,the
parameter need configure;else,need not configure.
ON RNC None
32 RNC
None
When [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA]
is set to MIN,the value of this parameter must satisfy the
following relationship:
[PARA]PucPeriodTimerLen[/PARA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/PARA];
1800 RNC
When [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] is
set to TEN_MSEC,the value of this parameter must satisfy
the following relationship:
[PARA]PucPeriodTimerLen[/PARA] x 1000 > 2 x
[PARA]TenMsecForDlBasicMeas[/PARA].
10 RNC None
From [PARA]Q0MINDSCP[/PARA] to
[PARA]Q4MINDSCP[/PARA] must obey the following
rules: [PARA]Q0MINDSCP[/PARA] >
[PARA]Q1MINDSCP[/PARA] >
[PARA]Q2MINDSCP[/PARA] >
[PARA]Q3MINDSCP[/PARA] >
None Port Queue [PARA]Q4MINDSCP[/PARA].
From [PARA]Q0MINDSCP[/PARA] to
[PARA]Q4MINDSCP[/PARA] must obey the following
rules: [PARA]Q0MINDSCP[/PARA] >
[PARA]Q1MINDSCP[/PARA] >
[PARA]Q2MINDSCP[/PARA] >
[PARA]Q3MINDSCP[/PARA] >
None Port Queue [PARA]Q4MINDSCP[/PARA].
From [PARA]Q0MINDSCP[/PARA] to
[PARA]Q4MINDSCP[/PARA] must obey the following
rules: [PARA]Q0MINDSCP[/PARA] >
[PARA]Q1MINDSCP[/PARA] >
[PARA]Q2MINDSCP[/PARA] >
[PARA]Q3MINDSCP[/PARA] >
None Port Queue [PARA]Q4MINDSCP[/PARA].
From [PARA]Q0MINDSCP[/PARA] to
[PARA]Q4MINDSCP[/PARA] must obey the following
rules: [PARA]Q0MINDSCP[/PARA] >
[PARA]Q1MINDSCP[/PARA] >
[PARA]Q2MINDSCP[/PARA] >
[PARA]Q3MINDSCP[/PARA] >
None Port Queue [PARA]Q4MINDSCP[/PARA].
From [PARA]Q0MINDSCP[/PARA] to
[PARA]Q4MINDSCP[/PARA] must obey the following
rules: [PARA]Q0MINDSCP[/PARA] >
[PARA]Q1MINDSCP[/PARA] >
[PARA]Q2MINDSCP[/PARA] >
[PARA]Q3MINDSCP[/PARA] >
None Port Queue [PARA]Q4MINDSCP[/PARA].
Cell(ADD
-18(ADD CELLSELRESEL
CELLSELRESEL) )
None(ADD NRNCCELL) RNC(ADD
NRNCCELL)
This parameter is valid only when
[PARA]QqualminInd[/PARA] is set to TRUE.
Cell(ADD
-58(ADD CELLSELRESEL
CELLSELRESEL) )
None(ADD NRNCCELL) RNC(ADD
NRNCCELL)
This parameter is valid only when
[PARA]QrxlevminInd[/PARA] is set to TRUE.
Cell(ADD
CELLSELRESEL
FALSE )
RNC(ADD This parameter is valid only when
NRNCCELL) [PARA]QrxlevminInd[/PARA] is set to TRUE.
5 RNC None
RAB(ADD
TYPRABOLPC)
(ADD
TYPRABBASIC,
ADD
TYPRABHSPA,A
DD
None
TYPRABRLC,A
DD
TYPRABDCCC
MC)
RNC(ADD
TYPRABQUALI
TYMEAS)
None
5 RNC None
RNC(ADD
NRNCCELL,AD
D
QUICKCELLSE
None TUP,ADD
CELLSETUP,AD
D RAC)
Cell(ADD
GSMCELL) This paramter is valid only when
[PARA]CfgRacInd[/PARA] is set to REQUIRE.
68 Cell None
None RNC
None
RNC(SET
REDIRECTION)
None Cell(ADD
CELLREDIRECT
ION)
None
Special frequencies: {1037, 1062}
Band7
Common frequencies: [2237-2563]
Special frequencies: {2587, 2612, 2637, 2662, 2687, 2712,
2737, 2762, 2787, 2812, 2837, 2862, 2887, 2912}
Band8
Common frequencies: [2937-3088]
Special frequencies: none
Band9
Common frequencies: [9237-9387]
Special frequencies: none
BandIndNotUsed:
[0-16383]
If this parameter is set through both the [MML]ADD
CELLDRD[/MML] and [MML]SET DRD[/MML]
commands, the parameter set through the [MML]ADD
RNC(SET
CELLDRD[/MML] command takes precedence over that
REDIRECTION,
set through the [MML]SET DRD[/MML] command.
SET DRD)
The value range of this parameter depends on the setting
None Cell(ADD
of the [PARA]ReDirBandInd[/PARA] parameter, as shown
CELLREDIRECT
below:
ION,ADD
Band1
CELLDRD)
Common frequencies: [10562-10838]
Special frequencies: none
Band2
Common frequencies: [9662-9938]
Special frequencies: {412, 437, 462, 487, 512, 537, 562,
587, 612, 637, 662, 687}
Band3
Common frequencies: [1162-1513]
Special frequencies: none
Band4
Common frequencies: [1537-1738]
Special frequencies: {1887, 1912, 1937, 1962, 1987, 2012,
2037, 2062, 2087}
Band5
Common frequencies: [4357-4458]
Special frequencies: {1007, 1012, 1032, 1037, 1062,
Band7:
Common frequencies: [2012-2338]
Special frequencies: {2362, 2387, 2412, 2437, 2462, 2487,
2512, 2537, 2562, 2587, 2612, 2637, 2662, 2687}
Band8:
Common frequencies: [2712-2863]
Special frequencies: none
Band9:
Common frequencies: [8762-8912]
Special frequencies: none
BandIndNotUsed:
[0-16383]
If this parameter is set through both the [MML]ADD
CELLDRD[/MML] and [MML]SET DRD[/MML]
commands, the parameter set through the [MML]ADD
RNC(SET CELLDRD[/MML] command takes precedence over that
REDIRECTION, set through the [MML]SET DRD[/MML] command. This
SET DRD) parameter is required only when the
None Cell(ADD [PARA]ReDirUARFCNUplinkInd[/PARA] parameter is
CELLREDIRECT set to TRUE.
ION,ADD The value range of this parameter depends on the setting
CELLDRD) of the [PARA]ReDirBandInd[/PARA] parameter, as shown
below:
Band1:
Common frequencies: [9612-9888]
Special frequencies: none
Band2:
Common frequencies: [9262-9538]
Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187,
212, 237, 262, 287}
Band3:
Common frequencies: [937-1288]
Special frequencies: none
Band4:
Common frequencies: [1312-1513]
Special frequencies: {1662, 1687, 1712, 1737, 1762, 1787,
1812, 1837, 1862}
ON RNC None
IP Route(ADD
IPRT)
SAALLNK/AAL
3PATH/IPOAPV
None
C/VPCLCX using
this ATM traffic
record
index(ADD
ATMTRF)
None
None RNC
None
0 RNC None
300 RNC None
Cell(ADD
CELLINTRAFRE
D4000 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D4000 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D1000 QHO)
RNC(SET
INTRAFREQHO)
None
RESERVED_SWITCH_0_BIT
RNC None
RESERVED_SWITCH_1_BIRNC None
0 RNC None
0 RNC None
None
RNC(ADD
GPS,ADD
RNCBASIC,RST
IUR,ADD
GSMNCELL,AD
D
INTERFREQNC
None ELL,ADD
INTRAFREQNC
ELL,ADD
CELLINTRAFRE
QHO)
Cell(ADD
SMLCCELL)
(RST RNC)
None
None Subsystem None
0 RNC None
None RNC None
None RNC None
1.When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
parameter should be set.
2.[PARA]RECOVERTHD[/PARA] must be larger than
20 LGC port [PARA]RPTTHD[/PARA].
90 RNC None
4 RNC None
5000 RNC None
Cell(ADD
CELLALGOSWI
TCH)
NodeB(ADD
None NODEBALGOPA
RA)
RNC(SET
CACALGOSWIT
CH)
None
0 RNC None
None RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
0 RNC None
None RNC None
Cell(ADD
CELLALGOSWI
0(ADD TCH)
NODEBALGOPARA,ADD NodeB(ADD
CELLALGOSWITCH) NODEBALGOPA
None(SET RA)
CACALGOSWITCH) RNC(SET
CACALGOSWIT
CH)
None
0 RNC None
None RNC None
Cell(ADD
CELLALGOSWI
0(ADD TCH)
NODEBALGOPARA,ADD NodeB(ADD
CELLALGOSWITCH) NODEBALGOPA
None(SET RA)
CACALGOSWITCH) RNC(SET
CACALGOSWIT
CH)
None
0 RNC None
None RNC None
0 RNC None
None RNC None
0 RNC None
None RNC None
0 RNC None
None RNC None
0 RNC None
None RNC None
0 RNC None
None RNC None
0 RNC None
None Port None
4294967295 RNC
None
When [PARA]RTCPSwitch[/PARA] in [MML]ADD
CNNODE[/MML] is set to ON, RTCPBWRatio needs to
1 RNC be set.
D0 RNC None
D0 RNC None
D0 RNC None
D0 RNC None
12 SCTP None
25 SCTP None
The value to be set should be larger than the value of
[PARA]RTOMIN[/PARA] in [MML]ADD
SCTPLNK[/MML] but smaller than the value of
1000 SCTP [PARA]RTOMAX[/PARA].
The value to be set should be larger than the value of
[PARA]RTOMIN[/PARA] in [MML]ADD
3000 SCTP SCTPLNK[/MML].
The value to be set should be smaller than the value of
[PARA]RTOMAX[/PARA] in [MML]ADD
1000 SCTP SCTPLNK[/MML].
None Services carried on None
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
5 LGC port parameter should be set.
When the value of [PARA]BWADJ[/PARA] in
[MML]ADD IPLOGICPORT[/MML] is set to ON, this
5 LGC port parameter should be set.
None LGC port None
None IP Path None
1172 RNC
876 RNC
When [PARA]CARRYLNKT[/PARA] is SAAL or
None SAAL SAAL-SCTP, this parameter is valid.
