Académique Documents
Professionnel Documents
Culture Documents
Registration
1
1. Vendor Registration Process Steps:
Step 1: Vendors can register for one or more than one Product categories at a time, for
doing business with Adani Group. Vendor needs to provide the Vendor contact details
and business details.
Step 3: The Adani Group reviews the Registration Form and accepts/rejects the Vendor
or the Vendor may be contacted for further interactions & verification before finally
approving or rejecting.
Step 4: Approved Vendor shall be provided with a link on their registered email id with
the temporary user id and password. Vendor will login and create his/her login id.
Further details will get communicated from Adani IT Team to Approved Vendor later.
a) Vendor shall be required to fill up Self-Registration Form available at the Adani Group
Website i.e. http://www.adani.com by the following steps:
2
b) Vendor shall require to select the relative business site from the Adani
Group Portal.
3
d) After Clicking on link Vendor Registration, Vendor Registration form shall be opened
in new tab as shown:
e) This display screen is a Supplier Self Registration which is divided into 10 subsections:
Vendor shall be required to fill all the sections to complete the Vendor Registration
Process.
Important Note:-
Mandatory data is shown with asterisk mark (*) which must be
filled to complete the Process under each sub-section.
Vendor registration form once submitted by Vendor, changes
on the same will be available only if vendor gets approved by
Adani Group, Hence Vendors should fill the data very carefully.
4
Vendor Registration Form 1
Vendor will provide the required details as per below section if already
associate with the Adani.
5
Section-III: Organizational Details
6
Section-V: Withholding Tax Accounting Data
7
Section-VII: Contact Person Information
8
Category Sub-category
Discipline Sub-sub category Description
Description Description
Glass Wool
Ceramic Wool
Insulation GI Cladding
Aluminium Cladding
Mechanical Insulation
Insulation Tape
Clay Bricks
Refractories Fire Bricks
Other Refractory Materials
Centrifuge & Spares
Mechanical Seals
Centrifugal Impeller
Pump & Spares Sleeves
Other Pump Spares
Filters & Strainers
Mechanical Seals
Impeller
Vane Pump &
Sleeves
Spares
Other Pump Spares
Filters & Strainers
Mechanical Seals
Impeller
Mechanical Pumps & Spares Vaccum Pump
Sleeves
& Spares
Other Pump Spares
Filters & Strainers
Mechanical Seals
Impeller
Gear Pump &
Sleeves
Spares
Other Pump Spares
Filters & Strainers
Mechanical Seals
Impeller
Plate Type
Sleeves
Pump & Spares
Other Pump Spares
Filters & Strainers
Reciprocating
Compressor
Rotary
Compressor
Roots blower
Lobe Blower
Screw
Compressors and
Mechanical compressor
Spares
Centrifugal
Compressor
Dryer**
Refrigerated
Dryers**
Regenerative
desiccant
9
dryers**
Spares for
Compressors
MS Pipe
CS Pipe
CI Pipe
Metallic Pipe
High Alloy
Low Alloy
Mechanical Pipes SS Pipes
FRP Pipe
GRP Pipe
Non Metallic
Hume Pipe
Pipe
HDPE Pipe
PVC Pipe
Elbow
Tee
Metallic Bend
Fittings Flange
Cross
Union
Screen
Hydraulic
Hydraulic Cylinder
Machinery & Silencer
Components Spring
Couplings
Seals
Gears
Pulleys
Laboratory &
Scientific
Equipment &
Mechanical Accessories
Laboratory
Supplies &
Fixtures
Bolts
Granulators
Grinding Equipment
& Accessories
Heaters
Mechanical Hoppers & Feeders
Metal Cutting
Machinery &
Accessories
Nails
Nuts
Screws
14
Tubes & Tubing
Washers
Studs
HT Cable
LT Cable
Cables Control Cable
Electrical Electrical Wire &
Instrument Cable
and C&I Cables
Special Cable
