Académique Documents
Professionnel Documents
Culture Documents
com
BE SMART.
RUN SHARP.
SHARQEDGES Edges for graders and plows
PRODUCT CATALOGUE.
NEXT GEN.
NEW STEEL HARDER THAN EVER
www.olofsfors.com
SHARQ TABLE OF CONTENTS
EDGES FOR GRADERS AND SNOW PLOWS
SharqEdges
The Sharp Quick Mount Edge System 25
Benefits of the SharqEdges toolbox 67
SharqEdges Technique 89
Sharq FlexDesign 10
Customer Testimonials 11
PRODUCTS
Sharq P300 Original 1213
Sharq RAM 14
Sharq P300 HD 15
Sharq Flat 16
Sharq Viking 17
Curb Protector c/c 305 mm 18
HMS 3000 and Stingers 19
Mounting Accessories 20
Adapter Boards 21
INSTRUCTIONS
Wedge mounting instructions for moldboard 3/4 23
Wedge mounting instructions for moldboard 5/8 24
Bolt mounting instructions for moldboard 3/4 25
Bolt mounting instructions for moldboard 5/8 26
Mounting instructions 27
Mounting instructions 28
BRUXITE 2930
Sharq Startup 31
General Terms 31
SHARQ P300 HD
5/8 S.
SHARQ P300 THICKNES
HARDER
AND
TOUGHER.
NEXT
GENERATION HAS ARRIVED
Be even smarter and run even sharper. Now comes the next
generation of the unique and original Sharq system. Sharq
the universal edge system for all motor graders. Saves you
time and money in all conditions.
MULTIPLE
BE SMART. RUN SHARP. MOUNTING
OPTIONS
WEDGE OR
SHARQ RAM STANDARD
BOLT
DOUBLE
PUNCH
35% MORE
TO WEAR.
SHARQ FLAT
HARDER
AND .
TOUGHER
THE ULTIMATE AND
COMPLETE TOOLBOX.
+ CONVERT ANY GRADER.
+ EDGES FOR ALL CONDITIONS.
+ SAVES YOU TIME AND MONEY.
+ INCREASE SAFETY!
4 Olofsfors Sharq
2
REDUCED TIME AND COST
OF CHANGING EDGES.
CONSUMPTION
1
REDUCED FUEL
ION.
AND CO POLLUT
2
3
THE ULTIMATE
SOLUTION FOR ALL
5
ROAD CONDITIONS.
REDUCED WEAR ON THE
GRADER AND TIRES.
4 IMPROVED
ENVIRONM
OPERATOR
ENT.
www.sharqedges.com 5
Reduced downtime
Without Sharq
With Sharq
#2. REDUCED TIME AND
#1. REDUCED FUEL CONSUMPTION COST OF CHANGING EDGES.
AND CO2 POLLUTION. Because:
Because:
+ No need to take the grader
less down pressure
+ Thinner/sharper edges require back to the workshop for blade
the engine.
and hence less power from changes.
run the grader at
+ Grading the Sharq way lets you + Our quick mounting system
higher gears and less RPM requires only one person to
change edges on site.
+ Edges are light weight,
easy to transport and store
on the grader.
6 Olofsfors Sharq
With Sharq Without Sharq
With Sharq
Without Sharq
www.sharqedges.com 7
SHARQEDGES RUNNING THE SHARQ WAY:
55 55
70 55
8 Olofsfors Sharq
TECHNIQUE
5
LIFT BE CAREFUL
WITH THE DOWN
PRESSURE! CUT
EASILY AND SWITCH
TO A HIGHER GEAR!
60 65
CUT 5570
Low bending forces (F)
NOT
in the cutting edge.
PUSH!
Wedgebolt
REGAIN A STRAIGHT EDGE LINE BY MOVING THE EDGES AROUND, UP AND DOWN OR
EXCHANGE THEIR PLACES ON THE MOLD BOARD. THIS REMOUNTING IS DONE QUICKLY
ON SITE. MOUNT THE EDGE WITH A MAXIMUM 2 BELOW THE MOUNTING PLATE.
www.sharqedges.com 9
SHARQ FLEXDESIGN
5570
The Sharq system is designed to be flexible and give maxi-
mum efficiency. The edges are light weight, easy to handle
and can be mounted quickly.
With Sharq P300 and other double punched Sharq edges, it is easy to
recover a straight cutting edge on the mold board. With a 5 minute stop
on the road side you can solve the problem of a contoured edge line so
you can run again with a straight edge line. No need to go back to the
workshop to change blades. Saving time and fuel!
The Sharq FlexDesign makes road side edge changing quick and easy.
All Sharqdges can easliy be moved vertically, horizontally or flipped
around easily so edges on the mold board are in a straight line.
We call this unique solution the Sharq FlexDesign!
