Académique Documents
Professionnel Documents
Culture Documents
To
The following annexure from part of our offer
We trust the above would meet your & end user requirement & should you require any further
Clarification, please feel to free to contact us.
Regards;
Annexure-1
Design Basis & Treatment Philosophy
The Sewage Treatment Plant is design to treat 5 m3/hr (100 m3/Day) feed flow rate.
The following design is considering for designing the Sewage treatment plant Inlet parameter
value as mention below.
The Proposed Sewage Treatment Plant will have the following steps of Treatment Process:-
Feed Pump
Screen For Grid & Sand Removal System
Flash Mixer
Flocculator
Rapid Settler
Filter Feed Tank
Filter Feed Pump
Active Media Filter
Final Treated Water Tank
Cyclone Feed Pump
Cyclone
Filter Press Feed Tank
Sludge Dewatering System (Filter Press)
D.Treated Water Outlet Parameter:-
The following design is considering for designing the Sewage treatment plant Outlet
parameter value as mention below.
3. Flash Mixer
Quantity :- 1 no
MOC :- MSRL
Make :- STT
Gear Box :- 0.7 KW
Make :- Elecon Or Equal
Motor :- CG Or Equal
4. Flocculator
Quantity :- 1 no
MOC :- MSRL
Make :- STT
Gear Box :- 1.5 KW
Make :- Elecon Or Equal
Motor :- CG Or Equal
5. Rapid Settler
Quantity :- 1 no
MOC :- MSRL
Make :- STT
Capacity :- 5 KL
6. Cyclone Feed Pump
Quantity :- 5m3/Hr.
MOC :- SS-316
Make :- Propellar/johnson Or Equal
Capacity :- 2.5 M3/hr
Motor :- CG/Kriloskar/siemens
Capacity :- 1 KWH /2900 RPM
Head :- 80 M
Model No :- 1.5 X 1.6
Mechanical Seal :- Single
Type :- Semi Open
Supply of Power connection for Sewage Treatment Plant Connected Load 10 KW,
Running Load is 5 KW.
Chemical Consumption:-
Note:-
1. Utility & Operation costs like chemicals,electrical power & Solid waste are calculated with
present water quality & quantity.
2. If quality or quantity may differ with same respect cost also will be change.