Strainded Wire
Wires Single String Wire
Generator
Transformer
Reactor
Distribution
Transformer
Power
Transformer
(UAT & ST)
Control
Electrical Transformers
Transformer
and C&I and Spares
Buchholz Relay
WTI & OTI
Breather
Transformer
Transformer Accessories
Spares &
Accessories Rubber/Metallic Bellow
15
Automatic Voltage Regulation (AVR)
System
Generator Synchronizing System &
Spares
Other Generator Spares
Stator /Casing Components
HT switchgear
LT Switchgear
Switchgear & PCC & MCC
Electrical Circuit Relay and
and C&I Protection Control Panel
Devices Distribution
board and
panels
Fuses
Other Spares
PLC PLC Spares
Transmitters
Gauges
Field
Flow meters
Instruments
Analyser
Sensors
DCS DCS Spares
Instrument
Electrical SWAS
Equipment &
and C&I Boiler Tube Leak Detector
Accessories
Smoke Detection System
Weather Monitoring System
Conditioning
Monitoring
Continous Ambient air quality
monitoring system (CAAQMS)
Continous Emission Monitoring System
(CEMS)
IPBD
Electrical HT Bus Duct
Bus Duct SPBD
and C&I
LT Bus Duct NSPBD
Lighting
Electrical Illumination &
Fixtures &
and C&I Lighting
Accessories 16
Street Poles
Mast
GI
Perforated MI
Electrical Cable Tray & FRP
and C&I Hardware GI
MI
Ladder FRP
Adhesives &
Sealants
Warehousing
Equipment &
Supplies
Workshop
Machinery
Slings
Computer
Equipment &
Accessories
Software
Network
Equipment &
Accessories
Communication
Devices &
Accessories
IT/ Telecom Office Machines Printer &
& their Supplies Accessories
Audio & Visual
Equipment &
Accessories
Security
Surveillance
Photographic or
Video Equipment
& Accessories
Admin/Office Domestic Domestic 19
supplies Appliances Appliances
Kitchen
Equipment &
Utensils
Office Supplies &
Stationery
Clothing
Furniture &
Fixtures
Signage &
Accessories
Cleaning
Supplies
Agricultural
Horticulture Machinery &
Equipment
Fertilizers &
Plant Nutrients
Seeds
Fruits
Hardware &
Fittings
Medical
Medical Supplies Equipment &
Accessories
Wood Products
Cleaning
Equipment &
Accessories
Dispenser &
Accessories
Paper & Paper
Products
Promotional
Material
Sports & Fitness
Equipment &
Accessories
Safety &
HSE Protection
Equipment Equipment &
Accessories
Scrap Scrap & Waste
Dealers Materials
Tugs, Dredger,
Boat
Dreger
Boat
Gantry cranes
Mechanical (Rubber Tyred
gantry cranes)
Rail mounted
gantry cranes
Marine Equipment Mobile Harbour
& Accessories Crane
20
Container
Cranes (Rail
Mounted)
Ship Loader,
Ship Unloader,
Dredger spares,
Tug Spares,
Port crane
spares et
Fender, Bollard,
Ship to shore
link, Winches,
Marine Buoy,
Leading light
Bollard
Ship to shore
link
PSC SLEEPERS,DWG:RDSO/T-4148
PSC SLEEPERS,DWG:RDSO/T-4170 to
T-4173 CURVE
PSC SLEEPERS,DWG:RDSO/T-4183 to
T-4186 Slack Guage Sleepers
PSC SLEEPERS,DERAILING
SWITCH,RDSO:T-5836
PSC SLEEPER,60KG,RDSO DWG:T-
4218 TURNOUT SLEEPERS 1IN12
TURNOUT,1:8-1/2,CURVED F/60 KG
RAIL RDSO DRG: T-4865/4866/4867.
P-way Fittings (RH & LH)
21
TURNOUT,1:12,CURVED F/60 KG RAIL
RDSO DRG: T-4218. (RH & LH)
FISH PLATE,JUNCTION,DWG:RDSO/T-
696&T-699
PLATE,FISH,JOGGLED,RDSO DRG:T-5551/52
LINER,INSULATING,RDSO DRG:T-3708
LINER,RDSO DRG:T-3707
GLUED JOINT,52KG,DWG:RDSO/T-5361
BRACKET,CI,RDSO DWG:T-4784
DISTANCE BLOCK,T-4785
BOLT,RDSO DRG:T-11551
*C.I. BRACKET T-4917
*BOLT & NUT FOR CHECK RAIL DRG
NO T-11687
23
Section-IX: Note
Click on the check box and submit the Vendor Registration form. Once
registration form is submitted, vendor will receive an email on the
contact person email id containing the registration questionnaire form
2. Vendor need to provide the relevant and applicable information on
the same.
