Académique Documents
Professionnel Documents
Culture Documents
QUESTION NO: 1
A Windows Server 2008 host is connected to a VNX series array, using dual FC adapters and
running PowerPath 5.5 software. What is the correct ALUA failover mode for this host?
A. Mode 0
B. Mode 1
C. Mode 2
D. Mode 4
Answer: D
Explanation:
QUESTION NO: 2
After presenting a LUN to a Linux host, which utility is used to configure a partition?
A. fdisk
B. Disk Management
C. Unisphere Server Utility
D. Unisphere Service Manager
Answer: A
Explanation:
QUESTION NO: 3
Where is the CHAP iSCSI username and password stored on a RedHat 4 host?
A. /etc/iscsi.conf
B. /etc/iscsi/iscsi.conf
C. /etc/init.d/iscsi.conf
D. /etc/init.d/iscsi/iscsi.conf
Answer: A
Explanation:
2
EMC E20-547 Exam
QUESTION NO: 4
Which failover software is strongly recommended for a host attached to a VNX array?
A. PowerPath
B. MPIO
C. DMP
D. ALUA
Answer: D
Explanation:
QUESTION NO: 5
Which criterion must be met before executing the storagepool destroy command with Navisphere
Secure CLI?
Answer: C
Explanation:
QUESTION NO: 6
What is an advantage of the VAAI feature when provisioning an ESXi host from a VNX array?
A. Some workload can be offloaded from the host to the array freeing up host resources
B. vCenter can directly communicate with the array to discover capabilities and monitor health
C. Hosts automatically register initiators with the array and optimize initiator configuration
D. Array connectivity is automatically load balanced and protected from path failures
Answer: A
Explanation:
QUESTION NO: 7
3
EMC E20-547 Exam
In which order is a File System made available to clients on the network through NFS?
A. Create the FS, Mount the FS on the Data Mover, Export the File System, Create a mountpoint
on client, mount the export on the client
B. Make sure NFS service is running, Create the FS, Mount the FS on the Data Mover, Add a
computer name, mount export on client
C. Make sure NTP service is running, Export the File System, mount the export on the client
D. Make sure NTP service is running, Create the FS, Mount the FS on the Data Mover, Export the
File System, mount the export on the client
Answer: A
Explanation:
QUESTION NO: 8
A storage administrator has provisioned storage to a server, but only some of the LUNs are visible
to the host.
Answer: A
Explanation:
QUESTION NO: 9
Answer: A
Explanation:
4
EMC E20-547 Exam
QUESTION NO: 10
What is the maximum number of characters you can use for a VNX Block Only Storage Processor
Hostname?
A. 15 characters
B. 10 characters
C. 20 characters
D. 25 characters
Answer: A
Explanation:
QUESTION NO: 11
A storage administrator is preparing to provision storage for a data warehouse application. What
can the administrator do to maximize application performance?
A. Use SAS drives to create a RAID 5 RAID Group with High Bandwidth Reads enabled.
B. Use EFD drives to create a RAID 5 RAID Group with High Bandwidth Reads enabled.
C. Choose 1024 block stripe element size when binding LUNs.
D. Choose 128 block stripe element size when binding LUNs.
Answer: A
Explanation:
QUESTION NO: 12
What default option does a newly created file system have when it is NFS exported?
A. R/W
B. R/W/X
C. R/O
D. R/X
Answer: A
Explanation:
5
EMC E20-547 Exam
QUESTION NO: 13
An administrator tries to modify the quota settings on a CIFS share using a Windows 2000 server,
but the Quota tab does not exist in the network drive properties. What could be a possible cause?
A. Exporting is implemented at the file system subdirectory level on VNX OE for File.
B. Windows users cannot modify the quota settings.
C. The user does not have administrator privileges on this share.
D. Quotas can be managed only with Windows 2003 or Windows 2008.
Answer: A
Explanation:
QUESTION NO: 14
Answer: A
Explanation:
QUESTION NO: 15
During the installation process of a VNX for Block and File system, you are prompted to change
passwords for the default accounts.
A. sysadmin
B. storageadmin
C. admin
D. administrator
Answer: A
6
EMC E20-547 Exam
Explanation:
QUESTION NO: 16
Answer: A
Explanation:
QUESTION NO: 17
Which two protocols can be used for DNS communication on a Data Mover?
Answer: A
Explanation:
QUESTION NO: 18
A. A storage pool thick LUN uses slightly more capacity than the amount of user data written
B. A storage pool thick LUN uses less capacity than the amount the server operating system sees
C. Capacity of a storage pool thick LUN uses the same capacity as the server operating system
sees
D. Capacity of a storage pool thick LUN uses less user capacity then a traditional LUN
7
EMC E20-547 Exam
Answer: A
Explanation:
QUESTION NO: 19
Answer: A
Explanation:
QUESTION NO: 20
Answer: A
Explanation:
QUESTION NO: 21
What is a critical capacity consideration when configuring traditional RAID Groups on a VNX
array?
Answer: A
8
EMC E20-547 Exam
Explanation:
QUESTION NO: 22
In a VNX Unified system, how can the lost+found and etc directories be hidden from the client
when exporting a file system?
