Académique Documents
Professionnel Documents
Culture Documents
SMARTDISCRETES
MLP2N06CL
Motorola Preferred Device
Motorola TMOS
Motorola, Inc. 1996 Power MOSFET Transistor Device Data 1
MLP2N06CL
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
DraintoSource Breakdown Voltage V(BR)DSS Vdc
(ID = 20 mAdc, VGS = 0 Vdc) 58 62 66
(ID = 20 mAdc, VGS = 0 Vdc, TJ = 150C) 58 62 66
Zero Gate Voltage Drain Current IDSS Adc
(VDS = 40 Vdc, VGS = 0 Vdc) 0.6 5.0
(VDS = 40 Vdc, VGS = 0 Vdc, TJ = 150C) 6.0 20
GateSource Leakage Current IGSS Adc
(VG = 5.0 Vdc, VDS = 0 Vdc) 0.5 5.0
(VG = 5.0 Vdc, VDS = 0 Vdc, TJ = 150C) 1.0 20
ON CHARACTERISTICS(1)
Gate Threshold Voltage VGS(th) Vdc
(ID = 250 Adc, VDS = VGS) 1.0 1.5 2.0
(ID = 250 Adc, VDS = VGS, TJ = 150C) 0.6 1 1.6
Static Drain Current Limit ID(lim) Adc
(VGS = 5.0 Vdc, VDS = 10 Vdc) 3.8 4.4 5.2
(VGS = 5.0 Vdc, VDS = 10 Vdc, TJ = 150C) 1.6 2.4 2.9
Static DraintoSource OnResistance RDS(on) Ohms
(ID = 1.0 Adc, VGS = 5.0 Vdc) 0.3 0.4
(ID = 1.0 Adc, VGS = 5.0 Vdc, TJ = 150C) 0.53 0.7
Forward Transconductance (ID = 1.0 Adc, VDS = 10 Vdc) gFS 1.0 1.4 mhos
Static SourcetoDrain Diode Voltage VSD Vdc
(IS = 1.0 Adc, VGS = 0 Vdc) 1.1 1.5
SWITCHING CHARACTERISTICS(2)
TurnOn Delay Time td(on) 1.0 1.5 s
Rise Time (VDD = 30 Vdc, ID = 1.0 Adc, tr 3.0 5.0
TurnOff Delay Time VGS(on) = 5.0 Vdc, RGS = 25 Ohms) td(off) 5.0 8.0
Fall Time tf 3.0 5.0
(1) Pulse Test: Pulse Width 300 s, Duty Cycle 2%.
(2) Switching characteristics are independent of operating junction temperature.
5 4.0
TJ = 25C 6.0 V VDS 7.5 V 55C 25C
5.5 V 3.5
I D , DRAIN CURRENT (AMPS)
4 5.0 V TJ = 150C
I D , DRAIN CURRENT (AMPS)
4.5 V 3.0
4.0 V
3 2.5
3.5 V
2.0
3.0 V
2 1.5
1.0
1
2.5 V
0.5
2.0 V
0 0
0 2 4 6 8 0 1 2 3 4 5 6 7 8
VDS, DRAINTOSOURCE VOLTAGE (VOLTS) VGS, GATETOSOURCE VOLTAGE (VOLTS)
Figure 1. Output Characteristics Figure 2. Transfer Function
it, and thus lowering the voltage across the gatetosource of 0.5
the power MOSFET and limiting the current. The current limit is
VGS = 4 V
temperature dependent as shown in Figure 3, and decreases 0.4
from about 2.3 Amps at 25C to about 1.3 Amps at 150C.
Since the MLP2N06CL continues to conduct current and dissi- VGS = 5 V
0.3
pate power during a shorted load condition, it is important to pro-
vide sufficient heatsinking to limit the device junction temperature
0.2
to a maximum of 150C.
The metal current sense resistor R2 adds about 0.4 ohms to
the power MOSFETs onresistance, but the effect of tempera- 0.1
ture on the combination is less than on a standard MOSFET due
to the lower temperature coefficient of R2. The onresistance 0
50 0 50 100 150
variation with temperature for gate voltages of 4 and 5 Volts is
TJ, JUNCTION TEMPERATURE (C)
shown in Figure 5.
Backtoback polysilicon diodes between gate and source Figure 5. OnResistance Variation With
provide ESD protection to greater than 2 kV, HBM. This onchip Temperature
protection feature eliminates the need for an external Zener
diode for systems with potentially heavy line transients.