When[PARA]CARRYLNKT[/PARA] is SAAL or SAAL-
None SAAL SCTP, this parameter is valid.
When the value of [PARA]LNKT[/PARA] in [MML]ACT
VCLCC[/MML] is set to SAALLNK, the SAAL link
number should be set.
None SAAL
When the value of [PARA]LNKT[/PARA] in [MML]LOP
VCL[/MML] is set to SAALLNK, the value of
[PARA]SAALLNKN[/PARA] should be set.
When the value of [PARA]NODET[/PARA] in
Adjacent [MML]ADD ADJNODE[/MML] is set to IUB, and the
Node(ADD value of [PARA]IsROOTNODE[/PARA] in [MML]ADD
None ADJNODE) ADJNODE[/MML] is set to YES, or the value of
MTP3(ADD [PARA]NODET[/PARA] in [MML]ADD
MTP3LNK) ADJNODE[/MML] is set to UNI_AAL2SWITCH, this
parameter is valid.
SCTP(ADD
NCP,ADD The parameter [PARA]SCTPLNKN[/PARA] in
CCP,ADD [MML]ADD SCTPLNK[/MML]
None
SCTPLNK) When [PARA]CARRYLNKT[/PARA] is SCTP or SAAL-
RNC(ADD SCTP, this parameter is valid.
M3LNK)
Cell(ADD
CELLMBMSFAC
H,ADD
CELLMBMSSC
CPCH)
None
RNC(SET
MTCH,SET
MBMSFACH,SE
T
MBMSSCCPCH)
None
When the value of [PARA]NODET[/PARA] in
[MML]ADD ADJNODE[/MML] is set to IUPS, this
None Adjacent Node parameter is valid.
The value of this parameter must satisfy the following
relationship:
[PARA]MaxCAPSLowLoad[/PARA] >
[PARA]MaxCAPSMidLoad[/PARA] >
10 RNC [PARA]SharingOutCAPSMidLoad[/PARA].
3 RNC None
60 RNC None
Cell(ADD
-24(SET CELLINTRAFRE
INTRAFREQHO,ADD QHO)
CELLINTRAFREQHO) RNC(SET
-20(SET SMLC) SMLC,SET
INTRAFREQHO)
None
None RNC None
TRUE Cell
None
FALSE Cell
None
RNC(ADD
M3LNK,ADD The parameter [PARA]SIGLKSX[/PARA] in
M3LKS,ADD [MML]ADD MTP3LKS[/MML]
M3RT,ADD The [PARA]SIGLKSX[/PARA] field in [MML]ADD
None
MTP3RT,ADD M3LKS[/MML]
MTP3LKS) The parameter [PARA]SIGLKSX[/PARA] in
MTP3(ADD [MML]ADD M3LKS[/MML]
MTP3LNK)
Subsystem(ADD
CBSADDR)
Sub System(SET
NCELLDETECT
None SWITCH)
RNC(ADD
IURCOMMSCCP
)
(ADD NODEB)
None
None Cell None
None RNC None
None RNC None
None RNC None
When the value of [PARA]LNKT[/PARA] in [MML]LOP
VCL[/MML] is set to SAALLNK, the value of
None VCL [PARA]SN[/PARA] should be set.
Subrack(ADD
ETHREDPORT,A
CT MSP)
RNC(SET
None
MSP,SWP
ETHPORT,CLR
MSPREP,SET
MSPCMD)
This parameter is only valid to
AOUa/UOIa_ATM/POUa/UOIa_IP board.
When the value of [PARA]INHT[/PARA] in [MML]INH
BRD[/MML] is set to LOGIC,the value range of
[PARA]SN[/PARA] is 0, 2, 4, 8 to 27.
When the value of [PARA]INHT[/PARA] in [MML]INH
BRD[/MML] is set to PHYSICAL,the value range of
None Services carried on [PARA]SN[/PARA] is 0 to 5, 8 to 27.
When the value of [PARA]UINT[/PARA] in [MML]UIN
BRD[/MML] is set to LOGIC, the slot number is required
and the value range is 0, 2, 4, 8 to 27.
When the value of [PARA]UINT[/PARA] in [MML]UIN
BRD[/MML] is set to PHYSICAL, the slot number is
None RNC required and the value range is 0 to 5, 8 to 27.
WNF RNC
None
When the value of [PARA]BRDTYPE[/PARA] is set to
FG2a,the value of [PARA]PTYPE[/PARA] is set to FE,
[PARA]AUTO[/PARA] in [MML]SET
ETHPORT[/MML] is set to DISABLE,the FE port rate
100M Ethernet port can be set.
45 Cell
90 RNC None
Subsystem(ADD
CBSADDR)
Sub System(SET
NCELLDETECT
None SWITCH)
RNC(ADD
IURCOMMSCCP
)
(ADD NODEB)
None
RNC(ACT
CRC,SET
ONLINE,SET
OFFLINE,FMT
None
DATA)
Cell(SET
MRSCOPECTRL
) None
None RNC None
QUEUEMAP,SW
P
ETHPORT,ULD
RSTINFO,SET
OPTLOP,LOD
PATCH,STR
E1T1TST,SET
E1T1LOP,STR
CPUUSAGETST,
ULD
LOGTOBAM,CL When the value of [PARA]OT[/PARA] in [MML]LOD
R MSPREP,SET PATCH[/MML] is set to SCUa, SPUa, DPUb, PEUa,
MSPCMD,SWP AEUa, FG2a, GOUa, AOUa, POUa, UOIa, or ALL, the
BRD,ADD BRD) value of [PARA]SRN[/PARA] should be set.
(ADD When the value of [PARA]NODET[/PARA] in
PPPLNK,STR [MML]ADD ADJNODE[/MML] is set to
IMATST,CLR UNI_AAL2SWITCH, this parameter is valid.
BRD) When the value of [PARA]LNKT[/PARA] in [MML]LOP
None Cell(LOP E1T1) VCL[/MML] is set to SAALLNK, the value of
Ethernet [PARA]SRN[/PARA] should be set.
port(STR When the value of [PARA]SRT[/PARA] in [MML]SET
IPCHK,ADD CLK[/MML] is set to RBS, the value of
ETHTRKIP,ADD [PARA]SRN[/PARA] should be set.
ETHTRKLNK,A When the value of [PARA]LNKT[/PARA] in [MML]ACT
DD VCLCC[/MML] is set to SAALLNK, the subrack number
ETHTRK,PING should be set.
MAC,ACT none
ETHCC,ADD
ETHMEP,ADD
ETHMA,ADD
ETHMD,ACT
ETHOAMAH,A
DD
IPRTBIND,ADD
ETHIP,ACT
ETHPORT,ADD
IPRT,PING IP)
When the value of [PARA]SRT[/PARA] in [MML]SET
CLK[/MML] is set to RBS, the value of
None board [PARA]SRN[/PARA] should be set.
None RNC None
None SAAL None
60 RNC None
5 RNC None
30 RNC None
SRNSR_DSCR_IUR_RESR RNC None
60 RNC None
[PARA]SSCPUMAXUSAGEALMTHD[/PARA] must be
greater than
70 board [PARA]SSCPUAVEUSAGEALMTHD[/PARA]
None RAB None
1.When the value of [PARA]BT[/PARA] in [MML]SET
CPUTHD[/MML] is set to DPUb, the value of
[PARA]SSDSPAVEUSAGEALMTHD[/PARA] should be
set.
2.[PARA]SSDSPAVEUSAGEALMTHD[/PARA] must be
smaller than
80 DSP [PARA]SSDSPMAXUSAGEALMTHD[/PARA].
None RNC
None
RNC(ULD
RSTINFO,STR
CPUUSAGETST,
ADD
RNCCBCPUID)
None
Cell(SET
MRSCOPECTRL
)
NodeB(ADD
NODEB)
None
When the value of [PARA]DST[/PARA] in [MML]SET
03&00&00 RNC TZ[/MML] is set to YES, the start time should be set.
1.When the value of [PARA]ST[/PARA] in [MML]ADD
ATMTRF[/MML] is set to CBR, the rate unit should be
set; when the value of [PARA]UT[/PARA] is selected, the
peak rate should be set.
2.When the value of [PARA]ST[/PARA] in [MML]ADD
ATMTRF[/MML] is set to UBR_PLUS, the rate unit
should be set; when the value of [PARA]UT[/PARA] is
selected, the minimum rate should be set.
3.When the value of [PARA]ST[/PARA] in [MML]ADD
ATMTRF[/MML] is set to RTVBR or NRTVBR, the rate
unit should be set; when the value of [PARA]UT[/PARA]
is selected, the peak rate and the average rate should be
set.
It is recommended that the SAALLNK/AAL2PATH
None
Cell(ADD This paramter is valid only when
CELLSETUP) [PARA]TxDiversityInd[/PARA] is set to TRUE.
STTD_not_Supported
RNC(ADD This parameter is valid only when
NRNCCELL) [PARA]TxDiversityInd[/PARA] is set to TRUE.
