Académique Documents
Professionnel Documents
Culture Documents
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com
AVEVA
PDMS Public Training Courses 2014
(Perth, Brisbane, Melbourne)
Course Description
PDMS Overview/Foundations
Basic Equipment Modelling
Basic Piping Modelling
Basic Structural Modelling
Day 1
By the end of Day 1 you will have an understanding of the AVEVA PDMS User Interface, Data structure and 3D
environment enabling you to navigate around the model and discipline specific menus.
Day 2
At the end of Day 2 you will have created and modified a number of 3D Equipment using standard forms and
menus through the use of AVEVAs powerful graphical model editor.
Day 3 and 4
Days 3 & 4 will focus on Pipework Modelling. You will gain an understanding and perform different methods of
routing pipes within the 3D environment by using tools such as plane move, defined distance and use of the
graphical model editor. You will create both flat and sloping lines. You will conduct data consistency checks to
ensure piping is correctly modelled and you will learn how to use the clash detection function to ensure your
models are clash free. Finally you will create isometrics from some of the modelled lines that you have built
throughout the 2 days.
Day 5
The last day of training will focus on Structural modelling. Here you will gain an understanding of how to model
individual section to a specific standard. You will learn how to manipulate existing sections whilst creating a
simple piperack including structural bracing.
Upon completion of this course you will receive an official AVEVA Training Certificate.
AVEVA
PDMS Public Training Courses 2014
(Perth, Brisbane, Melbourne)
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com
AVEVA
Everything3D Public Training Courses
2014
(Perth, Brisbane)
Course Description
Day 1
By the end of Day 1 you will have an understanding of the AVEVA Everything3D User Interface, Data structure
and 3D environment enabling you to navigate around the model and discipline specific menus.
Day 2
At the end of Day 2 you will have created and modified a number of 3D Equipment using standard forms and
menus as well as through the use of AVEVAs graphical model editor. In addition you will learn how to import
and export mechanical equipment to STEP AP203 format.
Day 3 and 4
Days 3 and 4 will focus on Pipework Modelling. You will gain an understanding and perform different methods of
routing pipes within the 3D environment through the use of the graphical model editor. You will create both flat
and sloping lines. You will conduct data consistency checks and design checks to ensure piping is correctly
modelled and you will learn how to use the clash detection function to ensure your models are clash free.
Finally you will create isometrics from some of the modelled lines you have built throughout the 2 days
Day 5
The last day of training will focus on Structural modelling. Here you will gain an understanding of how to model
individual section to a specific standard. You will learn how to manipulate existing sections whilst creating a
simple piperack including structural bracing.
Upon completion of this course you will receive an official AVEVA Training Certificate.
AVEVA
Everything3D Public Training Courses
2014
(Perth, Brisbane)
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com
AVEVA
Instrumentation Public Training Courses
2014
(Perth, Brisbane, Melbourne)
Course Description
Day 1
By the end of Day 1 you will have an understanding of the AVEVA Instrumentation user interface and the
product system and project architecture. You will learn to create and configure a new project in which you will
create area, instrument class and tag format definitions. You will create and manage instruments and loops,
create datasheet and produce standard reports.
Day 2
During day 2 you will learn to create and manage the various project catalogues and concepts of wiring rules to
increase productivity. You will also learn how to create equipment, associated cabling and carry out instrument
junction box and I/O allocation tasks.
Day 3
The final day of training will teach you how to use the instrument, equipment and cabling information created
during the previous two days to generate Loop, Termination and Hookup drawings.
Upon completion of this course you will receive an official AVEVA Training Certificate.
AVEVA
Instrumentation Public Training Courses
2014
(Perth, Brisbane, Melbourne)
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com
AVEVA
Electrical Public Training Courses 2014
(Perth, Brisbane, Melbourne)
Course Description
On completion of the course you will have an understanding of the AVEVA Electrical user interface and the product
architecture. You will learn to create and configure a new project in which you will create area, equipment class
and tag format definitions. You will create and manage loads and supplies for the distribution system and
associated cabling, utilise the powerful datasheet capabilities and produce standard reports.
Electrical Engineer
Electrical Wiring Manager
Electrical Designer
Day 1
By the end of Day 1 you will have an understanding of the AVEVA Electrical user interface and the product
system and project architecture. You will learn to create and configure a new project in which you will create
area, equipment class and tag format definitions. You will create and manage the distribution network for
equipment loads and supplies and the associated Key One Line diagrams.
Day 2
During day 2 you will learn to create and manage the various project catalogues and the concepts of wiring
rules. You will then create and size cables and complete the wiring and terminations. You will learn to define
and manage datasheets and create typical standard reports.
Day 3
The last day of training will teach you how to use the equipment and cabling information created during the
previous two days to generate Schematic, Termination, Key One Line and Installation drawings.
Upon completion of this course you will receive an official AVEVA Training Certificate.
AVEVA
Electrical Public Training Courses 2014
(Perth, Brisbane, Melbourne)
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com
AVEVA
Bocad Public Training Courses 2014
(Brisbane, Perth)
Course Description
Day 1
By the end of Day 1 you will have an understanding of the AVEVA Bocad User Interface, Creating and working
with Grids, Views and Points.
Day 2
At the end of Day 2 you will have created and modified a number of Structural elements as well as creating the
first deliverable which is a General Arrangement Drawing.
Day 3
On Day 3 you will learn the various options to edit members work with basic automatic connections as well as
inserting bolts welds and pop marks.
Day 4
During Day 4 you will work through an example project creating all hot rolled and cold rolled items along with
the relevant connections.
Day 5
The last day of training will focus on deliverables such as automatic assembly and shop drawings. You will also
create Marking plans and Bill Of materials.
Upon completion of this course you will receive an official AVEVA Training Certificate.
AVEVA
Bocad Public Training Courses 2014
(Brisbane, Perth)
Training Venue
Course descriptions and agendas should be used as a guide only and may be subject to change at any time without
notice. AVEVA reserves the right to make changes to these items and substitute material with that of a similar nature.
We recommend that you enquire within for the most up to date information.
Our courses are open to individuals with a background in engineering, both contractors and/or full-time employees.
Courses are conducted in our dedicated state of the art training facilities.
Demand dictates how frequently courses are run.
To optimize your learning potential, our maximum class size is eight students.
Please contact us for a complete course description.
Course fees are available on request and will be quoted ex GST
A deposit fee equivalent to 20% of the total course fees shall be payable upon registration.
Registrations are not confirmed until a completed registration form has been received by AVEVA and the deposit fee has
cleared in AVEVAs nominated bank account.
Cancellations must be communicated to AVEVA in writing. In the event of cancellation by a course participant, the
deposit fee paid will be forfeited and retained by AVEVA to cover the cancellation costs.
AVEVA reserves the right to cancel and/or re-schedule any course that does not meet the minimum class size of six. For
the avoidance of doubt, where the course is cancelled by AVEVA, any deposit fee paid will be refunded by way of cheque
within 3 weeks of the course cancellation notice.
Note: If you are a company that requires staff training, you can book one of our trainers for an onsite visit.
Contact
Kelly Fiala or Ani Lata
T: +61 (0)8 9214 3808
F: +61 (0)8 9481 3177
E: training.australasia@aveva.com