A. Export the file system at the subdirectory level and not the root file system
B. Use FDISK to mark the partition active prior to exporting
C. Leave the Root Hosts section empty when exporting
D. Select the Host Access Read-only check box prior to exporting.
Answer: A
Explanation:
QUESTION NO: 23
What is a critical performance and availability consideration when configuring traditional RAID
Groups on a VNX array?
A. Larger RAID 5 groups have increased risk to availability and higher IO throughput
B. Larger RAID 5 groups have decreased risk to availability and lower IO throughput
C. Smaller RAID 5 groups have increased risk to availability and lower IO throughput
D. Smaller RAID 5 groups have decreased risk to availability and higher IO throughput
Answer: A
Explanation:
QUESTION NO: 24
Answer: A
9
EMC E20-547 Exam
Explanation:
QUESTION NO: 25
Answer: A
Explanation:
QUESTION NO: 26
A storage administrator wants to enable data compression on inactive backup volumes that are
configured on storage pool LUNs.
Answer: A
Explanation:
QUESTION NO: 27
A Linux host has been set up and successfully connected to the VNX array, but the local
administrator cannot issue CLI commands.
10
EMC E20-547 Exam
A. The local administrator was not added to the host agent configuration file
B. The host is only connected to one SP on the VNX array.
C. The host agent must be stopped for the utility to work.
D. Linux iSCSI CHAP data was entered on the target, but not the initiators.
Answer: A
Explanation:
QUESTION NO: 28
Answer: A
Explanation:
QUESTION NO: 29
A company has many VNX file systems that they currently export using NFS. Their goal is to
simplify the management of these file systems for the Linux clients. How can the storage team
help the company achieve this goal?
A. Use the automounter feature with the autofs service to automatically mount file systems.
B. Create administrative exports to the file system roots and community exports for their
subdirectories.
C. Create AVM file systems and enable auto extend on the file systems.
D. Mount each file system manually to maintain control of individual export permissions.
Answer: A
Explanation:
QUESTION NO: 30
What is the minimum number of administrative accounts for a Unisphere storage domain?
11
EMC E20-547 Exam
A. 1
B. 2
C. 3
D. 4
Answer: A
Explanation:
QUESTION NO: 31
The Unified Storage Management plugin for VMware assists in automating the provisioning of
storage on a VNX Storage System. What types of storage can be provisioned through the
Provision Storage wizard?
Answer: A
Explanation:
QUESTION NO: 32
How does host file system defragmentation of pool LUNs affect VNX performance?
A. Causes heavy loading of cache and back-end ports and may result in a decrease in system
performance.
B. Does not cause additional VNX system load and will not affect system performance.
C. Causes heavy loading of cache and front-end ports and may result in a decrease in system
performance.
D. Reduces loading of cache and back-end ports and may result in an increase in system
performance.
Answer: A
Explanation:
QUESTION NO: 33
12
EMC E20-547 Exam
What is the maximum file system size currently supported on a VNX system?
A. 2 TB
B. 16 TB
C. 32 TB
D. 64 TB
Answer: B
Explanation:
QUESTION NO: 34
The user authentication and system management operations to the VNX with the Unisphere GUI
or CLI are performed over the network using which industry standard protocols?
A. Secure Socket Layer (SSL), Transport Layer Security (TLS) and Secure Shell (SSH).
B. Password Authentication Protocol (PAP), Transport Layer Security (TLS) and Secure Shell
(SSH).
C. Secure Socket Layer (SSL), Transport Layer Security (TLS) and NT LAN Manager (NTLM).
D. Secure Socket Layer (SSL), Generic Security Services (GSS) and Secure Shell (SSH).
Answer: A
Explanation:
QUESTION NO: 35
A Storage Administrator is provisioning storage from a VNX array to a Windows 2003 host.
Answer: A
Explanation:
13
EMC E20-547 Exam
QUESTION NO: 36
A. csv
B. txt
C. pdf
D. doc
Answer: A
Explanation:
QUESTION NO: 37
How does the VNX handle LUN ownership changes so that the access path to the LUN is
available to both SPs simultaneously?
Answer: A
Explanation:
QUESTION NO: 38
You are in the process of provisioning a new NAS volume with Unisphere. Where under the
Unisphere Monitoring and Alerts section can you monitor or cancel the actions?
Answer: A
Explanation:
14
EMC E20-547 Exam
QUESTION NO: 39
A SnapView snapshot can have how many snapshots of the source LUN?
A. 8
B. 24
C. 128
D. 256
Answer: A
Explanation:
QUESTION NO: 40
What describes the process to read a Snapview Snapshot from a secondary host?
Answer: A
Explanation:
QUESTION NO: 41
In addition to EFD 3.5, which drive options are supported in VNX series arrays?
Answer: A
15
EMC E20-547 Exam
Explanation:
QUESTION NO: 42
What is the maximum number of Fibre Channel initiator ports, per Linux host, supported by VNX
for Block?
A. 4
B. 8
C. 16
D. 32
Answer: C
Explanation:
QUESTION NO: 43
Answer: A
Explanation:
QUESTION NO: 44
Answer: A
Explanation:
16
EMC E20-547 Exam
QUESTION NO: 45
What should be done prior to manually stopping a SnapView session that is running?
