Académique Documents
Professionnel Documents
Culture Documents
FREE
20%
800+ Stores Nationwide • HarborFreight.com
OFF
B. PANCAKE MEASURE
ITEM 60637/61615 SAVE
95275 shown
56% 6
$ 99
VALUE
YOUR CHOICE
$3999 99 ANY
Customer Rating
SAVE
59%
$12 ITEM 69030/69031 shown
SINGLE
ITEM
• Air delivery:
0.6 CFM @ 90 PSI, 1 CFM @ 40 PSI
$ 56 99 Compare
$98.62 ITEM 63750/63181 shown
$ 1599 Compare
$29.97 LIMIT 1 - Cannot be used with other discount, coupon or prior purchase.
LIMIT 1 coupon per customer per day. Save 20% on any 1 item purchased. *Cannot be
used with other discount, coupon or any of the following items or brands: Inside Track Club
membership, Extended Service Plan, gift card, open box item, 3 day Parking Lot Sale item,
Coupon good at our stores, HarborFreight.com or by calling 800-423-2567. compressors, floor jacks, saw mills, storage cabinets, chests or carts, trailers, trenchers,
Offer good while supplies last. Shipping & Handling charges may apply if not welders, Admiral, Bauer, Cobra, CoverPro, Daytona, Earthquake, Hercules, Jupiter,
picked up in-store. Non-transferable. Original coupon must be presented. Lynxx, Poulan, Predator, StormCat, Tailgator, Viking, Vulcan, Zurich. Not valid on prior
Valid through 2/17/18. Limit one FREE GIFT coupon per customer per day. purchases. Non-transferable. Original coupon must be presented. Valid through 2/17/18.
LIMIT 3 - Coupon valid through 2/17/18* LIMIT 6 - Coupon valid through 2/17/18*
LIMIT 9 - Coupon valid through 2/17/18* LIMIT 3 - Coupon valid through 2/17/18* LIMIT 3 - Coupon valid through 2/17/18* LIMIT 4 - Coupon valid through 2/17/18*
LIMIT 4 - Coupon valid through 2/17/18* LIMIT 8 - Coupon valid through 2/17/18* LIMIT 4 - Coupon valid through 2/17/18* LIMIT 7 - Coupon valid through 2/17/18*
SUPER
SUPER COUPON SAVE SUPER COUPON COUPON SUPER
COUPON
Customer Rating
Customer Rating
60% AUTOMATIC
4-1/2" ANGLE GRINDER 1.51 CUBIC FT. BATTERY FLOAT 20 VOLT LITHIUM CORDLESS
SOLID STEEL CHARGER 1/2" COMPACT DRILL/DRIVER KIT
ELECTRONIC DIGITAL Customer Rating • 450 in. lbs. of torque
FLOOR SAFE • 1.5 amp hour battery
• Weighs 3.4 lbs.
SAVE
$9999 22-3/4"
87% SAVE
$5 999
Customer Rating
Cu
$75
Compare $175
ITEM 69645
60625 shown
$ 14
1 99 $24.98
Compare
ITEM 91006/62678/62977 shown ITEM 69955/69594/42292 shown 9
$ 99 Compare
$39.99
$ 6999 Compare
$99 ITEM 63531
LIMIT 9 - Coupon valid through 2/17/18* LIMIT 3 - Coupon valid through 2/17/18* LIMIT 8 - Coupon valid through 2/17/18* LIMIT 3 - Coupon valid through 2/17/18*
LIMIT 4 - Coupon valid through 2/17/18* LIMIT 7 - Coupon valid through 2/17/18* LIMIT 5 - Coupon valid through 2/17/18* LIMIT 8 - Coupon valid through 2/17/18*
At Harbor Freight Tools, the “Compare” or “comp at” price means that the same item or a similar functioning item was advertised for sale at
*Original coupon only. No use on prior purchases after 30 days from original purchase or without original receipt. Valid through 2/17/18. or above the “Compare” or “comp at” price by another retailer in the U.S. within the past 180 days. Prices advertised by others may vary by
location. No other meaning of “Compare” or "comp at" should be implied. For more information, go to HarborFreight.com or see store associate.
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 3
INCREDIBLY QUIET.
AMAZINGLY ACCURATE.
THE PRICE IS JUST,
WOW! @$299
MSRP
LOADED WITH FEATURES
HIGH VELOCITY + LONG, FLAT SHOT STRING
™
GAUNTLET
GAUNTLET .22
800
400
CHECK IT OUT NOW:
UmarexUSA.com/News
0
10
20
30
40
50
60
70
80
SHOT COUNT
STAY ON
TARGET
SUBSCRIBE TODAY
For More Information Visit
FIREARMSNEWS.COM
PAGE 4 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 5
ASSOCIATE PUBLISHER
Patrick Hogan PRESIDENT & CHIEF EXECUTIVE OFFICER
®
SUBSCRIPTION INQUIRIES
BE AWARE THAT FIREARMS NEWS ONLY ACCEPTS SUBSCRIPTION REQUESTS FROM AUTHORIZED AGENTS! WE subscription expires appears to the right of your name and address. Allow 6-8 weeks after renewing for the label to reflect
MAY NOT HONOR REQUESTS FROM UNAUTHORIZED AGENTS, AND YOU THEREFORE MAY LOSE YOUR MONEY IF your new expiration date.
YOU BUY FROM AN UNAUTHORIZED AGENT. If you are offered a subscription to FIREARMS NEWS, please call 1-800- FIREARMS NEWS is an ad-driven publication featuring thousands of suppliers and products in each issue for your
345-6923 to determine if the agent is authorized. For more information on subscription scams, please visit www.ftc.gov. enjoyment. Consequently, FIREARMS NEWS is classified as a Standard Class publication by the U.S. Postal service. At
To change your address: Call our toll-free customer service number or E-mail us with your new address 6 to 8 times, there are delays with Standard Class mail, especially around tax time and Christmas. If your copy of FIREARMS
weeks before your move. If you receive a bill after you’ve paid: Our letters probably crossed in the mail. Please NEWS is arriving consistently late, call (800) ASK-USPS and make a complaint. Canadian Publications Mail Sales Agree-
disregard any bill or renewal notice you receive soon after mailing your payment or order. (If you continue to receive ment No. 41405030. Return undeliverable Canadian addresses to 500 Rt 46 East, Clifton, NJ 07011.
notices, please let us know.) Occasionally, our subscriber list is made available to reputable firms offering goods and services that we believe would be
If your issue is damaged or missing: Call our toll-free number or E-mail us. We’ll replace the issue or extend your of interest to our readers. If you prefer to be excluded, please send your current address label and a note requesting to be
subscription, whichever you prefer. Remember, FIREARMS NEWS is published 30 times a year. excluded from these promotions to: Outdoor Sportsman Group – 1040 6th Ave, 12th Floor, New York, NY 10018-3703 Attn:
Privacy Coordinator, or email your label information and note to privacycoordinator@outdoorsg.com
To know when your subscription expires: Check the printed address label on the magazine cover. The date your
l l
#JNE01122K09 1#569856 1UP84
e All Rights Reserved. No part of this book may be reproduced without is solely at your own risk, and the authors and Publisher disclaim
sa mp
!803216136!
DEC 00 1-800-345-6923 written permission.
® is a registered trademark of Outdoor Sportsman
any and all liability relating thereto. Any prices given in this issue
were suggested prices at the press time and are subject to change.
JOHN DOE
1234 MAIN STREET
Outside U.S.; call 386-447-6318 Group® in the United States. Some advertisements in this magazine may concern products that
The Publisher and authors make no representations or warranties re- are not legally for sale to California residents or residents in other
ANYTOWN US 12345-6789 E-mail: sgncustserv@cdsfulfillment.com garding the accuracy, completeness or timeliness of the information jurisdictions.
PAGE 6 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
IS A LOOPHOLE
CAR ATTACK GENERATES CALLS FOR GUN CONTROL.
(For a list of available categories - Go to: www.firearmsnews.com/classifieds)
PRINT ONE WORD PER SPACE — TWO WORDS FREE
!
in the past. California enacted laws right up to the minimal barrier
against open carry after the Black surrounding the park where the rally
Panther Party staged an armed march was to be held. Rally attendees were
Please use additional sheet of paper for larger ads.
on the state capitol. Again, no one forced to run a gauntlet of protesters
was shot, but the group’s decision in order to get into the park, and MAIL COMPLETED FORM TO:
to legally display their arms served
as the justification for passage of
police did little to protect them from
protesters, or protesters from them,
FREE Firearms News, Dept. CL, 2 News Plaza, 3rd Floor, Peoria, IL 61614
carry prohibitions in California and as they made their way to the rally. OR EMAIL AD AND ALL INFORMATION BELOW TO:
elsewhere, and contributed to passage As violence began to break out before FirearmsNews@outdoorsg.com
of the federal Gun Control Act of the rally, police retreated, ostensibly
1968. to don riot gear (which they curiously
It’s worth noting that among the weren’t already wearing), leaving the
most outspoken proponents of these warring factions to do battle. Then, on
CLASSIFIED AD RATES
restrictions on rights are the very orders from the governor, the legally
people who bear the most responsibility permitted rally, which hadn’t officially _______ X 8pt plain @ 40¢ = ___________
for the events in Charlottesville going started yet, was declared an “unlawful
so terribly wrong: Virginia Governor assembly,” and the police in their riot
_______ X 8pt bold @ 80¢ = ___________
Terry McAuliffe, and Charlottesville gear marched out, not to push back _______ X 10pt bold @ $1.00 = ___________
Mayor Mike Signer. the protesters who were assaulting the
The First Amendment can be a very legally permitted rally, but to push the _______ X 10pt bold caps @ $1.60 = ___________
uncomfortable thing. The core of the rally attendees out of the park, into the _______ X 12pt bold @ $1.80 = ___________
right to free speech—especially political streets full of protesters.
speech—boils down to the statement Who could have guessed that this _______ X 12pt bold caps @ $2.20 = ___________
that used to appear at the top of many wouldn’t end well? X ___________ # of issue(s)
newspaper editorial pages: “I disapprove When the alleged white supremacist
of what you say, but I will defend to the ran a car into a crowd, the media START DATE: _____________ $__________ Total Due
death your right to say it.” The concept and politicians blamed everyone to
is simple at the theoretical level, but the right of “far-left,” and called for Continue running until notified & charge credit card monthly. MINIMUM: $4.00
gets complicated in the real world. sweeping new gun control.
People opposed to certain speech, When a Black Lives Matter
whether it be burning a U.S. flag, or supporter assassinated five police PLEASE INCLUDE FULL ADDRESS & PHONE NUMBER FOR OUR RECORDS
spouting racist views, like to point officers in Dallas, the media and
out that the First Amendment only politicians insisted that his actions NAME ______________________________________________________________________
applies to government, and does not shouldn’t reflect on the group
require individuals to tolerate “hateful” as a whole, regardless of their ADDRESS ____________________________________________________________________
speech. That’s true, but the government inflammatory rhetoric, which often
has an obligation to not only “allow” calls for the killing of police officers,
CITY___________________________________________ STATE __________ ZIP__________
free speech, but to protect it as well. and they called for new gun control. DAYTIME PHONE___________________________________
No one has the right to use force to There’s no double-standard or
squelch free speech, particularly in a agenda at play though. That’s just
public space, and the government has crazy talk. METHOD OF PAYMENT (payment due with ad placement)
a sacred obligation to guard that right, — Check/Money Order Enclosed MasterCard VISA Discover American Express
regardless of how repugnant or hurtful
©2017 The Firearms Coalition, all rights
that speech may be. reserved. Reprinting, posting, and distributing
CARD # ______________________________________________ Exp. Date ________________
In the case of the “Unite the Right” permitted with inclusion of this copyright
rally in Charlottesville, the government statement. www.FirearmsCoalition.
SIGNATURE___________________________________________________________________
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 7
A H O V
AMG International Armory Harbor Freight Tools Outdoor Sportsman Group Valley Ordnance Works, LLC
.................................... 62 ...................................... 2 .......................... 4, 66, 67 .................................... 55
AR15mold.com .................. 63 Hunter’s Lodge Corp
Armory Parts Exchange .................................... 37
(APEX) .......................... 56 R W
Rapid Fire Triggers, Inc. William’s Trigger Specialties
I .............................. 58, 62 .................................... 61
B Inner City & Travel Survival Co. Ruben Mendiola, Jr.
Black Hills Ammunition, Inc. .................................... 57 .............................. 59, 61
.................................... 65
Blue Ridge Knives
.................................... 62 J S
Bob Hayley ........................ 58 J&D Components S&K Scope Mounts
Bob’s Gun Shop .................................... 57 .................................... 56 FIREARMS NEWS
.................................... 58 J&G Sales, LTD Sarco, Inc. EDITORIAL
Bravo Company USA .............................. 27-33 .............................. 42-54
.........................34-36, 59 Sarge’s Military Surplus The Pistol-Caliber
.................................... 57 Carbines and the CMMG
K Saxet Trade Shows Guard............................. 8
C Knox .................................... 6 .................................... 64 James Grant
Charley’s Surplus Sales
.............................. 40, 41 Meet the New Boss! S&W
Crosscut Saw Co................ 62 L T Improves the Improved—
L&S Supply Tannerite Sports, LLC The M&P 2.0!............... 14
.................................... 61 .................................... 56 James Tarr
D Lauer Custom Weaponry Tech SIGHTS
Davidson’s ......................... 68 .................................... 13 .................................... 62 Spanish Ruby Pistols:
Desperate Times Call for
Desperate Measures!