RAB(ADD
TYPRABOLPC)
None
(ADD
TYPRABRLC)
None
When the value of [PARA]FPMUXSWITCH[/PARA] in
[MML]ADD IPPATH[/MML] is set to YES,this parameter
127 IP Path is valid.
NO RNC None
10 SCTP None
OFF RNC None
0 RNC None
OFF RNC None
OFF RNC None
OFF RNC None
OFF RNC None
OFF RNC None
0 RNC None
0 RNC None
0 RNC None
When the value of [PARA]DST[/PARA] in [MML]SET
TZ[/MML] is set to YES and the value of
[PARA]SM[/PARA] in [MML]SET TZ[/MML] is set to
FIRST RNC WEEK, the start week sequence should be set.
60 RNC None
None RNC None
None RNC None
60 RNC None
10 RNC None
None RNC None
None RNC None
5 RNC None
6 RNC
None
3 RNC None
10 RNC None
Cell(ADD
CELLINTERFRE
QHOCOV)
-12
RNC(SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERFRE
QHOCOV)
-92
RNC(SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERFRE
QHOCOV)
-12
RNC(SET
INTERFREQHO
COV)
Cell(ADD
CELLINTERFRE
QHOCOV)
-12
RNC(SET
INTERFREQHO
COV)
Cell(ADD
CELLINTERFRE
QHOCOV)
-92
RNC(SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
16
RNC(SET
INTERRATHOC
OV)
None
1.[PARA]TbSizeIndex1[/PARA] <
[PARA]TbSizeIndex2[/PARA] <
[PARA]TbSizeIndex3[/PARA] <
None RNC [PARA]TbSizeIndex4[/PARA]
1.[PARA]TbSizeIndex1[/PARA] <
[PARA]TbSizeIndex2[/PARA] <
[PARA]TbSizeIndex3[/PARA] <
None RNC [PARA]TbSizeIndex4[/PARA]
1.[PARA]TbSizeIndex1[/PARA] <
[PARA]TbSizeIndex2[/PARA] <
[PARA]TbSizeIndex3[/PARA] <
None RNC [PARA]TbSizeIndex4[/PARA]
1.[PARA]TbSizeIndex1[/PARA] <
[PARA]TbSizeIndex2[/PARA] <
[PARA]TbSizeIndex3[/PARA] <
None RNC [PARA]TbSizeIndex4[/PARA]
None Cell
None
This paramter is valid only when
None Cell [PARA]CellChoice[/PARA] is set to 3GCELL.
10 MTP3 None
This parameter is required when the
[PARA]UseOfHcs[/PARA] parameter is set to USED but
not required when the [PARA]UseOfHcs[/PARA]
D60 Cell parameter is set to NOT_USED.
This parameter is required when the
[PARA]UseOfHcs[/PARA] parameter is set to USED but
not required when the [PARA]UseOfHcs[/PARA]
D20 Cell parameter is set to NOT_USED.
Cell(ADD
CELLHCSHO)
60
RNC(SET
HCSHO)
None
D2 Cell
This parameter is valid when
[PARA]TpenaltyHcsReselect[/PARA] is not set to D0.
Cell(ADD
CELLQUALITY
MEAS)
480
RNC(SET
QUALITYMEAS Valid when [PARA]ChoiceRptUnitForAmrE[/PARA] is
) set to TEN_MSEC
Cell(ADD
CELLQUALITY
MEAS)
480
RNC(SET
QUALITYMEAS Valid when [PARA]ChoiceRptUnitForBeE[/PARA] is set
) to TEN_MSEC
Cell(ADD
CELLQUALITY
MEAS)
480
RNC(SET
QUALITYMEAS Valid when [PARA]ChoiceRptUnitForBeF[/PARA] is set
) to TEN_MSEC
This parameter is valid only when
[PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] is set to
TEN_MSEC,and it must satisfy the following relationship:
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]IntraFreqLdbPeriodTimerLen[/PARA] x 1000/2
(See [MML]SET LDCPERIOD[/MML] and [MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]PucPeriodTimerLen[/PARA] x 1000/2 (See
[MML]SET LDCPERIOD[/MML] and [MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]LdrPeriodTimerLen[/PARA] x 1000/2 (See
[MML]SET LDCPERIOD[/MML] and [MML]SET
20(SET LDM) SATLDCPERIOD[/MML]);
RNC
100(SET SATLDM) [PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]OlcPeriodTimerLen[/PARA]/2 (See [MML]SET
LDCPERIOD[/MML] and [MML]SET
SATLDCPERIOD[/MML]).
This parameter is valid only when
[PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] is set to
TEN_MSEC,and it must satisfy the following relationship:
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]IntraFreqLdbPeriodTimerLen[/PARA] x 1000/2;
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]PucPeriodTimerLen[/PARA] x 1000/2;
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]LdrPeriodTimerLen[/PARA] x 1000/2;
[PARA]TenMsecForDlBasicMeas[/PARA] <
[PARA]OlcPeriodTimerLen[/PARA]/2.
None
None RNC None
2 Ethernet port
None
This paramter is valid only when [PARA]Priority(BLK
None Cell CELL)[/PARA] is set to NORMAL.
10 AAL2 Path None
4 Ethernet port None
Cell(ADD
CELLINTERFRE
QHOCOV)
0
RNC(SET
INTERFREQHO
COV)
None
This parameter is required when the
[PARA]RlcMode[/PARA] parameter is set to AM and the
[PARA]AmRlcCfgPara[/PARA] parameter is set to
5000 RAB FLOWCONTROL_PARA.
Cell(ADD
CELLINTERFRE
QHOCOV)
D0
RNC(SET
INTERFREQHO
COV)
Cell(ADD
CELLINTERFRE
QHOCOV)
D320
RNC(SET
INTERFREQHO
COV)
None
Cell(ADD
CELLINTERFRE
QHOCOV)
D1280
RNC(SET
INTERFREQHO
COV)
None
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
0
HOCOV)
RNC(SET
INTERRATHOC This parameter is valid when
OV) [PARA]InterRatReportMode[/PARA] is set to
PERIODICAL_REPORTING.
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
0
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None(ADD FACH)
10(SET
MBMSFACH,ADD Transport channel
CELLMBMSFACH,ADD
PCH)
None
None(ADD FACH)
35(SET
MBMSFACH,ADD Transport channel
CELLMBMSFACH,ADD
PCH)
None
This paramter is valid only when
[PARA]DynShutDownType[/PARA] is set to
1 Cell ConditionalShutDown.
None
RNC(SET
REDIRECTION)
None Cell(ADD
CELLREDIRECT
ION)
None
1 Cell None
10 NodeB None
None(ADD
FACHDYNTFS,ADD
FACHLOCH,ADD FACH)
1(ADD
Transport channel None
RACHDYNTFS,ADD
RACH)
3(ADD PCH,ADD
PCHDYNTFS)
Cell(ADD
CELLHCSHO)
10
RNC(SET
HCSHO)
None
1 Cell None
None
Cell(ADD
D640(SET CELLINTRAFRE
INTRAFREQHO,ADD QHO)
CELLINTRAFREQHO) RNC(SET
D1280(SET SMLC) SMLC,SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D640 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D640 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D640 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLINTRAFRE
D640 QHO)
RNC(SET
INTRAFREQHO)
None
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
D640
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
D320
RNC(SET
INTERRATHOC
OV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
D1280
RNC(SET
INTERRATHOC
OV)
None
Cell(ADD
CELLINTERRAT
HOCOV)
D0
RNC(SET
INTERRATHOC
OV)
None
None
50 Cell None
This paramter is valid only when
None RNC [PARA]CellChoice[/PARA] is set to 3GCELL.
None RNC None
None RNC None
None RNC None
None LGC port None
When the value of [PARA]BT[/PARA] in [MML]LOP
E1T1[/MML] is set to AEUa or PEUa, the value of
None Cell [PARA]TS[/PARA] should be set.
None Cell
None
500 Ethernet port None
30 Ethernet port None
None
None Cell
None Cell
None
Cell(ADD
CELLQUALITY
MEAS)
D320
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
D320
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
D320
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
D320
RNC(SET
QUALITYMEAS
)
None
Cell(ADD
CELLQUALITY
MEAS)
D240
RNC(SET
QUALITYMEAS
)
None
This parameter is valid only when
[PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or
10 RNC COPPER.
D6(SET LDM)
RNC
D3(SET SATLDM)
None
RNC(SET
FRCCHLTYPEP
D8 ARA) If this parameter is set through both the [MML]SET
Cell(ADD FRCCHLTYPEPARA[/MML] and [MML]ADD
CELLFRC) CELLFRC[/MML] commands, the parameter set through
the [MML]ADD CELLFRC[/MML] command takes
precedence over that set through the [MML]SET
FRCCHLTYPEPARA[/MML] command.
This parameter can be used for selection of the initial rate
for BE services only when the DCCC_SWITCH under the
[PARA]Chswitch[/PARA] parameter is set to on through
the [MML]SET CORRMALGOSWITCH[/MML]
D64 RNC command.
5 RNC
None
0 Cell None
83 Cell
Cell(ADD
CELLLDR)
3
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
3
NodeB(ADD
NODEBLDR)
None
When the value of UlMidRateCalc is
HAND_APPOINT,the following relationship must be
satisfied:
[PARA]UlDcccRateThd[/PARA] <=
D64 RNC [PARA]UlMidRateThd[/PARA].
Cell(ADD
CELLDCCC)
D64 This parameter is available if the value of
RNC(SET
DCCC) [PARA]BEQosPerform[/PARA] in [MML]SET
QOSACT[/MML] is YES.
For the BE users with the same
[PARA]TrafficClass[/PARA], [PARA]THPClass[/PARA]
and [PARA]BearType[/PARA] values, make sure:
[PARA]UlGBR[/PARA] of GOLD users
([PARA]UserPriority[/PARA] is set to GOLD) >=
[PARA]UlGBR[/PARA] of SILVER users
([PARA]UserPriority[/PARA] is set to SILVER) >=
[PARA]UlGBR[/PARA] of COPPER users
([PARA]UserPriority[/PARA] is set to COPPER).