Answer: A
Explanation:
QUESTION NO: 46
Which Unisphere wizard can automatically allocate all available disk storage and present it as
private LUNs?
Answer: A
Explanation:
QUESTION NO: 47
For what reason would you increase the default Ethernet frame MTU on a VNX Datamover?
Answer: A
17
EMC E20-547 Exam
Explanation:
QUESTION NO: 48
Answer: A
Explanation:
QUESTION NO: 49
Answer: A
Explanation:
QUESTION NO: 50
Which dependency will prevent a Virtual Network device from being deleted?
Answer: A
Explanation:
18
EMC E20-547 Exam
QUESTION NO: 51
You are migrating a LUN within a VNX series array to an equal size LUN but with a different RAID
type.
Answer: A
Explanation:
QUESTION NO: 52
What happens when a reverse synchronization completes without Protected Restore Mode
enabled?
Answer: A
Explanation:
QUESTION NO: 53
A Storage Administrator is configuring a new VNX array. There are 10 MS Exchange Servers to
be connected to this array.
What configuration will maximize performance while isolating the backend IO traffic from each
host?
19
EMC E20-547 Exam
B. Thick Pool based LUNs from one wide pool
C. Thick Pool based LUNs from several isolated pools
D. Thin Pool based LUNs from one wide pool
Answer: A
Explanation:
QUESTION NO: 54
What will be the status of FAST Cache on the LUNs that were created prior to the installation of
Fast Cache Enabler?
Answer: A
Explanation:
QUESTION NO: 55
Striped metaLUNs:
Answer: A
Explanation:
QUESTION NO: 56
20
EMC E20-547 Exam
What is the minimum acceptable number of drives in a RAID 6 pool on a VNX array?
A. 3
B. 4
C. 8
D. 16
Answer: B
Explanation:
QUESTION NO: 57
A customer has an application that uses a small amount of capacity but has very high
performance requirements. Their new VNX is fully virtually provisioned and uses FAST VP storage
pools. The customer wants to configure the LUNs for this application on high performance storage.
Answer: A
Explanation:
QUESTION NO: 58
Which RecoverPoint configuration details can be presented in report format when using Data
Protection Advisor?
A. Replication sets
B. Replication lag
C. Link state change
D. RPA configuration changes
Answer: A
Explanation:
21
EMC E20-547 Exam
QUESTION NO: 59
The file system for an SQL database is running low on available capacity. The database is running
on a Windows Server 2008 host connected to a VNX Block array. The file system LUN is
configured in a FAST VP enabled pool.
How can the storage administrator add capacity without disrupting the users?
A. Expand the LUN online and then extend the file system on the host
B. Create a larger LUN then use VNX LUN migration to migrate the data
C. Expand the LUN into a MetaLUN and extend the file system on the host
D. The LUN cannot be expanded or migrated without disruption to the users
Answer: A
Explanation:
QUESTION NO: 60
A. VNX 5700
B. VNX 5100
C. VNXe 3300
D. VNX 5300
Answer: A
Explanation:
QUESTION NO: 61
A customer has an application that uses a small amount of capacity but has very high
performance requirements. The customer initially configured the LUNs using the Highest Available
Tier option and now wants to configure the FAST VP policy to ensure LUNs allocated to this
application always stay on higher performance storage.
22
EMC E20-547 Exam
D. Initially set the policy to Highest Available Tier, then Auto-Tier.
Answer: A
Explanation:
QUESTION NO: 62
A. 2.3
B. 2.4
C. 2.5
D. 2.6
Answer: D
Explanation:
QUESTION NO: 63
By default, what do you have to install on an ESX 4.x host to auto register with a VNX for Block
storage system?
A. Nothing; the host will automatically register with the VNX storage system
B. Only Unisphere Host Agent on the ESX host
C. Only Navisphere Secure CLI on the ESX host
D. Both Unisphere Host Agent and Navisphere CLI on the ESX host
Answer: A
Explanation:
QUESTION NO: 64
What EMC software product is used when replacing an I/O module on an EMC VNX Block Only
storage system?
23
EMC E20-547 Exam
D. Unisphere Server Utility
Answer: A
Explanation:
QUESTION NO: 65
A VNX SnapSure snapshot has recently been created on a production file system (PFS). The
second block in the PFS will be modified for the second time.
How will SnapSure handle the bitmap value for this file system update?
Answer: A
Explanation:
QUESTION NO: 66
What software features are included in the VNX Application Protection Suite?
Answer: A
Explanation:
QUESTION NO: 67
24
EMC E20-547 Exam
C. Tree quota policies are applied by default
D. Quotas are recommended on the root of a file system
Answer: A
Explanation:
QUESTION NO: 68
A user is preparing to install a disk drive. Where can they verify that the disk drive is compatible
with the VNX system?
Answer: A
Explanation:
QUESTION NO: 69
You are configuring the reserve LUN pool on a new VNX. What LUN types can be added to the
reserve LUN pool?
Answer: A
Explanation:
QUESTION NO: 70
A. UxFS
B. RawFS
25
EMC E20-547 Exam
C. MGFS
D. MPFS
Answer: A
Explanation:
QUESTION NO: 71
A customer has an application that uses a lot of capacity but has very low performance
requirements. Their new VNX is fully virtually provisioned and uses FAST VP storage pools. The
customer wants to configure the LUNs for this application on low performance storage.