E M U ..................................... 18
Evenheat Kiln Co................ 61 M&A Parts UltiMAK Paul Scarlata
.............................. 38, 39 ...................................... 3
Mid-Hudson Promotions, Inc. Umarex USA The Suppressor-Ready
G .................................... 64 ...................................... 3 CZ 527! ........................ 22
Gentry Custom, LLC Murray Gunsmithing Usmachinegun.com David M. Fortier
.................................... 55 .................................... 57 .................................... 58
PAGE 8 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
THE PISTOL-
CARBINES
CALIBER
AND THE By James Grant
Cover and lead photo by Michael Anschuetz
CMMG GUARD
The CMMG is a great choice for those contemplating a pistol-caliber carbine!
S
ubmachine guns are incredibly potent firearms Interestingly, some designs followed the exact op-
in close quarters and in the hands of a skilled posite path, like the Beretta CX4. Instead of evolving
operator. They have fallen out of favor with from a submachine gun, the CX4 began as a semi-
modern militaries for two major reasons: their limited auto pistol-caliber carbine, before being developed
effective range, and the rise of the short-barreled as a select-fire weapon for the government of India
assault rifle. as the Mx4 SMG—with more than 36,000 examples
These fully automatic or select-fire pistol-caliber manufactured for that contract alone.
firearms offer the individual soldier increased fire- The reason the idea of a pistol-caliber carbine has
power over a sidearm, with better maneuverability survived as long as it has is because the concept
than a full-sized rifle in close combat. of a compact, light-weight, soft-shooting, shoul-
Many firearm manufacturers have capitalized on der-fired firearm are desirable features. In addition,
the strengths of these designs, offering civilian-legal, reduced ammunition costs, the ability to shoot in
semi-automatic sub-guns in the form of pistol caliber indoor pistol ranges, the reduced muzzle blast,
carbines. This idea is not new—Auto Ordnance devel- better performance with sound suppressors,
oped semi-auto versions of its (in)famous Thompson increased range over pistols, precision shooting
SMGs in the 1970s. over shotguns loaded with shot ammunition, and the
A decade later, H&K engineered an ATF-approved fact that in many cases uses the same magazine as
semi-auto version of the MP-5, and RPB Industries an individual’s sidearm, still holds merit for both
developed the M-10 and M-11 open-bolt versions of civilian, and law enforcement users. The perfect
the MAC-10 and MAC-11 sub-guns. While most of pistol-caliber carbine should enhance the aforemen-
these pistol-caliber carbines were based on famous tioned traits, not hinder them. However, the down-
SMGs like IMI’s UZI carbine, semi-auto-only variants side to pistol-caliber carbines is that they lack the
of lesser-known SMGs like the S&W M-76 (the MK- stopping power and long range shooting of their rifle
760) also surfaced on the civilian market. counterparts.
PAGE 10 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
Despite this, many companies producing new pistol- sets of lugs attempting to scissor past each other slows ing lips and a high-impact polymer body, these light-
caliber carbines tend to play it safe and simply build the bolt’s rotation. Until the bolt rotates, it can’t break weight mags are available in 10-, 13-, and 23-round va-
direct-blowback firearms. There are outliers, like the free from the chamber, and thus, the carrier can’t move rieties. The Guard ships with a single, 13-round Glock
KRISS and SIG MPX, but for the most part, if a new de- rearward to complete the cycle. OEM magazine, but additional magazines can be found
sign is chambered in a pistol caliber, it’s direct-blowback When manually charging the action, the two slide apart with little effort.
operated. without much effort. But under the enormous pressure of I reached out to CMMG staff to ask why they didn’t
While very reliable, the problem with direct blowback is a round detonating inside the chamber, the friction is too include higher-capacity magazines with the Guard, and
twofold: it needlessly increases both overall weight, and felt great for the action to open. Once internal pressure drops they responded that the rifle wasn’t always 100% reliable
recoil. Additionally, the only things keeping the gun in bat- to a safe level, the two surfaces slide past one another, with all aftermarket extended magazines. Interestingly,
tery during the firing sequence are the bolt’s heft, and the and the bolt rotates free of the chamber’s lugs while trav- my testing suggested the opposite, where new-produc-
recoil spring tension. This leads to dramatically increased eling a short distance back into the carrier. tion, 23-round SGM tactical magazines ran without any
felt recoil because of this heavy bolt’s rapid, unhindered The carrier group then travels rearward, extracting the issues whatsoever.
rearward movement during extraction and ejection. spent casing, cycling the action and chambering a subse- Another intriguing magazine-related aspect of the gun
Thankfully, this logic isn’t lost on every designer, which quent round from the magazine (assuming it isn’t deplet- is the proprietary mag-release button. Even though the
is part of the reason Heckler and Koch found so much ed.) Which brings me to another solid design aspect of Guard is very clearly an AR-15-derived design, it doesn’t
success by adapting its 30 caliber, G3 battle rifle’s roller- the Guard: its magazines. Older AR-15 carbines cham- utilize a standard magazine release button. Instead, the
delayed action to the smaller, 9mm MP5 SMG. Although bered in .45ACP often fed from Thompson or Grease CMMG carbine uses an oversized, ribbed button that
a tremendous improvement over direct blowback, this Gun magazines. While these are excellent in terms of du- dramatically speeds up reloading times. Shooters with
design isn’t perfect. For starters, the barrel is pressed into rability, they are heavy and, unlike in the past, no longer smaller hands will be especially pleased with it, as it is
the receiver, requiring either special tools or a profession- inexpensive. nearly a full inch closer to the pistol grip than the stan-
al to replace. Thus, when the system fatigues, the guns Instead, the engineers at CMMG chose to feed their dard AR-15 magazine release.
require the installation of larger rollers to compensate for newest creation with the most inexpensive, common, While the magazine release is proprietary, thankfully
the action stretching. reliable, double-stack .45ACP mag on the market—the the charging handle is not. While it’s arguable that the
This wear and tear wouldn’t be a significant issue if Glock 21’s polymer magazine. With steel-reinforced feed- charging handle/latch of the AR-15 isn’t suited to close
the components involved could be easily replaced or ser-
viced with hand tools. After all, this ease of maintenance/
customization, is one of the driving factors behind the
AR15’s rise to popularity. Which is one of the reasons I The Guard is offered in several different
was so excited when CMMG introduced the latest addi- finishes, including this gray Cerakote.
tion to its product lineup: the Guard.
The CMMG Guard, is a radial-delayed blowback,
pistol caliber carbine, chambered in .45 ACP. Radial-
delayed? Your lying eyes do not deceive, CMMG has pio-
neered a new method of delayed operation for its 230gr-
projectile launcher. The Guard uses a standard AR-15
bolt carrier with a modified carrier key and bolt. The bolt
still rotates during the ’unlocking’ phase of operation,
though it never really locks in the first place. Where the
lugs on a standard AR-15 bolt align with the chamber’s
lugs to lock the action shut (directly resisting rearward
force from a detonating round,) the lugs on the Guard’s
bolt are different. Instead of siphoning gas from the front
sight tower and pushing against the carrier’s gas key, the
expanding gasses act directly on the bolt face through the
barrel/chamber. Because the bolt lugs are cut at 45-degree
angles, the rearward force of expanding gasses doesn’t
open the action immediately, as friction between the two
Field-stripping is as easy as
with any AR-15-type firearm.
quarters use, and thus not appropriate on pistol caliber Lastly, the muzzle of the Guard ships with a modified
carbines, it does have one advantage. Since the design is version of the combination brake/compensator seen on
identical to that of a mil-spec M16/M4, shooters have a nearly all CMMG’s rifles. In testing, it was tremendously
near inexhaustible supply of aftermarket options with effective as taming what little bark the radially-delayed
which to replace it. .45 ACP produced.
I confirmed this with two of my favorite replacement Under the compensator, the Guard’s muzzle is threaded
chargers, the Next Level Armament NLX 556 Ambi to .578x28 RH—the same as aftermarket Glock 21 barrels.
Charging handle, and the Devil Dog Concepts Hard- I installed my personal SilencerCo Osprey 45 with the ap-
Charger. The NLX product simply gives southpaws and propriate piston to the Guard, and found it to be incredibly Like all of CMMG’s big-bore rifles, the Guard ships
right-handers more leverage on the charger, allowing for quiet with 230gr ball ammo. This was especially the case with its combination compensator/muzzle brake atop
easy, one-handed manipulation, while the DDC Hard with Wolf Performance Ammo’s steel-cased 230gr FMJ. its .578x28-threaded muzzle.
Charger transforms the host rifle into a side-charger. Nei-
ther replacement required any fitting, and both worked as
well or better than the factory, mil-spec charging handle.
On the other side of the Guard, the lower features the
same bolt-release button as an AR-15. A factory ambi-
dextrous release would have been nice, but since it uses
AR-15 mil-spec parts, shooters can simply replace it with
something else if they’re not satisfied.
Heading rearward, the Guard utilizes a mil-spec M4
buffer tube, and ships with a Magpul MOE stock in
black. A matching Magpul MOE grip resides just for-
ward of the buffer tube and makes for a handsome, yet
utilitarian, appearance. Above it, the Guard again bor-
rows from the AR-15, shipping with a standard selector,
and mil-spec trigger.
Continuing forward, the Guard ships with a free-float-
ed handguard from CMMG. The 14-inch KeyMod guard
features a full-length Picatinny rail on top that blends
seamlessly with the fully-railed upper receiver. The two
combined result in nearly two full feet of Picatinny rail! The Guard ships with a free-floated RKM11 14-inch rail sport-
This is more than enough rail real-estate for any combi- ing KeyMod slots on three sides and a Picatinny rail on top.
nation of scope/magnifier/night vision setup.
NEW BOSS!
S&W IMPROVES THE IMPROVED—THE M&P 2.0!
E
arlier this year, in these pages I documented Smith It’s been just about 12 years since Smith & Wes- holsters in this country. In the last decade that percentage
& Wesson’s new M&P 2.0. At the time of introduc- son introduced the M&P pistol. Before that, to most has dropped precipitously, in large part due to the Smith
tion, the second generation of the M&P was avail- gun owners, when it came to reliable polymer-framed, & Wesson M&P.
able in two flavors, a 4.25-inch barreled black model, striker-fired pistols, there was the Glock…and that was Chances are, if you meet a police officer in this country
and a 5-inch FDE with thumb safety. Now that they’ve it. That completely changed with the introduction of the and glance at what he’s carrying, the pistol in his holster
caught up on initial orders, Smith & Wesson has started S&W M&P. will be either a Glock, SIG P22(X) series, or a Smith &
introducing additional models of the M&P 2.0, and for In the eyes of many, because of its “proper” 18-degree Wesson M&P. For a pistol design that is barely more than
this review, I’ve secured a sample of the new 4.25-inch grip angle and the fact that it is made in the United a decade old, that is very impressive.
