Académique Documents
Professionnel Documents
Culture Documents
Fiber alignment method Core (LID) Core CDS V-Groove V-Groove Mechanical
and CDS Splice
Touch screen
Tilt base
Built-in GPS system
Maintenance-free
electrodes (P&D)
One-step cleaver
Diamond cleaver blade
FuseFlex Connector Compatible Special Order
Automatic compensation for
environmental influences
Typical total splice cycle time 33 sec (CDS) 33 sec 60 sec 31 sec
(splice time plus oven)
Splice loss data storage 10,000 with GPS 10,000 with GPS 10,000 10,000
Selecting the
Right Fusion Splicer
OptiSplice
Ribbon Fusion
Single-Mode and Multimode, Multimode
Splicer or Single-Mode Only What Fiber Only
Types do I Need
to Splice?
Old Fiber
(questionable
geometry) New or Old Fiber New Fiber
(questionable geometry?)
OptiSplice One
Fusion Splicer
Moderate Spec
Tight Spec ( 0.05 dB) What is the (0.10 dB or 0.20 dB)
Single-Mode SpliceLoss
Requirement?
OptiSplice M90e
or OptiSplice CDS OptiSplice One
Fusion Splicers Fusion Splicer
Equipped with both LID-SYSTEM Unit and Built-in interactive training videos
CDS 3-axis core-alignment technologies
Fastest total splice cycle time in the industry
Utilizes automatic fusion time to optimize
Ultrafast heat-shrink oven (15 seconds on
each splice (LID-SYSTEM)
40 mm sleeve; 20 seconds on 60 mm sleeve)
Loss measurement provided at end of
Two USB ports for easy data output and upgrades
splice (LID-SYSTEM)
Integrated GPS system automatically adjusts
Maintenance-free, precise and durable
for altitude changes and allows storing of splice
electrodes for 7,000 splices
location coordinates
Touch screen with graphical user interface
High-capacity internal battery good for
130 splice cycles
Maintenance-free, precise and durable Two USB ports for easy data output and
electrodes for 7,000 splices upgrades
Touch screen with graphical user interface Integrated GPS system automatically adjusts
for altitude changes and allows storing of
Built-in interactive training videos
splice location coordinates
Fastest total splice cycle time in the industry
High-capacity internal battery good for
Ultrafast heat-shrink oven (15 seconds on 130 splice cycles
40 mm sleeve; 20 seconds on 60 mm sleeve)
Fastest total splice cycle time in the industry High-contrast, transflective LCD screen
Graphical user interface Fixed V-groove fiber alignment
Ergonomic layout FuseFlex termination system compatible
High-capacity Li-Ion battery Interactive training videos
For use with 2-, 4-, 6-, 8- or 12-fiber ribbons Fast and reliable operation
or single fibers
High-capacity Li-Ion battery
Graphical user interface
Dual cameras provide clear fiber view
High-contrast, transflective LCD and accurate splice loss estimate
Ergonomic layout in a compact size Interactive training videos
2806031-01 Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 60 mm long)
2806032-01 Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 40 mm long)
2806031-04 Heat-Shrink Mass Splice Protector Parts, two- or four-fiber ribbon (package of 25; 40 mm long)
2806031-012 Heat-Shrink Mass Splice Protector Parts, six- or 12-fiber ribbon (package of 25; 40 mm long)
Type of Testing
Component Attenuation
End-to-End Attenuation Connector
(splice loss, connector Troubleshooting
(Channel Loss) Inspection
loss, ORL, length, etc.)
Checking
OTDR Is data Polarity
storage (VFL-350)
needed?
Where do you
No Yes want to see the
output? Identifying
Faults
LTK-400 Series OTS-600 Series
Handheld Handheld
OV-1000
OV-Mini
Do you want an Basic or Deluxe
integrated power
meter and VFL?
