Académique Documents
Professionnel Documents
Culture Documents
Fittingsflangesspecs PDF
Fittingsflangesspecs PDF
WALL THICKNESS
NPS Pipe
O.D.
1
Light SCH SCH STD
2
SCH SCH
3
X-SIG SCH SCH SCH SCH SCH XX
A B K D V E F G NPS
Wall 20 30 40 60 80 100 120 140 160 Stg ASA MSS
1/2 .840 .083 --- --- .109 .109 --- .147 .147 --- --- --- .188 .294 1 1/ 2 5
/8 17/ 8 --- --- 1 3 2 13/ 8 1
/2
3/4 1.050 .083 --- --- .113 .113 --- .154 .154 --- --- --- .219 .308 1 1/ 8 7
/ 16 111/16 --- --- 11/ 2 3 2 111/16 33/4
1 1.315 .109 --- --- .133 .133 --- .179 .179 --- --- --- .250 .358 1 1/ 2 7
/8 23 /16 1 15/ 8 11/ 2 4 2 2 1
11/4 1.660 .109 --- --- .140 .140 --- .191 .191 --- --- --- .250 .382 1 7/ 8 1 23/ 4 11/ 4 21 /16 11/ 2 4 2 21/ 2 11/4
11/2 1.900 .109 --- --- .145 .145 --- .200 .200 --- --- --- .281 .400 2 1/ 4 11/8 31/ 4 11/ 2 27 /16 11/ 2 4 2 27/ 8 11/2
2 2.375 .109 --- --- .154 .154 --- .218 .218 --- --- --- .344 .436 3 13/8 43 /16 2 33 /16 11/ 2 6 21/2 35/ 8 2
21/2 2.875 .120 --- --- .203 .203 --- .276 .276 --- --- --- .375 .552 3 3/ 4 13/4 53 /16 21/ 2 315/16 11/ 2 6 21/2 41/ 8 21/2
3 3.500 .120 --- --- .216 .216 --- .300 .300 --- --- --- .438 .600 4 1/ 2 2 61/ 4 3 43/ 4 2 6 21/2 5 3
31/2 4.000 .120 --- --- .226 .226 --- .318 .318 --- --- --- --- .636 51/ 4 21/4 71/ 4 11/ 2 51/ 2 21/ 2 6 3 51/ 2 31/2
4 4.500 .120 --- --- .237 .237 --- .337 .337 --- .438 --- .531 .674 6 21/2 81/ 4 4 61/ 4 21/ 2 6 3 61 /16 4
5 5.563 .134 --- --- .258 .258 --- .375 .375 --- .500 --- .625 .750 7 1/ 2 31/8 105/16 5 73/ 4 3 8 3 75 /16 5
6 6.625 .134 --- --- .280 .280 --- .432 .432 --- .562 --- .719 .864 9 33/4 125/16 6 95 /16 31/ 2 8 3 1/2 81/ 2 6
8 8.625 .148 .250 .277 .322 .322 .406 .500 .500 .594 .719 .812 .906 .875 12 5 165/16 8 125/16 4 8 4 105/8 8
10 10.750 .165 .250 .307 .365 .365 .500 .500 .594 .719 .844 1.000 1.125 1.000 15 61/4 203/8 10 153/8 5 10 5 123/4 10
12 12.750 .180 .250 .330 .375 .406 .562 .500 .688 .844 1.000 1.125 1.312 1.000 18 71/2 243/8 12 183/8 6 10 6 15 12
14 14.000 .250 .312 .375 .375 .438 .594 .500 .750 .938 1.094 1.250 1.406 --- 21 83/4 28 14 21 61/ 2 12 --- 161/4 14
16 16.000 .250 .312 .375 .375 .500 .656 .500 .844 1.031 1.219 1.438 1.594 --- 24 10 32 16 24 7 12 --- 181/2 16
18 18.000 .250 .312 .438 .375 .562 .750 .500 .938 1.156 1.375 1.562 1.781 --- 27 111/4 36 18 27 8 12 --- 21 18
20 20.000 .250 .375 .500 .375 .594 .812 .500 1.031 1.281 1.500 1.750 1.969 --- 30 121/2 40 20 30 9 12 --- 23 20
24 24.000 .250 .375 .562 .375 .688 .969 .500 1.219 1.531 1.812 2.062 2.344 --- 36 15 48 24 36 101/2 12 --- 271/4 24
30 30.000 .312 .500 .625 .375 --- --- .500 --- --- --- --- --- --- 45 181/2 60 30 45 101/2 --- --- --- 30
36 1 36.000 .312 .500 .625 .375 .750 --- .500 --- --- --- --- --- --- 54 221/4 --- 36 54 101/2 --- --- --- 36 1
42 1 42.000 --- --- --- .375 --- --- .500 --- --- --- --- --- --- 63 26 --- 48 --- 12 --- --- --- 42 1
1 return to index
FORGED STEEL FLANGES
2 return to index
FITTINGS
WELDING FITTINGS
These fittings are made from wrought materials and manufactured in both
Seamless and Welded Construction.
SEAMLESS CONSTRUCTION
The tubing or pipe is heated to a temperature
at which the metal is workable and is forced over
a mandrel into its final shape. The rough fitting is
cooled and machined to apply bevels, then
cleaned and marked.
WELDED CONSTRUCTION
A plate is cut to size and formed in dies. The
two sides are welded together. X-Rayed on the
weld and then beveled. Fittings can also be
manufactured from welded pipe in the same
manner as seamless.
SPECIAL ORDER
4 return to index
FITTINGS
SCREWED FITTINGS
These fittings are made in sizes 1/8" through 4" and in pressure
ratings of 150 lb. (1000 lbs. WOG). 2000, 3000 and 6000 lbs.
The 150 lb. fitting is made in both cast and forged material.
The others are of forged material.
Flush
Bushing
Hex
Bushing
5 return to index
FITTINGS
These fittings can be made of carbon, alloy or stainless steel and in nickel
alloys in 150, 3000, 6000 and 9000 lb. ratings. The bore or waterway is
machined to conform with Schedule 40, 160 and DXH pipe. They are
available in the same shapes and sizes as Screwed Fittings including
reducing insert bushings. Special bores may be purchased by agreement.
6 return to index
FLANGES
The purpose of a flange is simply to join two pieces of pipe or connect valves or other similar items in a
piping system. It may be cast or forged.
FACINGS
One of the most important parts of the flange is the facing. Here are the most commonly used facings:
7 return to index
FLANGES
Usage: Used in lieu of welding necks when cost Usage: Usually NPS 4 - 300# & 600 + 150'
or space is a major consideration. up to NPS 24.
PRESSURE CLASSES
Generally flanges are manufactured in pressure
classes of 150, 300, 400, 600, 900, 1500 and
2500 lbs.
8 return to index