FDE model with TruGlo TFX sights. States, the Smith & Wesson M&P is the first choice in The standard model M&P9 (M&P stands for Military
Let’s look at how the M&P has changed the polymer polymer pistols. Before the introduction of the M&P, and Police, and M&P9 is this semi-auto pistol chambered
pistol landscape, and what changes have been made to the Glock owned the law-enforcement market in this country in 9mm) features what Smith & Wesson from the start
M&P 2.0 before we get into the specific details of this pistol. with their pistols in reportedly two-thirds of the police has advertised as a 4.25-inch barrel, but what I’ve learned
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 15
Smith & Wesson added some forward-slide serrations, The TruGlo TFX sights are longer because, behind
but Tarr wishes there were a lot more of them. Note also the fiber-optic rod, is a tritium insert for low- and The rear sight has two fiber-optic rods/tritium inserts,
the new placement of the serial number right below, no-light shooting. The front sight has a white circle but no white outline. Note the windows on the top of
which is actually etched into the longer steel chassis. around the fiber-optic rod. the sight to help gather light for the FO rods.
recently is that they actually round up for convenience’s 3. M&Ps chambered in .40 S&W didn’t jam when you First generation M&Ps have an advertised 6.5-pound
sake. The barrel is actually 4.19 inches long. hung a weapon light off the rail like Glocks did. (This pull, and just about every pistol I picked up with a factory
The barrel and slide of the M&P are stainless steel and fact isn’t well-known outside law enforcement circles, trigger had a pull somewhere around 6.5 pounds. Six and
treated with a corrosion-resistant nitride coating. The but it is the main reason the Gen 4 Glocks exist.) a half pounds seems to be the standard trigger pull not
original M&Ps were given S&W’s Melonite nitride coat- For 11 years, Smith & Wesson expanded its line of just for first-generation striker-fired pistols, but for pistols
ing. The pistols featured 3-dot steel sights, and the rear M&Ps, but you know what it didn’t do? It didn’t alter the designed to be LE or military “service weapons,” as the
sight had a no-snag design. design. Sure, there have been some tiny internal tweaks M&P is and was. In my experience as a trigger pull weight
In 9mm, the M&P has a 17-round magazine capacity to sears and extractors, but the M&Ps on the market in goes above five pounds, it gets exponentially more difficult
and comes with three interchangeable backstraps (small, 2016, were virtually identical to the ones introduced in for even skilled shooters to keep the sights steady while
medium, large) to better fit the gun to your hand. In ad- 2006. Heck, Glock only waited six years before introduc- pulling the trigger, but that’s a rant for another article.
dition to the standard firing pin safety, the curved, hinged ing the Gen 2 models. Upgrading the trigger on an M&P is considered (by
trigger of the M&P also has a safety to prevent the gun The M&P 2.0, introduced in early 2017, was the first gunsmiths) to be relatively easy. If you’re doing the work
from firing if dropped. Trigger pull was usually right at major change to the pistol line. Technically, it is the M2.0 by hand, it just takes a little modification to the sear an-
the advertised 6.5 pounds. but nobody calls it that in conversation, not even the peo- gles and the edges on the firing pin safety plunger to get
Over the course of a decade, several different variations ple from S&W. After a decade of user input and in-house an M&P trigger pull safely under three pounds, if you
of the M&P were made, offering thumb safeties, magazine- engineers eyeballing the design, the M&P 2.0 is a well- want it that low. Those parts are tiny, however, and you’ll
disconnect safeties, 5-inch barrels, and models with differ- thought out upgrade to this pistol line, and the changes need the proper tools. It’s a lot easier to just buy a re-
ent sights. The M&P earned a reputation for reliability and to these factory pistols are a direct result of S&W seeing placement trigger kit. For years, Apex Trigger Specialties
became popular with the U.S. shooting public as well as law what was being done to its pistols out in the wild. has been selling highly regarded trigger kits for the M&P
enforcement, especially in .40 S&W, replacing the Glock in By far, the two most common types of customization pistol, including sears and firing-pin plungers with im-
large numbers. This was due to a number of reasons: done to M&P pistols have been trigger jobs and increas- proved angles, as well as reduced power springs.
1. Made in America ing the texturing of the grip area, usually through stip- Smith & Wesson engineers reduced the trigger pull on
2. Interchangeable backstraps to better fit the gun to pling. Let’s look at those two areas before we dive into the M2.0 via (mostly) improved geometry in the sear and
variously sized officers other details. striker. The trigger bow is still the same curved plastic
A comparison shot.
This is an M&P 2.0 This M&P’s loaded
with standard factory chamber indicator is a
sights. Steel and a no- hole above the breech-
snag rear, but with plain face. Tarr finds these
white painted dots. very hard to use, except
in direct sunlight.
model with a hinge in the middle. The targeted spec for FYI, I avoided hand-stippled grips on my competition
the M2.0’s trigger pull is 5.5 pounds, and every sample 2.0 pistols for years, in part because I always carried what
I’ve gotten my hands on has had a trigger pull within a I shot in competition and vice versa, and was worried
quarter pound of that spec. And the breaks seem a little stippled grips might rub holes in my shirts. But I’ve been
crisper as well, making them feel lighter than their actual carrying hand-stippled polymer-framed pistols for years
weight. That is a definite improvement over the previous now, and have never had a problem with them putting
generation, although I think it’s still too heavy for a trig- holes in my clothes.
ger pull if you know what the hell you’re doing. What may seem like no big deal, but I think is, is the ad- The scalloped serrations at the rear of the slide haven’t
I think “duty” triggers should be heavy enough to pro- dition of a new backstrap size. With the original M&P, you changed, but with the 2.0, you’ll see S&W has added
vide a crisp break but light enough to allow the average had your choice of three backstraps, small, medium, and some serrations at the front of the slide. They’ve only
shooter to hit a head shot at 25 yards, which means light- large. (FYI: the folks at Smith & Wesson told me something been added to the bottom, wider part of the slide where it
er than 5.5 pounds. Personally, I’d like to see 4.5-pound like 85% of their users prefer the size Medium backstrap.) meets the frame, and if you blink, you might miss them.
trigger pulls on duty pistols, but pulls “that light” would What is new with the M&P 2.0 is the addition of a medium- Still, they’re better than nothing, but I wish S&W had
probably scare police administrators, who view any mon- large backstrap, which takes the medium and adds material been willing to move some of the slide markings to fully
ey spent on proper firearms training as being wasted, and under the web of the hand to increase reach to the trigger. serrate the front of the slide. What they’ve done almost
who, when in doubt, want heavier trigger pulls so their of- I never owned an M&P, simply because, with the origi- falls into the “why bother?” category.
ficers can’t “accidentally” fire their pistols, which usually nal three backstrap choices the gun never fit my hand as On the left side of the slide, about level with the breech-
results in a lot of missed shots and injured bystanders. well as I wanted it to—the medium backstrap was a tiny face, you’ll see “M2.0” which is very small. That’s the
But didn’t I mention that was a rant for another article? bit too small for my taste, and the large was too big. I’m only literal indication that this is the new model M&P.
Perhaps I wasn’t listening to myself. It happens a lot. guessing I wasn’t the only person that had this complaint, The internal steel chassis inside the polymer frame is
More than the trigger-pull weight, what a lot of people and my evidence for this is the medium-large backstrap. much longer on the 2.0 than on the original M&P. This
didn’t like about the trigger pull on the original M&P was With it in place, the pistol now fits my hand perfectly. The “embedded, rigid, stainless-steel chassis” also has an Ar-
the lack of a discernible reset. Okay, now this is the per- distance to the trigger with the medium-large backstrap mornite coating. On the original, the chassis didn’t ex-
fect place for this particular rant. installed is still a bit less than you’ll find with a Glock. tend much past the front of the trigger guard, but on the
Riding the reset on a defensive firearm is just stupid. If you hold up one of the new pistols, it is obviously new model, the steel in the frame goes most of the way
You should use the recoil of your shot to reset the trig- an M&P, and the external differences between an original out to the end of the frame, doubly ensuring that there
ger, so you can fire a second shot as soon as necessary. But and M&P 2.0 might be a bit hard to spot. The first obvi- won’t be any flex if you hang a big weapon light on the
I see YouTubers riding trigger reset religiously, especially ous change to the eye might be the lack of a beavertail frame’s tactical rail.
on ARs; bang, pause, wait for it, wait for it, have another on the frame. Now the rear of the frame doesn’t stick out On the original M&P, the serial number in the steel
sip of your coffee, check the inbox to see if you got any new any further than the rear of the slide. chassis could be seen through a window cut into the poly-
emails, then finally you hear click as they reset the trigger.
Reset is definitely important when you’re trying to win
the Wimbledon Cup or go for the small-bore gold medal
at the Olympics, but in any real self-defense scenario (es-
pecially involving a pistol,) nobody will be worried about
the reset on their trigger, they’ll just be pulling it as fast as
possible until the problem is solved. And so should you
train. Still, S&W engineers addressed the whining—er,
issue, —and the triggers on the M&P 2.0s have very posi-
tive reset; you can both hear and feel it.
As for grip work, for many people, the factory textur-
ing on the grip of the original M&P was too slick. As a
result, hand stippling was a common sight. Some people
stippled both the frame and the removable backstraps,
whereas others only did the backstraps.
With the 2.0, S&W has increased the aggressiveness of
the texturing on the front and sides of the frame, as well
as the backstraps. Modern manufacturing is amazing, be-
cause the factory texturing on the 2.0 feels as aggressive
as hand stippling with a soldering iron. That is no exag-
geration. There is no hand work going into these pistols,
this is just the result of improved injection-molding tech-
The M&P 2.0 comes with four
nology, but I am not overstating it when I say that the fac- backstraps, from left: small, medium,
tory texturing on the M&P 2.0 is as rough and grippy as medium-large, and large. It only takes
hand stippling. These pistols will not move in your hand a few seconds to swap them out.
when you’re shooting.
Like most
modern pistols,
some way to partially cover the windows above the fiber-
the M&P—both optic rods on the rear sight so they were noticeably less
generations—is bright than the front sight during the day. This would not
quick-and-easy affect at all how bright the tritium would be at night.
to fieldstrip for When Smith & Wesson first rolled out the 2.0 to a group
cleaning and of gunwriters, we put a hundreds, if not over a thousand
maintenance.
rounds without a single malfunction through guns at
the S&W Academy. When I got a test-gun shipped to
me I blasted even more rounds through it, including 240
rounds in 90 minutes at the live-fire simulator at my local
FFL (www.doubleaction.com,) blasting virtual zombies,
terrorists, and watermelons. I never had a problem then,
and I never had a problem with this TFX model. Point it,
pull the trigger, and it goes bang.
I had a lot of fun running plate racks, as well as put-
ting holes in USPSA and IDPA cardboard targets. This
is a full-size, “duty-size” pistol with very aggressive grip
texture, chambered in 9mm, which means it is very pleas-
ant to shoot, especially with these great sights.
I’ll never be a guy to tell anyone they can’t customize a
gun they own, but with the new M&P 2.0 series, especially
this model with its improved sights, as long as you’re hap-
py with the trigger-pull weight, there is absolutely nothing
mer at the rear of the frame. In the 2.0, the serial number Fiber-optic rod inserts in handgun sights catch the light that needs to be done to optimize the pistol.
in the steel chassis is located above the tactical rail, visual and glow like they’re battery powered, making your sights
proof the chassis extends much further. amazingly easy to pick up. They work great if there’s any
There are small cutouts at the bottom of the frame kind of light, but at night they provide nothing extra. Triti- SPECIFICATIONS
on each side to give you a little better grip on the floor- um inserts are self-luminous and visible in low and no light,
plate of the magazine, in case you have to strip one out but during the day work no better than traditional 3-dot SMITH & WESSON M&P M2.0 FDE WITH
by hand. The M&P 2.0 uses the same proven magazines sights. Most modern day/night sights offer some combina- TRUGLO TFX SIGHTS
as the original M&P, so if you’ve got some of those lying tion of tritium and fiber-optic or sear-your-eyeballs-out-
Type: Striker-fired semi-auto
around, you can use them to feed the new pistols. bright paint, and the first generation TruGlo TFO sights
When it comes time to take the pistol apart for clean- are the earliest day/night sights of which I’m aware. Caliber: 9mm Luger
ing, you’ll also find the same lever inside (reached through Both the original TFO and the current TFX sights from Capacity: 17+1
the ejection port,) which, when pushed down, allows you TruGlo feature self-luminous tritium inserts protected in-
to disassemble the pistol without pulling the trigger. Or, side a steel sight body. In front of each one of those tritium Barrel Length: 4.25"
you can just pull the trigger to get the top end off after inserts in the same steel sight housing, is a fiber-optic rod. Overall Length: 7.4"
verifying the pistol is empty. The top of the steel housing is cut out above the fiber-optic Height: 5.5"
That idea horrifies S&W executives who like to adver- rod so it can gather light. During the day, the fiber-optic
tise one of the “benefits” of their pistol to law enforce- inserts shine bright, and at night the glow of the tritium Width: 1.3"
ment is that you don’t need to pull the trigger to disassem- insert can be seen through the fiber-optic rods. Weight: 24.7 oz.
ble it. Personally, I think if you can’t figure out whether So what’s the difference between the original TFO and
Slide Material: Stainless steel with Armornite
or not your gun is loaded before you pull the trigger, you current TFX? With the current TFX sights, as found on
coating
need to go back to the police academy for some remedial the M&P9 2.0, both the tritium insert and the fiber-op-
training! But, fixing a symptom rather than the problem tic rods are sealed inside a capsule. Not only does that Frame Material: Polymer
is reflexive for police bureaucrats and how we got the make the TFX an inherently stronger sight, now the sight Safeties: Sear block drop safety, trigger
“don’t AD me bro” lever in the M&P and the 12-pound components are protected from damage from any strong safety lever
“New York Plus” trigger for Glocks, which really should cleaning solvents. If you’ve got an ultrasonic cleaner, you
be called the “Injured Bystander” based on results. can just drop the top end of the pistol into it now, with- Sight: TruGlo TFX fiber optic/tritium
Here endeth my last rant, I promise, least for this article. out worrying about damaging the fiber optic rods. The Trigger: 5.5 lbs (as tested)
Now, let’s talk about this TFX-equipped new model steel sight housings are also given what TruGlo calls its Accessories: Two 17-round magazines,
M&P, specifically. On this pistol, and on every FDE corrosion-resistant FORTRESS FINISH, which appears 4 backstraps
M&P 2.0 pistol I’ve seen in-person, the frame and slide to be a form of nitriding.
weren’t quite the same hue, but personally, I think this Due to their design, the sights themselves are longer MSRP: $699
makes the gun look better, not worse. The FDE Cerakote than standard sights, but they don’t get in the way, and Manufacturer: Smith & Wesson
went on over the nitride Armornite, which went on over a the pistol, when so equipped, will fit into all the same www.smith-wesson.com
stainless steel slide, so this is about as corrosion-resistant holsters. The front sight sports a white ring around the 1-800-331-0852
a pistol as you’re likely to find anywhere. outside of the fiber optic to make it a little bigger to the
This is the standard model M&P9, with a declared eye when aiming down the sights.
