Académique Documents
Professionnel Documents
Culture Documents
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order in LTE
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
In case of inter-frequency or inter-RAT measurements, eNB needs to configure measurement
gaps/or DRX so UE can detect PCI to different frequencies as well.
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
PDCCH Order in LTE
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
In case of inter-frequency or inter-RAT measurements, eNB needs to configure measurement
gaps/or DRX so UE can detect PCI to different frequencies as well.
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
PDCCH Order in LTE
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
No OAM support is required.
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Slectionner une langue
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Slectionner une langue
Labels
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
In case of inter-frequency or inter-RAT measurements, eNB needs to configure measurement
gaps/or DRX so UE can detect PCI to different frequencies as well.
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
PDCCH Order in LTE
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
In case of inter-frequency or inter-RAT measurements, eNB needs to configure measurement
gaps/or DRX so UE can detect PCI to different frequencies as well.
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
PDCCH Order in LTE
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
No OAM support is required.
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Slectionner une langue
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Slectionner une langue
Labels
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Newer Post Older Post Home
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BS
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
Voice solutions in LTE
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
No OAM support is required.
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
Automatic Neighbor Relation (ANR) in LTE
TTI Bundling
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE based ANR
No OAM support is required.
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Create a Link
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
Automatic Neighbor Relation (ANR) in LTE
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Home
Quiz
Contact Info
Manually adding neighbor cells in network is indeed a very hectic process and prone to errors as well.
While networks are becoming more and more complex, it is required to find an automatic and a
more optimized way of adding neighbor cells.
ANR comes under the umbrella of Self Organizing Networks ( SON) features. ANR relies on UE to
detect unknown cells and report them to eNB. There are two major types:
i) UE based ANR
UE detects PCI of unknown cell when it needs to do measurement (as configured by network)
eNB retrieves the IP address from MME to further setup the x2 interface.
Every new eNB registers to OAM and download the table with information of PCI/ECGI/IP related
to neighbors
Neighbors also update their own table with new eNB information
Now like "UE based ANR", UE will detect unknown PCI and report it to the eNB
eNB doesn't request for ECGI and does not need support from MME
eNB setups x2 interface with the help of mapping table created in second step above
No comments:
Post a Comment
Recent Posts
Nokia 5G
Featured Post
PDCCH Order is a procedure to bring back uplink out-of-sync UE (user equipment) back to in-sync
state incase there is downlink data availab...
Followers
Blog Archive
2017 (1)
2016 (3)
2015 (7)
2014 (1)
2013 (5)
2012 (20)
December (1)
November (1)
October (4)
July (1)
June (7)
May (6)
TTI Bundling
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Translate
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
The views expressed in this blog are my own and in no way reflect the views of my employer. I hope
this sharing of knowledge will not only be beneficial to others, but a great learning experience for
myself too
Popular Posts
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
Labels
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
R (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1) Contention based
RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default bearer (2) Dongle
(1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling protocol (1) gtp (1)
harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3 (1) LTE (13) LTE
Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3) Nokia Networks
(2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2) PDCP (1) physical
channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter (1) quadrocopter
(1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11 (1) release 12 (1)
release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection Establishment (1)
rrc connection request (1) rrc connection setup (1) rrc connection setup complete (1) RRC states (3)
RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1) smartphone (1) SON
(2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1) throughput (2) Time division
(1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1) unlicensed (1) Video (1) voip (2)
volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
z (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery consumption (2) BSR (1) CA
(1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1) Contention based RACH (1)
Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default bearer (2) Dongle (1) DRX (1)
DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling protocol (1) gtp (1) harq (2) Http
digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3 (1) LTE (13) LTE Advanced (2) LTE
Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3) Nokia Networks (2) Over the Top
(1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2) PDCP (1) physical channel (1) policy
(1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter (1) quadrocopter (1) RACH (2)
Random access procedure (1) RaspberryPi (1) release 10 (1) release 11 (1) release 12 (1) release 13
(1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection Establishment (1) rrc
connection request (1) rrc connection setup (1) rrc connection setup complete (1) RRC states (3)
RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1) smartphone (1) SON
(2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1) throughput (2) Time division
(1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1) unlicensed (1) Video (1) voip (2)
volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.
3GPP (1) 5G (2) 5GHz (1) A-AMBR (1) AKA (1) Android (1) ANR (1) Authentication (1) Battery
consumption (2) BSR (1) CA (1) carrier aggregation (2) CC3D (1) cDRX (2) cell search (3) code rate (1)
Contention based RACH (1) Control Channels (2) CQI (1) CS FallBack (1) Dedicated bearer (2) Default
bearer (2) Dongle (1) DRX (1) DRX inactivity timer (1) eICIC (1) FDD LTE (2) GBR (1) gprs tunneling
protocol (1) gtp (1) harq (2) Http digest (1) ICIC (1) ims (3) interference (1) iSIM (1) Korea (1) Layer3
(1) LTE (13) LTE Advanced (2) LTE Capacity (1) LTE-U (1) MBR (1) measurements (1) MIB (1) Nokia (3)
Nokia Networks (2) Over the Top (1) paging DRX cycle (1) PCell (1) PCFICH (1) PCRF (1) PDCCH (2)
PDCP (1) physical channel (1) policy (1) Preamble (1) Pucch (1) PWM (1) QCI (1) QOS (2) Quadcopter
(1) quadrocopter (1) RACH (2) Random access procedure (1) RaspberryPi (1) release 10 (1) release 11
(1) release 12 (1) release 13 (1) release 8 (1) release 9 (1) RIL (1) RoHC (1) rollout (1) RRC Connection
Establishment (1) rrc connection request (1) rrc connection setup (1) rrc connection setup complete
(1) RRC states (3) RSRP (1) RSRQ (1) RSSI (1) SCell (1) Scheduling (1) SIB2 (1) signaling (1) SINR (1)
smartphone (1) SON (2) sps (1) synchronization (1) System Information blocks (2) TD-LTE (1)
throughput (2) Time division (1) transport block size (1) TTI bundling (1) UE-AMBR (1) UHF (1)
unlicensed (1) Video (1) voip (2) volga (1) VoLTE (5) wifi (1)
You may reproduce the content of this website only if you provide this website as original source.
Awesome Inc. theme. Powered by Blogger.