Chemical base 1-C silicone 1 Colour (CQP 001-1) Translucent, Black Cure mechanism Moisture-curing Cure type Acetoxy Density (uncured) (CQP 006-4) 1.0 kg/l approx. Application temperature 5 - 45C 2 Skin time (CQP 019-1) 10 min approx. Tack-free time2 20 min approx. 2 Curing time 24 hours approx. Shore A hardness (CQP 023-1 / ISO 868) 25 approx. 2 Tensile strength (CQP 036-1 / ISO 37) 1.0 N/mm approx. Elongation at break (CQP 036-1 / ISO 37) 600% approx. Service temperature -50 - 250C approx. Shelf life (storage below 25C) (CQP 016-1) 18 months 1) 2) CQP = Corporate Quality Procedure 23C / 50% r.h.
Description Product Benefits Areas of Application
Sikasil RTV Gasket is a premium, - Superior extreme temperature Sikasil RTV Gasket is designed to one-component, room temperature resistance (-50 - 250C) replace conventional cut gaskets vulcanising (RTV) silicone rubber - Excellent vibration, UV and (rubber, paper, cork and felt) used designed for flexible gasketing and weathering resistance for typical flanges and mechanical sealing applications. - Good gap-filling properties assemblies (oil pans, rocker Sikasil RTV Gasket forms a tough - Highly versatile covers, water pumps, gear boxes, but flexible seal of all shapes and - Easy to apply etc) in cars, trucks, boats, tractors, sizes and fills any surface voids. - Aquarium safe (translucent only) lawn mowers and related vehicles The cured product can withstand and equipment. vibration, weathering, temperature It can also be used for gasketing extremes, water, oil and grease and sealing in refrigerators, without hardening, shrinking or dishwashers, air conditioning units, cracking. oven doors and related appliances,
Sikasil RTV Gasket is especially where high temperature manufactured in accordance with resistance is required. ISO 9001 quality assurance This product is suitable for system. professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Sikasil RTV Gasket 1 / 2
Cure Mechanism Removal
Sikasil RTV Gasket cures by Uncured, excess Sikasil RTV Legal Notes reaction with atmospheric Gasket may be removed with The information, and, in particular, the
moisture. The reaction thus starts Sika Remover-208 or another recommendations relating to the appli- at the surface and proceeds to the suitable solvent. Once cured, the cation and end-use of Sika products, excess sealant can be trimmed are given in good faith based on Sika's core of the joint. The curing speed away from the edges with a knife. current knowledge and experience of depends on the relative humidity the products when properly stored, and the temperature. At low Hands and exposed skin should be handled and applied under normal
temperatures the water content of washed immediately using Sika conditions in accordance with Sika's the air is lower and the curing Handclean towels or a suitable recommendations. In practice, the reaction proceeds more slowly. industrial hand cleaner and water. differences in materials, substrates and Do not use solvents! actual site conditions are such that no warranty in respect of merchantability Application Limits Overpainting or of fitness for a particular purpose,
Sikasil RTV Gasket is not Sikasil RTV Gasket cannot be nor any liability arising out of any legal recommended for use in overpainted. relationship whatsoever, can be in- applications where it will be ferred either from this information, or permanently exposed to Further Information from any written recommendations, or temperatures exceeding 250C or from any other advice offered. The user Copies of the following publications of the product must test the products in contact with fuels (e.g. engine are available on request: head or exhaust manifold gaskets). suitability for the intended application - Safety Data Sheet and purpose. Sika reserves the right to The above information is offered change the properties of its products. for general guidance only. Advice The proprietary rights of third parties on specific applications will be Packaging Information must be observed. All orders are ac- given on request. Cartridge 300 g cepted subject to our current terms of Tube 75 g sale and delivery. Users must always Method of Application (as FIPG) refer to the most recent issue of the local Product Data Sheet for the pro- Surface preparation Value Bases duct concerned, copies of which will be Disassemble parts and remove all All technical data stated in this supplied on request. old gasket material from mating Product Data Sheet are based on surfaces before cleaning with a laboratory tests. Actual measured residue-free solvent and allowing data may vary due to circums- to dry properly. tances beyond our control. (If future disassembly is required, one surface should be wiped with Health and Safety Information oil.) For information and advice regarding transportation, handling, Application storage and disposal of chemical Cut the nozzle at a 45 angle to the products, users shall refer to the desired bead size (3 mm is actual Safety Data Sheets suitable for most applications) then containing physical, ecological, apply a continuous and even bead toxicological and other safety- to one surface, both along the related data. perimeter and around all bolt holes. Assemble parts before the sealant skins over and tighten bolts to required torque, where necessary leaving sufficient clearance for mechanical parts (bolts may be fully tightened once sealant has finished curing). For more information please contact the Technical Service Department of Sika Industry. Sikasil RTV Gasket 2 / 2