Load Bullet Velocity SD Group
4.25-inch barrel (actually 4.19" as I mentioned above) If you bought them separately, the TruGlo TFX sights
Weight (in.)
and a full-size frame, which accepts 17-round magazines. would cost you $172.00, plus installation. At $699, the
The pistol ships with two magazines, and the floorplates M&P9 2.0 FDE TFX is priced just $100 above a standard Black Hills
115 1129 16 2.8
of the FDE pistol match the frame. Measured trigger pull 4.25-inch pistol—and they installed the sights for you at TAC-XP+P
on this sample was right at 5.5 pounds and crisp. Well, the factory. SIG Elite JHP 124 1166 21 2.2
crisp for a striker-fired gun. In my opinion, these sights are a definite upgrade over
This pistol has no magazine-disconnect safety, no thumb the factory sights, the only question is whether the sight Hornady Critical
135 1118 19 3.1
safety, and the loaded chamber indicator is a hole cut into the upgrade is worth the extra $100 to you. Duty+P
top rear of the barrel, as opposed to the flipper lever S&W Personally, I don’t like dots on my rear sight. The rear Winchester
147 951 19 2.5
offers on some models. But the real news is in the sights. sight is a window frame, you should be looking through JHP
Smith & Wesson has swapped out its traditional steel it, not at it. But these are day/night sights, and covering Accuracy results are the averages of four five-shot
sights with three white dots on this model for a set of up the dots so they’re not as bright during the day, if done groups at 25 yards from a sandbag rest. Velocities are
TruGlo TFX sights. These sights are what are commonly in the wrong way, would mean at night, the glow from the averages of ten shots measured with an Oehler Model
known as day/night sights, and what I think are currently tritium lamps would be dimmer as well, and that would 35P, 12 feet from the muzzle.
the cutting edge in tactical handgun sights. Let me explain. not be a good thing. If this were my gun, I would find
SPANISH
RUBY
PISTOLS
DESPERATE TIMES
CALL FOR DESPERATE MEASURES!
By Paul Scarlata Photos by: James Walters, Paul Budde & Becky Scarlata
W
orld War I is often referred to as a “Handgun machine-gun crews, signalers, messengers, transport driv-
development of a large metal-working industry, much of
War,” because the typical infantry rifle was ill ers, military police, and every infantryman who wanted,
which, since the 17th century, has been devoted to the
suited to the unique conditions of the conflict. In and in many cases needed, a handgun.] But this led to an-
production of weapons. Eibar firearms production was
the close confines of a trench, or when crawling through other problem—most armies lacked sufficient handguns
based upon cottage-type industries, where a “company”
barbed wire entanglements, a long, bayoneted rifle was a (and rifles, machine guns and artillery pieces, for that
would subcontract out the production of various compo-
hindrance. Front-line troops soon realized that a pistol or matter) to equip their rapidly expanding forces. nents to small shops, who would deliver them to a central
revolver was a necessity—to say nothing of a comforting The situation in l’armée Française was desper- location for fitting and assembly.
companion—when it came to trench fighting. It wasn’t ate. France’s standard-issue sidearm, the Revolver Due to Spain’s lax patent laws, the Basques were noto-
long before most armies were issuing sidearms in greater d’Ordnance Modéle 1892, could not be produced in suf-
rious for the manufacture of unlicensed copies of well-
numbers than ever before or since. [Officers, artillery and ficient quantities to meet demand, so while many older
known firearms—which they sold around the world at
Modéle 1873 revolvers were re-issued, it was only a stop-
cut-rate prices, so it was no surprise that shortly after
gap measure. At first, the French ordered revolvers from
the introduction of the first successful semi-auto pistol,
a number of Basque gun makers, who delivered copies of
the Fabrique Nationale’s Pistolet Automatique Browning
Smith & Wesson and Colt revolvers chambered for the
Modéle 1900, that Basque-made copies began appear-
standard 8mm Cartouche d’Ordnance Mle. 1892 revolver
ing. Around 1905, Basque gunmakers began production
cartridge. But high levels of battlefield attrition meant
of simple, blowback-operated pistols—chambered for
that more weapons were needed—right now! the 7.65mm Browning (.32 ACP) cartridge—that com-
The mountainous region around the city of Eibar in
bined features of FN’s improved Modéle 1903 and Colt’s
northeastern Spain possesses an abundance of iron,M1903 designs but, as was the usual practice with their
coal and water power, which, when combined with the
pirated copies, the Basques simplified the basic design to
industriousness of the native Basque people, led to the
reduce production costs and time.
First of all, Basque pistols possess none of the fine
lines and ergonomics of the FN/Colt, and most display
French WWI handgun cartridges (L to R): 11mm Car-
a squared-off silhouette with steep grip-to-frame angle.
touche d’Ordanance Modéle 1873/90, 8mm Cartouche They replaced the Browning’s efficient, but difficult-
d’Ordanance Modéle 1892 and Cartouche de 7,65mm to-produce, thumb and grip safeties with a simple lever
pour P.A. (Lou Behling photo) on the left side of the frame which, when rotated up 45
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 19
I
n the last ten years, there has been an increasing in- purchasing sound suppressors for recreational shooting, The world we live in is changing though, and more and
terest in sound suppressors here in the United States. competition, hunting and the health of themselves and more companies are adding models that come from the
More and more shooters and hunters have become in- their loved ones. factory ready to accept a sound suppressor. The CZ 527
terested in the benefits they offer leading to an explosion As sound suppressor sales took off, and interest in them in 7.62x39mm seen here is just such an example. New
of sales, especially over the past five years. Many shoot- grew, the firearms industry noted and responded to this from CZ-USA, the CZ 527 Synthetic Suppressor-Ready
ers, after having the opportunity to shoot a suppressed new market. While many firearms, such as AR-15s, can comes with properly cut 5/8x24 muzzle threads. This
firearm, immediately recognized the benefits. They, in easily mount a sound suppressor due to their threaded makes mounting the sound suppressor of your choice as
turn, would buy one, let others try it, and the cycle would muzzles, it’s a different story for many traditional designs. easy as possible, out of the box. Available in two calibers,
continue. The “mystery” also has been removed from le- This is especially true for bolt-action rifles, which typical- 300 AAC Blackout and 7.62x39mm, this handy and com-
gally purchasing a sound suppressor. No longer do you ly do not feature muzzle threads. So if a rifleman wanted pact little bolt gun is sure to appeal to many.
need to try to figure out the paperwork and procedure to add a sound suppressor to his favorite bolt gun, he When Firearms News was offered the opportunity to
yourself. Websites with detailed, step-by-step informa- typically had to send it out to have the muzzle threaded. have a first look at this new model I pondered which cali-
tion abound to walk you through the purchasing process. This is a bit of a hassle and another added expense shoot- ber to select. While the 300 AAC Blackout seems like a
Due to this, more shooters than ever are interested in ers previously swallowed to shoot quietly. natural, I chose the 7.62x39mm instead. Why select this
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 23
THE
SUPPRESSOR-
READY CZ 527!
CZ-USA’S HANDY 7.62X39MM BOLT GUN
By David M. Fortier
NOW ACCEPTS A SOUND SUPPRESSOR Photos by Author and Neal Shera
old Combloc cartridge over the darling of the shoot-quiet Soviets fielded suppressed AKM rifles with a 200-grain the accuracy potential of the ‘98. Numerous matches and
crowd? Well, for a couple reasons, actually. The first is subsonic load. These saw use in Afghanistan and else- competitions, both formal and informal, have been taken
that 7.62x39mm is widely available in not only economi- where, so I was interested to see what a suppressed by target rifles built on Mauser’s venerable 1898 action.
cal steel-case loads, but also a host of modern expanding 7.62x39mm bolt gun could do. Today, more than a century after its introduction, the
domestic offerings as well. Winchester, Hornady, Wolf There are few rifles that garner the world-wide respect 1898 Mauser is still going strong. One company in par-
and Federal all offer excellent loads with modern bullets, the 1898 Mauser does. Designed to endure the hardships ticular, Ceska Zbrojovka (CZ) of the Czech Republic,
which expand reliably. Also, for the handloader reloading of a military life, the ‘98 has given yeoman service around continues a long tradition of building fine hunting rifles
data, components and dies are all readily available. the globe. With a rugged and reliable action, the ‘98 Maus- on this famous action. An old well-established Europe-
My third reason for choosing this model is one most er is one of the few military arms to be openly embraced an company whose history dates back to 1936, CZ has
do not consider, the compact 7.62x39mm is an excellent by hunters and target shooters alike. Hunters appreciated earned a reputation for manufacturing quality firearms.
candidate for subsonic ammunition. Some companies do the action’s good looks, strength and positive feeding. Today, CZ-USA offers an extensive line of handguns as
offer subsonic 7.62x39mm ammunition, and I have been Down through the years, game large and small, have been well as sporting rifles.
shooting factory subsonic loads in this caliber for well taken on the various continents with custom sporters built The CZ 527 is built on a tiny, modified ‘98 Mauser
over a decade. It’s also noteworthy to point out that the around this action. Target shooters were also quick to note action. While not a straight 1898 clone, it shares all the
SUPPRESSOR-READY CZ 527!
PAGE 24 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
virtues inherent in the famous 1898 Mauser system. The zines. The magazine is a nicely made steel, single-column close, so I thought I would give it a try. Not only is this
action is extremely rugged and features dual-opposed design. It holds five rounds, inserts with a simple upward scope the perfect size but the magnification is also a good
locking lugs on the front of the bolt. A massive extrac- push and is easily removed. The magazine release is lo- match for the performance of this handy little rifle. Better
tor claw runs the length of the bolt, providing controlled cated on the right side of the receiver. yet, the combination was pleasing to the eye.
round-feeding. This precludes the possibility of an oper- Another departure from the original 1898 design is the Every rifle needs a sling, so I contacted Brownells to
ator-induced double-feed under stress, and points to the safety. It has been moved from the rear of the bolt to the try one of the 1¼" brown leather Montana slings it offers.
action’s military heritage. Primary extraction and cock- right side of the action. This is a definite plus if an optical Crafted from thick, high-quality bridle leather, it features
ing are on the opening stroke. sight is to be mounted. a unique adjustment knot braided into the leather. This
A square bridge design, the CZ 527 features 16mm The addition of a single set trigger is a desirable feature allows the rifleman to quickly adjust the sling by sliding
scope mounts machined directly into the receiver. This of the 527. The rifleman can “set” it by simply pushing for- it. No buckles to adjust, just grab it and go. Once adjust-
makes mounting an optical sight straightforward with no ward on the trigger until it clicks. It then provides an ex-
need to acquire separate bases. Mated to the front of the tremely light single-stage pull. This is a very useful feature
receiver is a handy 16.5-inch cold hammer forged barrel. especially when firing for accuracy from the bench. The
This features a 1-9.5-inch twist, allowing use with a wide single set trigger is one feature I really like about CZ-USA
range of bullet weights. The muzzle is specifically de- rifles although I love the classic look of a double-set design.
signed to accept a suppressor or suppressor mount with This model is just 35 inches long and weighs only 5.9
standard 5/8x24 threads and a slightly oversize shoulder. pounds, making it very compact and handy. Finish is a
Unlike some of CZ’s other models the Synthetic Suppres- handsome blue, and the MSRP is $748.
sor-Ready dispenses with barrel mounted iron sights. With rifle in hand, I needed a suitable optic for it. I was
The barreled action is dropped into a rugged black looking for something that complimented the CZ with-
synthetic stock. Designed for the American rifleman, it out being too big or heavy. Plus, I wanted something with
features a 13.5-inch length of pull and distinctly Ameri- a useful reticle for extending the distance a bit. I settled
can, rather than Central European, aesthetics. The poly- on a Leupold Tactical Mark IV, 1.5-5x20mm MR/T. The
mer stock features a black rubber recoil pad and sling model I chose has a BDC reticle designed for use with
studs on the fore-end and toe of the stock. The front stud both super and subsonic 300 Blackout ammunition. It
can be used to mount a bipod, sling or both. provides holdovers to 850 yards for supersonic ammuni-
Rather than a traditional internal box magazine, the tion and 400 yards for subsonic ammunition. The exteri- A look at the CZ’s short bolt.
CZ 527 feeds from convenient, detachable box maga- or ballistics of the 300 Blackout and 7.62x39mm are very Note the long claw extractor and dual locking lugs.
SUPPRESSOR-READY CZ 527!