Maximum 2 inch.
5 steps
Rotate
Around
sition
Flip po
10 Olofsfors Sharq
CUSTOMER
TESTIMONIALS
DALE PATTERSON
J.D. Irving, Canada: Woodlands
(Sussex New Brunswick)
I could not imagine how it would work here because we
were wearing a 1grader blade on average in 5 days,
how would this thin blade last more than a few hours
but to my surprise we are averaging about 3 weeks on
a set of Shark Edges.
Fuel consumption has dropped drastically and so much
better for grading roads, from 24 lts/h on old blades to
16.247 lts/h on the Sharq Edges.
We are able to recover more gravel and the holes
allow some of the fines to stay on the road with the
P300, something we could never do with conventional
grader blades.
We could only grade about 6 kms a day with our old
blades compared to 10+ Kms with the Sharq Edges, plus
the Sharq Edges give us a safer road surface winter and
summer.
We are very satisfied with Olofsfors Sharq Edges, we
are now running on 3 graders , we would never go back
to the old way.
www.sharqedges.com 11
SHARQ P300 ON ICE
EXPERIENCE:
+ REDUCED SAND AND
SALT COSTS
+ INCREASED ROAD
FRICTION SAFER
ROAD SURFACE
SHARQ P300
THE KILLER
SHARK!
THE SHARQ P300 is unique. In hard conditions it outperforms any blade in cutting and flexibility. It cuts up compacted gravel, snow
and solid ice. Thanks to its unique patented design, it has a wide range of capabilities. Its thin, light, hard, tough and self-sharpening.
The pattern of the holes gives you sharp teeth through-out the full edge like no other serrated blade. The Sharq P300 also gives you
optimum steel usage and cost efficiency 75% of the steel can be used on grading with 100% performance all the way.
12 Olofsfors Sharq
SHARQEDGES PRODUCTS
SHARQ P300 ON GRAVEL
www.sharqedges.com 13
SHARQ RAM THE MONEY SAVER!
BENEFITS:
+ LONG LIFE HIGH
QUALITY STEEL
+ MAXIMUM STEEL USAGE
+ MAXIMUM FLEXIBILITY
SHARQ FLEXDESIGN
14 Olofsfors Sharq
SHARQEDGES PRODUCTS
SHARQ P300 HD
Note: The size of the vulcanised rubber part is: 85 x 25 (3 3/8 x 1) x length of the steel blade. The rubber is environment classified.
www.sharqedges.com 15
SHARQ FLAT
16 Olofsfors Sharq
SHARQEDGES PRODUCTS
SHARQ VIKING
BENEFITS:
+ HARDPAN PE
NETRATION
+ ICE AND PA
CKED
SNOW REM
OVAL
+ SMOOTHING
WASHBOARD
SURFACES
+ LOOSENING
HARD-PACKED
OR FROZEN
GRAVEL
www.sharqedges.com 17
CURB PROTECTOR C/C 305 MM
Requires wedgebolt 65
18 Olofsfors Sharq
HMS 3000 AND STINGERS
The HMS 3000 stinger board system operates with a big hit on a manhole, for instance the wedge bolts
a minimal contact area, allowing very low downward break to protect the grader and the solid stinger board
pressure on the edge. The HMS 3000 board comprises goes undamaged.
one solid piece with integrated support for maximum
Note: Both wedges 20,5 x 125 and 18,5 x 100 can
stability. The stinger bit holes are drilled with high preci-
be used. For severe duty 18,5 is recommended.
sion to ensure the stingers can rotate reliably and will
6 Stinger per foot (c/c 2) on stinger shaft 22,3 mm
wear evenly throughout their lifetime.