D64 RNC
SF16 Cell
0 Cell None
20 Cell None
1 Cell None
5 RNC
None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
SF8
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
no action
NodeB(ADD
NODEBLDR) None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
The value of this parameter must satisfy the following
relationship:
[PARA]UlLdrTrigThd[/PARA] >=
[PARA]UlLdrRelThd[/PARA];
[PARA]UlOlcRelThd[/PARA] >=
[PARA]UlLdrRelThd[/PARA].
45 Cell
BE traff rate
Cell(ADD
reduction(ADD
CELLLDR)
CELLLDR)
NodeB(ADD
no action(ADD
NODEBLDR)
NODEBLDR) None
55 Cell
75 Cell
80 Cell
The value of this parameter must satisfy the following
relationship:
[PARA]UlNonCtrlThdForHo[/PARA] >
[PARA]UlNonCtrlThdForNonAMR[/PARA];
[PARA]UlNonCtrlThdForNonAMR[/PARA] >
[PARA]UlNonCtrlThdForOther[/PARA].
75 Cell
60 Cell
5 RNC
None
3 Cell None
3 Cell None
D1 RNC
None
The value of this parameter must satisfy the following
relationship:
[PARA]UlOlcTrigThd[/PARA] >=
[PARA]UlOlcRelThd[/PARA];
[PARA]UlOlcRelThd[/PARA] >=
[PARA]UlLdrRelThd[/PARA].
85 Cell
0 Cell None
100 RNC
None
95 Cell
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLLDR)
1
NodeB(ADD
NODEBLDR)
None
Cell(ADD
CELLQOSHO)
20
RNC(SET
QOSHO)
None
None
This parameter is valid only when
10 RNC [PARA]AFSetObj[/PARA] is set to NOPRIORITY.
Restrictions:
1) [PARA]UlThd6A2[/PARA] <=
[PARA]UlThd6B2[/PARA];
2) [PARA]UlThd6A2[/PARA] >
[PARA]UlThd6B1[/PARA]
None RNC
Restrictions:
1) [PARA]UlThd6A1[/PARA] <=
[PARA]UlThd6B1[/PARA];
2) [PARA]UlThd6A2[/PARA] >
[PARA]UlThd6B1[/PARA]
None RNC
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-12
RNC(SET
INTERRATHOC
OV,SET This parameter is valid when the OVERLAY_SWITCH is
INTERFREQHO ON The OVERLAY_SWITCH is in
COV) [PARA]HoSwitch[/PARA] in [MML]SET
CORRMALGOSWITCH[/MML] and
[PARA]MeasQuantityOf3A[/PARA] is CPICH_EC/NO or
AUTO.
Cell(ADD
-92(SET CELLINTERRAT
INTERFREQHOCOV,AD HOCOV,ADD
D CELLINTERFRE
CELLINTERFREQHOCO QHOCOV)
V) RNC(SET
-97(SET INTERRATHOC
INTERRATHOCOV,ADD OV,SET This parameter is valid when the OVERLAY_SWITCH is
CELLINTERRATHOCOV) INTERFREQHO ON The OVERLAY_SWITCH is in
COV) [PARA]HoSwitch[/PARA] in [MML]SET
CORRMALGOSWITCH[/MML] and
[PARA]MeasQuantityOf3A[/PARA] is CPICH_RSCP or
AUTO.
Cell(ADD
CELLQOSHO)
CPICH_RSCP
RNC(SET
QOSHO)
Cell(ADD
-92(SET CELLINTERRAT
INTERFREQHOCOV,AD HOCOV,ADD
D CELLINTERFRE
CELLINTERFREQHOCO QHOCOV)
V) RNC(SET
-107(SET INTERRATHOC
INTERRATHOCOV,ADD OV,SET
CELLINTERRATHOCOV) INTERFREQHO This parameter is valid when the OVERLAY_SWITCH is
COV) ON The OVERLAY_SWITCH is in
[PARA]HoSwitch[/PARA] in [MML]SET
CORRMALGOSWITCH[/MML] and
[PARA]MeasQuantityOf3A[/PARA] is CPICH_RSCP or
AUTO.
None RNC None
None RNC None
None RNC None
Disable RNC None
Cell(ADD
GSMCELL,ADD
NOT_USED CELLHCS)
RNC(ADD
NRNCCELL) None
None RNC None
None SAALLNK/AAL2PATH
None
When the value of [PARA]CARRYT[/PARA] in
[MML]ADD AAL2PATH[/MML] is set to UNI, IMA,
FRAATM, NCOPT, or ATM logic port, this parameter is
None AAL2 Path valid.
RNC(ADD
VLANID)
When the value of [PARA]VLANFlAG[/PARA] in
IP Path(ADD
[MML]ADD IPPATH[/MML] is set to ENABLE, this
IPPATH)
parameter is valid.
None SCTP(ADD
When the value of [PARA]VLANFlAG[/PARA] in
SCTPLNK)
[MML]ADD SCTPLNK[/MML] is set to ENABLE, this
Ethernet
parameter is valid.
port(ADD
ETHMA)
None RNC None
70 RNC None
When the interface type is Iub, transmission type When
is ATMtheorvalue
dual stack,
of [PARA]ITFT[/PARA]
the parameter is RT_VBR;
in [MML]ADD
transimssion type is IP or Hybird IP,
When the interface type is Iur, transmission type TRMMAP[/MML]
is ATM, the parameteris set
is to
RT_VBR;
IUB or IUR
transimssion
or IUCS,type
this is IP, the parameter is EF.
When the interface type is Iu-CS,
RNCtransmission type parameter
is ATM,isthe
valid.
parameter is RT_VBR; transimssion type is IP, the parameter is EF.
100 RNC None
When the interface type is Iub, transmission type When
is ATMtheorvalue
IP, theofparameter
[PARA]ITFT[/PARA]
is NULL; transimssion
in [MML]ADD
type is dual stack, the parameter is
When the interface type is Iur, transmission type TRMMAP[/MML]
is ATM or IP, the parameter
is set to IUB
is NULL.
or IUR, this parameter is
When the interface type is Iu-CS,
RNCtransmission type valid.
is ATM or IP, the parameter is NULL.
0 RNC None
70 RNC None
NO RNC None
5 RNC None
90 RNC None
None
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
0
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None
UNI: 100
NNI: 256 SAAL None
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
Not involved Not involved Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (For the UE in idle mode, indicating whether t Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
Not involved Not involved Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
Y RNC Less than 5 minutes
Not involved Not involved Not involved
Not involved Not involved Not involved
N (no impact on services when the Ping detection Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (For the UE in idle mode, affecting its period o Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (no impact on services when the Ping detection Not involved Not involved
N (no impact on the UE in connected mode and th Not involved Not involved
N (no impact on the UE in connected mode and th Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
Not involved Not involved Not involved
N (no impact on services when the Ping detection Not involved Not involved
Not involved Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N(For the UE in idle mode, the larger the value of Not involved Not involved
N(For the UE in idle mode, the larger the value of Not involved Not involved
N (No impact on the UE in idle mode) Services carried on PVC Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
N (no impact on the UE in connected mode and th Not involved Not involved
N (The UE in idle mode may receive the RNC builtNot involved Not involved
N (The UE in idle mode may receive the RNC builtNot involved Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
N (no impact on the UE in connected mode and th Not involved Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
N (no impact on services when the Ping detection Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (For the UE in idle mode, the parameter will im Not involved Not involved
N(For the UE in idle mode, the larger the value of Not involved Not involved
N (For the UE in idle mode, the parameter will im Not involved Not involved
N (Impact on random access for UEs in idle mode Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
N(For the UE in idle mode, the value of this para Not involved Not involved
N(For the UE in idle mode, the value of this para Not involved Not involved
N (No impact on the UE in idle mode) Services carried on PVC Not involved
N (No impact on the UE in idle mode) Not involved Service not interrupted, but
N (No impact on the UE in idle mode) Not involved Not involved
Not involved Not involved Not involved
Not involved Not involved Not involved
N (No impact on the UE in idle mode) Not involved Not involved
Not involved Not involved Not involved
N (no impact on the UE in connected mode and th Not involved Not involved
N (Changing the time for the UE in idle mode to inNot involved Not involved
N(For the UE in idle mode, the larger the value of Not involved Not involved
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The deleting operation can Read & Write Equipment Versions earlier than RAN11.0
CPU usage to be increased. Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The deleting operation can Read & Write Equipment Versions earlier than RAN11.0
AGPS type is NodeB, the
AGPS reference receiver is
added to the NodeB.
2. One RNC can be
configured with one AGPS
reference receiver at most
while one NodeB can be
configured with five AGPS
reference receivers at most.
3.If the AGPS reference
receiver is configured in the
RNC, the AGPS reference
receiver must be integrated
on the clock card.
4. If the AGPS reference
receiver is added to a
NodeB, the ID of the home
cell of the AGPS reference
receiver must be specified,
and this cell must have been
configured.
5. If the AGPS reference
recevier is added to an
NRNC, the ID of the home
RNC of the AGPS
reference receiver must be
specified and this NRNC
must have been configured.
