Académique Documents
Professionnel Documents
Culture Documents
iPASOLINK 100E
iPASOLINK is a modular network element that integrates
a comprehensive set of TDM cross connect switching,
packet switching and microwave / optical features, Ultra Compact
resulting in reduced costs and a long investments All IP
lifetime. The following iPASOLINK series cover mobile Pay as you grow architecture
backhaul requirements all the way from the access tail
links through to the metro aggregation network. Natural Cooling
iPASOLINK 1000
12-way Nodal
Redundancy
4-way Nodal
14 Universal Slots up to 4-way radio
Redundancy
High Speed INTF Two Universal Slots
Four universal Slots
SDH and All IP Redundancy
Pay as you grow architecture
with CWDM Low cost Compact design
Transmission Specification
Frequency bands: 6 to 42 GHz
Radio Transmission Capabilities:
QPSK/16/32/64/128/256 QAM
Advanced Ethernet Functionalities Hitless-AMR
LDPC FEC
VLAN Port-based VLAN Transmission bandwidth 7, 14, 28 & 56 MHz
802.1Q Tag-based VLAN MTPC / ATPC
Q in Q (Tunnel) Interface :10/100/1000 Base-T
QoS 802.1p CoS / ToS /Diffserv,MPLS EXP 1000 Base-SX / LX
Advanced QoS (for AMR)
Synchronous Ethernet
Ethernet OAM IEE802.1ag, ITU-T Y1731 Scalability and Flexibility
Link OAM IEEE 802.3ah
RSTP (802.1w), MSTP Pay as you grow concept
Link Aggregation (LACP) - software upgrade up to 460 Mbps
Ether Ring Protection ITU-TG.8031, 8032V2 - In-Band DCN
Header Compression
2
iPASOLINK 100/200
Transmission Specification
Frequency bands: 6 to 42 GHz
Radio Transmission Capacities:
QPSK/16/32/64/128/256 QAM
Hitless-AMR
LDPC FEC
Transmission Bandwidth 7,14,28 & 56 MHz
MTPC / ATPC
. Any combination of SDH / PDH / LAN traffic
Interface :10/100/1000 Base-T
Advanced Ethernet Functionalities 1000 Base-SX / LX
16 x E1,
1xSTM-1(thru)or 1x Channelized
VLAN Port-based VLAN
802.1Q Tag-based VLAN
Q in Q (Tunnel) Scalability and Flexibility
QoS 802.1p CoS / ToS /Diffserv,MPLS EXP
Advanced QoS (for AMR)
Pay as you grow concept
- Synchronous Ethernet - software upgrade
- Ethernet OAM IEE802.1ag, ITU-T Y1731 Flexible configuration
- Link OAM IEEE 802.3ah - 1+0, 1+1 HS/SD/FD, XPIC(1+0)
- RSTP (802.1w), MSTP - Radio Aggregation (L2, L3)
- Link Aggregation (LACP) - 168xE1 Cross Connect SW
- Ether Ring Protection ITU-TG.8031, 8032V2 - PWE (SAToP)
- Header Compression (L2/L3) - Enhanced In-Band DCN
- TDM Ring Protection (SNCP)
- DHCP Relay/Sever Function
- In-Band DCN
iPasolink O&M Training PAGE 3
3
iPASOLINK 400 A
Transmission Specification
Frequency bands: 6 to 42 GHz
Radio Transmission Capacities:
QPSK/16/32/64/128/256/512/1024/2048 QAM
Hitless-AMR
LDPC FEC
Transmission Bandwidth 7/14/28/40/56MHz
MTPC / ATPC
. Any combination of SDH / PDH / LAN traffic
Advanced Ethernet Functionalities Interface :10/100/1000 Base-T
1000 Base-SX / LX
VLAN Port-based VLAN 16 x E1,
802.1Q Tag-based VLAN 2xSTM-1(thru)or 1x Channelized
802.1ad Provider Bridges
QoS 802.1p CoS / ToS /Diffserv
- MPLS EXP
Advanced QoS (for AMR) Scalability and Flexibility
- Synchronous Ethernet
- RSTP (802.1w), MSTP Pay as you grow concept
- ERP ITU-T G.8031, 8032V2 - software upgrade
- Ethernet OAM, IEE802.1ag, ITU-T Y1731 Flexible configuration
- Link OAM IEEE 802.3ah - Two on board modems
- Link Aggregation 802.3ad with LACP - Two Universal slots