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 25
A 1.5-5x20mm
Leupold Mark IV
MR/T scope, mounted The CZ 527 proved easy
using a set of CZ rings, to carry and provided
complimented the small very good accuracy
bolt gun nicely. from field positions.
ed, the design of the knot keeps it in place. It has a certain learned about his company and what he was doing and was fed and chambered without issue. The CZ 527’s trigger
look you will either love or hate. The quality is first-rate impressed. While this is an older load no longer offered, it is good in its standard state, and well-suited for field use.
though, with nice, thick leather and quality stitching. was what I had in the ammo bunker. Currently EBR, offers Push it forward to its set position, and it is fantastic. It’s
Sling swivels are included, so it’s ready to mount. While two subsonic 7.62x39mm loads, a 220-grain “Jackhammer” extremely light and crisp. The set trigger is extremely use-
not cheap at $50.57, it’s an interesting design. SP and a 220-grain “Ghost” Expander. The latter is a solid- ful when firing for group from the bench. Extraction and
There’s no point in having a suppressor-ready rifle with- copper design that expands. Many shooters are unaware of ejection was positive with zero issues.
out having a sound suppressor handy, so I removed the factory 7.62x39mm subsonic ammunition, so I thought I I’ve shot a number of 7.62x39mm chambered CZ 527s
factory thread protector the CZ comes with and replaced would include what I had on hand, even though it is no over the years and while all performed well, none really
it with a 5/8x24 LaRue Tacticals TranQuilo muzzle brake/ longer available. I felt it would give readers an idea of the stood out. This particular rifle, though, shot very well,
sound suppressor adapter. By itself, this unit acts as a con- possibilities. and I posted the smallest group I have ever fired in this
ventional muzzle brake to reduce felt recoil and muzzle The CZ 527 Synthetic Suppressor-Ready carbine was caliber. My best group of the day was fired using Hor-
movement. Plus, it looks cool. More importantly, it also shot from a rest with rear bag at 100 yards to evaluate nady’s 123-grain SST and measured an impressive 1.1
acts as a mounting adapter for LaRue Tactical’s Tran- accuracy. Four five-shot groups were fired with each inches. This load averaged a respectable 1.5 inches at
Quilo sound suppressor. The TranQuilo was specifically load. Velocity readings were measured with a LabRadar 2,328 fps. Wolf’s 123-grain FMJ load posted a best of 1.2
designed for the Larue family of semi-automatic precision Doppler radar chronograph. When I first took the CZ inches and averaged 1.8 inches at 2,387 fps. Winchester’s
rifles and reduces the report to hearing safe levels and al- out of the shipping box, I noted the barrel was not quite 120-grain PDX1 load opened up a bit and averaged 2.1
most eliminates flash. What sets this unit apart though, is centered in the barrel channel of the stock. It was bear- inches at 2,282 fps.
its Safer Operator Technology (SOT,) which reduces gas ing to the right side, and I was worried this would affect The EBR, Inc. 220-grain FMJ subsonic load had a point
blow-back emitted from the ejection port of an AR rifle. accuracy as the barrel heated. The action was a bit on the of impact 7.5 inches lower than the others, and two inches
While designed for use on AR-15-type rifles, I’ve used rough side, and required a bit of force to work, fresh out to the right. It posted a best of 1.7 inches and averaged 2.2
the TranQuilo on a variety of designs. Calibers I’ve per- of the box. inches at 1,007 fps. It was quiet enough that I had a group
sonally shot through it include 7.62x51mm NATO, .260 The CZ 527’s single-stack magazine loaded to full ca- of about 10 wild turkeys strut across my range while I was
Rem, .25-08, 6.5mm Grendel, 300 Blackout, 5.56x45mm, pacity easily, and it snapped neatly into the rifle with a shooting. It fed and functioned with zero issues.
and now 7.62x39mm. Performance has been excellent. simple upward push. I could feel the bolt dragging slight- Next, I moved to running the CZ 527 on steel from
Manufactured from 17-4 PH Stainless Steel and Incoloy ly on the feed lips as I ran it forward. Even so, rounds field positions, shooting out to 550 yards. I have quite a
A-286, the TranQuilo is eight inches in length and weighs
23 ounces. Retail price on the TranQuilo is $699.
With optic and sound suppressor mounted, I only
needed ammunition. I selected three popular 7.62x39mm
loads for testing. These consisted of Hornady’s 123-grain
SST, Winchester’s 120-grain PDX1 Defender Split Core
Hollow Point, and Wolf Performance Ammunition’s Mil-
itary Classic 123-grain FMJ. Both the Hornady and Wolf
loads feature steel cartridge cases, while the Winchester
load features nickel-finished cases. Both the Hornady and
Winchester loads feature expanding projectiles suitable
for medium-sized game or self-protection. The Wolf load
is very economical, allowing lots of practice and recre-
ation for a small outlay of cash.
In addition to these loads, I also included one subsonic
load from Engel Ballistic Research (EBR,) Inc. This was its
old 220-grain subsonic FMJ load originally intended for
use in suppressed 7.62x39mm AR carbines. Many years
ago, the company’s founder, Whit Engel, and I attended an
Advanced Tactical Marksman Observer course together. I
SUPPRESSOR-READY CZ 527!
PAGE 26 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
SUPPRESSOR-READY CZ 527!
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 27
2B
Dept. SG / 440 Miller Valley Rd / Prescott, AZ 86301 • Hours: Mon-Fri: 8 am to 5:30 pm / Sat: 9 am to 3 pm MST • Fax: 928-445-9658 • Email: info@jgsales.com
Mega Arms AR-15 5.56mm Barrels Mega Arms MTS MATEN Megalithic Upper
MTS (Megalithic Tactical System) upper has been BCMGUNFGHTER Charging Handles
Mega Arms Match grade 416 stainless steel barrels fea- designed for a truly unique look. Machined from a single With medium latch. Features internal redesigns to direct the
turing black nitride finish, 1:8 twist, 1/2”-28tpi muzzle piece of 7075 aluminum and black hard anodized, fea- force off the roll pin and into the body of the charging handle
thread and 5.56mm chamber. tures a rifle length KeyMod handguard and QD sling during support hand only manipulations. Made by Vltor.
points on each side, shell deflector with 60.0° lug angle,
and integrated leveling system (patent pending), placed
BCMGUNFIGHTER AR-15 Charging Handles
Mod 4 with Medium Latch . . . . . . . . . . . . . . . . . 7-2528 $44.95
16” Mid-Length, Government Profile . . . . . . 7-2749 $259.95 between the upper receiver and hand-guard rails. Includes
Ambidextrous Mod 4 with Medium Latch . 7-2743 $69.95
upper receiver, dust cover door, forward assist, one
KeyMod rail, barrel nut & barrel nut wrench. BCMGUNFIGHTER 7.62mm Charging Handle
18” Rifle Length, SPR Profile . . . . . . . . . . . . 7-2750 $259.95 MTS MATEN Upper Receiver . . . . . . . 7-2747 $693.95 Mod 4 with Medium Latch. . . . . . . . . . . . . . . . . 7-2643 $54.95
* Warning: All firearms and ammunition buyers should receive proper instruction and training in the use of their
purchases before using these products. All used firearms should be certified safe by a licensed gunsmith before firing.
We offer a 30 day inspection period. After 30 days, all sales are final. If a problem arises at a later date, please contact the manufacturer
or importer, as any warranties are made by them. If merchandise needs to be returned within the 30 day inspection period, please call
ORDER INFORMATION: All orders must comply with all Federal, State and Local laws. For firearms purchases a faxed or emailed copy of for a return authorization number, or processing of your return may be delayed. Customer pays shipping both ways on returned or
the FFL or C&R is acceptable. C&R license must also be accompanied by a copy of the C&R holders government issued photo ID. For ammu- refused merchandise. Please call regarding any freight damaged merchandise. All returned merchandise must be in original condition
nition purchases you must be at least 21 years of age for handgun and at least 18 years of age for long gun and there must be no laws that and packaging and accompanied by invoice. A restocking fee may apply. U.P.S. SHIPPING, HANDLING & INSURANCE: Please see the
prohibit you from purchasing or possessing ammo. An adult must be present to receive and sign for all ammunition shipments. We accept Shipping Estimator on our website, www.jgsales.com, or call for exact shipping charges. Arizona residents add 8.35% sales tax. HOURS:
orders by mail, phone, fax or website. Payment can be made by cashier’s check, money order, VISA, MasterCard, Discover or American Express Open Mon. through Fri. 8:00 a.m. to 5:30 p.m., Sat. 9:00 a.m. to 3:00 p.m., MST, all year long. CLOSED SUNDAY. Some items not as
for prompt shipment. Merchandise purchased with business or personal checks will be held two weeks before order is shipped. pictured. We are not responsible for typographical errors. All prices are subject to change without notice.
PAGE 28 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
7.62x39mm 7.62x39mm
Semi-Auto Semi-Auto
RAS47 C39V2
100% American Made! With Wood Stock 100% American Made! With MOE Stock
New 7.62x39mm semi-auto AK style rifle, with stamped New 7.62x39mm semi-auto AK style rifle, new updated
receiver and 16 inch barrel, both with black Nitride finish, side Version 2 of the C39 rifle, features milled receiver and 16 inch
rail scope mount, removable slant cut muzzle brake, hardwood barrel, both with black Nitride finish, removable V-shaped
stock with a 13 inch length of pull, matching hardwood hand- chevron compensator, Magpul MOE black synthetic handguard,
guard and black synthetic finger groove pistol grip. Includes one grip, and stock, and AK standard front sight with black post.
30 round Magpul MOE magazine and owners manual. Includes one 30 round Magpul magazine.
Century Arms RAS47 Century Arms C39V2
with Wood Stock . . . . . . . . . . . . . . . . . . . . . . . . 1-2157 Call with Magpul MOE Stock . . . . . . . . . . . . . 1-1928 Call
with Magpul MOE Stock. . . . . . . . . . . . . . 1-2161 Call with Walnut Stock . . . . . . . . . . . . . . . . . . . . . 1-1993 Call
Call or see our website for best price Call or see our website for best price
7.62x39mm 7.62x39mm
Semi-Auto Semi-Auto
RAS47 C39V2
100% American Made! Magpul Zhukov Edition 100% American Made! Magpul Zhukov Edition
New 7.62x39mm semi-auto AK style rifle, with stamped New 7.62x39mm semi-auto AK style rifle, new updated
receiver and 16 inch barrel, both with black Nitride finish, side Version 2 of the C39 rifle, with milled receiver, 16 inch barrel with
rail scope mount, removable slant cut muzzle brake, Magpul black Nitride finish, removable V-shaped chevron compensator,
Zhukov-S collapsible side folding stock, Magpul Zhukov extend- black synthetic Magpul Zhukov extended length handguard,
ed length black synthetic handguard, and black synthetic Magpul Magpul MOE pistol grip, black synthetic Magpul Zhukov S collapsi-
MOE pistol grip with trap. Includes one 30 round Magpul MOE ble side-folding stock with buttpad, and AK standard front sight
magazine and owners manual. with black post. Includes one 30 round Magpul magazine.
Century Arms RAS47 Century Arms C39V2
Magpul Zhukov Edition . . . . . . . . . . . . . . 1-2173 Call Magpul Zhukov Edition . . . . . . . . . . . . . . 1-2171 Call
Call or see our website for best price Call or see our website for best price
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 29
7.62x39mm 7.62x39mm
Semi-Auto Semi-Auto
I.O.I. I.O.I.
100% 100%
AKM247 American
Made!
New 7.62x39mm semi-auto AK style rifle, featuring a 16
AKM247C American
Made!
New 7.62x39mm semi-auto AK style rifle, featuring a 16
inch nitrided barrel with removable slant cut muzzle brake and inch nitrided barrel with removable slant cut muzzle brake and
bayonet lug, U.S. manufactured stamped receiver, black polymer bayonet lug, U.S. manufactured stamped receiver, laminated
stock, handguard and pistol grip. Includes one polymer 30 wood stock and handguard. Includes one polymer 30 round
round magazine, may or may not include cleaning rod. magazine, may or may not include cleaning rod.
7.62x39mm 7.62x39mm
Semi-Auto Semi-Auto
I.O.I. I.O.I.
100% 100%
AKM247T American
Made!
New 7.62x39mm semi-auto AK style rifle, featuring a 16 inch
AKM247-UF American
Made!
New 7.62x39mm semi-auto AK style rifle, featuring a 16 inch nitrid-
nitrided barrel with phantom flash hider and bayonet lug, U.S. man- ed barrel with removable slant cut muzzle brake and bayonet lug, U.S.
ufactured stamped receiver with side rail scope mount, underfolding manufactured stamped receiver, black polymer pistol grip, underfolding
stock, black synthetic RPK pattern "Club Foot" stock, aluminum stock that stows away under the lower handguard. Includes one poly-
quad picatinny rail forend, and a black synthetic pistol grip. Includes mer 30 round mag, may or may not include cleaning rod.
two polymer 30 round mags, may or may not include cleaning rod. I.O.I. AKM247-UF with Polymer Handguard . . 1-2339 Call
I.O.I. AKM247T . . . . . . . . . . . . . . 1-2332 Call I.O.I. AKM247-UF With Wood Handguard. . . . . 1-2345 Call
Call or see our website for best price Call or see our website for best price
PAGE 30 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 31
PAGE 32 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 33
PAGE 34 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
• BCMGUNFIGHTER™
Stock $55.95
• BCMGUNFIGHTER™
Vertical Grip Mod 3 $18.95
• GEARWARD Ranger
Band 20-Pak $10.00 BCM® A2X Flash
• BCMGUNFIGHTER™ Suppressor $34.95
Grip Mod 0 $29.95
B5 Systems BCMGUNFIGHTER™
SOPMOD KeyMod 1-Inch
Bravo Stock Ring Light
$58.00
BCM® KMR-A Mount
KeyMod Free Float For 1” diameter
lights $39.95
Rail Handguards
Same as the fantastic original KMR Handguards
Blue Force Gear but machined from aircraft aluminum! BCMGUNFIGHTER™
VCAS Sling $45.00 BCM 9 Inch KMR-A9 . . . . . . . . . . . . . . . $176.95 KeyMod Modular
BCM 10 Inch KMR-A10 . . . . . . . . . . . . . $179.95
BCM 13 Inch KMR-A13 . . . . . . . . . . . . . $189.95 Scout Light Mount
BCM 15 Inch KMR-A15 . . . . . . . . . . . . . $199.95 For SureFire Scout
BCM PNT™ ®
Light $39.95
Trigger Assembly
Polished – Nickel – Teflon
BCMGUNFIGHTER™
$59.95 KeyMod Modular
PWS DI KeyMod Rail Handguard Light Mount
Free float KeyMod rail for AR15/M4 pattern rifles.
