Académique Documents
Professionnel Documents
Culture Documents
WORKBOOK
Detailed Explanations of
Try Yourself Questions
Electrical Engineering
Signals and Systems
1 Introduction
T1 : Solution
(a)
x(t ) + x(t )
As we know even part of any signal is
2
So if we use the above formulae we can determine that even part of x(t ) is represented as signal given in
option (a).
T2 : Solution
(b)
The signal x(t ) = u (t + 5) u (t 4)
x(t )
4 +5 t
6 3 3 1.5 1.5 3
www.madeeasypublications.org Copyright
Try yourself 3
T3 : Solution
(a)
The expression of x(t ) is x(t ) = (t 4k ) (t 4k 1).
k =
So x(t ) is a subtraction of two signals each periodic with period 4. So x(t ) is periodic with period 4.
T4 : Solution
t 2
Now, energy of signal will be Ex = [3e ] dt = 4.5
0
T5 : Solution
Copyright www.madeeasypublications.org
2 Fourier Series
T1 : Solution
(a)
Given that Fourier series coefficient of x(t ) is ak
F.S.
So, x(t )
ak
x(t ) + x (t )
Now, real part of x(t ) is
2
F.S.
and if x(t )
ak
F.S.
then ak
x (t )
x(t ) + x (t ) F.S. ak + ak
So real part of x(t ),
2 2
T2 : Solution
(c)
We know that Fourier series cannot be defined if the signal is non periodic. From the given options, signal
given in option (c) is non periodic. So answer is (c).
T3 : Solution
(d)
For real periodic signal the Fourier series coefficients (ck ) are conjugate symmetric (ck = c k ) which means
even magnitude and odd phase. So option (c).
www.madeeasypublications.org Copyright
Try yourself 5
T4 : Solution
(d)
t + To
The signal x(t ) is such that x(t ) = x , so the signal has half wave symmetry. So the signal will have
2
only odd harmonics, and since signal is even it will have only cosine terms.
T5 : Solution
2
2 2
Power of signals is Cn Cn
2
2
2
So power is = Cn = (2)2 + (8)2 + (8)2 + (2)2 = 136
2
Copyright www.madeeasypublications.org
3 Fourier Transform
T1 : Solution
(b)
The Fourier transform is X () = u () u ( 2), we know that
If signal is real then X () is conjugate symmetric.
If signal is imaginary then X () is conjugate anti-symmetric
The given X () is neither conjugate symmetric nor conjugate anti-symmetric.
So x(t ) is complex signal.
T2 : Solution
(d)
Given that x(t ) is real
x(t ) = 0 for t 0
1
Re [ X ()] e
j
and d = t e t
2
F.T.
We know that if x(t )
X()
x(t ) + x(t ) F.T. X () + X ( )
then Even [x(t )],
2 2
So Fourier transform of even part of x(t ) is real part of X (). So inverse Fourier transform of Re[X ()] will be
even part of x(t ).
x(t ) + x(t )
So, = t e t
2
and x(t ) = 0 for t < 0
So, x(t ) = 2te t u (t )
www.madeeasypublications.org Copyright
Try yourself 7
T3 : Solution
(a)
F.T. 1
We know that if e 2t u (t )
j + 2
F.T. 1
and e 2t u (t )
2 j
T4 : Solution
(a)
sint
Signal g (t ) = x(t ) cos2 t
t
Let Fourier transform of x(t ) is X ().
X () X ( 2) X ( + 2)
So Fourier transform of x(t ) cos2t will be + +
2 2 2
sint
Fourier transform of is rect(/2).
t
X () X ( 2) X ( + 2)
So G () will be + + rect ( / 2)
2 2 2
X ()
So G() =
2
1 1
So, H() = so, h(t ) = (t ).
2 2
T5 : Solution
(c)
1
Given Fourier transform of e t u (t ) is .
1 + j 2 f
1
Now Fourier transform of will be e f u (f ) using the duality theorem.