VOLTAGE (VOLTS)
60 62.5
62.0
40 61.5
61.0
20
60.5
0 60.0
25 50 75 100 125 150 50 0 50 100 150
TJ, STARTING JUNCTION TEMPERATURE (C) TJ = JUNCTION TEMPERATURE
TC = 25C
MAXIMUM DC VOLTAGE CONSIDERATIONS
The maximum draintosource voltage that can be contin- dc
uously applied across the MLP2N06CL when it is in current 10 ms
limit is a function of the power that must be dissipated. This 1.0 1 ms
power is determined by the maximum current limit at maxi-
mum rated operating temperature (1.8 A at 150C) and not
the RDS(on). The maximum voltage can be calculated by the RDS(on) LIMIT
following equation: THERMAL LIMIT
PACKAGE LIMIT
(150 TA) 0.1
Vsupply = 0.1 1.0 10 100
ID(lim) (RJC + RCA)
VDS, DRAINTOSOURCE VOLTAGE (VOLTS)
where the value of RCA is determined by the heatsink that is Figure 8. Maximum Rated Forward Bias
being used in the application. Safe Operating Area (MLP2N06CL)
0.2
0.1
0.05 P(pk)
0.1 RJC(t) = r(t) RJC
0.02
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
0.01 t1 READ TIME AT t1
t2 TJ(pk) TC = P(pk) RJC(t)
SINGLE PULSE DUTY CYCLE, D = t1/t2
0.01
1.0E 05 1.0E 04 1.0E 03 1.0E 02 1.0E 01 1.0E+00 1.0E+01
t, TIME (s)
Vin DUT
PULSE GENERATOR OUTPUT, Vout
z = 50 10%
Rgen INVERTED
50
90%
50
50% 50%
INPUT, Vin PULSE WIDTH
10%
ACTIVE CLAMPING
SMARTDISCRETES technology can provide onchip real- elements provide greater than 2.0 kV electrostatic voltage
ization of the popular gatetosource and gatetodrain protection.
Zener diode clamp elements. Until recently, such features The avalanche voltage of the gatetodrain voltage clamp
have been implemented only with discrete components is set less than that of the power MOSFET device. As soon
which consume board space and add system cost. The as the draintosource voltage exceeds this avalanche volt-
SMARTDISCRETES technology approach economically age, the resulting gatetodrain Zener current builds a gate
melds these features and the power chip with only a slight voltage across the gatetosource impedance, turning on
increase in chip area. the power device which then conducts the current. Since vir-
In practice, backtoback diode elements are formed in a tually all of the current is carried by the power device, the
polysilicon region monolithicly integrated with, but electrically
gatetodrain voltage clamp element may be small in size.
isolated from, the main device structure. Each backtoback
This technique of establishing a temperature compensated
diode element provides a temperature compensated voltage
draintosource sustaining voltage (Figure 7) effectively re-
element of about 7.2 volts. As the polysilicon region is
formed on top of silicon dioxide, the diode elements are free moves the possibility of draintosource avalanche in the
from direct interaction with the conduction regions of the power device.
power device, thus eliminating parasitic electrical effects The gatetodrain voltage clamp technique is particularly
while maintaining excellent thermal coupling. useful for snubbing loads where the inductive energy would
To achieve high gatetodrain clamp voltages, several otherwise avalanche the power device. An improvement in
voltage elements are strung together; the MLP2N06CL uses ruggedness of at least four times has been observed when
8 such elements. Customarily, two voltage elements are inductive energy is dissipated in the gatetodrain clamped
used to provide a 14.4 volt gatetosource voltage clamp. conduction mode rather than in the more stressful gateto
For the MLP2N06CL, the integrated gatetosource voltage source avalanche mode.
PACKAGE DIMENSIONS
NOTES:
SEATING STYLE 5: 1. DIMENSIONING AND TOLERANCING PER ANSI
T PLANE PIN 1. GATE Y14.5M, 1982.
2. DRAIN 2. CONTROLLING DIMENSION: INCH.
B F C 3. SOURCE 3. DIMENSION Z DEFINES A ZONE WHERE ALL
T S 4. DRAIN BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
4
INCHES MILLIMETERS
A DIM MIN MAX MIN MAX
Q A 0.570 0.620 14.48 15.75
1 2 3 B 0.380 0.405 9.66 10.28
U C 0.160 0.190 4.07 4.82
H D 0.025 0.035 0.64 0.88
F 0.142 0.147 3.61 3.73
K G 0.095 0.105 2.42 2.66
Z H 0.110 0.155 2.80 3.93
J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
L R N 0.190 0.210 4.83 5.33
V Q 0.100 0.120 2.54 3.04
J R 0.080 0.110 2.04 2.79
G S 0.045 0.055 1.15 1.39
T 0.235 0.255 5.97 6.47
D U 0.000 0.050 0.00 1.27
N V 0.045 1.15
Z 0.080 2.04
CASE 221A06
ISSUE Y
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MFAX: RMFAX0@email.sps.mot.com TOUCHTONE (602) 2446609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://DesignNET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298
*MLP2N06CL/D*
6 Motorola TMOS Power MOSFET Transistor Device Data
MLP2N06CL/D