- Header Compression (L2/L3) - 1+0, 1+1 HS/SD/FD,XPIC (1+0),APS
* Future - Radio Aggregation (L2, L3, L1)
- 168xE1 Cross Connect SW
- PWE (SAToP)
- TDM Ring protection (SNCP)
- In-Band DCN
iPasolink O&M Training PAGE 4
4
iPASOLINK 400
Transmission Specification
Frequency bands: 6 to 42 GHz
Radio Transmission Capacities:
QPSK/16/32/64/128/256/512/1024/2048 QAM
Hitless-AMR
LDPC FEC
Transmission Bandwidth 7/14/28/40/56MHz
MTPC / ATPC
. Any combination of SDH / PDH / LAN traffic
Interface :10/100/1000 Base-T
Advanced Ethernet Functionalities 1000 Base-SX / LX
16 x E1,
VLAN Port-based VLAN 2xSTM-1(thru)or 1x Channelized
802.1Q Tag-based VLAN
802.1ad Provider Bridges
QoS 802.1p CoS / ToS /Diffserv/ Scalability and Flexibility
- MPLS EXP
Advanced QoS (for AMR)
Synchronous Ethernet Pay as you grow concept
IEEE1588v2 (BC & slave) (Option Card) - software upgrade
RSTP (802.1w), MSTP Flexible configuration
ERP ITU-T G.8031, 8032V2 - 1+0, 1+1 HS/SD/FD,XPIC (1+0)/(1+1),APS
Ethernet OAM, IEE802.1ag, ITU-T Y1731 - Radio Aggregation (L2, L3, L1)
Link OAM IEEE802.3ah - 168xE1 Cross Connect SW
Link Aggregation 802.3ad with LACP - PWE (SAToP)
Header Compression (L2/L3) - Enhanced In-Band DCN
- DHCP Server/Relay Function
- TDM Ring Protection (SNCP)
- In-Band DCN
iPasolink O&M Training PAGE 5
5
iPASOLINK 1000
Transmission Specification
Frequency bands: 6 to 42 GHz
Radio Transmission Capacities:
QPSK/16/32/64/128/256/512 /1024/2048QAM
Hitless-AMR
LDPC FEC
transmission Bandwidth 7/14/28/40/56MHz
MTPC / ATPC
. Any combination of SDH / PDH / LAN traffic
Interface :10/100/1000 Base-T
1000 Base-SX / LX
Advanced Ethernet Functionalities 10GbE (High Speed Interface)*
16 x E1,
VLAN Port-based VLAN 2xSTM-1(thru)or 1x Channelized
802.1Q Tag-based VLAN
802.1ad Provider Bridges
QoS 802.1p CoS / ToS /Diffserv/ Scalability and Flexibility
- MPLS EXP Pay as you grow concept
Advanced QoS (for AMR) - software upgrade
- RSTP (802.1w), MSTP Flexible configuration
- ERP ITU-T G.8031, 8032V2 - 1+0, 1+1 HS/SD/FD,XPIC (1+0)/(1+1), APS
- Ethernet OAM, IEE802.1ag, ITU-T Y1731 - Radio Aggregation (L1,L2,L3)
- Link OAM IEEE802.3ah - 1512xE1 (10 STM-1) Cross Connect SW
- Link Aggregation 802.3ad with LACP - TDM Ring Protection (SNCP)
- Header Compression (L2, L3) - DHCP Server / Relay Function
- PWE (SAToP )
- CWDM
- In-Band DCN
iPasolink O&M Training PAGE 6
6
natural cooling
100E
100/200
1000
Traffic Offload/Concentration
Traffic offload allows the operator to unload their IP traffic, including emulated legacy traffic, onto other cost
effective IP network. The benefit of traffic offloading is twofold: > Differentiation of services to customers
> Reduction of OPEX by converging voice and data traffic
In contrast to offload, concentration creates an opportunity for wholesale operators and carriers to maximize the utilization of
their networks by converging services and traffic from various customers .
BTS/Node-B E1
Packet network
MS5000
: Dual Native
: All IP (Hybrid) : Hybrid Split : Off Load : CWDM
iPASOLINK can provide end to end Ethernet connectivity with the extension of reach and capacity, nodal packet
radio, aggregation and bandwidth management. It is possible to use it also for WIMAX network and fixed network.