1 + j 2 t
Copyright www.madeeasypublications.org
8 Electrical Engineering Signals and Systems
T6 : Solution
(a)
2 + 21
Fourier transform is G () =
2 + 9
2 21 12
So, G() = + 2
2
= 1+ 2
+9 +9 +9
a t 2a
As we know that Fourier transform of e is
a 2 + 2
So g (t ) = (t ) + 2 exp ( 3 t )
T7 : Solution
(d)
Given that the signal is conjugate symmetric, that is x(t ) = x (t )
F.T.
Let x(t )
X()
F.T.
then x (t )
X ()
Since x(t ) = x (t ) X () = X ()
So X () is real.
T8 : Solution
(a)
F.T. 2a
Since e a t 2
a + 2
2a F.T. a
then (using duality) 2 e
a + t2
2
T9 : Solution
5sin(2t )
x(t ) =
2t
www.madeeasypublications.org Copyright
Try yourself 9
5
The Fourier transform of x(t ) will be rect ( / 4)
2
We need to find X ()dt
1 + j t
Since, x(t ) =
2 X ()e d
2 x(0) = X ()d
So, X ()d = 2 x(0) = 31.4
T10 : Solution
(c)
Properties of distortionless system are:
Magnitude should be constant w.r.t. frequency.
Phase should depend linearly on frequency.
Only function given in option (c) follow the given conditions.
T11 : Solution
(b)
Given h (t ) = cost u (t )
Then system will be causal, unstable and dynamic.
T12 : Solution
(a)
The signal x(t ) = (2 + e 3t ) u (t ) then final value i.e. x() will be 2.
T13 : Solution
(d)
Differentiation H (s ) = s = j
So magnitude vary linearly w.r.t. frequency and has constant phase.
Copyright www.madeeasypublications.org
4 Laplace Transform
T1 : Solution
(c)
To determine the Laplace transform of e 3t cos 2t , we know that
L.T. s
cos2t
s2 + 4
L.T. (s + 3)
e 3t cos2t
(s + 3)2 + 4
T2 : Solution
(a)
We know that
L.T. 1
u (t )
s
L.T. 1
e t u (t )
s +1
L.T. es
e (t + 1) u (t + 1)
(s + 1)
L.T. es + 1
e t u (t + 1) Re{s } > 1
(s + 1)
www.madeeasypublications.org Copyright
Try yourself 11
T3 : Solution
(a)
Given that Laplace transform of f (t ) is 2 then the signal is sinusoidal and we cannot find the value
s + 2
of signal at t = .
T4 : Solution
(b)
1
Given that H (s ) = 2
, then
s (s 2)
h(t ) = (t e 2t ) u (t )
T5 : Solution
(d)
Given that signal is right sided and system is causal and stable then poles of the system should be in left
hand side of the imaginary axis, so option (d) is correct.
T6 : Solution
(d)
k (s 2 + 20 )
Given, H (s ) =
s 2 + 0 s + 20
Q
So value of H (s ) at s is k
and value of H (s ) at s 0 is k.
So the filter is a band stop filter or notch filter.
Copyright www.madeeasypublications.org
5 Discrete Time System
T1 : Solution
1 t 1
To find the value of e t (2t 1)dt e t 2 dt
2
e 1/ 2
=
2
So, value of integral is 0.303.
T2 : Solution
(a)
Given that y (n ) = 3k x(n k ) and
K =0
We know that, y (n ) = h(k ) x(n k )
www.madeeasypublications.org Copyright
Try yourself 13
T3 : Solution
(a)
Given that
System
x1(n ) y1(n )
System
(n ) + (n 1) cos(n)
System
and x2(n ) y2(n )
System
(n 1) + (n 2) sin(n)
So impulse response can be found as follows:
Since x 1(n ) x 2(n ) = (n)
So impulse response will be y1(n ) y2(n )
So, h (n) = cos(n ) sin(n )
T4 : Solution
Given bandwidth (B) of the filter is 3 MHz, lower cut-off frequency is 2 MHz.
So upper cut-off frequency (fH ) will be 5 MHz.
2fH
The sampling frequency (fs ) is (where fH : upper cut-off frequency; k = integer part of f H /B )
k
fH 5
So, = = 1.66, So, k = 1.0
B 3
2fH
So, fs = = 10 MHz
k
Copyright www.madeeasypublications.org
6 Z-Transform
T1 : Solution
(b)
Let z -transform of x(n ) is X (z )
Z.T.
x(n )
So, X (z )
n
1 Z.T.
and x(n) X (2z )
2
n +1
1 Z.T. 1
Thus, x(n) X (2z )
2 2
T2 : Solution
(d)
Given that x(n ) is non zero only for finite values of n, thus ROC of X (z ) will be entire z-plane.
