Académique Documents
Professionnel Documents
Culture Documents
0
%Documento realizado 30-oct-17
% \hspace para dar espacios horizontales en las lineas, para ubicar el texto con
precisin.
% \textbf texto en negrita
\fontsize{9pt}{9pt}\selectfont{
\section{ Introduccin}
\fontsize{9pt}{9pt} Este documento es una gu\'ia de formato o plantilla. Puede
obtenerse una copia de la p\'agina del curso, o incluso puede buscar por otras
versiones semejantes en internet. La idea de esta secci\'on, es dar una
introducci\'on al tema que se tratar\'a en el art\'iculo, de forma concisa y que
permita al lector prepararse para los contenidos siguientes.
\section{Desarrollo de Contenidos}
\fontsize{9pt}{9pt} A partir de esta secci\'on, se desarrollan los contenidos
del tema, de una forma ordenada y secuencial. N\'otese que la secci\'on debe ir
organizada usando t\'itulos como el anterior para cada tema nuevo incluido.
Aparte, se incluyen subt\'itulos como el siguiente.
\subsection*{A. Subttulos}
En esta secci\'on se especifican temas detallados que forman parte de un
t\'itulo principal, como el de "Desarrollo de Contenidos".
La hoja debe estar dividida en dos columnas, con un espacio de 4.22mm (0.17")
entre columnas.
\section{Estilo de Pgina}
Todos los p\'arrafos deben tener intentado o tabulaciones en la primera l\'inea.
Tambi\'en, todos los p\'arrafos deben estar alineados de forma justificada y
hacia la izquierda.
\begin{table}[H]
\caption{Tamaos de Fuentes para artculos}
\begin{tabular}[c]{|l|l|l|l|}
\hline
\multicolumn{1}{|c|}{\textbf{\multirow{1}{0.5cm}{ \multirow{1}{*}[3
mm]{Tam}}}}&\multicolumn{3}{c|}{\textbf{ \multirow{3}{*}[3 mm]{Apariencia (en
Time New Roman Times)}}} \\
\cline{2-4}
\multicolumn{1}{|c|}{\fontsize{8pt}{10pt}\selectfont{\textbf{\multirow{3}{*}[3
mm]{ao}}}} & \multirow{3}{*}[3 mm]{\textbf{Regular} }& \multirow{3}{*}[3
mm]{\textbf{Negrita}} & \multirow{3}{*}[3 mm]{\textbf{Cursiva}}\\
\hline
\fontsize{9pt}{10pt}\selectfont{\multirow{3}{*}[2.8 mm]{8}} &\multirow{2}{*}[1
mm]{Contenidos de tablas} &\multirow{2}{*}[1 mm]{\textbf{Negrita}
}&\multirow{1}{2.3cm}{\textsl{\multirow{2}{*}[1 mm]{Cursiva}}} \\
&\multirow{2}{*}[1.5 mm]{Ttulo de figuras}& & \\
&\multirow{2}{*}[2 mm]{Referencias a objetos}& & \\
\hline \fontsize{9pt}{10pt}\selectfont{\multirow{3}{*}[2.8 mm]{9}}
&\fontsize{9pt}{10pt}\selectfont{\multirow{2}{*}[1 mm]{Direcciones de}} &
\fontsize{9pt}{10pt}\selectfont{\textbf{\multirow{2}{*}[1 mm]{Negrita}}} &
\fontsize{9pt}{10pt}\selectfont{\textsl{\multirow{2}{*}[1 mm]{Cursiva}}} \\
& \multirow{2}{*}[1.5 mm]{\fontsize{9pt}{10pt}\selectfont{correo
electrnico}}&\multirow{2}{*}[1.5
mm]{\fontsize{9pt}{10pt}\selectfont{\textbf{Cuerpo del}}} & \\
& \multirow{2}{*}[2.2 mm]{\fontsize{9pt}{10pt}\selectfont{(usar fuente
Courier)}}& \multirow{2}{*}[2.2
mm]{\fontsize{9pt}{10pt}\selectfont{\textbf{abstract}}}& \\
& \multirow{2}{*}[2.2 mm]{\fontsize{9pt}{10pt}\selectfont{Cuerpo del
artculo}}& & \\
\hline
\fontsize{9pt}{10pt}\selectfont{\multirow{3}{*}[2.8 mm]{{10}}}
&\multirow{2}{*}[1 mm]{\fontsize{10pt}{10pt}\selectfont{Subttulos}} &
\fontsize{10pt}{10pt}\selectfont{\textbf{\multirow{2}{*}[1 mm]{Negrita}}} &
\fontsize{10pt}{10pt}\selectfont{\textsl{\multirow{2}{*}[1 mm]{Cursiva}}}\\
\hline
\fontsize{9pt}{10pt}\selectfont{\multirow{3}{*}[2.8 mm]{{11}}}
&\fontsize{11pt}{11pt}\selectfont{\multirow{2}{*}[1 mm]{Nombre del}}
&\fontsize{11pt}{11pt}\selectfont{\textbf{\multirow{2}{*}[0.8 mm]{Negrita}}} &
\fontsize{11pt}{11pt}\selectfont{\textsl{\multirow{2}{*}[0.8 mm]{Cursiva}}}\\
&\fontsize{11pt}{11pt}\selectfont{\multirow{3}{*}[3 mm]{autor}}& & \\
\hline
\fontsize{9pt}{10pt}\selectfont{\multirow{3}{*}[2.8 mm]{{24}}}
&\fontsize{8pt}{11pt}\selectfont{Ttulo del artculo} & & \\
\hline
\end{tabular}
\end{table}
Los detalles de los autores no deben mostrar ning\'un t\'itulo profesional como
PhD, MSc, Dr.
