Académique Documents
Professionnel Documents
Culture Documents
1 or 2
2. and thk. As defined in UCS-66(A) should not exceed
a. 1/2 in. (13 mm) for materials listed in Curve A of Figure UCS-66;
(-b) 1 in. (25 mm) for materials listed in Curve B,C, or D of Figure UCS-66.
(2) The completed vessel shall be hydrostatically tested per UG-99(b) or UG-99(c) or 27-4.
Alternatively,
the completed vessel may be pneumatically tested in accordance with 35-6.
(3) Design temperature is no warmer than 650F (345C) nor colder than 20F (29C). Occasional
operating
temperatures colder than 20F (29C) are acceptable when due to lower seasonal
atmospheric temperature.