6. If the AGPS reference
recevier is added to a
NodeB of an NRNC, the
IDs of the home RNC and
the home cell of the AGPS
reference receiver must be
specified, and the NRNC
and the cell must have been
configured. Read & Write Equipment Versions earlier than RAN11.0
7. If the AGPS reference
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
If the transport type of th Read & Write Equipment Versions earlier than RAN11.0
If the transport type of th Read & Write Equipment Versions earlier than RAN11.0
The modification of ATT Read & Write Radio Versions earlier than RAN11.0
The negotiation will be succ Read & Write Transport Versions earlier than RAN11.0
The negotiation will be succ Read & Write Transport Versions earlier than RAN11.0
The negotiation will be succ Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
Each 8 kHz clock of the bac Read & Write Equipment Versions earlier than RAN11.0
Each 8 kHz clock of the bac Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
None Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
If a link is used, you canno Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter is the beari Read & Write Equipment Versions earlier than RAN11.0
This parameter is the beari Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The configuration data must Read & Write Transport Versions earlier than RAN11.0
The configuration data must Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
1. Cell ID is in one-to-o Read & Write Equipment Versions earlier than RAN11.0
After running the [MML]ADRead & Write Radio Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
Modifying this parameter doRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When the network is in poor Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The CN indexes of the same Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The settings of CsInfoUp Read & Write Equipment Versions earlier than RAN11.0
The settings of CsInfoUpd Read & Write Equipment Versions earlier than RAN11.0
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R5 or any later version,
CsNriCfgMode may be set
to SUPP_IUFLEX.The
parameter modification has
no impact on the
equipment.
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R6 or any later version,
CsNriCfgMode may be set
to SUPP_MOCN or
SUPP_IUFLEX_MOCN.T
he parameter modification
has no impact on the
equipment.
Read & Write Equipment Versions earlier than RAN11.0
The settings of CSNRILe Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
If the time delay is very lar Read & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
When running this command,Read
e & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
After this parameter is modi Read & Write Transport Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This address must be a peer Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The IP address of the DHCP Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
In [MML]EXP ELABEL[/MML], Read &
theWrite Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
When this parameter is set Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
For details of the timer, r Read & Write Transport Versions earlier than RAN11.0
For details of the timer, r Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifying this parameter doRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter value of Ig Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
[IMA ID] is used to identif Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The protocol version of IMARead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
Only the OM channel can beRead & Write Equipment Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
If the Inter RAT Inter Plmn Read & Write Radio Versions earlier than RAN11.0
If the Intra RAT Inter Plmn Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter value of In Read & Write Equipment Versions earlier than RAN11.0
This parameter must be the Read & Write Transport Versions earlier than RAN11.0
When this parameter is set Read & Write Transport Versions earlier than RAN11.0
If the transport type of th Read & Write Transport Versions earlier than RAN11.0
If the transport type of th Read & Write Transport Versions earlier than RAN11.0
The IP address of the NodeBRead & Write Equipment Versions earlier than RAN11.0
The IP address of the NodeBRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The value of this parameter Read & Write Transport Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This load EQ table must be Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
The line code should be co Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The addresses of both ends oRead & Write Transport RAN11.0
The addresses of both ends oRead & Write Transport RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The logic port must exist. Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
If a link is used, you canno Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
GPS record should be delet Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter is used wi Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The value of this parameter
must fulfill the following
condition:
[PARA]McchAccessPeriod
Coef[/PARA] >
[PARA]McchRepPeriodCo
ef[/PARA]. Read & Write Radio RAN11.0
The value of this parameter
must fulfill the following
condition:
[PARA]McchModPeriodCo
ef[/PARA] >
[PARA]DRXCycleLenCoef
[/PARA] in [MML]ADD
CNDOMAIN[/MML]. Read & Write Radio RAN11.0
The value of this parameter
must fulfill the following
condition:
[PARA]McchAccessPeriod
Coef[/PARA] >
[PARA]McchRepPeriodCo
ef[/PARA]. Read & Write Radio RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
If the RAN Sharing Suppor Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The value of this parameter Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The IP address of the DHCP Read & Write Transport Versions earlier than RAN11.0
Modifying this parameter doRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
The parameter modification Read & Write Radio RAN11.0
1. When the parameter is
set to OFF, the MR function
is disabled.
2. The modification of this
parameter has no impact on
the equipment. Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter supports onl Read & Write Equipment Versions earlier than RAN11.0
1. Set this parameter to ON Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
The modification may affect Read & Write Transport Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
If the transport type of th Read & Write Transport Versions earlier than RAN11.0
If the transport type of th Read & Write Transport Versions earlier than RAN11.0
The IP address of the NodeBRead & Write Transport Versions earlier than RAN11.0
The IP address of the NodeBRead & Write Transport Versions earlier than RAN11.0
When this parameter is mod Read & Write Equipment Versions earlier than RAN11.0
When this parameter is mod Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
After this parameter is modi Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of NMO Read & Write Radio Versions earlier than RAN11.0
When the value of [PARA Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
Before modifying the NodeBRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When the value of [PARA Read & Write Equipment Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The settings of the local en Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter is modified Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The local IP address and the Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The addresses of both ends oRead & Write Transport RAN11.0
The addresses of both ends oRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modify this parameter will cRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport RAN11.0
This IP path must be alread Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
Modifying this parameter doRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The IP address of the DHCP Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter can be addedRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The settings of PsInfoUp Read & Write Equipment Versions earlier than RAN11.0
The settings of PsInfoUpd Read & Write Equipment Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R5 or any later version,
PsNriCfgMode may be set
to SUPP_IUFLEX.The
parameter modification has
no impact on the
equipment.
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R6 or any later version,
PsNriCfgMode may be set
to SUPP_MOCN or
SUPP_IUFLEX_MOCN.T
he parameter modification
has no impact on the
equipment.
Read & Write Equipment Versions earlier than RAN11.0
The settings of PSNRILe Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
The first byte in the IP ad Read & Write Transport Versions earlier than RAN11.0
The first byte in the IP ad Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
The priority of the correspo Read & Write Transport Versions earlier than RAN11.0
When this parameter is set t Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The value of RafcTmr can b Read & Write Equipment Versions earlier than RAN11.0
If the RAN Sharing Suppor Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The value of RatcTmr can b Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The retransmit mechanism isRead & Write Radio Versions earlier than RAN11.0
The retransmit mechanism isRead & Write Radio Versions earlier than RAN11.0
The retransmit mechanism isRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When you set the clock sour Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The resource group must exiRead & Write Transport Versions earlier than RAN11.0
The resource group must exiRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
After modification, the RNC Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio RAN11.0
Change this parameter will i Read & Write Equipment RAN11.0
The negotiation with the peeRead & Write Transport Versions earlier than RAN11.0
The modification of RTCP Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of RTCP Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
Related traffic record index Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
[MML]SET MRSCOPECTRL[/MML] Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The scramble switch should Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
date or end date by setting
the StartType or EndType
parameter to
"DATEWEEK" type. In this
case, you must set the
benchmark day to (n - 6) or
earlier, where n represents
the last day of the month.
For example, in October,
you must set the benchmark
day to 25 (= 31 - 6) or
earlier. If you set the date to
"Tuesday in or after
Oct.26", it is invalid in year
2005 for the date exceeds
the month scope while in
year 2006 it is October 31,
a valid day. Therefore, you
must abide this
specification to ensure the
setting is valid in each year.
2. When you set a
customized daylight saving
time, you cannot set the
start date or end date of the
daylight saving time to
February 29 by setting the
StartType or EndType
parameter to the DATE
type. The reason is that the
local time cannot be
translated to the daylight
saving time in a leap year
for February 29 does not
exist.
3.The start month and the
end month of daylight Read & Write Equipment Versions earlier than RAN11.0
saving time mustcannot
This parameter be be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The negotiation will be succ Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The source IP address must Read & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
After this parameter is modi Read & Write Transport Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
When the loopback type is Read & Write Equipment Versions earlier than RAN11.0
The standby port does not s Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The priority of the correspo Read & Write Equipment Versions earlier than RAN11.0
If a link is used, you canno Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