Para evitar confusiones, el apellido de cada autor debe ser escrito siempre.
Utilice colores s\'olidos que resalten sobre el fondo de la figura para mejorar
el contraste.
\begin{center}
\includegraphics[scale=0.4]{figura1.PNG} \\
\end{center}
\begin{scriptsize}
Fig. 1 El ejemplo de un gr\'afico con colores s\'olidos que resaltan sobre el
fondo blanco. \\
\end{scriptsize}\\
\begin{center}
\includegraphics[scale=0.50]{celu-mal.PNG} \\
\begin{scriptsize}
\fontsize{8pt}{8pt}\selectfont Fig. 2 Ejemplo de figura con baja resoluci\'on
\end{scriptsize}
\end{center}
\begin{center}
\includegraphics[scale=0.60]{celu-bien.PNG} \\
\fontsize{8pt}{8pt}\selectfont Fig 3.Ejemplo de figura con buena resoluci\'on
\end{center}
Las referencias se escriben usando fuente regular igual que el resto del
art\'iculo.
\section{Conclusiones}
El prop\'osito de esta secci\'on es resumir los principales resultados
discutidos a lo largo del paper. Recuerde manejar las conclusiones como
enunciados cortos fundamentados en la teor\'ia y los objetivos planteados.
\section*{Reconocimientos}
Esta secci\'on sigue el formato regular del resto del documento. La \'unica
observaci\'on es notar que el t\'itulo no est\'a numerado.
\begin{thebibliography}{12}
\bibitem{IEEEhowto:kopka} S.M. Metev and V.P. Veiko, \textit{Laser Assisted
Microtechnology}, 2nd ed., R.M. Osgood, Jr.,Ed. Berlin, Germany: Springer-
Verlag, 1998.
\bibitem{IEEEhowto:kopka} J. Breckling, Ed., \textit{The Analysis of Directional
Time Series: Applications to Wind Speed and Direction}, ser. Lecture Notes in
Statistics. Berlin, Germany: Springer, 1989, vol. 61.
\bibitem{IEEEhowto:kopka} S. Zhang, C. Zhu, J.K.O. Sin, and P.K.T. Mok, "{A
novel ultrathin elevated channel low-temperature poly-Si TFT}," \textit{IEEE
Electron Device Lett.,} vol. 20, pp. 569-571, Nov. 1999.
\bibitem{IEEEhowto:kopka} M. Wegmuller, J.P. von der Weid, P. Oberson, and N.
Gisin, "{High resolution fiber distributed measurements with coherent OFDR}," in
\textit{Proc. ECOC'00}, 2000, paper 11.3.4, p. 109
\bibitem{IEEEhowto:kopka} R.E. Sorace, V.S. Reinhardt, and S.A. Vaughn, "High-
speed digital-to-RF converter," U.S. Patent 5 668 842, Sept. 16, 1997.
\bibitem{IEEEhowto:kopka} (2002) The IEEE website. [Online]. Avalible:
http://www.ieee.org/
\bibitem{IEEEhowto:kopka} M. Shell. (2002) IEEEtran homepage on CTAN. [Online].
Avalible: http//www.ctan.org/tex-
archive/macros/latex/contrib/supported/IEEEtran/
\bibitem{IEEEhowto:kopka} \textit{FLEXChip Signal Processor (MC68175/D)},
Motorola, 1996.
\bibitem{IEEEhowto:kopka} "{PDCA12-70 data sheet}", Opto Speed SA, Mezzovico,
Switzerland.
\bibitem{IEEEhowto:kopka} A. Karnik, \textit{"Performance of TCP congestion
control whit rate feedback: TCP/ABR and rate adaptive TCP/IP,"} M. Eng. thesis,
Indian Institute of Science, Bangalore, India, Jan. 1999.
\bibitem{IEEEhowto:kopka} J. Padhye, V. Firoiu, and D. Towsley, "{A stochastic
model of TCP Reno congestion avoidance and control}", Univ. of Massachusetts,
Amherst, MA, CMPSCI Tech. Rep. 99-02, 1999.
\bibitem{IEEEhowto:kopka} \textit{Wireless LAN Medium Access Control (MAC) and
Physical Layer (PHY) Specification,} IEEE Std. 802.11, 1997.
\end{thebibliography}
}
\end{document}