Académique Documents
Professionnel Documents
Culture Documents
PDVSA N TITULO
APROB. Luis Tovar FECHA NOV.98 APROB. Oscar Adrianzn FECHA NOV.98
Indice
1 OBJETO Y CAMPO DE APLICACION . . . . . . . . . . . . . . . . . . . . . . . . 2
2 NORMAS A CONSULTAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 REQUISITOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1 Requisitos de la Materia Prima . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2 Requisitos del Revestimiento Aplicado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 MANEJO, ALMACENAMIENTO Y EMPAQUE . . . . . . . . . . . . . . . . . 7
4.1 Resina Epxica en Polvo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 Resina de Poliolefinas (adhesivo y/o capa externa) . . . . . . . . . . . . . . . . . . 7
5 MARCAJE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6 BASES DE COMPRA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 Orden de Compra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2 Certificado de Calidad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7 BIBLIOGRAFIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ESPECIFICACION TECNICA DE MATERIALES PDVSA EM0101/16
2 NORMAS A CONSULTAR
Las ltimas ediciones o revisiones de las siguientes normas o especificaciones
forman parte de la presente especificacin:
ASTM D 570 Standard Test Methods for Water Absortion of
Plastics.
ASTM D 792 Standard Test Methods for Specific Gravity (Relative
Density) and Density of Plastics by Displacement.
ASTM D 1002 Test Method for Strength Properties of Adhesives in
Shear by Tension Loading. (MetaltoMetal).
ASTM D 1044 Test Method for Resistance of Transparent Plastics to
Surface Abrasion.
ASTM D 1238 Standard Test Method for Flow Rates or
Thermoplastics by Extrusion Plastometer.
ASTM D 1505 Standard Test Method for Density of Plastics by
Plastics by the DensityGradient Technique.
ASTM D 1525 Standard Test Method for Vicat Softening
Temperature of Plastics.
ASTM D 1921 Standard Test for Particle Size (Sieve Analysis) of
Plastics Materials.
ASTM D 3363 Test Method for Film Hardness by Pencil Test.
ASTM D 4217 Test Method for Gel Time of Thermosetting Coating
Powder.
ASTM G 8 Test Methods for Cathodic Disbonding of Pipeline
Coating.
ASTM G 14 Test Method for Impact Resistance of Pipeline
Coatings (Falling Weight Test).
ASTM G 17 Test Method for Penetration Resistance of Pipeline
Coatings (Blunt Rod).
AWWA C213 Standard for FusionBonded Epoxy Coating for the
Interior and Exterior of Steel Water Pipelines.
ESPECIFICACION TECNICA DE MATERIALES PDVSA EM0101/16
3 REQUISITOS
3.1 Requisitos de la Materia Prima
3.1.1 Requisitos de la Resina Epxica en Polvo (Primera Capa)
Color Especificado por el
fabricante
Contenido de humedad 0.5% mximo CAN/CSAZ
245.20
Gravedad Especfica 1,4 0,1 ASTM D 792
Cubrimiento al 100% de Especificado por el
eficiencia fabricante
Anlisis de tamizado 98% mnimo pasa por ASTM D 1921
una malla 100 mesh (150 AWWA C213
m)
Vida til a 27 C 12 meses almacenado AWWA C213
en lugar seco o lo
indicado por el fabricante
Tiempo de gelificacin a 204 8 a 50 s o lo especificado ASTM D 4217
C (400 F) por el fabricante AWWA C213
Temperatura de aplicacin. 232 C 246 C (450 AWWA C213
F475F) o lo
especificado por el
fabricante.
Explosividad 102 g/m3 (6,6 x 103
lb/pie3) mxima
concentracin de resina
permitida en el ambiente
3.1.2 Requisitos del Adhesivo de Poliolefina Modificada (Segunda Capa en el
Sistema 3 Capas)
Color Polietileno Polipropileno
Especificado por Especificado por
el fabricante el fabricante
Contenido de humedad 0,1% mximo 0,1% mximo ASTM D
570
Gravedad Especfica 0,93 0,02 0,90 0,01 ASTM D
1505
ESPECIFICACION TECNICA DE MATERIALES PDVSA EM0101/16
Nota (1) El revestimiento debe ser reforzado si las condiciones del suelo
rocoso donde se enterrar la tubera as lo requiere.
ESPECIFICACION TECNICA DE MATERIALES PDVSA EM0101/16
5 MARCAJE
Cada lote de material suministrado para revestir la tubera, deber ser marcado
adecuadamente con la siguiente informacin:
Nombre del fabricante
Material
Nmero de lote
Fecha de fabricacin
Contenido Neto y Bruto
6 BASES DE COMPRA
6.1 Orden de Compra
En la orden de compra de la resina a ser fabricada conforme a esta especificacin,
se debe suministrar como mnimo la siguiente informacin:
ESPECIFICACION TECNICA DE MATERIALES PDVSA EM0101/16
7 BIBLIOGRAFIA
CAN/CSAZ245.20 Canadian Standard Association. External Fusion
Bond Epoxi Coated Steel Pipe.
CAN/CSAZ245.21 Canadian Standard Association. External Polyetilene
Coating for Pipe.
NFA497111 Three Layer External Coating Based on
Polypropylene Application by Extrusion.
DIN 30 670 Polyethylene Sheathing of Steel Tubes and of Steel
Shapes and Fittings.