For 1913 mounted
PWS DI 12 Inch Rail . . . . . . . . . . . . . . . . $249.95
Wilson lights $39.95
PWS DI 15 Inch Rail . . . . . . . . . . . . . . . . $249.95
Combat
Tactical PWS KeyMod
Trigger Polymer Bipod
$269.95 Adapter $23.95
Arisaka Inline KeyMod
Inforce Scout Mount $34.00
WML-HSP Arisaka Ring KeyMod
$119.00 1” Light Mount $44.00
Daniel Defense SLiM Rail Handguard
Slim, Light, Modular KeyMod free float handguard. Thorntail KeyMod Offset
Trijicon DD SLiM Rail 12.0 . . . . . . . . . . . . . . . . . $265.00 Adaptive Light Mounts
DD SLiM Rail 15.0 . . . . . . . . . . . . . . . . . $265.00
TA31RCO-M4 Thorntail
1.030 Mount $70.00
ACOG 4x32 Daniel Defense Thorntail M3M6
$1,422.05 KeyMod Bipod 1913 Mount $50.00
Adapter
$47.00 Arson Machine Company KeyMod
Daniel Defense Light Mounts
Aimpoint PRO KeyMod 1 O’Clock Scout M600
Patrol Rifle Optic Offset Rail Assembly Mount $48.00
$424.00 $39.00 1” Ring Mount $44.00
All pricing is subject to change without notice. Please see our website for current pricing.
• GEARWARD Ranger
Band 20-Pak $10.00
BCMGUNFIGHTER™ Vltor
Comp Mod 0 - 556 Carbine
Threaded 1/2x28 for EMOD
5.56 AR15 platform Stock $119.65
$89.95
Polymer Rail, 5 Slot . . . . . . . . . . . . . . . . . $11.95 In Black, Flat Dark Earth, Foliage Green and Wolf Gray. Model 552
5.5 Inch Rail Panels, 5-Pack . . . . . . . . . . . . $9.95 $529.00
Aluminum Rail, 5 Slot . . . . . . . . . . . . . . . $28.95
All pricing is subject to change without notice. Please see our website for current pricing.
BCMGUNFIGHTER™ BCMGUNFIGHTER™
Vertical Grip Vertical Grip -Short
➤ Forward angle increases rigidity of the forearm, ➤ Low-profile length for increased mobility
provides more natural wrist angle and decreased “snag” factor
➤ Featuring an aggressive texture, and generous stor- ➤ Forward angle increases rigidity of the fore-
age volume arm, provides more natural wrist angle
➤ Cross bolt designed to work with improvised tools ➤ Aggressive texture, generous storage volume
➤ Reversible clamp for fastener setup on either side ➤ Made in the U.S.A. from high quality, impact
➤ Made in the U.S.A. from high quality, impact resis- resistant polymers
tant polymers ➤ Available in Black, Flat Dark Earth, Foliage
➤ Available in Black, Flat Dark Earth, Foliage Green Green and Wolf Gray
and Wolf Gray BCMGUNFIGHTER VG-S - Short, Screw Mount Version . . . $35.95
BCMGUNFIGHTER VG - Screw Mount . . . . $39.95 BCMGUNFIGHTER VG-S-KM - Short, KeyMod Version . . . . . $39.95
All pricing is subject to change without notice. Please see our website for current pricing.
1893 TURKISH CONTRACT MAUSERS 8MM ORIGINAL WWII BRITISH #9 BRITISH ENFIELD
303 BREN GUN MAGAZINES BAYONETS HARDWARE KIT
Excellent condition. Complete TOKAREV 9 MM
WITH CASE For item above.
only $279.88. Hand Select add $25. Bayonet with scabbard and frog. CONVERSION BARREL
Only
$68.00, Sling $9.95, cleaning rod $14.50, ammo pouch Grade #1.
with link. NEW. Only $58.88 $20.00
$9.50. Buy the whole shebang for $301.88.
12 magazines Yours
ANTIQUE PERUVIAN per case only
1891 MAUSER RIFLE “FIXER-UPPER only $59.95
Only $279.88 $169.95.
964 Donata
1298 Ensell Ct.
RD / Lake Zurich, IL 60047 / Tel: 847-550-8246 / Fax: 847-550-0654
Hours: 9:00 AM to 5:00 PM CST. Most orders shipped within 24 hours. Send certified check
or money order, add approximate shipping. All federal, state and local laws must be adhered to.
Illinois residents add 7.5%
7% sales tax. All prices and specifications are subject to change without notice.
We offer Law Enforcement and Military discounts! We set the standard our competitors will follow!
Add our Kit to your stripped lower receiver to complete your rifle.
COMPLETE KITS All kits are headspaced & test fired by current U.S. military contractors.
Mil-Spec Forged Flattop T-Marked Upper Mil-Spec Forged Flattop T-Marked Upper
Ltwt Bbl w/M4 Feed Ramps / A2 Flash Hider Barrel with M4 Feed Ramps / A2 Flash Hider Mil-Spec Forged Flattop T-Marked Upper
Mil-Spec Forged F-Marked FSB / A2 Sight Post Mil-Spec Forged F-Marked FSB / A2 Sight Post Barrel with M4 Feed Ramps / A2 Flash Hider
CAR Handguards w/Heatshield / Collapsible CAR Stock CAR Handguards w/Heatshield / Collapsible CAR Stock Picatinny Rail Gas Block Front Sight Base
5.56mm / 16 Inch Chrome-Moly 1:9 . . . . . . . . $500.00 5.56mm / 11.5 Inch Chrome-Moly 1:9 . . . . . . . $500.00 Aluminum Free Float Tube / Pistol Recoil Buffer
5.56mm / 16 Inch Chrome Lined 1:9 . . . . . . . . $545.00 5.56mm / 11.5 Inch Chrome Lined 1:9 . . . . . . $545.00 5.56mm / 7 or 11.5 Inch Chrome-Moly 1:9 . . . $575.00
5.56mm / 16 Inch Chrome Lined 1:7 . . . . . . . . $545.00 7.62x39 / 11.5 Inch Chrome Lined 1:10 . . . . . $595.00 5.56mm / 11.5 Inch Chrome Lined 1:9 . . . . . . $620.00
Includes Bolt Carrier Group and Charging Handle Assembly! No FFL Required!
COMPLETE UPPERS With complete barrel assembly, ejection port cover and forward assist, all fully assembled and headspaced.
CAR Uppers CAR Lightweight Uppers Mid-Length Uppers M4 Style Uppers
Mil-Spec Forged Flattop T-Marked Upper Receiver Mil-Spec Forged Flattop T-Marked Upper Receiver Mil-Spec Forged Flattop T-Marked Upper Receiver
Barrel with M4 Feed Ramps / A2 Flash Hider Mil-Spec Forged Flattop T-Marked Upper Receiver Barrel with M4 Feed Ramps / A2 Flash Hider M4 Barrel with M4 Feed Ramps / A2 Flash Hider
Mil-Spec Forged F-Marked FSB / A2 Sight Post Ltwt Barrel with M4 Feed Ramps / A2 Flash Hider Mil-Spec Forged F-Marked FSB / A2 Sight Post Mil-Spec Forged F-Marked FSB / A2 Sight Post
CAR Handguards with Heatshield Mil-Spec Forged F-Marked FSB / A2 Sight Post Mid-Length Handguards with Heatshield M4 Handguards with Heatshield
5.56mm / 16 Inch Chrome-Moly 1:9 . . . . $425.00 5.56mm / 16 Inch Chrome-Moly 1:9 . . . . $425.00 5.56mm / 14.5 or 16” Chrome-Moly 1:9 $445.00
CAR Handguards with Heatshield
5.56mm / 16 Inch Chrome Lined 1:9 . . . $470.00 5.56mm / 16 Inch Chrome Lined 1:9 . . . $470.00 5.56mm / 14.5 or 16” Chrome Lined 1:9 $490.00
5.56mm 16
300BLK / 16 Inch
Inch Stainless Steel
Chrome-Mol . . . .. .. $470.00
1:8 1:8 $475.00 5.56mm / 16 Inch Chrome-Moly 1:9 . . . . $425.00 5.56mm / 16 Inch Stainless Steel 1:8 . . $470.00 5.56mm / 14.5 or 16” Chrome Lined 1:7 $490.00
7.62x39 / 16 Inch Chrome Lined 1:10 . . $520.00 5.56mm / 16 Inch Chrome Lined 1:9 . . . $470.00 $525.00
9mm / 16 Inch Chrome-Moly 1:10 . . . . . $575.00 6.8 SPC / 16 Inch Chrome-Moly 1:10 . . . $495.00
5.45x39 / 16 Inch Chrome Lined 1:8 . . . $550.00 5.56mm / 16 Inch Chrome Lined 1:7 . . . $470.00 $725.00
458 SOCOM / 16” Chrome-Moly 1:14. . . $775.00 9mm / 16 Inch Chrome-Moly 1:10 . . . . . $545.00
$575.00
RRA 2
Stage
Promag CAA $120
Vert SVG
Grip Small
$15 $20
Troy Mid Rail DI 7
Magpul Magpul CAR
$140 Ambi Selector
CTR PRS Mil
$25
Mil/Com $245 - Spec
$80.00 - $270 $55
CAR Free Float Round Alum .... $50 CAA FVG (Folding) .................. $40
$125 Magpul
Daniel Defense CAR EZ Quad .. $150 CAA MVG ............................. $25
Enhanced
A2 Std GI Complete ............... $65 Daniel Defense Omega Rail ... $310 Daniel Defense ...................... $45
Guard
ACE Hammer Stock ............. $235 Double Star 2 pc Quad Rail ... $130 GPS 02 Grip Bipod ............... $105
$20
ACE M4 SOCOM Complete ... $185 Magpul MOE CAR .................. $30 Magpul AFG 1 or 2 ................ $35
ACE Skeleton 7.5 Complete....$115 Magpul MOE Mid ................... $35 Magpul MVG (MOE)................ $20 ACC-U-Wedge .......................... $3
ACE Skeleton 10.0 Complete ...$125 Magpul MOE Rifle .................. $40 Magpul RVG (Rail) .................. $25 AR15 LPK w/ Grip ................. $65
CAA (ACP) adj Cheek Piece ..... $30 Mid Free Float Round Alum ..... $55 SOG Graphite ........................ $35 LPK w/ RRA 2 Stage ........... $150
CAA (CBS) Complete Stock ... $110 STD Free Float Round Alum .... $60 Tangodown Battlegrip ............ $65 Magpul BAD Lever ................. $29
CAA Stock Rail Adaptor ......... $15 MI CAR MI17 2pc Quad ........ $130 Tangodown w/ Q.D ................ $90 Magpul Enhanced Triggerguard
Ergo/Falcon F93 Complete ... $160 MI CAR MI20 F.F. Quad ........ $140 Troy Modular ......................... $60 .......................................... $20
LMT M4 Complete ............... $120 Free Float ........................... $140 UTG Alum w/ 150 Lumen Light Magpul Moe Triggerguard ......... $9
LMT SOPMOD .......... $195 - $245 Surefire M85 ...................... $215 ............................................ $80 RRA Winter Trigger Guard ...... $15
M4 Butt Pad ......................... $10 Surefire M73 ...................... $210 UTG Alum ............................. $35 Troy Industries Bolt Assist ...... $25
M4 Mil Spec/Com Complete ... $75 Troy Car 2pc Quad DI 7" ........ $140 UTG Foldable ......................... $35
M4 Stock Saddle ................... $25 Troy Mid 2pc Quad DI 9" ....... $160 UTG STD ............................... $20 Detachable Front /
Magpul ACS Mil Spec/Comm Troy Rifle 2pc Quad DI 12" ......$175 Young MFG, Alum .................. $50 Rear Sights
Body only .......................... $130 Troy Bravo Rail
Complete .......................... $175 Car STRX-BR 7".2 ................. $170
Magpul MOE Mil Spec/Comm Slings & Adaptors
Mid STRX-BR 9" ................... $180
Body only ............................ $60 Rifle STRX-BR 13"................. $200
Complete .......................... $105 Troy Alpha Rail (no Sight)
Magpul UBR Car/Mid STRX-AL 7" or 9"..... $165
Body only .......................... $265 STRX-AL,11"or 13" ......... $180/195
Complete .......................... $280 STRX-AL 15" ........................ $205
Rock River Operator Complete Troy Alpha Rail (with Sight)
Collapsible or A2 ............... $125 Troy Battle Troy M4 or
STRX-AL 11" or 13"
Magpul STR Sight Rear HK style Front
......................... 265.00/280.00
Body only .......................... $100 $115 $100
Troy Charlie Rail for 16" M4 ...$245
Complete .......................... $145 Strike Urban Defender 1pt $25
YHM Diamond Quad Rail ....... $135
Troy Battle Ax CQB ....$130 - $175 YHM midlength $165 Rifle .... $185
Ambi Lock Plate Loop
Pistol Grips Charging Handles /
$10 RRA Tac or Dominator Handle
Bolt Carriers
$165
Condor Bungee 1pt ................ $30
Condor Bungee 2pt ................ $38 ARMS #40 Rear ...................$120
Daniel Defense 7101 .............. $65 ARMS #71 Front ................... $40
Daniel Defense rear QD .......... $50 ARMS #71 Rear .................... $55
GI A2 (Quick Adjust) ................$12 DPMS Fixed Rear ....................$75
GI STD Sling ............................ $6 GI Detachable Carry Handle .... $95
Hogue (overmolded) Magpul MIAD Magpul (RSA) ........................ $29 Diamond Head Flip up Rear ....$120
$20 $35 STD Charging Handle $20
Magpul (ASAP) ...................... $29 M&A fixed Front .................... $35
CAA Interchangable ............... $40 AR15 or M16 Carrier Group $125 Magpul MS2/MS3................. $50 M&A Flip Front ...................... $40
CAA Tactical G27 .................. $28 Midwest Ind #13 Loop Rear .... $35 Magpul MBUS front ............... $40
DPMS PSGI ........................... $35 AR15 Chrome Carrier Group ..$165 Midwest Ind #14 Sling Rear .... $35 Magpul Rear MBUS ............... $55
Ergo Sure Grip ...................... $25 Armament Dynamics Ambi ...... $85 Midwest Ind #8 QD Front ....... $35 MI A2 ERS ............................ $95
Ergo Suregrip Deluxe Palm Swell Bolt Assy MPI tested ............. $50 Midwest Ind #TS Loop Front ... $35 MI Same Plane Low Profile ....$120
.......................................... $55 LMT Enhanced Carrier Group .. $235 Midwest Ind. HD30 Rear ........ $40 RRA N.M. Carry Handle .........$185
GI A2...................................... $5 LMT Tactical C-handle ............ $55 QD Sling Swivel ......................$10 UTG Fixed Front..................... $30
Magpul Bolt/Firing Pin Core ....$12 PRI Big Latch (only) ................ $22 Troy Push Button 360 ........... $35 UTG Flip Front ....................... $35
Magpul MOE ......................... $20 PRI Gas Buster C-handle......... $85 Troy Ind. 1pt or 2pt ................ $40 UTG Flip Up or Fixed Rear ....... $35
Tangodown Battlegrip ............ $33 Rock River Ambi C-handle ....... $60 Troy Stock Ambi Sling............. $50 YHM 5015 Rear ...................$110
Troy...................................... $20 STD w/ Tactical Latch ............ $35 Viking Tactical MK1................ $35 YHM 9080 Rear .................... $90
UTG Combat Grip ................... $20 Tactical Latch (only) ................$15 Viking Tactical MK2 ............... $40 YHM 9584 GB Front .............. $70
UTG STD Grip .........................$15 Young MFG N.M. Carrier ...... $235 VTAC LUSA ........................... $50 YHM 9627 FA Front .............. $70
PAGE 40 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
ISSUE PISTOL HOLDER USMC COMBAT KNIFE & BAYONET Fits Russian Model 44. Canvas w/ leather loops.