Answer: A
Explanation:
QUESTION NO: 72
What describes the VNX Snapview Snapshot source LUN write process?
Answer: A
Explanation:
26
EMC E20-547 Exam
QUESTION NO: 73
A file system has auto_extend enabled. If the file system size is greater than the extend_size
value, what will happen when the file system reaches its HWM?
Answer: A
Explanation:
QUESTION NO: 74
When moving a VDM to a different Data Mover, what is one requirement of the target Data Mover?
A. Network interface names used on the source must be the same on the target.
B. The VDM must be loaded on the Source.
C. A CIFS server with the same name must exist on the Target.
D. The target Data Mover must be configured as a Standby.
Answer: A
Explanation:
QUESTION NO: 75
Answer: A
Explanation:
27
EMC E20-547 Exam
QUESTION NO: 76
Which VDM state results in the VDM being mounted during a Data Mover boot?
A. Loaded
B. Mounted
C. Unloaded
D. Ready
Answer: A
Explanation:
QUESTION NO: 77
A. Traditional LUNs
B. Thick pool LUNs
C. Thin pool LUNs
D. Clone groups
Answer: A
Explanation:
QUESTION NO: 78
Which tool is used to complete the initialization of only a VNX System for Block?
Answer: A
Explanation:
QUESTION NO: 79
28
EMC E20-547 Exam
When installing additional VNX (File) systems within an existing environment, what is a
requirement for Usermapper?
A. The additional VNXs will require the default Primary Usermapper for Data Mover 2 to be
changed to the Secondary Usermapper role.
B. The additional VNXs will require the default Primary Usermapper for the Control Station to be
changed to the Primary Usermapper role.
C. The additional VNXs will require the default Primary Usermapper for the Control Station to be
changed to the Secondary Usermapper role.
D. The additional VNXs will require the default Primary Usermapper for Data Mover 2 to be
changed to the Primary Usermapper role.
Answer: A
Explanation:
QUESTION NO: 80
The file system for an SQL database is running low on available capacity. The database is running
on a Windows Server 2008 host connected to a VNX Block array. The file system LUN is
configured using a traditional RAID Group.
How can the storage administrator add capacity without disrupting the users?
A. Create a larger LUN, use VNX LUN migration to migrate the data, and extend the File System
on the host
B. Create a larger LUN, use VDM migration to migrate the data, and extend the File System on
the host
C. Expand the thick pool LUN online without disruption to the host
D. The LUN cannot be expanded or migrated without disruption to the users
Answer: A
Explanation:
QUESTION NO: 81
What is the back-end bus speed, per lane, on the VNX series array?
A. 2 Gb
B. 4 Gb
C. 6 Gb
29
EMC E20-547 Exam
D. 8 Gb
Answer: C
Explanation:
QUESTION NO: 82
After presenting a LUN to a Windows Server 2003 host, which tool is used to align the data and
partition the disk?
A. diskpart
B. fdisk
C. chkdisk
D. format
Answer: A
Explanation:
QUESTION NO: 83
Which VNX feature improves the storage capacity utilization by only allocating storage as needed
for both Block and File storage?
Answer: A
Explanation:
QUESTION NO: 84
Before creating a CIFS server that will participate in a Windows Domain, what EMC best practice
should you follow?
30
EMC E20-547 Exam
C. Populating DNS with the new host entries
D. Performing a health check on the VNX system
Answer: A
Explanation:
QUESTION NO: 85
When provisioning a new logical unit, which RAID group property is the basis for limiting the LUN
capacity that can be specified?
Answer: A
Explanation:
QUESTION NO: 86
A storage administrator creates a clone of a source LUN. Which command should be used to
make the clone available to the secondary server?
A. fracture
B. synchronize
C. activate
D. start session
Answer: A
Explanation:
QUESTION NO: 87
Which component of Replication Manager controls replication jobs and stores data about each
replica?
A. Server
31
EMC E20-547 Exam
B. Database
C. Agent
D. Appliance
Answer: A
Explanation:
QUESTION NO: 88
What is the EMC-recommended cache page size for Microsoft Exchange 2007 environments?
A. 4 KB
B. 8 KB
C. 12 KB
D. 16 KB
Answer: B
Explanation:
QUESTION NO: 89
A. SAS
B. NL-SAS
C. Flash
D. Fibre Channel
Answer: A
Explanation:
QUESTION NO: 90
A storage administrator configured and presented storage pool LUNs to an MSCS cluster. A few
weeks later, the cluster administrator reported the LUNs are too large and smaller LUNs are
needed.
32
EMC E20-547 Exam
A. The MSCS Cluster will need to be rebuilt.
B. Use the LUN shrink feature.
C. The VLUN migration feature must be used.
D. Use SANCopy to migrate to smaller LUNs.
Answer: A
Explanation:
QUESTION NO: 91
A Storage Administrator is configuring a new VNX array. There are 10 MS Exchange Servers to
be connected to this array. Each of these Exchange servers hosts users from a different time zone
so performance spikes are expected at different times during the day.
Answer: B
Explanation:
QUESTION NO: 92
A storage administrator wants to enable data compression on inactive backup volumes that are
configured on RAID-group LUNs.