The HMS 3000 system protects the grader better and
is far stronger than stinger boards with individually
welded adapters for each stinger. If some stingers take
www.sharqedges.com 19
MOUNTING ACCESSORIES
WEDGEBOLTS
151-455980 20,5 long 125 4,9 0,09 0,20 50 pcs/pack, general service
151-455950 18,5 100 3,9 0,07 0,15 50 pcs/pack, severe duty up to 1213 mm
MOUNTING TOOLS
INFO KOMMER
BOLTS
Item Weight Weight
No. Designation kg lbs Note
NUTS
Item Weight Weight
No. Designation kg lbs Note
WASHERS
20 Olofsfors Sharq
SHARQEDGES PRODUCTS
ADAPTER BOARDS
www.sharqedges.com 21
INSTRUCTIONS
The Sharp Quick Mount Edge System
INSTRUCTIONS
WEDGE MOUNTING
INSTRUCTIONS FOR MOLDBOARD 3/4
Adapter plate
type
Wedge
Bolt FH M20 x 65
959-590730
Moldboard
Bolt FH M16 x 37 holes =
959-590300
Adapter plates
Length 58 feet Nut M6LM M20
959-590670
Wedgebolt 47
151-457500
Washer No 70,
straight 959-590250 Nut M6LM M16
959-590360
Length Adapter Wedgebolt Washer no Bolt FH Nut M16 Bolt FH Nut M20
plate Wedge 47 70 M16 x 37 locking M20x65 locking
5 feet 122-361130 5x 5x 5x 5x 5x 11 x 11 x
6 feet 122-361150 6x 6x 6x 6x 6x 13 x 13 x
7 feet 122-361090 7x 7x 7x 7x 7x 15 x 15 x
8 feet 122-361180 8x 8x 8x 8x 8x 17 x 17 x
www.sharqedges.com 23
WEDGE MOUNTING
INSTRUCTIONS FOR MOLDBOARD 5/8
Adapter plate
type 5/8
Wedge
Bolt FH M16 x 65
959-590310
Moldboard
Bolt FH M16 x 37 holes = 5/8
959-590300
Adapter plates
Length 58 feet
Nut M6LM M16
959-590360
Wedgebolt 47
151-457500
Washer No 70,
Nut M6LM M16
straight 959-590250
959-590360
Length Adapter Wedgebolt Washer no Bolt FH Nut M16 Bolt FH Nut M16
plate Wedge 47 70 M16 x 37 locking M16x65 locking
5 feet 122-361120 5x 5x 5x 5x 5x 11 x 11 x
6 feet 122-361140 6x 6x 6x 6x 6x 13 x 13 x
7 feet 122-361160 7x 7x 7x 7x 7x 15 x 15 x
8 feet 122-361170 8x 8x 8x 8x 8x 17 x 17 x
24 Olofsfors Sharq
INSTRUCTIONS
BOLT MOUNTING
INSTRUCTIONS FOR MOLDBOARD 3/4
Adapter plate
type
Bolt FH M16 x 45
959-590270
Bolt FH M20 x 65
959-590730
Moldboard
holes =
Adapter plates
Length 58 feet Nut M6LM M20
959-590670
Nut M6LM M16
959-590360
5 feet 122-361130 5x 5x 11 x 11 x
6 feet 122-361150 6x 6x 13 x 13 x
7 feet 122-361090 7x 7x 15 x 15 x
8 feet 122-361180 8x 8x 17 x 17 x
www.sharqedges.com 25
BOLT MOUNTING
INSTRUCTIONS FOR MOLDBOARD 5/8
Adapter plate
type 5/8
Bolt FH M16 x 45
959-590270
Bolt FH M16 x 65
959-590310
Moldboard
holes = 5/8
Adapter plates
Length 58 feet
Nut M6LM M16
959-590360
Nut M6LM M16
959-590360
5 feet 122-361120 5x 5x 11 x 11 x
6 feet 122-361140 6x 6x 13 x 13 x
7 feet 122-361160 7x 7x 15 x 15 x
8 feet 122-361170 8x 8x 17 x 17 x
26 Olofsfors Sharq
INSTRUCTIONS
MOUNTING INSTRUCTIONS
www.sharqedges.com 27
MOUNTING INSTRUCTIONS
28 Olofsfors Sharq
HARD WORK
HAS A NAME
Olofsfors produce Bruxite wear edges and bars in
a wide range for loader buckets, excavator buckets,
dozers and other construction and mining machinery.
Top punch
3/4 x 15
Center punch
3/4 x 15
30 Olofsfors Sharq
SHARQ STARTUP
Sharq P-300 Sharq RAM 16mm Sharq RAM 20mm Sharq P-300 HD
12ft: 122-454420=3st 12ft: 122-361951=3st 12ft: 122-361931=3st 12ft: 122-496444=3st
14ft: 122-454420=1st 14ft: 122-361951=1st 14ft: 122-361931=1st 14ft: 122-496444=1st
122-454430=2st 122-361961=2st 122-361941=2st 122-496454=2st
16ft: 122-454420=4st 16ft: 122-361951=4st 16ft: 122-361931=4st 16ft: 122-496444=4st
Number of parts needed for each adapter plate.
Length Adapter Wedgebolt Washer no Bolt FH Nut M16 Bolt FH Nut M16
plate Wedge 47 70 M16 x 37 locking M16x65 locking
5 feet 122-361120 5x 5x 5x 5x 5x 11 x 11 x
6 feet 122-361140 6x 6x 6x 6x 6x 13 x 13 x
7 feet 122-361160 7x 7x 7x 7x 7x 15 x 15 x
8 feet 122-361170 8x 8x 8x 8x 8x 17 x 17 x
GENERAL We reserve the right to make design changes at any time. This catalogue mainly contains our
standard range of products. Other products are available on request. We reserve the right to make
TERMS immediate corrections to any errors in the catalogue.
Okt 2013 V.1