0 évaluation0% ont trouvé ce document utile (0 vote)
2 vues1 page
The document outlines 3 tests required for ERCuSi-A filler wire: 1) A chemical analysis of the wire's composition to match the standard AWS A 5.7 table-1, testing for Cu, Ag, Zn, Mn, Fe, Si, P, Al, Pb and total other elements. 2) Measurement of the cast diameter between 320-1020mm. 3) Measurement of helix diameter below 25mm maximum.
The document outlines 3 tests required for ERCuSi-A filler wire: 1) A chemical analysis of the wire's composition to match the standard AWS A 5.7 table-1, testing for Cu, Ag, Zn, Mn, Fe, Si, P, Al, Pb and total other elements. 2) Measurement of the cast diameter between 320-1020mm. 3) Measurement of helix diameter below 25mm maximum.
The document outlines 3 tests required for ERCuSi-A filler wire: 1) A chemical analysis of the wire's composition to match the standard AWS A 5.7 table-1, testing for Cu, Ag, Zn, Mn, Fe, Si, P, Al, Pb and total other elements. 2) Measurement of the cast diameter between 320-1020mm. 3) Measurement of helix diameter below 25mm maximum.
SL No: TYPE OF TEST REQUIRED DESCRIPTION OF TEST NO OF SAMPLES WHERE TO DO
Need to perform a chemical
analysis of the filler wire. This should match with the chemical composition as mentioned in the standard AWS A 5.7 - table -1 . 1 CHEMICAL ANALYSIS 1 RSML Chemical analysis shall include Cu,Ag,Zn,Mn,Fe,Si,P,Al,Pb. And all other elements which are not included in this list shall be listed as "total other elements"
Cast diameter of the wire shall be
2 CAST DIAMETER 1 WELD MARKETING between 320 mm to 1020 mm Helix of weld wire shall be 25 mm 3 HELIX 1 WELD MARKETING Max