Académique Documents
Professionnel Documents
Culture Documents
TM
Distributed Architecture
Flexibility with Electronic Marshalling
The modern, scalable architecture changing project requirements
is based on the CHARMs Smart and the flexibility to implement
Logic Solver (CSLS) which safety functions easily, and safely
simplifies the design, installation, while eliminating re-work and re-
wiring and commissioning of any design associated with traditional
SIS project. This modularity gives marshalling.
you the capability to meet
Flexible Integration
Familiar, intuitive applications for greater availability
As a standalone safety system, The DeltaV SIS and DeltaV systems The integrated yet separate
DeltaV SIS can easily be are integrated noticeably in the architecture meets IEC 61508 and
integrated with control systems same engineering, maintenance, IEC 61511 requirements for
from other vendors using and operations environment. All physical separation and
interfaces that are based on open safety-related information is easily independence of safety and
communication standards, such accessible through familiar and control. DeltaV SIS delivers the
as Modbus, OPC and OPC.Net. intuitive applications. benefits of DeltaV integration and
separation without the tradeoffs
associated with the two extremes.
Page 2DeltaV SIS
Certified Function Blocks
Reduce engineering and complexity
The IEC 61508-certified SIS Out-of-the-box operator faceplates
function blocks deliver powerful automatically provide detailed
functionality out of the box, safety information with no
simplifying the implementation of configuration. Using these SIS
SIS applications. No custom code is function blocks can help
required to implement common eliminate engineering hours
SIS tasks. The result is faster required to implement emergency
configuration, troubleshooting shutdown (ESD) systems, fire and
and validation of SIS logic. gas systems (FGS), and burner
management systems (BMS).
incidents occur during these operations.
Duguid, I.M.
Chemical Engineering
The modern DeltaV SIS continually operator faceplates. The result is detect certain conditions, and the
monitors the health of the entire your SIS integrity level stays at a DeltaV SIS logic solver is
safety loop. It takes into account stable level longer, extending the configured to meet your safety
devices predicted lifespan and time between full proof tests. requirements to take your plant to
pre-empts end of lifecycle with a safe state, by manipulating the
maintenance notifications and The DeltaV SIS ensures high required final elements (valves,
testing that can be initiated reliability and availability through pumps).
automatically by the DeltaV SIS redundant architecture design,
logic solver, or manually from including redundant networks, The combination of sensor, logic
logic solvers and I/O. The system solver and final element form a
routinely monitors, controls and safety instrumented function (SIF).
collects safety-related data for Each SIF is designed to prevent a
ESD, FGS and BMS applications. specific hazard from occurring by
reducing a certain amount of risk.
Prevent incidents from This risk reduction equates to a
occurring safety integrity level (SIL). The
The DeltaV SIS has been widely DeltaV SIS modern system
used for emergency shutdown provides SIL 3 reliability in
applications to prevent hazardous compliance with IEC 61508 and IEC
Emergency situations from occurring, and can 61511 international standards,
Shutdown System initiate the shutdown of a plant, and in addition has many
unit, or piece of equipment should innovations: repeat confirmation
it be required. Sensors are used to built into the operator graphics,
failure-on-demand calculations,
easier compliance with IEC 61511
guidelines, higher safe failure improve overall availability.
fractions, less redundancy, less
George Cushon
proof-testing and longer intervals
OPTI Canada Inc.
between proof-tests.
The DeltaV SIS modern approach
to safety reduces risk to your
operations in multiple ways.
DeltaV SIS was best suited for our safety
Electronic marshalling provides
unprecedented flexibility to easily shutdown applications because of its
change or expand your safety
modularity, integration with the control
systemflexibility that lets you
separate engineering from logic
configuration. SIS CHARMs
systems and safety loop diagnostics.
connect to any I/O type. Steve Schmitz
Rohm and Haas
In addition to reducing your
installation, re-work and
commissioning costs, DeltaV SIS
electronic marshalling and
characterization module (CHARM)
technologies reduce your
equipment footprint. It eliminates
traditional marshalling cabinets
and gives you freedom to connect
existing loop wiring to a single
CHARMs terminal block or land
new or existing I/O to field
enclosures near your devices
either way, you free up
footprint for future expansion
or modification.
The modern DeltaV SIS is IEC 61508 certified for use in SIL 3 applications and provides
a comprehensive solution for your process safety system.
n Modern, smart SIS for optimized reliability with constant monitoring of safety status
and loop health
n Flexibility with CHARMs eliminates traditional marshalling
n Modular DeltaV SIS logic solver with configurable HART I/O
n Embedded digital field communications and integrated asset management
n Integrated operations environment with easy access to all safety and control information
n Intuitive function block engineering environment with integrated change management
n Automatic event reporting of safety information
Emerson Process Management The contents of this publication are presented for informational purposes only, and while every effort has been made to
1100 W. Louis Henna Blvd., Building One ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products
Round Rock, TX 78681-7430 or services described herein or their use or applicability. All sales are governed by our software licensing agreement and
terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or
www.DeltaVSIS.com specifications of our product and services at any time without notice.
2013 Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson
Electric Co.