Enterprise NW
Core
Network
100E link Back to Back
iPASOLINK Series
100E-200 link
Network
TDM Based
BSC/ RNC
Network
BS
Option-1 Option-2
TDM + IP based Backhaul ALL IP based Backhaul
Hybrid Radio
16xE1
16xE1
Migration
16xE1
Note: Network needs to be synchronized by sync ETH , etc. MSE: Multi Service Engine
TDM transmission
16xE1
16xE1
Hybrid Radio
16xE1
16xE1
Packet transmission
Migration Packet Radio
MSE MSE
64xE
16xE1
Note: Network needs to be synchronized by sync ETH , etc.
1
MSE: Multi Service Engine
16E1/MDR x 2 or
Channelized STM-1
16xE1
16xE1 FE or GbE
16xE1 32xE1
Ethernet
STM-1 STM-1
FE or GbE FE or GbE
STM-1 transparent
Ethernet
iPASO 200
iPASO 400
iPASO 1000
(In case of iPASOLINK200, no cable connection is required at the front panel for XPIC )
TDM Cross connect: max 168 x 168 E1 left and right hand routes
2 x STM-1 XC support
Support SNCP
Packet Switching: up to 40 Gbps
HYBRID SWITCHING FUNCTION-1000
1512 x 1512 E1 with support for 10 STM-1
Support SNCP
Packet Switching: up to 48 Gbps
Redundant Main card (TDM/L2 Switch matrix with CPU)
Note : The number of E1 channels depend on modulation scheme and TDM capacity
iPasolink O&M Training PAGE 23
FEATURES-5
COMPACT AND RELIABLE PLATFORM
Very compact and light platform for easy installation
1u IDU (100/200/400) 3U (1000)with GUI LCT for easy setting up
3/3.5 kg ODU
Backward compatible with Pasolink NEO series ODU
High reliability and quality backed by excellent field proven MTBF
Low Power consumption: adoption of high efficient RF components
VERSATILE RADIO SECTION
High modulation up to 256 QAM (100E) for Native Ether
High modulation up to 2048 QAM (400/400A/1000)for Native Ether and TDM
High system gain using LDPC FEC and Linearizer techniques
Adaptive modulation Radio (AMR)
cross polarization interference canceller. (XPIC) [not for 100 & 100E]
Double transmission capacity up to 920 mbps in 56 MHz BW
Enhanced system gain with new ODU (IHG)
FREQUENCY AGILITY AND EASY TUNING
Field tunable local oscillators (Synthesizer)
RF Point Frequency can be changed through Local Craft Terminal (LCT)
ODU Sub-band changeable by simply replacing the RF Filter.
iPasolink O&M Training PAGE 24
FEATURES-6
SYNCHRONIZATION
High Accuracy clock supply for clock synchronization
Support both native TDM and synchronous Ethernet for clock reference
400 IEEE 1588v2 with optional module (PTP-A) (BC and Slave)
Support external clock input / output [not for 100E]
PROTECTION SCHEMES
Ethernet OAM (IEE802.1ag / ITU-T Y.1731) and Link OAM IEEE 802.3ah
200Fault detection, fault localization/isolation,
400/1000Fault detection, fault localization/isolation, Performance measurement
Link OAM IEEE 802.3ah
6 38
42 GHz QPSK 256 QAM AMR AMR
Hitless (1+0)/(1+1)
(1+0) LDPC
6 42
38 GHz QPSK 256 QAM AMR AMR
Hitless (1+0)/(1+1) 2 way XPIC LDPC
VLAN Ether Ring TDM Ring LAG Ether OAM SYNC ETHER
VLAN Ether Ring TDM Ring LAG Ether OAM SYNC ETHER IEEE 1588v2
RADIO AGGREGATION
GbE(SFP) 10/100/1000Base-T 16- xE1 2 x STM1 Super PDH PWE RSTP / MSTP 10GbE
Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0 1+0
Redundancy Group SWGRP1 SWGRP2 SWGRP3 SWGRP4 SWGRP5 SWGRP6
(1+1)Hot standby No1 No2 No1 No2 No1 No2 No1 No2 No1 No2 No1 No2
(1+1)Twin Path No1 No2 No1 No2 No1 No2 No1 No2 No1 No2 No1 No2
XPIC GRP1 XPIC GRP2 XPIC GRP3 XPIC GRP4 XPIC GRP5 XPIC GRP6
(1+0) XPIC
Master Slave Master Slave Master Slave Master Slave Master Slave Master Slave
(1+1) XPIC GRP1 (1+1) XPIC GRP2 (1+1) XPIC GRP3
(1+1) XPIC
Master1 Master2 Slave1 Slave2 Master1 Master2 Slave1 Slave2 Master1 Master2 Slave1 Slave2
Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Modem
16E1-A
STM1-A
GbE-A
MSE-A
AUX-A
PTP-A
1 2 3 4
5 6 7 8
9 MC-M
10 MC-M
11 12 13 14
Term PS PS
* Slot 12 MSE card can be used with SW Key for more than 64E1 PWE.