Only the active board can beRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
After modification, the RNCRead & Write Transport Versions earlier than RAN11.0
After modification, the RNCRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Before enabling load sha Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
One clock source can only wiRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
One clock source can only wRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
If the interface board clock Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
After this parameter is modi Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
Change this parameter will i Read & Write Transport RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
None Read & Write Equipment Versions earlier than RAN11.0
None Read & Write Equipment Versions earlier than RAN11.0
T302 broadcast in the SIB1 Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The time value of T314 and Read & Write Radio Versions earlier than RAN11.0
The time value of T314 and Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The modification of T321 Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This TRMMAP must be alreaRead & Write Transport Versions earlier than RAN11.0
This TRMMAP must be alreaRead & Write Transport Versions earlier than RAN11.0
This TRMMAP must be alreaRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport RAN11.0
The parameter cannot be modRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When this parameter is mod Read & Write Transport RAN11.0
When this parameter is mod Read & Write Transport RAN11.0
When this parameter is mod Read & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
When the BT is AEUa and Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The cell should be deactivat Read & Write Radio Versions earlier than RAN11.0
The modification of the tim Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Equipment RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
This parameter cannot be moRead & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When this parameter is mod Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
When this parameter is mod Read & Write Transport Versions earlier than RAN11.0
When this parameter is mod Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
When this parameter is mod Read & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
The parameter modification Read & Write Radio RAN11.0
When this parameter is mod Read & Write Transport RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
This parameter is based on Read & Write Transport Versions earlier than RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifying this parameter maRead & Write Transport Versions earlier than RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
Modifiying this parameter wiRead & Write Transport RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
None Read & Write Equipment RAN11.0
None Read & Write Equipment RAN11.0
None Read & Write Equipment RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
None Read & Write Equipment RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
For parameter modification, Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Equipment Versions earlier than RAN11.0
To convert a link from E1 t Read & Write Transport Versions earlier than RAN11.0
This parameter cannot be moRead & Write Transport Versions earlier than RAN11.0
The parameter modification Read & Write Radio Versions earlier than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
r than RAN11.0
CN Parameter ID NE
1 DlCCHLoadRsrvCoeff BSC6900
2 HsdpaMaxGBPThd BSC6900
3 HsupaMaxGBPThd BSC6900
4 DlCellTotalThd BSC6900
5 DlConvAMRThd BSC6900
6 DlConvNonAMRThd BSC6900
7 DlHoCeCodeResvSf BSC6900
8 DlHOThd BSC6900
9 DlHSUPARsvdFactor BSC6900
10 DlOlcTrigThd BSC6900
11 DlOtherThd BSC6900
12 DlTotalEqUserNum BSC6900
13 HsdpaBePBRThd BSC6900
14 HsdpaStrmPBRThd BSC6900
15 HsupaCeConsumeSelection BSC6900
16 MaxHsdpaUserNum BSC6900
17 MaxHsupaUserNum BSC6900
18 NBMDlCacAlgoSelSwitch BSC6900
19 NBMCacAlgoSwitch BSC6900
20 NBMUlCacAlgoSelSwitch BSC6900
21 NodeBHsdpaMaxUserNum BSC6900
22 NodeBHsupaMaxUserNum BSC6900
23 UlCCHLoadFactor BSC6900
24 UlCellTotalThd BSC6900
25 UlHoCeResvSf BSC6900
26 UlNonCtrlThdForAMR BSC6900
27 UlNonCtrlThdForHo BSC6900
28 UlNonCtrlThdForNonAMR BSC6900
29 UlNonCtrlThdForOther BSC6900
30 UlOlcTrigThd BSC6900
30 UlTotalEqUserNum BSC6900
MML Command Meaning
ADD UCELLCAC(Optional) Meaning: Different admission policies are used f
ADD UCELLCAC(Optional)MOD UCELLCAC(Optional) Meaning: Threshold of the maximum gua
ADD UCELLCAC(Optional)MOD UCELLCAC(Optional) Meaning: Threshold of the maximum gua
ADD UCELLCAC(Optional) Meaning: Admission threshold of the t
ADD UCELLCAC(Optional) Meaning: The percentage of the conversational AM
ADD UCELLCAC(Optional) Meaning: The percentage of the conversational no
ADD UCELLCAC(Optional) Meaning: Some cell resources can be reserved for
ADD UCELLCAC(Optional) Meaning: The percentage of the handover service
ADD UCELLCAC(Optional) Meaning: Reserved DL power factor for HSUPA user
ADD UCELLLDM(Optional) Meaning: If the ratio of DL load of the cell to
ADD UCELLCAC(Optional) Meaning: The percentage of other service thresho
ADD UCELLCAC(Optional) Meaning: When the algorithm 2 is used, this para
ADD UCELLCAC(Optional) Meaning: Average throughput admission threshold
ADD UCELLCAC(Optional) Meaning: Average throughput admission threshold
ADD UNODEBALGOPARA(Optional) Meaning: When the dynamic CE algorithm on NodeB
ADD UCELLCAC(Optional) Meaning: Maximum number of users supported by th
ADD UCELLCAC(Optional) Meaning: Maximum number of users supported by th
ADD UCELLALGOSWITCH(Mandatory) Meaning: The algorithms with the above values re
ADD UCELLALGOSWITCH(Optional) MOD UCELLALGOSWIMeaning: "The above values of the algorithms rep
ADD UCELLALGOSWITCH(Mandatory) Meaning: The algorithms with the above values re
ADD UNODEBALGOPARA(Optional) Meaning: Maximum number of HSDPA users of the No
ADD UNODEBALGOPARA(Optional) Meaning: Maximum number of HSUPA users of the No
ADD UCELLCAC(Optional) Meaning: The admission control decision is only
ADD UCELLCAC(Optional) Meaning: Admission threshold of total cell uplin
ADD UCELLCAC(Optional) Meaning: Uplink Credit Reserved by Spread Factor
ADD UCELLCAC(Optional) Meaning: The percentage of the conversational no
ADD UCELLCAC(Optional) Meaning: The percentage of the handover service
ADD UCELLCAC(Optional) Meaning: The percentage of the conversational no
ADD UCELLCAC(Optional) Meaning: The percentage of other service thresho
ADD UCELLLDM(Optional) Meaning: If the ratio of UL load of the cell to
ADD UCELLCAC(Optional) Meaning: When the algorithm 2 is used, this para
policies are used for dedicated channel and common channel users. For common channel users, resources
GUI ValueActual VaUnit: % Default Value: 100
GUI ValueActual VaUnit: % Default Value: 100
GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % Default Value: 90
he conversational AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and
he conversational non-AMR service threshold to the 100% downlink load. It is applicable to algorithm 1
can be reserved for handover UEs to guarantee handover success rate and improve access priority of han
he handover service admission threshold to the 100% downlink load. It is applicable to algorithm 1 and
actor for HSUPA user. The higher the value is, the more resources reserved for the HSUPA control channe
load of the cell to the downlink capacity is not lower than this threshold, the DL overload and congest
ther service thresholds to the 100% downlink load. The services refer to other admissions except the co
2 is used, this parameter defines the total equivalent user number corresponding to the 100% downlink l
admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSDPA BE us
admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed streaming use
algorithm on NodeB is applied, the CE consumption of HSUPA UE is based on the GBR. When the dynamic CE
sers supported by the HSDPA channel. The user in this parameter refers to the user with services on the
sers supported by the HSUPA channel. The user in this parameter refers to the user with services on the
the above values represent are as follow: ALGORITHM_OFF: Disable downlink call admission control algor
f the algorithms represent the following information: CRD_ADCTRL: Control Cell Credit admission control
the above values represent are as follow: ALGORITHM_OFF: Disable uplink call admission control algorit
SDPA users of the NodeB. If the HSDPA user access is rejected by the NodeB, you can infer that the HSDP
SUPA users of the NodeB. If the HSUPA user access is rejected by the NodeB, you can infer that the HSUP
ol decision is only for dedicated channels. For common channels, some resources instead of a special ad
of total cell uplink power. This parameter is related to the target load of the uplink schedule. GUI V
ved by Spread Factor for HandOver. SFOFF means that none of them are reserved for handover. GUI Value R
he conversational non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 an
he handover service admission threshold to the 100% uplink load. It is applicable to algorithm 1 and al
he conversational non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 an
ther service thresholds to the 100% uplink load. The services refer to other admissions except the conv
load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestio
2 is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink lo
annel users, resources instead of separate power admission decision are reserved. For dedicated channel
lt Value: 90
ble to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. Th
licable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admis
access priority of handover services. This parameter defines the quantity of downlink code and CE reso
ble to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That
he HSUPA control channel, which leads to resource waste. If the value is too low, HSUPA user quality ma
DL overload and congestion control function of the cell is triggered. The value of the OLC release thre
dmissions except the conversational AMR service, conversational non-AMR service, and handover scenarios
to the 100% downlink load. The parameter should be related to the admission threshold and actual condi
he accessed HSDPA BE users is lower than the average throughput admission threshold of the HSDPA BE ser
accessed streaming users is lower than the average throughput admission threshold of the HSDPA streami
BR. When the dynamic CE algorithm on NodeB is not applied, the CE consumption of HSUPA UE is based on t
er with services on the HSDPA channel, regardless of the number of RABs carried on the HSDPA channel. M
er with services on the HSUPA channel, regardless of the number of RABs carried on the HSUPA channel. M
admission control algorithm. ALGORITHM_FIRST: The load factor prediction algorithm will be used in down
redit admission control algorithm Only when NODEB_CREDIT_CAC_SWITCH which is set by the SET UCACALGOSWI
mission control algorithm. ALGORITHM_FIRST: The load factor prediction algorithm will be used in uplink
can infer that the HSDPA licenses are insufficient. New HSDPA licenses are required. GUI Value Range: 0
can infer that the HSUPA licenses are insufficient. New HSUPA licenses are required. GUI Value Range: 0
instead of a special admission procedure are reserved. In the UL, according to the current load factor
uplink schedule. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % Default Value: 83
r handover. GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF25
cable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admissi
e to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is
cable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admissi
issions except the conversational AMR service, conversational non-AMR service, and handover scenarios.