A. RAID-group LUNs are migrated to a new storage pool LUN with the compression attribute
enabled.
B. VNX does not support compression of RAID-group LUNs.
C. RAID-group LUNs are migrated to a new RAID-group LUN with the compression attribute
enabled.
D. RAID-group LUNs are compressed in place.
Answer: A
Explanation:
33
EMC E20-547 Exam
QUESTION NO: 93
Answer: A
Explanation:
QUESTION NO: 94
A. LUN shrink
B. LUN migration
C. Thin provisioning
D. RAID group defragmenting
Answer: A
Explanation:
QUESTION NO: 95
What is the minimum acceptable number of drives in a RAID 5 pool on a VNX array?
A. 3
B. 4
C. 5
D. 9
Answer: A
Explanation:
34
EMC E20-547 Exam
QUESTION NO: 96
What is the location of the host agent configuration file on a Linux host?
A. /etc/Unisphere/agent.config
B. /sbin/Unisphere/agent.config
C. /etc/init.d/agent.config
D. /etc/Unisphere/bin/agent.config
Answer: A
Explanation:
QUESTION NO: 97
Answer: A
Explanation:
QUESTION NO: 98
A storage administrator configured and presented storage pool LUNs to a Failover Cluster. A few
weeks later, the cluster administrator reported the LUNs are too large and smaller LUNs are
needed.
Answer: A
Explanation:
35
EMC E20-547 Exam
QUESTION NO: 99
Answer: A
Explanation:
For all Linux environments, how many Fibre Channel initiator ports are supported on a single
host?
A. 16
B. 8
C. 12
D. 24
Answer: A
Explanation:
A. /etc/audit/audit.rules
B. /etc/auditd.conf
C. /nas/audit/audit.rules
D. /nas/etc/audit.rules
Answer: A
36
EMC E20-547 Exam
Explanation:
Topic 2, Volume B
An administrator has finished configuring the zoning on their MDS-series switch and issues the
following command; zoneset activate name ActiveZS vsan 100
What happens?
Answer: C
Explanation:
What is the preferred method for partitioning VNX iSCSI LUNs attached to a Windows Server
2003 host?
A. diskpart
B. Disk Management
C. format
D. fdisk
Answer: A
Explanation:
What is the EMC-recommended VNX cache page size for Microsoft Exchange 2010
environments?
A. 4 KB
37
EMC E20-547 Exam
B. 8 KB
C. 12 KB
D. 16 KB
Answer: D
Explanation:
A customer wants to decrease the size of VNX pool LUNs presented to an MSCS cluster using the
LUN shrink feature.
Answer: A
Explanation:
What can be found from the Virtualization Host page in the VNX Unisphere Manager GUI?
Answer: A
Explanation:
38
EMC E20-547 Exam
A. Modifying SPA's Hostname
B. Modifying SPB's peer IP address
C. Changing the VNX Domain Manager from SPB to SPA
D. Changing the VNX Domain Manager from SPA to SPB
Answer: A
Explanation:
What is an advantage of the VASA feature when provisioning an ESXi host from a VNX array?
A. vCenter can directly communicate with the array to discover capabilities and monitor health
B. Some workload can be offloaded from the host to the array freeing up host resources
C. Hosts automatically register initiators with the array and optimize initiator configuration
D. Array connectivity is automatically load balanced and protected from path failures
Answer: A
Explanation:
How many bits are in the default self-signed certificate RSA keys?
A. 2048
B. 700
C. 1024
D. 4096
Answer: A
Explanation:
A. SAS
B. FC
39
EMC E20-547 Exam
C. SCSI
D. SATA
Answer: A
Explanation:
What is the default port that must be open in the firewall for Replication Manager Client Data?
A. 6543
B. 6542
C. 443
D. 65432
Answer: A
Explanation:
What is the only kind of LUN that VNX Snapshots can use?
A. Pool LUNs
B. Traditional LUNs
C. Clone Private LUNs
D. Reserved LUNs
Answer: A
Explanation:
40
EMC E20-547 Exam
Answer: A
Explanation:
In a VNX series array, how does FAST manage data in a heterogeneous storage pool?
A. It relocates more active data to faster drives and less active data to slower drives.
B. It relocates more active data from tier 1 storage without users noticing the difference.
C. It acts as an application accelerator and relocates LUNs based on performance.
D. It relocates LUNs from one tier to another to improve performance.
Answer: A
Explanation:
Answer: A
Explanation:
You are asked to create the maximum number of writeable snapshots from a production file
system per day, using equivalent intervals. How many snapshots can be created?
Answer: A
41
EMC E20-547 Exam
Explanation:
Counting from left to right, which octect identifies the SP and port number in the WWPN
50:06:01:62:47:20:32:88?
A. 4
B. 2
C. 3
D. 5
Answer: A
Explanation:
You are trying to create a virtual device on a VNX Data Mover in Unisphere under Settings >
Network > Settings For File > Devices > Create.
Answer: A
Explanation:
42
EMC E20-547 Exam
D. On the client
Answer: A
Explanation:
Answer: A
Explanation:
You are exporting a file system from a VNX Unified system at the subdirectory level. What is a key
consideration?