New 2003 USMC combat knife & bayonet. 13" long without New ....................................................... $14.95 ea. CA406 M14 NYLON SLING OD Green. Looks similar to M1
Limited Qty. OD Cordura nylon. Can be sheath. 8" blade with throat serrations. Designed to fit M16/ Garand OD cotton sling with hook & compression lock for quick
changed to left or right hand draw. Mfd. by A2 rifle std. Marine Corp. issue. Color: earth brown. Comes ATTN. VFW, AMERICAN LEGION & OTHER adjusting. Currently issued for refurbished M14 rifles. Made by US
original government contractors for 1911A1 with plastic case. First quality in government packaging. ORGANIZATIONS THAT USE CEREMONIAL RIFLES govt. cont. Very ltd qty. New.......................... $14.95 ea. CA463
.45 Auto/Beretta 92 series and most other 5" Limited quantity due to war. Sale .$134.95 CHOKC6504 We are offering parade slings. Model 1907 style leather slings
large frame autos. While quantities last. for 1¼" swivel rifles. Leather is factory sealed for low to no ORIGINAL GI M1 GARAND SLING
New in govt. packaging ........................... $39.95 ea. MA225 U.S. NAVY SEAL KNIFE Newest govt. maintenance. Comes in These were used from late 50's to early 60's. Original
issue Navy Seal knife. Carbon steel blade. Handle is U.S. Navy brown, natural or unstained. issue in good condition. Type I is 1.25"x40" long. Type II
marked. Includes issue molded scabbard to be worn on belt. New................$27.90 ea. CA338 has a round indent on the compression fitting and is 2"
ENGLISH WEB WWII ERA Made by Ontario. New in box....$89.95 ea. CHOKC6141
longer. Type II ..................... $22.95 CHVM1GSL2U
PISTOL HOLSTERS AK47 SKS SLING This woven cotton sling is made
Type II British revolver holster w/ half GENUINE CURRENT ISSUE COMBAT KNIFE to attach to the AK47 or the SKS. Leather tags help keep the
TYPE Issued to Special Ops. forces, Marines & now the U.S. Army. sling secure. 48" Long x 1" Wide. Imported..... $9.95 CA391
LIMITED QUANTITY: M1 GARAND STYLE
moon flap and storage compartment for
cleaning rod in front of holster. Fits most II Heavy duty black leather sheath riveted & sewn. Knife has black OD GREEN COTTON WEB SLING with hook
revolvers —Webley, Enfield, .455, 1917 Colt or S&W .45
leather handle & dark parkerized blade. Made by Ontario. M27/M4M16 RIFLE SLING Just recieved, & thumb compression lock. Also correct for M14 type rifles. Mfd. by
New in pkg .....................................$49.95 ea. CHOKC8180 new type gas piston, M4 type, black cotton blend. 1.25" wide U.S. Contractor. Individually packaged in brown paper bag with tag.
revolvers. Also fits 6" barrel, .38 S&W with lanyard loop. x 60" long double adjustable, w/ metal tips & 3 metal retain- New ....................................................... $15.95 ea. CA444
Recently sold by SOG. Shows storage wear. Naval gray in ers. New ........................................14.95 CHM272P
color. In new condition ......................... $19.95 ea. MA273
HK TYPE WEST GERMAN ARMY M16A1 BLACK NYLON SLING
1911 A1 BROWN OR BLACK PLASTIC 45 ISSUE POCKET CLEANING KIT Sometimes called “Silent Sling.” Double adjustable with steel M1967 DAVIS STYLE OD PISTOL BELT
7.62x30 cal. OD green plastic, body curved to fit in buckles. New ........................................ $9.95 ea. CA447
AUTO GRIPS New U.S. Issue ............. $8.95 set CA423 the pocket of German battle dress pants. Complete
with black steel quick release. Medium size only. Fits up to 38"
waist. New...............................................$14.95 ea. DV1936
with oiler, brushes and 98 Mauser type bore chain. 303/L1A1 STYLE SLING OD green cotton with
M9 BAYONET Ontario Knife. Franklin Used – very good to excellent. Attn. Gunshops ................ black steel ends. New ........................................$13.95 ea.
Bill New York. OD Green. ..................10 for $40.00, 2 for $9.00 or $4.95 ea. HK30
NSN 1095-01-227-1739 Military Grade.
New in Package ......................... $139.95 ea. CHOKC6220 K98 MAUSER SLING Brown, unoiled leather pull- M16 4 MAG POUCH LC-2 M16 OD green
NEW GOVERNMENT ISSUE SURVIVAL KNIFE cordura water-proof nylon 30rd mag pouch.
thru stock with leather covered frog. Slide compression lock. Late
Original issue, not an import or after-market U.S. copy. Note: Holds 3 M14 20rd mags or similar type.
M3 COMBAT KNIFE WITH LEATHER production. New.................................. $18.95 ea. CA405
Made by Ontario. New ......$49.95 ea. CHOKC6150 New .................................. $12.95 ea. CA428
HANDLE & SHEATH Original Camillus tooling by
Ontario of NY. New in package ........ $69.95 ea. CHOKC8155 NEW GOVERNMENT ISSUE M1 CARBINE SLING & OILER SET
MODEL M1952 OD green cotton web sling with U.S. M16, 30RD, OD MAG POUCH Genuine G.I.
SURVIVAL KNIFE SHEATH ONLY 30rd mag pouch that’s seen action. Still in great shape at
M8A1 BAYONET SHEATH Original issue, new government issue sheath. Made by marked oiler. Sling & oiler U.S. Mfd. New......$11.95 set CA383
Government. issue. a great price! Used/good ................ $6.95 ea. MA142
Ontario for the 5" USAF Survival Knife. Includes sharp-
New in package...$18.95 ea. ening stone ......................... $29.99 CHOKC6150S M1 CARBINE OILER
Parkerized. Std. issue oiler. U.S. Marked. LEATHER CHEEKPIECE
RARE ORIGINAL 10" GARAND BAYONET AND SCABBARD New ........10 or less $5.95 ea., 10-50 $5.50 ea. CA384 M1 Garand or M14 lace-on MRT marked. Comes
with 2 brass screws & instructions. Brass screws not
RARE US Contract Made for the Greek Army. Condition—Good Used. Price .................................... $124.99 CHM1M7U
necessary to mount. Sale .......... $27.95 ea. C115
M1 CARBINE CLEANING ROD CANVAS
16" SHEATH ONLY For Model 1942 Bayonet. New reproduction..............$16.95 ea. CA278 CASE Genuine U.S. issue M1 carbine cleaning rod canvas case.
Has 3 slots and small patch pouch with belt hook attachment. OD GI TENT STAKES
M1 GARAND REPLACEMENT M7 10" BAYONET SHEATH Green. 12" x 3¼". New Old Stock. Please specify Vietnam or WWII Used - Orange 9" tent stakes for the GI
Scabbard/flaming ball..................................................................................$12.95 ea. CA267 Dated. Price ..........$14.95 WWII– MA306 VIETNAM– VM1C shelter half. Genuine Surplus ................. $4.95/4pk CTS9
S.A.W. AMMO BELT POUCH M14 NAVY ISSUE OD NYLON M14/E2 ORIGINAL BELT CARRYING GI SNAP LINK CARABINER
Heavy OD nylon constructed with velcro & DOUBLE MAG POUCH With divider CASE FOR CLEANING KIT OD Green vinyl for Original - GI Snap link carabiners. Great
snap closure. Approx 7"x8"x2½". Will hold curtain to prevent mags from touching. Has grenade M14’s, without storage compartment in buttstock. Carrying case for holding keys and gear. New with oxidation from age .
200rd plastic box or 7 30rd M16 mags. attachment on each side and support strap to attach only, no cleaning kit. Vietnam era. New........ $12.95 ea. MA297 ................................................................................. $9.95 SLC
New ....................................2/$30.00 or $15.95 ea. to suspenders. With Alice clip. New ...... $14.95 ea. CA441
CHARLEY’S EXCLUSIVE M1/M16 KOREAN OR VIETNAM ERA U.S. MODEL 1923/03 SPRINGFIELD DISMOUNTED U.S. MARKED
CARTRIDGE BELT 10 pocket. Pocket is divided by snap with strap to secure 5rd stripper
COMBO SLING This universal combo sling can be GI L-HANDLE CANTEEN CUPS clips. Will adjust from 30–48" fully adjusted. Painted brass lift-the-dot snaps. Originally, this belt was
used with a M1 Garand, M14, M16 and most AR rifles. Made GI USED canteen cups. Choose from 1950’s dated ordered for the U.S. marines who were engaged in Nicaragua & China, and were using up their leftover
from heavy duty black cotton canvas and has parkerized and Korean-era or 1960’s dated Vietnam-era. No choice for belts from WWI, such as Guadalcanal. Choose khaki or OD. New ...................................................... $34.95 ea. CA224
black coated parts. Made in the U.S.A. exact year. ....................................................$19.95
Price .............................................. $16.95 CHM1M16 KOREAN– CHKECC VIETNAM– CHVNECC
M14/M21 M-1A ACCESSORIES & PARTS
M14 nylon OD green sling, New .........$14.95 ea. CA463
AK47/74 MAG BELT POUCH OD cordura nylon. Alice keepers to go on belt & eyelet to attach to suspenders. M14 Navy issue OD double mag pouch with divider,
Made in the U.S. for foreign country. Holds 3 magazines. New ............................................................... $12.95 ea. CA452
New ....................................$14.95 ea. CA441
M14/E2 Belt Cleaning Kit pouch, VN era, OD green
ATTN WIVES, MOTHERS & CHILDREN OF A U.S. MARINE OR FORMER MARINE New .................................. $12.95 ea. MA297
We are offering original Ka-Bar full size combat knives as first issued in WWII. These are & are beautifully finished w/ leather handle & M14 buttstock cleaning kit
anodized black blade. Has USMC and Globe & Anchor. Comes New in Original Box ............................................... $84.99 CK1217 New ....................................$14.95 ea. CA437
www.charleyssurplus.com • 1-800-654-4795
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 41
www.charleyssurplus.com • 1-800-654-4795
PAGE 42 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
M16A2 STOCK SET M16A2 M203 MOUNTING KIT Phones Open: Mon - Fri,
W/ HANDGUARDS, HANDGUARD Original M203 Grenade
Launcher attachment kit
8:30am – 5:00pm A2
PISTOL GRIP AND SET COMPLETE contains 2 fiberglass barrel 50 Hilton Street, Easton PA 18042
Showroom Open:
Monday - Saturday,
BUFFER & SPRING WITH METAL shims, bracket and 2 screws.