overload and congestion control function of the cell is triggered. The value of the OLC release thresh
g to the 100% uplink load. The parameter should be related to the admission threshold and actual condit
. For dedicated channel users, according to the current load factor and the characteristics of the new
R service admission. That is, when an AMR service is accessing, the RNC evaluates the measurement value
e non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measur
wnlink code and CE resources reserved for handover. SFOFF refers to that no resources are reserved. SF3
ndover admission. That is, when a service is handing over to a cell, the RNC evaluates the measurement
, HSUPA user quality may be impacted. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: %
of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or th
and handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for con
eshold and actual condition of the network. GUI Value Range: 1~200 Actual Value Range: 1~200 Unit: None
old of the HSDPA BE service multiplied by the sum of GBR of all the accessed HSDPA BE users, it indicat
ld of the HSDPA streaming service multiplied by the sum of GBR of all the accessed streaming users, it
HSUPA UE is based on the MBR. If the CE consumption of HSUPA UE is based on the GBR, the CE LDR will n
on the HSDPA channel. Maximum HSDPA user number cannot exceed the HSDPA capability of the NodeB product
on the HSUPA channel. Maximum HSUPA user number cannot exceed the HSUPA capability of the NodeB product
hm will be used in downlink CAC. ALGORITHM_SECOND: The equivalent user number algorithm will be used in
by the SET UCACALGOSWITCH command and this switch are on,the Cell Credit admission control algorithm i
will be used in uplink CAC. ALGORITHM_SECOND: The equivalent user number algorithm will be used in upl
red. GUI Value Range: 0~3840 Actual Value Range: 0~3840 Unit: None Default Value: 3840
red. GUI Value Range: 0~3840 Actual Value Range: 0~3840 Unit: None Default Value: 3840
he current load factor and the characteristics of the new call, the UL CAC algorithm predicts the new t
: % Default Value: 83
64), SF128(SF128), SF256(SF256), SFOFF(SFOFF) Actual Value Range: SF4, SF8, SF16, SF32, SF64, SF128, SF
non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measurem
over admission. That is, when a service is handing over to a cell, the RNC evaluates the measurement va
non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measurem
nd handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for contr
the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the
shold and actual condition of the network. GUI Value Range: 1~200 Actual Value Range: 1~200 Unit: None
acteristics of the new call, the CAC algorithm predicts the new TX power with the assumption of admitti
s the measurement value of the downlink load after the service is accessed. If the DL load of a cell is
NC evaluates the measurement value of the downlink load after the service is accessed. If the DL load o
urces are reserved. SF32 refers to that a code resource with SF = 32 and its corresponding credit resou
luates the measurement value of the downlink load after the service is accessed. If the DL load of a ce
0~1, step:0.01 Unit: % Default Value: 0
rigger threshold, or the system state may have a ping-pong effect. The recommended difference between t
rameter is used for controlling other service admissions. That is, when a service is accessing, the RNC
Range: 1~200 Unit: None Default Value: 80
PA BE users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA BE servi
ed streaming users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA s
GBR, the CE LDR will not select HSUPA users to do data rate reduction. If the CE consumption of HSUPA
ty of the NodeB product, In practice, the value can be set based on the cell type and the richness of t
ty of the NodeB product, In practice, the value can be set based on the cell type and the richness of t
gorithm will be used in downlink CAC. ALGORITHM_THIRD: The loose call admission control algorithm will
ion control algorithm is valid. HSDPA_UU_ADCTRL: Control HSDPA UU Load admission control algorithm HSDP
thm will be used in uplink CAC. ALGORITHM_THIRD: The loose call admission control algorithm will be use
ithm predicts the new traffic channels load factor with the assumption of admitting the new call, then
, SF32, SF64, SF128, SF256, SFOFF Unit: None Default Value: SF16
evaluates the measurement value of the uplink load after the service is accessed. If the UL load of a
ates the measurement value of the uplink load after the service is accessed. If the UL load of a cell i
evaluates the measurement value of the uplink load after the service is accessed. If the UL load of a
meter is used for controlling other service admissions. That is, when a service is accessing, the RNC e
gger threshold, or the system state may have a ping-pong effect. The recommended difference between the
ange: 1~200 Unit: None Default Value: 95
e assumption of admitting the new call, then plus with the premeditated common channel DL load factor to
he DL load of a cell is higher than this threshold after the access of an AMR speech service, this servi
essed. If the DL load of a cell is higher than this threshold after the access of a non-AMR speech servi
responding credit resource are reserved. GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF
If the DL load of a cell is higherthan this threshold after the access, this service will be rejected.
ed difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is
e is accessing, the RNC evaluates the measurement value of the downlink load after the service is access
and new HSDPA BE services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA BE service
tisfied and new HSDPA streaming services are not allowed. Otherwise, the QoS can be satisfied and new HS
E consumption of HSUPA UE is based on the MBR, the CE LDR will select HSUPA users to do data rate reduct
e and the richness of the available HSDPA power and code resources. GUI Value Range: 0~128 Actual Value
e and the richness of the available HSUPA power and code resources. GUI Value Range: 0~128 Actual Value
control algorithm will be used in downlink CAC. GUI Value Range: ALGORITHM_OFF, ALGORITHM_FIRST, ALGORIT
control algorithm HSDPA_GBP_MEAS: Control HSDPA HS-DSCH Required Power measurement HSDPA_PBR_MEAS: Cont
l algorithm will be used in uplink CAC. GUI Value Range: ALGORITHM_OFF, ALGORITHM_FIRST, ALGORITHM_SECON
ing the new call, then plus with the premeditated common channel UL load factor to get the predicted UL
d. If the UL load of a cell is higher than this threshold after the access of a non-AMR speech service,
the UL load of a cell is higher than this threshold after the access, this service will be rejected. If
d. If the UL load of a cell is higher than this threshold after the access of a non-AMR speech service,
is accessing, the RNC evaluates the measurement value of the uplink load after the service is accessed.
difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is de
annel DL load factor to get the predicted DL load factor. Then, compare it with the DL admission thresh
ech service, this service will be rejected. If the DL load of a cell will not be higher than this thres
a non-AMR speech service, this service will be rejected. If the DL load of a cell will not be higher t
6(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF) Actual Value Range: SF4, SF8,
vice will be rejected. If the DL load of a cell will not be higher than this threshold, this service wi
higher than 10%. It is desirable to set the two parameters a bit higher given that the difference betwe
r the service is accessed. If the DL load of a cell is higher than this threshold after the access of a
nd new HSDPA BE services are allowed. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: %
be satisfied and new HSDPA streaming services are allowed. GUI Value Range: 0~100 Actual Value Range: 0
to do data rate reduction on condition that the HSUPA DCCC switch is ON. GUI Value Range: MBR, GBR Act
ge: 0~128 Actual Value Range: 0~128 Unit: None Default Value: 64
ge: 0~128 Actual Value Range: 0~128 Unit: None Default Value: 20
LGORITHM_FIRST, ALGORITHM_SECOND, ALGORITHM_THIRD Actual Value Range: ALGORITHM_OFF, ALGORITHM_FIRST, A
nt HSDPA_PBR_MEAS: Control HSDPA HS-DSCH Provided Bit Rate measurement HSUPA_UU_ADCTRL: Control HSUPA U
_FIRST, ALGORITHM_SECOND, ALGORITHM_THIRD Actual Value Range: ALGORITHM_OFF, ALGORITHM_FIRST, ALGORITHM
o get the predicted UL load factor. Then, compare it with the UL admission threshold. If the value is n
on-AMR speech service, this service will be rejected. If the UL load of a cell will not be higher than
e will be rejected. If the UL load of a cell will not be higher than this threshold, this service will
on-AMR speech service, this service will be rejected. If the UL load of a cell will not be higher than
e service is accessed. If the UL load of a cell is higher than this threshold after the access of a ser
gher than 10%. It is desirable to set the two parameters a bit higher given that the difference between
the DL admission threshold. If the value is not higher than the threshold, the call is admitted; otherw
higher than this threshold, this service will be admitted. The DL load factor thresholds include param
ll will not be higher than this threshold, this service will be admitted. The DL load factor thresholds
Value Range: SF4, SF8, SF16, SF32, SF64, SF128, SF256, SFOFF Unit: None Default Value: SF32
eshold, this service will be admitted. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit:
at the difference between OLC trigger threshold and OLC release threshold is fixed. GUI Value Range: 0~
d after the access of a service, this service will be rejected. If the DL load of a cell will not be hi
hold. If the value is not higher than the threshold, the call is admitted; otherwise, rejected. GUI Val
ill not be higher than this threshold, this service will be admitted. The UL load factor thresholds inc
old, this service will be admitted. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % D
ill not be higher than this threshold, this service will be admitted. The UL load factor thresholds inc
ter the access of a service, this service will be rejected. If the UL load of a cell will not be higher
the difference between OLC trigger threshold and OLC release threshold is fixed. GUI Value Range: 0~10
all is admitted; otherwise, rejected. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: %
hresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold]
load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover acce
Value: SF32
: 0~1, step:0.01 Unit: % Default Value: 85
ed. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % Default Value: 95
f a cell will not be higher than this threshold, this service will be admitted. The DL load factor thre
l MBMS UU Load admission control algorithm HSUPA_PBR_MEAS: Control HSUPA Provided Bit Rate measurement
wise, rejected. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % Default Value: 0
d factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access t
~1, step:0.01 Unit: % Default Value: 80
d factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access t
cell will not be higher than this threshold, this service will be admitted. The UL load factor threshol
. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: % Default Value: 95
0~1, step:0.01 Unit: % Default Value: 0
over access threshold] and [DL threshold of other services]. The four parameters can be used to limit t
ice], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be u
The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handove
d Bit Rate measurement HSUPA_EDCH_RSEPS_MEAS: Control HSUPA Provided Received Scheduled EDCH Power Shar
% Default Value: 0
, [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used
, [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used
UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover ac
can be used to limit the proportion between the conversational service, handover user and other servic
our parameters can be used to limit the proportion between the conversational service, handover user an
R service], [DL handover access threshold] and [DL threshold of other services]. The four parameters ca
heduled EDCH Power Share measurement EMC_UU_ADCTRL: Control power admission for emergency user RTWP_RES
parameters can be used to limit the proportion between the conversational service, handover user and ot
parameters can be used to limit the proportion between the conversational service, handover user and ot
rvice], [UL handover access threshold] and [UL threshold of other services]. The four parameters can be
r user and other services in a specific cell, and to guarantee the access priority of the conversationa
rvice, handover user and other services in a specific cell, and to guarantee the access priority of the
The four parameters can be used to limit the proportion between the conversational service, handover u
emergency user RTWP_RESIST_DISTURB: Control algorithm of resisting disturb when RTWP is abnormal FACH_U
e, handover user and other services in a specific cell, and to guarantee the access priority of the con
e, handover user and other services in a specific cell, and to guarantee the access priority of the con
four parameters can be used to limit the proportion between the conversational service, handover user
y of the conversational AMR service. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit: %
access priority of the conversational non-AMR service. GUI Value Range: 0~100 Actual Value Range: 0~1,
al service, handover user and other services in a specific cell, and to guarantee the access priority o
TWP is abnormal FACH_UU_ADCTRL: The switch for resource admission to the FACH over the Uu interface (FA
ss priority of the conversational non-AMR service. GUI Value Range: 0~100 Actual Value Range: 0~1, step
ss priority of the conversational non-AMR service. GUI Value Range: 0~100 Actual Value Range: 0~1, step
ervice, handover user and other services in a specific cell, and to guarantee the access priority of ot
0~1, step:0.01 Unit: % Default Value: 80
tual Value Range: 0~1, step:0.01Unit: % Default Value: 80
e the access priority of other services. GUI Value Range: 0~100 Actual Value Range: 0~1, step:0.01 Unit
er the Uu interface (FACH_UU_ADCTRL) is used to enable or disable the user admission function to FACH.