A. It is a best practice to configure group and user permissions for the subdirectory.
B. The file system must be exported again if the user and group permissions are modified.
C. When an export is deleted, subdirectories are automatically destroyed.
D. The lost+found and etc directories become visible to the client.
Answer: A
Explanation:
43
EMC E20-547 Exam
Answer: D
Explanation:
A. The peer SP acquires both the clone LUN and the fracture logs.
B. The peer SP acquires only the clone LUN.
C. The peer SP acquires only the fracture logs.
D. Neither the clone LUN nor the fracture log will be acquired by the peer SP.
Answer: A
Explanation:
Answer: D
Explanation:
What is the preferred method for partitioning VNX FC LUNs attached to a Windows Server 2008
R2 host?
A. Disk Management
B. format
C. fdisk
D. vtoc
Answer: A
44
EMC E20-547 Exam
Explanation:
An administrator is using the VNX file filtering feature. What is considered a valid filter file name?
A. extension_name
B. sharename@extension_name
C. NetBIOS_name@sharename@extension_name
D. share_name
Answer: A
Explanation:
A colleague reports FAST cache was just added to an existing VNX but FAST cache is still not
enabled on the FAST VP storage pools.
Answer: A
Explanation:
A. In Unisphere, use the listed navigation (Server Certificates for File, Personas), select the
desired VNX Data Mover and click the Generate button.
B. In Unisphere, use the listed navigation (Server Certificates for File, Personas), select the
desired VNX Control Station and click the Properties button.
45
EMC E20-547 Exam
C. In Unisphere, use the listed navigation (Server Certificates for Block, Personas), select the
desired VNX Control Station and click the Generate button.
D. In Unisphere, use the listed navigation (Server Certificates for Block, Personas), select the
desired VNX Data Mover and click the Properties button.
Answer: A
Explanation:
Answer: A
Explanation:
What should be installed to use the data compression feature of a VNX array?
Answer: A
Explanation:
46
EMC E20-547 Exam
C. HBAs with identical PCI interfaces from different vendors
D. Dual and quad channel HBAs from different vendors
Answer: A
Explanation:
A. RecoverPoint/SE CRR
B. VNX Replicator
C. Mirrorview/S
D. Mirrorview/A
Answer: A
Explanation:
Which features are included with the VNX Remote Protection Suite?
Answer: A
Explanation:
47
EMC E20-547 Exam
Answer: A
Explanation:
What happens when a new CIFS share is created using Unisphere and all available CIFS server
check boxes remain unchecked?
A. A global share is created and served by all CIFS servers residing on the Data Mover.
B. None of the CIFS servers residing on the Data Mover serve the newly created share.
C. The VNX system prompts for selection of at least one CIFS server.
D. A global share is created and served by the primary VDM.
Answer: A
Explanation:
A customer wants to decrease the size of VNX pool LUNs presented to a Failover Cluster using
the LUN shrink feature.
A. The LUN shrink feature will allow them to reduce LUN sizes for this cluster.
B. LUN shrink is only supported with stand-alone hosts.
C. The LUN shrink feature is not supported with Failover Clusters.
D. The LUN must not be defragmented prior to using the LUN shrink feature.
Answer: A
Explanation:
48
EMC E20-547 Exam
B. Host issues write.
Old data is copied to the reserve LUN pool.
New data is written to the source LUN.
C. Host issues write.
Data is written to the reserve LUN pool.
D. Host issues write.
Old data is copied to the source LUN.
New data is written to the reserve LUN pool.
Answer: A
Explanation:
When utilizing Unisphere Service Manager to upgrade a Unified VNX platform, which upgrade
type is supported?
A. Enabler installs
B. NAS code patches
C. NAS CS Code
D. Unisphere Language Pack installs
Answer: A
Explanation:
Answer: A
Explanation:
49
EMC E20-547 Exam
When performing switch maintenance, a customer accidentally disconnects all network
connections to an active VNX Data Mover. How does VNX handle this situation?
Answer: A
Explanation:
A colleague configured two 512 MB LUNs to be used as Clone Private LUNs (CPLs). When
configuring the CPLs, the two 512 MB LUNs do not appear in the list of available LUNs.
Answer: A
Explanation:
A. Usermapper
B. Microsoft SFU
C. VNX UNIX User Management
D. Local Files
Answer: A
Explanation:
50
EMC E20-547 Exam
QUESTION NO: 143
Which profiles define how the raw physical spindles are aggregated into VNX disk volumes?
A. Storage profiles
B. Volume profiles
C. System profiles
D. Disk profiles
Answer: A
Explanation:
A. Thin LUN.
B. Traditional LUN.
C. Storage pool Thick LUN.
D. Private LUN.
Answer: A
Explanation:
What port, by default, must be open in the firewall for Replication Manager server traffic?
A. 65432
B. 65431
C. 6543
D. 6542
Answer: A
Explanation:
51
EMC E20-547 Exam
Which VNX RAID type is suggested for the greatest data protection at the greatest cost in disk
space?
A. RAID 1/0
B. RAID 5
C. RAID 6
D. RAID 0
Answer: A
Explanation:
Answer: A
Explanation:
What happens when a reverse synchronization completes with Protected Restore Mode enabled?