T3 : Solution
(d)
Given that x(n ) = 2n u (n ) 4n u (n 1)
So the ROC will be ( z > 2) ( z < 4)
Thus, ROC is 2 < z < 4.
T4 : Solution
(a)
18 2 4 12
Given that, X (z ) = 1 2 1
= 1
+ 1
+
(1 2z ) (1 + z ) (1 + z ) (1 2z ) (1 2z 1)2
= 2(1)n u (n ) + u (2)n u (n ) + 12n (2)n u (n )
www.madeeasypublications.org Copyright
Try yourself 15
T5 : Solution
(a)
Given that the system has h(n ) = 0 for n < 0 and system is not necessarily stable then H(z ) should have
degree of numerator less than degree of denominators.
Only (I) and (III) satisfy the required condition.
T6 : Solution
(d)
Given that x(n ) is right sided and real, X (z ) has two poles, two zeros at origin and one pole at e j/2, X (1) = 1.
Since x(n ) is real so poles of X (z ) should be in conjugate pairs so other pole will be at e j /2.
k z2 k z2
So, X (z ) = =
(z e j / 2 ) (z e j / 2 ) z 2 + 1
Since, X(1) = 1 so, k = 1
z2
So, X (z ) =
2
and z > 1
z +1
T7 : Solution
(a)
Signal is a nT u (n ) then the z-transform will be
1 z
=
T 1
1 a z z aT
T8 : Solution
(b)
n
1
Given x(n ) = u (n )
2
1
and y (n) y (n 1) = x(n )
3
1
So, Y (z ) Y (z ) z 1 = X (z )
3
X (z ) 1 2 3
Y (z ) = = = +
1 1 1 1 1
1 z 1 1 z 1 1 z 1 1 z 1 1 z 1
3 3 2 3 2
1 n 1
n
So, y (n ) = 3 u (n) 2 u (n)
2 3
Copyright www.madeeasypublications.org
7 Miscellaneous
T1 : Solution
(c)
k = DFT {[a b c d ] [a b c d ]}
= [1 3 5 8] [1 3 5 8]
= [1 9 25 64]
T2 : Solution
(a)
By the definition of DFT
N 1 2
j kn
X (K ) = x [n ]e N ;k = 0 to N 1
n=0
3 2
j kn
X (K ) = x [n]e 4
n=0
1 1 1
x[n] = , , , 0
3 3 3
1 1 j 2 k 1 j k
X (K ) = + e + e +0
3 3 3
1 1 1
X [0] = + + =1
3 3 3
1 1 j 2 1 j 1 j 1 j
X [1] = + e + e = + (1) =
3 3 3 3 3 3 3
1 1 j 1 j 2 1
X [2] = + e + e =
3 3 3 3
www.madeeasypublications.org Copyright
Try yourself 17
3
1 1 j 1 j 3 1 j 1 j
X [3] = + e 2 + e = + =
3 3 3 3 3 3 3
j 1 j
X [k] = 1, , ,
3 3 3
T3 : Solution
(b)
Number of complex multiplication is
N
= log2 N
2
1024
= log2 1024 = 5120
2
time = 5120 106 = 5.12 msec
T4 : Solution
(c)
j 2 kM
Time shifting property of DFT is given as x[n + M ]N = X (k ) e N , where N is the cycle period.
T5 : Solution
x[n] is real
X [k ] = X [N k ]
N= 8
a= X [2]
= X [8 2]
= X [6] = 2
T6 : Solution
(b)
Given x(n ) signal is real and 8-point DFT is {5, 1 3j, 0, 3 4j, 3 + 4j, , , }, we need to find ,
We know that when signal is real then DFT is conjugate symmetric X (k) = X (k ) and DFT will be periodic
with period 8, that is X (k) = X (8 k)
So = X (2) = 0
= X (1) = 1 + 3j
Copyright www.madeeasypublications.org