And can be used after using slot11 MSE card (F/W 3.01.04)
iPASOLINK 1000
iPASOLINK 1000
Site-F
Site-C
2 way Nodal
Configurations
Site-A in one IDU
Site-B iPaso 200 iPASOLINK 200)
Site-D
iPaso 400
iPaso 400
iPaso 400
Site-E
iPaso 400
4 way Nodal Configurations in
one IDU (iPASOLINK 400)
2 x STM1
2 x STM-1
STM-1
All IP
MSE(PWE) card
16 x E1
PWE
E1 + Ether (Dual Native) GbE GbE
16 x E1 16 x E1
FE 16 x E1
152 E1
16 x E1 Super PDH 16 x E1
FE/GbE
16 x E1
NHG2
NEO IDU
79 E1
NHG2
NHG2
STM-1 (63E1)
STM-1 (63E1)
79 E1 + LAN
NHG2
NHG2
Ethernet Ring
TDM Ring
63 x E1 63 x E1 63 x E1 63 x E1
E1
63xE1(400)
Channelized STM-1
ERP Ether Ring Protection (200/400) 32xE1(200)
39
TDM Ring protection
- E1 SNCP
- Protection Switching Time
<50ms
E1
STM-1
STM-1
Mux
E1
E1
E1
E1
STM-1
STM-1
Mux
E1
E1
40
iPASOLINK 100E Block diagram
MODEM
CPU To ODU
Native
L2 SW
Packet line
LAN INTFC
Optional
Clock
-48V Power
Supply
MODEM
E1 INTFC DXC MODEM To ODU
16 x E1
(option)
Native
Channelized MUX/DEMUX Packet line
(option)
STM-1 / STM-1
(option)
Multi service L2 SW
Engine LAN INTFC
(option) Optional
Clock
Optional
ALM / AUX CPU
ALM/SC/CLK
Optional
-48V Power input Power
Supply FAN Module
options
TDM SW L2 SW CPU
Modem
Universal
Universal HSI
16 x E1 INTFC CWDM
slotslot
Universal
Universal #n-1#n
Universal slotHSI
4
2x STM-1
slotslot
#1 #2 slotHSI
3 10 GbE
MSE (64xE1 PWE) slot slotHSI
2
4 x GbE
slot #
Native TDM Bus
Native Packet Bus
FAN1
Control Bus
NMS/NE1
TERM-M
TDM SW L2 SW CPU 1xV.11/1xRS-232C
- 48V
PSPS
Optional
2xGbE Alarm
Clock - 48V
Main Board (SFP) DSC PSPS
Synchronous Ethernet Optional redundant
(Redundancy) 2xFE/GbE Clock
Power supply
FAN2
1xV.11/1xRS-232C
iPasolink O&M Training PAGE 44
iPASOLINK 200/400 Slots and Module configuration
No universal slot (All units are to be fixed before Shipment)
2 x Fast Ether OR 2 FE + 2 GbE OPTION CARDS
4x 10/100/1000Base-T Option
16 x E1 INTFC
ODU Interface LED Indication LCT / NMS LAN Ports
Ch STM-1 (or STM-1)
(1+0)/(1+1)/XPIC) (Status/Alarms) AUX HK DI/DO Multi Service Engine PS input
Universal Slot-Cards
Modem 4xGbE [2xRJ45, 2x(SFP)] Multi Service Engine 16 x E1 TDM INTFC
ODU Interface Channelized STM-1(or 2xSTM-1) AUX (HK Ext ALM) IEEE1588v2 PTP-A
Universal Slot-1 Universal Slot-2 Universal Slot-3 Universal Slot-4
GbE INTFC
FE1 / FE2 SFP
2xSTM-1 INTFC 16 x E1 INTFC
2 x GbE
Universal Slot-4
Main Card1
Main Card2
OW Jack
Protect SW
STM1-S
Top Cover to be removed for installation
STM-1 SFP
Optical S-1.1
1 2 5 6 POWER INDICATOR
Maintenance (Yellow)
Maintenance ON status Por1 (Green) Port 3(Green)
Alarm (Red)
Blink during reset, up / down LAN Link Status LAN Link Status
loading Alarm Status
Blink when data TX Blink when data TX