Answer: A
Explanation:
52
EMC E20-547 Exam
QUESTION NO: 149
A. Admsnap utility
B. Unisphere Service Manager
C. Snapsure software
D. Secure CLI
Answer: A
Explanation:
A. Source/Destination IP Address.
B. Source/Destination TCP/UDP Ports.
C. First in/First out.
D. Source/Ddestination MAC Address
Answer: A
Explanation:
A colleague plans to use VNX Snapview Snapshots to make local copies of four data warehouse
LUNs. The LUNs to be snapped arE.
10 GB
20 GB
30 GB
100 GB
A. 4 GB
B. 8 GB
53
EMC E20-547 Exam
C. 2 GB
D. 16 GB
Answer: A
Explanation:
An administrator wants to add storage capacity to the cmsas_archive storage pool. They bind one
new RAID 6 SAS LUN and present this LUN for VNX for File and create a disk volume on the host
from it. They check the cmsas_archive storage pool but potential capacity is not increased.
A. There is a mismatch between cmsas_archive disk volumes and the newly created disk volume
type.
B. The disk volume is already assigned to the same storage pool but it is still unused.
C. The cmsas_archive pool was not manually extended with the newly created disk volume.
D. Disk volumes were not added to system-defined storage pools.
Answer: A
Explanation:
A. Neither the clone LUN nor the fracture logs will be acquired by the peer SP.
B. The peer SP acquires the clone LUN.
C. The peer SP acquires the fracture logs.
D. The peer SP acquires both the clone LUN and the fracture logs.
Answer: A
Explanation:
A customer has an application that uses a lot of capacity but has very low performance
54
EMC E20-547 Exam
requirements. The customer initially configured the LUNs using the Lowest Available Tier option
and now wants to configure the FAST VP policy to ensure LUNs allocated to this application
always stay on low performance storage.
Answer: A
Explanation:
A. 500 GB
B. 1 TB
C. 2 TB
D. 4 TB
Answer: C
Explanation:
A. server_ifconfig
B. server_sysconfig
C. server_devconfig
D. /sbin/ifconfig
Answer: A
Explanation:
55
EMC E20-547 Exam
QUESTION NO: 157
Answer: A
Explanation:
Answer: A
Explanation:
Concatenated metaLUNs:
Answer: A
Explanation:
56
EMC E20-547 Exam
How many local user accounts can be created per VNX CIFS Server?
A. 128
B. 256
C. 1024
D. 2048
Answer: A
Explanation:
A VNX snapshot can have how many snapshots of the source LUN?
A. 256
B. 128
C. 384
D. 8
Answer: A
Explanation:
In a MS 2007 Exchange Environment, what is the best practice VNX cache page setting?
A. 8kB
B. 1kB
C. 4kB
D. 16kB
Answer: A
Explanation:
57
EMC E20-547 Exam
What will prevent a storage administrator from deleting a storage group?
Answer: A
Explanation:
What is the length of RSA keys used to encrypt and decrypt network traffic in a VNX environment?
A. 2048 bits
B. 1024 bits
C. 2048 bytes
D. 1024 bytes
Answer: A
Explanation:
Answer: A
Explanation:
A storage administrator configured a SnapSure snapshot schedule for a heavily utilized production
file system. According to the schedule, three snapshots are to be created per hour, with the first
58
EMC E20-547 Exam
snapshot created at one minute past the hour.
After an hour, the administrator noticed that the first snapshot was not created on time.
A. The VNX for File database backup has started in the background.
B. The PFS SavVol has run out of space.
C. The VNX for File has experienced a network outage.
D. The HWM was not configured manually for Auto Extension.
Answer: A
Explanation:
When configuring a VNX Gateway system, which is a compatible backend storage configuration
method?
A. VNX Gateway system connected to a VNX Block Only system via FCoE
B. VNX Gateway system connected to a VNX Block Only system via FCiP
C. VNX Gateway system connected to a Symmetrix system via iSCSI
D. VNX Gateway system connected to a Symmetrix system via iFCP
Answer: A
Explanation:
Answer: A
Explanation:
59
EMC E20-547 Exam
Answer: A
Explanation:
You are provisioning a LUN on a VNX array with FAST VP enabled. In addition to Highest Tier
Available and Lowest Tier Available, what other tier option(s) is displayed?
A. Auto-Tier
B. Auto-Tier, No Data Movement
C. Optimize for Performance, No Data Movement
D. Optimize for Performance
Answer: A
Explanation:
The Host Initiators window can display up to how many hosts at one time?
A. 1000
B. 512
C. 1024
D. 2000
Answer: A
Explanation:
60
EMC E20-547 Exam
QUESTION NO: 172
A. Broadcast address
B. NTP address
C. NIS address
D. KDC address
Answer: A
Explanation:
A. UDP
B. FTP
C. TCP
D. PPP
Answer: A
Explanation:
You are setting up quotas on a file system that will serve up home directories to thousands of
users.
Answer: A
Explanation:
61
EMC E20-547 Exam
QUESTION NO: 175
Answer: A
Explanation:
A. Traditional LUN
B. Thick LUN
C. Thin LUN
D. All LUN types are supported
Answer: A
Explanation:
Which VNX Remote Protection Suite method features a read-only copy of source file systems?
