Académique Documents
Professionnel Documents
Culture Documents
Assignment No 02
1. Analyze the following structural steel sections if they are subjected to tension, with dead
load of 120 kips and live load of 245 kips. Each member is made up of A36 steel. Assume
connected to gusset plate with single line of bolts on each leg, having three bolts
Spaced @ 3 c/c. The holes are punched for bolt diameters of 1/8. What is the
b. A W 12 x 35 section, connected with flanges. There are 4 bolts of size 1/8 in each
connected to plates of thickness on each flange. Sketch out the problem and
2. Design a built up section to form box shape, with dimensions of 12 x 12. The member is
subjected to tensile dead load of 45 kips and live load of 120 kips. Use A36 steel. Also,
design the tie plates. The choice may be angles or Channel shapes. For each connection,
assume the single line of bolts on either flange, total 4 bolts of 3/8 diameter, spaced @ 3