Académique Documents
Professionnel Documents
Culture Documents
General Description
The TS431/431A/431B integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC
voltage references operate as a low temperature coefficient zener which is programmable from Vref to 36 volts with two
external resistors. These devices exhibit a wide operating current range of 1.0 to 100mA with a typical dynamic
impedance of 0.22. The characteristics of these references make them excellent replacements for zener diodes in many
applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5volt reference makes it convenient to
obtain a stable reference from 5.0volt logic supplies, and since The TS431/431A/431B operates as a shunt regulator, it
can be used as either a positive or negative stage reference.
This series is offered in 3-pin TO-92, SOT-89, SOT-23 and SOP-8 package.
Features Standard Application
Precision Reference Voltage
TS431 2.495V2%
TS431A 2.495V1%
TS431B 2.495V0.5%
o
Equivalent Full Range Temp. Coefficient: 50ppm/ C
Programmable Output Voltage up to 36V
Fast Turn-On Response
Sink Current Capability of 1.0 to 100 mA
Low Dynamic Output Impedance: 0.22
Low Output Noise Ordering Information
Electrical Characteristics
o
(Ta=25 C, unless otherwise specified.)
Parameter Symbo Test Conditions Min Typ Max Unit
Reference TS431 2.450 2.550
voltage TS431A Vref Vka =Vref, Ik=10mA (Figure 1) 2.475 2.495 2.525 V
TS431B 2.487 2.513
Note 4. Deviation of reference input voltage, VDEV, is defined as the maximum deviation of the reference over the full
temperature range.
The average temperature coefficient of the reference input voltage Vref is defined as:
Test Circuits
A
TO-92 DIMENSION
MILLIMETERS INCHES
DIM
MIN MAX MIN MAX
B
A 4.30 4.70 0.169 0.185
B 4.30 4.70 0.169 0.185
C 14.30(typ) 0.563(typ)
D 0.43 0.49 0.017 0.019
E 2.19 2.81 0.086 0.111
F 3.30 3.70 0.130 0.146
G 2.42 2.66 0.095 0.105
C E F
H 0.37 0.43 0.015 0.017
H
G
D
A SOT-89 DIMENSION
I MILLIMETERS INCHES
B DIM
MIN MAX MIN MAX
A 4.40 4.60 0.173 0.181
B 1.50 1.7 0.059 0.070
C 2.30 2.60 0.090 0.102
H C D 0.40 0.52 0.016 0.020
E 1.50 1.50 0.059 0.059
G
F 3.00 3.00 0.118 0.118
G 0.89 1.20 0.035 0.047
E D J H 4.05 4.25 0.159 0.167
I 1.4 1.6 0.055 0.068
F J 0.35 0.44 0.014 0.017
B
F
SOT-23 DIMENSION
MILLIMETERS INCHES
DIM
MIN MAX MIN MAX
A 2.88 2.91 0.113 0.115
B 0.39 0.42 0.015 0.017
E
C 1.78 2.03 0.070 0.080
D 0.51 0.61 0.020 0.024
E 1.59 1.66 0.063 0.065
F 1.04 1.08 0.041 0.043
G G 0.07 0.09 0.003 0.004
D C
A
SOP-8 DIMENSION
MILLIMETERS INCHES
DIM
MIN MAX MIN MAX
16 9 A 4.80 5.00 0.189 0.196
B P B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
1 8 D 0.35 0.49 0.014 0.019
F 0.40 1.25 0.016 0.049
G 1.27 (typ) 0.05 (typ)
G K 0.10 0.25 0.004 0.009
R
M M 0o 7o 0o 7o
C
P 5.80 6.20 0.229 0.244
F R 0.25 0.50 0.010 0.019
D
K
www.datasheetcatalog.com