24
Vendor Registration Questionnaire Form 2
Vendor will receive the questionnaire form 2 link on his/her registered
contact person email id on successful submission of vendor registration
form 1. Vendor can fill up the form and save the same on time to time
basis before submitting it to Adani Group. Once questionnaire form 2
gets saved, vendor can open and fill the data as per his/her ease.
Adani Group will review these information and can return the
questionnaire form 2 to responsible vendor in order to provide the
missing/required data accordingly. Vendor will provide the
asked/required details in questionnaire form 2 and resubmit the form.
25
A) Manufacturer
1. Supplier Information*
Vendor shall be required to select the Manufacturer from the list. If vendor is
manufacturer as well as a service provider. Vendor shall be required to select the
status of Vendor as applicable and turn over details accordingly.
2. Manufacturing Capabilities
26
3. Equipment Details
Vendor shall be required to provide the details of Machineries used for the
manufacturing (As applicable).
27
5. Manufacturing Capacity for the item/equipment for which you want to register
6. Statutory Requirements
28
7. Service Capability
Vendor shall be required to provide the service capability details accordingly (As
applicable).
8. References/Credentials
29
9. Customer Support Details
30
11. Process Control
Vendor shall be required to provide the details of the control of the processes of
his/her organization (As applicable).
Vendor shall be required to provide the details for the control of non-conformance
issues (As applicable).
31
13. Calibration of measuring & testing equipments
Vendor shall be required to provide the system inspection and testing of finish
product and services details accordingly (As applicable).
32
15. System of recording, attending and monitoring customer complaint and corrective
action exits
Vendor shall be required to provide the relevant system details for recording,
attending and monitoring customer complaints and corrective action exits (As
applicable).
33
17. Are you complying - Statutory Compliance such as
Vendor shall be required to provide the statutory compliance data (As applicable).
34
19. Environment and Safety Certification
Vendor shall be required to provide the relevant data for environment and safety
Certification (As applicable).
Vendor shall be required to provide the relationship with Adani Employee (If
applicable).
35
21. Research & Development
Vendor can provide any other data apart from the above sets of information to the
Adani Group (If required).
36
23. Attachments List*
Vendor shall be required to provide the sets of attachment (As applicable). Below
are the list of attachment which is mandatory for the submission of questionnaire
form 2.
a) Copy of Pan Card
b) Copy of Cancelled Cheque
c) Balance Sheet
d) Copies of major order executed
24. Declaration*
Vendor shall be required to accept the declaration and to provide the Authorized
Signatory Name and his/her designation in the organization in order to submit the
form 2.
37
B) Authorized Dealer
Vendor (Authorized dealer) shall be required to fill up the below sets of data only. Please
refer the above for the instruction (For Manufacturer) to fill up these section as required.
1. Supplier Information*
2. Equipment Details
3. References/Credentials
7. Hazardous Chemicals
C) Trader
Vendor (Traders) shall be required to fill up the below sets of data only. Please refer the
above for the instruction (For Manufacturer) to fill up these section as required.
1. Supplier Information*
2. Reference/Credentials
3. Hazardous Chemicals
8. Other Information
9. Attachment List* a) Copy of Pan Card
D) Service Provider
Vendor (Service Providers) shall be required to fill up the below sets of data only. Please
refer the above for the instruction (For Manufacturer) to fill up these section as required.
1. Supplier Information*
2. Equipment Details
3. Statutory Requirements
4. Service Capability
5. References/Credentials
8. Control of non-Conformance
9. Calibration of measuring & testing equipments
10. System of recording, attending and monitoring customer complaint and corrective
action exits
11. Are you complying - Statutory Compliance such as
12. E-Business Readiness
13. Environment and Safety Certification
39
3. Adani Contact/Support for Vendor Registration:
40