A. VNX Replicator
B. Mirrorview/A
C. Mirrorview/S
D. RecoverPoint/SE
Answer: A
Explanation:
62
EMC E20-547 Exam
Which three administrative user authentication scopes are provided by VNX?
Answer: A
Explanation:
When deleting a Snapsure Snapshot what action is required for a successful deletion?
Answer: A
Explanation:
In an environment where VNX shares are mainly used by a Web Application Server, the
administrator notices very high CPU load on the Antivirus servers used by CAVA. What could be
the reason?
Answer: A
Explanation:
63
EMC E20-547 Exam
Which statement is valid regarding SnapSure writeable snapshots?
A. A scheduled refresh on the read-only snapshot will fail if a writeable snapshot exists.
B. A baseline snapshot must be deleted prior to deleting the writeable snapshot.
C. A writeable snapshot can be mounted RW during the background restore.
D. Snapshots can be created from a writeable snapshot.
Answer: A
Explanation:
Answer: A
Explanation:
What is the default port used for secure LDAP (LDAPS) communications on a VNX system?
A. 389
B. 443
C. 563
D. 636
Answer: D
Explanation:
For LACP Load Balancing Considerations, what setting provides the best load balancing per host?
64
EMC E20-547 Exam
A. Source/Destination TCP/UDP Ports.
B. Source/Destination MAC Address
C. Source/Destination IP Address.
D. Session ID number.
Answer: A
Explanation:
You are implementing a CIFS solution and will be using Virtual Data Movers. Which CIFS dynamic
configuration information is contained within the Virtual Data Mover?
Answer: A
Explanation:
An administrator tries to modify the quota settings on a CIFS share from a Windows Server 2003
host, but the Quota tab does not exist in the network drive properties. What could be a possible
cause?
A. Exporting is implemented at the file system subdirectory level on VNX OE for File.
B. Windows users cannot modify the quota settings.
C. The user does not have administrator privileges on this share.
D. Quotas can be managed only with Windows Server 2008.
Answer: A
Explanation:
65
EMC E20-547 Exam
A. CIFS
B. NFS
C. FTP
D. SFTP
Answer: A
Explanation:
What EMC software product contains a collection of tools that helps you perform basic hardware
and software maintenance tasks on an EMC VNX Unified storage system?
Answer: A
Explanation:
Answer: A
Explanation:
A new SAN attached host is unable to see the LUNs created for it on a VNX array. When looking
at the host initiators to verify connectivity the Storage Group listed for the host is ~management.
66
EMC E20-547 Exam
Which step was missed when provisioning this host?
Answer: A
Explanation:
An administrator creates a 500 GB file system and implements VNX SnapSure on it. What is the
initial size of the SavVol that was created?
A. 5 GB
B. 20 GB
C. 32 GB
D. 50 GB
Answer: B
Explanation:
A company has many VNX file systems that they currently export using NFS. Their goal is to
simplify the management of these file systems for the Linux client workstations. How can the
storage team help the company achieve this goal?
A. Create a nested mount file system to export all the file systems as a single namespace to
mount on the clients.
B. Create administrative exports to the file system roots and community exports for their
subdirectories.
C. Create AVM file systems and enable auto extend on the file systems.
D. Mount each file system manually to maintain control of individual export permissions.
Answer: A
Explanation:
67
EMC E20-547 Exam
QUESTION NO: 193
Answer: A
Explanation:
Which VNX RAID type is suggested for performance and protection for small block random writes
to disk?
A. RAID 1/0
B. RAID 0
C. RAID 5
D. RAID 6
Answer: A
Explanation:
What can be found from the Virtualization Host page in the VNX Unisphere Manager GUI?
Answer: A
Explanation:
68
EMC E20-547 Exam
What is a feature available to a virtual Data Mover?
A. Usermapper client
B. Standby Data Mover
C. Virus Checker
D. iSCSI Server
Answer: A
Explanation:
Answer: A
Explanation:
A Storage Administrator created several new LUNs for an existing SAN attached Linux host. Some
of the new LUNs are owned by SPA & some are owned by SPB. Linux can only see some of the
new LUNs.
A. Check the EMC Host Connectivity Guide for Linux to verify the maximum number of LUNs
visible to the host
B. Check the zoning to verify that all HBAs can see all of the ports on each Storage Processor
C. Check the agent.config file on the host to verify the maximum number of LUNs the host can
manage
D. Check the LUN ownership of each LUN to make sure none are trespassed
69
EMC E20-547 Exam
Answer: A
Explanation:
Which optional software is commonly installed to provide full high availability from a Windows host
system to a VNX array?
Answer: A
Explanation:
Which I/O module combination could be used in Slot 0 within a VNX Gateway X-Blade?
A. a. and c.
B. a. and b.
C. a., b., and d.
70
EMC E20-547 Exam
D. a., c., and e.
Answer: A
Explanation:
Displayed is a single VNX X-Blade in a DME. What does the indicated number 2 refer to on the
numeric display?
Answer: A
Explanation:
71
EMC E20-547 Exam
A. DAE5S
B. DAE6S
C. DAE7S
D. DAE3S
Answer: A
Explanation:
A. DAE6S
B. DAE5S
C. DAE7S
D. DAE3S
Answer: A
72