Stand-alone Computer
LCD Display (VIPROBE-DUAL &
(VIP-LCD-KIT) VIPROBE-USB2)
No Yes
Windows CE technology for fast power-up USB ports and compact flash slot
time from sleep mode
Rugged and water/chemical resistant
80 MB internal flash memory
OptiTest function features one-touch testing Transreflective color display for clear viewing
for top user-friendliness results, even under bright sunlight
USB port (memory stock compatible) for easy Superior automated analysis provides a more
data transfer effective, easier and faster diagnosis
Large internal memory for up to 500 results
NTSC video output format for high-level Coaxial illumination provides clear view of
analog video quality end-face condition
Thumbwheel design for easy, one-hand Connection to OV-MINI and OV-1000s platforms
operation eliminates the need for an external monitor
Checks multimode and single-mode fibers Glowing red light makes it easy to detect
breaks or improper termination
Rugged compact design for daily onsite use
Ordering Information
Part Number Description
Splice Equipment
M90E-0SM-T-H M90e Fusion Splicer with FBC-006 Cleaver, carrying case with wheels, fast heat-shrink oven,
splice tray holder, AC power supply with US cord, Li-Ion battery with external charger, 1-year
limited warranty, operators manual, USB worklight, maintenance tool kit
OSCDS-0SM-T-H OptiSplice CDS Fusion Splicer with FBC-006 Cleaver, carrying case with wheels, fast heat-
shrink oven, splice tray holder, AC power supply with US cord, Li-Ion battery with external
charger, 1-year limited warranty, operators manual CD, USB worklight, maintenance tool kit
OS1-0SM-T-H OptiSplice One Handheld Fusion Splicer with cleaver, 1 set of 250 m handlers, 1 set of 900 m
handlers, fast heat-shrink oven, carrying case, Li-Ion battery with external charger, AC power
supply with US cord, operators manual (English), detachable splice tray holder/screen cover
and 1-year limited warranty
OSR-0SM-T-H OptiSplice Ribbon Handheld Fusion Splicer with cleaver, thermal stripper, 1 set of 12-fiber
handlers, fast heat-shrink oven, carrying case, Li-Ion battery with external charger, AC power
supply with US cord, operators manual (English), detachable splice tray holder/screen cover
and 1-year limited warranty
TKT-FIBERTECH-PRO Advanced Tool Kit for the fiber optic installation professional with pop-up handle and wheels
includes tools for preparing fiber optic cables, closures and fiber optic hardware in addition to
cable cleaners, first aid kit, LED headlamp, safety vest, safety glasses and gloves (does not
include midspan access tools); see Contents List for complete list of items
TKT-FTTX-LT Tools required to perform a midspan access on a loose tube cable, including the opening of a
small buffer tube (2.4 - 2.6 mm)
TKT-FTTX-RIBBON Tool Kit designed for performing a midspan access of a ribbon cable, including opening the
ribbon cable jacket, performing a midspan on the central tube and splitting a ribbon into smaller
ribbons; contains both the Universal Access Tool (UAT3) and the ribbon splitting tool (RST)
TKT-026-01A Fiber Organizer Tape Applicator (FOTA) Ribbonizer Tool Kit for 6- or 12-fiber ribbons includes
FOTA tool, tape and basic tools
UAT3-000 Universal Access Tool is designed for midspan access applications for central tube design
cables; OD range: 5 mm to 24 mm
Splice Equipment
OFT-000 Optical Fiber Access Tool (OFAT) for midspan on minibundle or ALTOS Cable, 2.4 mm
to 3.0 mm tubes
NFT-000 No-Slack Fiber Access Tool (NOFAT) for midspan on taut cable
RST-000 Splitter Ribbon Fiber Splitter Tool (Corning Cable Systems Ribbon Splitter Tool)
RPOC-001 Ripcord Puller for outdoor cable fits into a cordless screwdriver for use in preparing outdoor cables
Test Equipment
1000DK-MDSD Dual Multimode (27/26 dB) and Dual Single-mode (35/34 dB) Deluxe OTDR Kit includes
OV-1000 mainframe with power meter and VFL, multimode/single-mode module
1000BK-MDSD Dual Multimode (27/26 dB) and Dual Single-mode (35/34 dB) Basic OTDR Kit includes
OV-1000 mainframe, multimode/single-mode module
MiniBK MiniBK Multimode/Single-mode OTDR with power supply, Li-Ion batteries, CD with OTSView
PC emulation software and users manual, USB data transfer cable, SC and ST Compatible
OTDR port, cleaning supplies and soft carrying case.
MiniDK MiniDK Multimode/Single-mode OTDR with power meter and VFL, power supply, video
inspection software, Li-Ion batteries, CD with OTSView PC emulation software and users
manual, USB data transfer cable, SC and ST Compatible OTDR port, cleaning supplies
and soft carrying case.
MiniXK MiniXK Multimode/Single-mode OTDR with power meter and VFL, video inspection probe,
power supply, video inspection software, Li-Ion batteries, CD with OTSView PC emulation
software and users manual, USB data transfer cable, SC and ST Compatible OTDR port,
cleaning supplies and soft carrying case.
MiniXK-TK MiniXK Multimode/Single-mode OTDR with power meter and VFL, video inspection probe,
separate handheld multimode/single-mode source, power supply, video inspection probe
software, Li-Ion batteries, CD with OTSView PC emulation software and users manual, USB
data transfer cable, SC and ST Compatible OTDR port, cleaning supplies and soft carrying case.
PTF, PTB and NSS Products built to customers specs (there are limitations)
VFL-350 Visual Fault Locator, 635 nm, pen-style, 6.5 in x 0.5 in, universal 2.5 mm connector adapter
(LC 1.5 mm adapters are sold separately)
VIPROBE-DUAL Video Inspection Probe Kit for use with OV-1000 and OTS-600; 200x/400x magnification with
coaxial lighting; includes bulkhead tip set for SC, LC, FC and ST Compatible; universal 2.5 mm
and 1.25 mm tips
Wheres My Order
www.corning.com/cablesystems/wmo