6 To delete an 1830 PSS user configuration .....................
7-9 8 1830 PSS device management 8-
1 8.1 Device management overview ........................................................ 8-2 Procedure 8-1 To view an invalid or stale optical link ........................ 8-2 8.2 Out-of-band and in-band management .............................................. 8-2 Out-of-band management .......................................................... 8- 2 In-band management ................................................................ 8-3 8.3 Switching modes between SONET and SDH ......................................... 8-4 8.4 Backing up and restoring files on the 1830 PSS NEs ............................... 8-5 Encrypted file transfer .............................................................. 8-5 Procedure 8-2 To configure an 1830 PSS WDM backup/restore policy ...... 8-5 Procedure 8-3 To configure an 1830 PSS OCS backup/restore policy ....... 8-7 Procedure 8-4 To perform an on- demand 1830 PSS backup .................. 8-8 Procedure 8-5 To restore a device configuration backup other than the most recent .......................................................... 8-9 Procedure 8-6 To import a device backup to the 5620 SAM database ...... 8-9 Procedure 8-7 To restore a device configuration backup other than the most recent ......................................................... 8-10 Procedure 8-8 To force restore a device configuration ...................... 8-11 Procedure 8-9 To export a device backup to a file ........................... 8-12 8.5 Managing NE software upgrades ..................................................... 8-12 8.6 Procedures to manage NE software upgrades ..................................... 8-13 Procedure 8-10 To import 1830 PSS WDM device software image files to the 5620 SAM database.............................................. 8-13 Procedure 8-11 To import 1830 PSS OCS device software image files to the 5620 SAM database.............................................. 8-15 Procedure 8-12 To create a software upgrade policy ........................8-16 Procedure 8-13 To assign a software upgrade policy to an 1830 PSS ...... 8-17 Procedure 8-14 To perform an immediate software upgrade
Procedure 7-2 To configure a discovery rule 1 Choose AdministrationDiscovery Manager from
the 5620 SAM main menu. The Discovery Manager form opens with the Discovery Rules tab displayed. 2 Click Create. The Create Discovery Rule - Specify General Attributes step form opens. 3 Configure the parameters. 4 Select a topology group. 5 Configure the Discovery Protocol parameter to SNMP for WDM devices and TL1 for OCS devices. 6 Click Next. The Create Discovery Rule - Add Rule Elements form opens. 7 Click Create to add a new rule element. The Topology Discovery Rule Element (Create) form opens. 8 Configure the required parameters and click OK. 9 Repeat steps 7 to 8 to create an additional rule element, if required. 10 Click Next. The Add Auto Discovery Rule Elements ACL form opens. 11 Click Create. The Auto Discovery Rule Element ACL (Create) form opens. 12 Configure the parameters and click OK. 13 Repeat steps 11 to 12 to create an additional automatic discovery rule element, if required. 14 Click Next. The Create Discovery Rule - Configure Mediation Security form opens. 15 Select the mediation security policy in the following panels, if required. Read Access Mediation Policy Write Access Mediation Policy Trap Access Mediation Policy Note When you close the Discovery Manager form, the 5620 SAM scans the network using the discovery rule, if the Administrative State parameter of the discovery rule is set to Up. Note If the selected topology group reaches the maximum element limit, any additional discovered NEs are automatically added to the Discovered NEs group. Note The OCS NE mediation requires only the Read Access Mediat Procedure 7-3 To configure a user account on an 1830 PSS device 1 Choose AdministrationSecurityNE User Configuration from the 5620 SAM main menu. The NE User Configuration form opens. 2 Click Create. The NE User Global Policy (Create) form opens. 3 Perform one of the following: a Configure the parameters for SNMPv2 (Console) user. b Configure the parameters for SNMPv3 user. 4 Configure the authentication parameters if you have SNMPv3 permissions. i Click on the SNMPv3 tab. ii Configure the parameters. iii Click OK. 5 Click Apply to save the changes and close the form. You must distribute the users to specific devices, as described in Procedure 7-4. Note When you close the Discovery Manager form, the 5620 SAM scans the network using the discovery rule, if the Administrative State parameter of the discovery rule is set to Up. Note The 1830 PSS supports only MD5 for the Authentication Protocol parameter and the AES128 for Privacy protocol parameter. Release 12.0 R7 | December 2014 | 3HE 08859 AAAG TQZZA Edition 01 7 1830 PSS discovery Alcatel-Lucent 5620 Service Aware Manager 7-7 5620 SAM Optical User Guide Procedure 7-4 To distribute a user account to an 1830 PSS devices 1 Create the user as described in Procedure 7-3. 2 Choose AdministrationSecurityNE User Configuration. The NE User Configuration form opens. 3 Choose a user and click Properties. The NE User - Global Policy (Edit) form opens. 4 When the Configuration Mode parameter is Draft, the Distribute button or the Distribute option under the More Actions button, is disabled and the policy cannot be distributed to the 1830 PSS devices. You must first release the policy for distribution. If the Configuration Mode parameter is Released, go to step 5. i Click Switch Mode and a dialog box appears. ii Click Yes and the configuration mode of the policy is changed to Released. The Release - SR Local User form opens with a list of available nodes. iii Go to step 6. 5 Click Distribute. The Distribute - SR Local User form opens. 6 Choose the 1830 PSS devices from the Available Nodes list and click on the right arrow icon. The devices move to the Selected Nodes list on the right side of the form. 7 Click Distribute. The policy is distributed to the devices. 8 Close the Distribute - SR Local User form. The NE User - Global Policy (Edit) form reappears. 9 Configure the distribution mode of the local definitions. i Click Distribution Mode. The Distribution Mode - SR Local User form opens. ii Configure the Distribution Mode parameter. The local definitions that are configured with the specified distribution mode are listed. iii Choose one ore more rows from the Available Nodes list. iv Click on the right arrow icon. The devices move to the Selected Nodes list on the right side of the form. Release 12.0 R7 | December 2014 | 3HE 08859 AAAG TQZZA Edition 01 7 1830 PSS discovery 7-8 Alcatel-Lucent 5620 Service Aware Manager 5620 SAM Optical User Guide v Click Sync With Global or Local Edit, depending on the distribution mode of the specified devices. vi Close the Distribution Mode - SR Local User form. The NE User - Global (Edit) form reappears. 10 Close the forms. Procedure 7-5 To configure local or global 1830 PSS user 1 Choose AdministrationSecurityNE User Configuration. The NE User Configuration form opens. 2 Choose an entry and click Properties. The NE User Global Policy (Edit) form opens with the General tab displayed. 3 Perform one of the following: a Configure the global user. i Configure the parameters on the General tab. ii Click on the SNMPv3 tab for SNMPv3 users. iii Configure the parameters. iv Distribute the user account policy to specific devices. See Procedure 7-4. b To modify local user definitions, perform the following: i Click on the Local Definitions tab. The 1830 PSS users are listed. ii Choose an entry and click Properties. The NE User Local Policy (Edit) form opens. iii Click Switch to change the Distribution Mode parameter to Local Edit Only. iv Configure the parameters. v Click on the SNMPv3 tab for SNMPv3 users. Note The SNMPv3 users cannot be distributed on 1830 PSS devices discovered using SNMPv2. Release 12.0 R7 | December 2014 | 3HE 08859 AAAG TQZZ