sion function to FACH. 1. If this switch is enabled: if the current cell is congested due to overload,
1 DlCCHLoadRsrvCoeff
2 HsdpaMaxGBPThd
3 HsupaMaxGBPThd
4 DlCellTotalThd
5 DlConvAMRThd
6 DlConvNonAMRThd
7 DlHoCeCodeResvSf
8 DlHOThd
9 DlHSUPARsvdFactor
10 DlOlcTrigThd
11 DlOtherThd
12 DlTotalEqUserNum
13 HsdpaBePBRThd
14 HsdpaStrmPBRThd
15 HsupaCeConsumeSelection
16 MaxHsdpaUserNum
17 MaxHsupaUserNum
18 NBMDlCacAlgoSelSwitch
19 NBMCacAlgoSwitch
20 NBMUlCacAlgoSelSwitch
21 NodeBHsdpaMaxUserNum
22 NodeBHsupaMaxUserNum
23 UlCCHLoadFactor
24 UlCellTotalThd
25 UlHoCeResvSf
26 UlNonCtrlThdForAMR
27 UlNonCtrlThdForHo
28 UlNonCtrlThdForNonAMR
29 UlNonCtrlThdForOther
30 UlOlcTrigThd
31 UlTotalEqUserNum
Impact on Radio Network Performance
The larger the value of this parameter, the more the power resources
reserved for common channels and the less the power resources
available for dedicated channels. This decreases the admission
success rate of users and the system resource utilization rate. The
smaller the value of this parameter, the less the power resources
reserved for common channels and the more the power resources
available for dedicated channels. This increases the number of
admitted users but also the probability of congestion, affecting the
service quality of online users and system stability
The larger the value of this parameter, the larger the GBR for HSDPA
users and the less the resources available for DCH users. As a
result, the cell capacity for R99 services decreases. The smaller the
value of this parameter, the smaller the GBR for HSDPA users. As a
result, the admission success rate of HSDPA users and the cell
capacity for HDSPA services decrease.
The larger the value of this parameter, the larger the GBR for HSUPA
users and the less the resources available for DCH users. As a
result, the cell capacity for R99 services decreases. The smaller the
value of this parameter, the smaller the GBR for HSUPA users. As a
result, the admission success rate of HSUPA users and the cell
capacity for HUSPA services decrease.
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization.
The larger the value of this parameter, the more the admitted users.
This decreases the uplink coverage of a cell and increases the
interference to neighboring cells. If the cell coverage shrinks to an
extent, system stability is affected. The smaller the value of this
parameter, the higher the probability that system resources are not
fully utilized. As a result, the target capacity defined in the
network plan cannot be achieved.
The larger the value of this parameter, the more the admitted users.
This decreases the uplink coverage of a cell and increases the
interference to neighboring cells. If the cell coverage shrinks to an
extent, system stability is affected. The smaller the value of this
parameter, the higher the probability that system resources are not
fully utilized. As a result, the target capacity defined in the
network plan cannot be achieved.
The larger the value of this parameter, the less the credit and code
resources reserved for UEs in handovers and the higher the
probability of rejecting access requests of UEs in handovers. As a
result, the performance of UEs in handovers cannot be guaranteed. The
smaller the value of this parameter, the higher the probability of
rejecting new UEs and the less efficiently credit and code resources
are utilized.
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization.
The larger the value of this parameter, the more the power resources
reserved for downlink HSUPA control channels and the less the power
resources available for dedicated channels. This decreases the
admission success rate of users and the system resource utilization
rate. The smaller the value of this parameter, the less the power
resources reserved for downlink HSUPA control channels and the more
the power resources available for dedicated channels. This increases
the number of admitted users but also the probability of congestion,
affecting the service quality of online users and system stability.
The larger the value of this parameter, the more the admitted users.
This decreases the uplink coverage of a cell and increases the
interference to neighboring cells. If the cell coverage shrinks to an
extent, system stability is affected. The smaller the value of this
parameter, the higher the probability that system resources are not
fully utilized. As a result, the target capacity defined in the
network plan cannot be achieved.
The larger the value of this parameter, the larger the cell capacity
for the total number of downlink equivalent users. This increases the
number of admitted users but also the probability of congestion,
affecting the service quality of online users and system stability.
The smaller the value of this parameter, the smaller the cell
capacity for the total number of downlink equivalent users. This
decreases the admission success rate of users and the system resource
utilization rate
If the parameter value is too large, admission of the HSDPA BE
services becomes difficult. In this case, the service quality of the
HSDPA BE services improves but the HSDPA BE service capacity
decreases. If the parameter value is too low, admission of the HSDPA
BE services becomes easy. In this case, the HSDPA BE service capacity
increases but the quality of the active HSDPA BE services cannot be
guaranteed
The larger the value of this parameter, the higher the probability
that the number of admitted HSDPA users is beyond the supported
system capacity. As a result, HSDPA services are congested and the
service quality is unsatisfactory. The smaller the value of this
parameter, the more the HSDPA users that are denied access. As a
result, some resources are idle and wasted, affecting the system
capacity.
The larger the value of this parameter, the higher the probability
that the number of admitted HSUPA users is beyond the supported
system capacity and the service quality is unsatisfactory. The
smaller the value of this parameter, the more the HSUPA users that
are denied access. As a result, some resources are idle and wasted,
affecting the system capacity
The impacts of selecting different downlink admission control
algorithms are as follows: ALGORITHM_OFF: Downlink power admission
control algorithm is disabled and the number of admitted UEs
increases. If a cell admits excess UEs, the cell is congested and
system stability is affected. ALGORITHM_FIRST: With this algorithm,
the network side performs admission control based on the downlink
power load and the predicted power load increment caused by admitting
new UEs in a cell. This algorithm prevents excess user access,
enhancing system stability. ALGORITHM_SECOND: With this algorithm,
the network side performs admission control based on the number of
downlink equivalent UEs and the predicted increment in the number of
downlink equivalent UEs to be admitted. This algorithm prevents
excess user access, enhancing system stability. ALGORITHM_THIRD: With
this algorithm, the network side performs admission control based on
the downlink power load in a cell. This algorithm prevents excess
user access, enhancing system stability. In addition, this algorithm
does not predict the increment in the number of UEs, facilitating
user access.
None
None
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization.
The more the credit resources reserved for common channels, the
higher the service quality of online users. However, the power
resource utilization rate decreases, affecting system capacity. The
less the credit resources reserved for common channels, the more
efficiently power resources are utilized. However, coverage shrinks
when the resources are insufficient
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization
If the parameter value is large, more users are admitted but system
congestion is easy to happen, affecting system stability and the
quality of active services. If the parameter value is small, the user
admission success rate decreases, resulting in low resource
utilization
If the parameter value is large, more users are admitted but the
system load becomes heavy, leading to congestion and affecting system
stability. If the parameter value is small, users are difficult to be
admitted, resulting in low resource utilization
0~100 % 0
0~100 % 100
0~100 % 100
0~100 % 90
0~100 % 80
0~100 % 80
SF4,SF8,SF16,SF32,SF64, SF32(SF32)
SF128,SF256, SFOFF
0~100 % 85
0~100 % 0
0~100 % 95
0~100 % 75
1~200 80
0~100 % 30
0~100 % 70
0~128 None 64
CRD_ADCTRL, HSDPA_UU_ADCTRL,
HSUPA_UU_ADCTRL, MBMS_UU_ADCTRL, CRD_ADCTRL-1&HSDPA_UU_ADCTRL-
HSDPA_GBP_MEAS, HSDPA_PBR_MEAS, 0&HSUPA_UU_ADCTRL-0&MBMS_UU_ADCTRL-
SYS_INFO_UPDATE_FOR_IU_RST, 0&HSDPA_GBP_MEAS-0&HSDPA_PBR_MEAS-
HSUPA_PBR_MEAS, 0&SYS_INFO_UPDATE_FOR_IU_RST-
HSUPA_EDCH_RSEPS_MEAS, 0&HSUPA_PBR_MEAS-
EMC_UU_ADCTRL, 0&HSUPA_EDCH_RSEPS_MEAS-
RTWP_RESIST_DISTURB, 0&EMC_UU_ADCTRL-
SIGNALING_SHO_UL_AC_SWITCH, 1&RTWP_RESIST_DISTURB-
FACH_UU_ADCTRL, 0&SIGNALING_SHO_UL_AC_SWITCH-
MIMOCELL_LEGACYHSDPA_ADCTRL, 0&FACH_UU_ADCTRL-
FAST_DORMANCY_ADCTRL, 0&MIMOCELL_LEGACYHSDPA_ADCTRL-
FACH_USER_NUM_NOT_CTR 0&FAST_DORMANCY_ADCTRL-
1&FACH_USER_NUM_NOT_CTRL-0
ALGORITHM_OFF, ALGORITHM_FIRST,
ALGORITHM_SECOND, None
ALGORITHM_THIRD,
ALGORITHM_FOURTH
0~6144 6144
0~6145 6144
0~100 % 0
0~100 % 83
0~100 80
0~100 % 60
0~100 % 80
0~100 % 95
1~200 120
Recommended Value Mandatory Impact
0 NO
100 NO
100 NO
90 NO
80 NO
80 NO
SF32(SF32) NO Cell
85 NO Cell
0 NO Cell
95 NO Cell
75 NO Cell
80 NO Cell
30 NO Cell
70 NO Cell
MBR NO NodeB
64 NO Cell
None NO Cell
None YES Cell
6144 NO NodeB
6144 NO NodeB
0 NO Cell
83 NO Cell
0 NO Cell
80 NO Cell
60 NO Cell
80 NO Cell
95 NO Cell
120 NO Cell
Object Name FunctionSet Name
58]
= (1-VS.RAC.NewCallAcc/VS.RAC.NewCallReq)*100%.
Counter
Formula Feature ID Feature Name
Unit