NEW! 610.250.3960 Fax: 610.438.2548 10:00am – 5:00pm,
Used in Very Good shape. ITEM
$66.45 NEW! LINER NEW! Very limited ........ $40.00 M203005 www.e-sarcoinc.com Friday til 8:00pm
AR315 ITEM M ITE $16.10 AR184
M203 GRENADE LAUNCHER FIBERGLASS Manufacturers…..
CHECK OUR AR PRICES !!
Sarco has contracted thousands of reproduction
INSULATORS Half-moon insulators for use NEW line items in metal, wood, leather & canvas prod- LOWEST IN THE GAME !
in mounting the M203 Grenade Launcher ITEM! ucts from different vendors. We would be pleased IF NOT, LET US KNOW.
on the M16 rifle. Hard to find, we have to hear from new Manufacturing vendors who can
found a handful deep in the warehouse.
ALL TOP QUALITY GOODS.
offer their services. Contact Mark or Dave. Email
Pair of M203 Insulators............$14.95 at mdotten@sarcoinc.com or mgdave@sarcoinc.com LOTS OF U.S. MADE GOODS.
$326.68
tactical extremes. Made of the best materials and perhaps the sleekest design
...................... $359.95 $379.95 $389.00 AR224 around with a Keymod handguard with an octagonal O.D. that is only 1.75
inches . Barrel is Nitride coated with a 1 in 8 twist. Entire upper assy. w/o bolt
& carrier weighs in at 3.35 lbs.................$295.00 AR429
XM177 FLASH HIDER - Made with the traditional weld on the outside, new For more information, please check our web site
(Not a suppressor, so no NFA) ........................................................... $59.95 AR439 E-sarcoinc.com under category ‘CBC AR15 Upper Assemblies’.
AR15 PISTOL CONVERSION, 9MM UPPER BARRELED RECEIVER SET AR /M16 ARMORER'S KIT
Complete upper flat top Be ready
when the time
SALE SALE SALE SALE
receiver
comes! Qual- M4 16" COMPLETE BARRELED FLAT TOP UPPER ASSEMBLIES
w/bolt assy,
ity tool set We have done the hard work for you. These are fully assembled
mag block & 20rd 9mm for removal
magazine ready to add
upper halves complete and ready to drop on to your complete
& installa- lower. All parts made in the U.S.A.! Includes Flat Top Upper, bar-
to your lower receiver. tion of parts.
This is for making the Easily worth
rel assembly, complete bolt and carrier assembly, charging han-
AR pistol and it’s a hot commodity on the cost just for the quality vise block dle assembly, forward assist and ejection port cover assembly
the AR circuit. Very limited number in stock. set! INCLUDES - VISE BLOCK, DELTA .................................................................. $319.00 AR013
All NFA rules apply ......................................................................................$595.00 AR421 WRENCH, TOOL BRUSH, GI COMBO Add ons: Kit with carry handle, rear sight assembly
(See our conversion set on page B) *In areas with restricted magazine capacity, we can sell you the kit TOOL, BROKEN SHELL EXTRAC- .................................................................. $349.00 AR014
and deduct $15.00 for the magazine. TOR, BORE & CHAMBER BRUSHES, Add ons: Lower parts kit and collapsible stock and carry
1 SIGHT TOOL, CLEANING ROD SET
$91.50 value for just ... $59.95 AR373
handle ........................................................ $399.00 AR117
9MM AR-15 CONVERSION SET
Consists of a complete upper flat top barreled Comes w/ bolt & carrier assembly
receiver with a rail gas block in place of the AR15/M16 UPPER RECEIVER VICE BLOCKS
To securely hold your upper firmly without
front sight, custom flash hider, mag well adapt- damage to the upper or the barrel on barrel
er and 30 rd. magazine. (Deduct $15 from kit if installation. Will work on any AR upper
you live in a state where you cannot have the magazine). Flash hider is permanently attached (receiver not included
to the barrel. Made in the USA......$595.00 AR395 (See Hi Cap Mag restrictions on page O) ........................................ $29.95 AR-VICE
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 43
B2 See our bayonet page G AR15 AND M16 ORIGINAL EARLY M16 LSA BY THE QUART...AT A
for M16 (M7) bayonets
50 Hilton Street, Easton PA 18042
PARTS AND ‘PROJECT STOCK SET’ SUPER PRICE!
For 5 decades LSA has proven
610.250.3960 Fax: 610.438.2548 SPECIAL SALE ON
UPPERS! BEST PRICE EVER!
ACCESSORIES We used to restore these, but currently have no
time. Stocks will have a line crack up front where
itself to be a first class firearms
lubricant and it is still used for
www.e-sarcoinc.com it connects to the receiver and the triangular
the ‘Big Guns’ in our land an na-
AR ‘DROP DOWN’ TRIGGER GUARD KIT
WE GOT A GOOD BUY!!
AR15 COMPLETE BOLT handguards are missing 1 or 2 ‘teeth’. They have
the expected wear & tear of service. You can val forces. It is a semi-fluid lubricant pro-
Afford yourself a AR FLAT TOP M4 UPPERS ASSEMBLY – rebuild these and reap the profit! We last sold sets viding oxidation and corrosion resistance
little extra room NEW at @$59.95. Grab these while you can because LSA is a great choice for M60, 1919A4, &
ITEM! they’re the last of 20,000 lbs of M16 furniture that
in the trigger M2 machine guns where friction is more
area, especially SUPER SALE!!! we bought after the Vietnam War. severe. Whether you’re shooting the AR15,
when using gloves. Attaches Best deal around! Bolt with all M16 ‘Project Stock Set’ AR442 Model 1911, or the MK46 mod O, LSA still
easily with 3 screws and 1 Set ............................... $19.95
comes with hex key. Alumi- associated parts. Reg. $75.00 NEW! performs spectacularly well and is a frac-
num .............................................. $9.95 AR437 Many choices to suit your needs. SARCO SALE! ..... $39.95 AR062
10 sets for .............$18.95 each
ITEM tion of the cost of CLP!
25 sets for .............$14.95 each
A: Stripped flat top upper $48.95 AR196 100 sets for............$11.95 each
.............................$9.95/quart OIL006
COMPLETE M4/AR15 16" BARREL B: Stripped Flat Top Upper with our com-
Complete 16 inch .223 plete A-4 carrying handle assy. (includes
COMPLETE AR BOLT
SA
LE
‘Wylde’ barrel with 1 in 9
complete A2 rear sight assy)
twist. Ready for installa-
LE
.......................................$69.95 AR202
SA
tion.............................................. $125.00 AR426
C: Stripped flat top upper with M4 carry
CARRIER ASSEMBLED
!
handle assy and also ejection port cover
M16 AUTO SEAR assy and forward assist assy.
Orig U.S. G.I. exc cond. Few only
........................................ $89.95 AR204
FULL-AUTO (good for semi-auto)
.......................................$19.95 AR095 M16 ACCESSORY KIT - HEAVY DUTY
Buy a replacement(s) for your legal M16.
All NFA rules apply.
AR-15 / M4 16 INCH
Cleaning toothbrush (GI)
Silent sling, Front sight tool
Muzzle cover, Magazine dust covers (6)
NEW!
ITEM
U.S. MADE!
Note: These go out of time with use. Combo wrench, Plastic mag carriers (4)
NEW
K2 M14 PARTS U.S. M82 SNIPER RIFLE ‘BUILD’ KIT ITEM!
M1
Meticulously manufactured M82 GARAND
610.250.3960 Fax: 610.438.2548
www.e-sarcoinc.com & ACCESSORIES , 2.5 power scope is the perfect
and accurate scope for creat-
RIFLE PARTS &
ing Garand M1D or M1C Sniper ACCESSORIES
With our M14 kit, you can (More on page D!)
build your own gun at a Rifles or the Springfield
fraction of the price and with 1903A4 sniper rifle.
U.S. manufactured parts! Newly manufactured BRAND NEW M1
Our kit includes an M14 all with precise fitting and
steel Bula forged receiver polished optics, stadia GARAND BARRELS
from a leading U.S. manufac- post reticle, sliding Currently produced in USA by a
turer, new U.S. Bolt w/roller, shade and rubber eye
30 Year Top Line Barrel MFG
like new U.S.G.I. Operating cup, with an overall .30-06 and .308 caliber
Rod, U.S. G.I. handguard, blued finish. Marked with original govt. part numbers. Clinically zeroed at the barrels in stock !
new U.S. made barrel and factory to perform at 300 yds. The scope comes with a brand new M1D scope Newly manufactured barrels ready to
flash hider with bayonet mount, M1 D barrel, M1D handguard, flash hider and leather cheek pad. install on your M1 Garand Receiver.
lug. U.S. made, not Chinese Perfect kit to ‘trick out’ your venerable Garand and snipe like a pro! Made by one of the premier barrel
imports! A $1,257.00 Value. .......................................................... $495.00, 3 for $1449.95 GRD365 manufacturers in the USA, these .30-
Sarco price is 06 caliber barrels and .308 barrels
.......................................................................... $995.00 GUN707 (FFL required) We still have a few ORIGINAL WW2 ERA GARAND STOCKS W/ MARKINGS. are manufactured from 4140 steel
WE CAN ALSO OFFER the same kit with a Fulton Arms receiver! See our website! with 4 groove rifling and a 1 in 10
.......................................................................... $945.00 GUN715 (FFL required) twist. Beautiful high quality parker-
See Issue #21 or our website for gun ordering instructions COMPLETE SET OF M1 GARAND STOCK HARDWARE ized replacement barrels. Because
WE CAN ALSO OFFER the same kit without a receiver! All cleaned up and reparkerized. Buttplate w/screws, rear swivel, stock ferrule they are made here in the US, they
.....................................................................$475.00 M14359 (NO FFL required) & swivel assy ......................................................................... $39.95 GRD136 do not have the ungainly import
Hardware Set same as above but Not reparkerized ................. $33.50 GRD213 barrel markings. A great chance to
M14 U.S. G.I. BIRCH STOCKS M14 FLASH HIDER PLIERS get rid of that ‘Blue Sky’ or other
NATIONAL MATCH
Wood work is completely done and the stock is
Available once again. New condition. M1 GARAND BUTTSTOCKS import marked barrel and also restore
accuracy! Barrels should always be
A necessity for your M14 ensemble These are original U.S./G.I. walnut stocks, some in especially choice condition. Several grades avail-
ready for inserting the barreled action. These able (these are the wood butt stocks only, no handguards or metal included). installed by a qualified gunsmith.
stocks are made for the rear lug style of receiver $16.50 ea. TOOL039 GRD024 Select stock - has seen some use, but no abuse. Original finish, no cracks, nice walnut, much .30-06................ $149.95 GRD157
and although completely machined, these stocks better than average stocks .................................................................................................. $110.00 .308 ................... $149.95 GRD158
are unstained and allow you to add the ‘finish’
you really want! We only have about a half dozen
M14 ORIG G.I. FLASH HIDERS M1C/M1D Sniper Stocks, We found a small lot of sniper stocks mixed in with the excellent condition
Mix or Match 3/ $429.95 GRD337
reworked stocks described above. These sniper stocks have two small screw holes in the bottom of the
remaining .................$99.00 $125.00 M14001 Found a few only!...$74.95 M14157 Please specify when ordering
stock where the sniper cheek pad would have been attached.
GRD026 These stocks are not marked. The cheek pads are not on these stocks, just the holes are
NEW M14 FLASH HIDERS W/BAYO LUG present....................................................................................................................... $145.00
ITEM! In stock again! New Production ZZ2 Same stock with open box/SA inspectors mark ........................................................... $225.00
GRD027 Average condition - G.I. butt stock, no cracks, might have minor chips on edges .......$75.00
$29.50 M14079 M1C/M1D stock as above with arsenal repair, no markings ...................................................$89.50
Note: See our 1st of the month EMCF stock ................................................................................................................$350.00 & up
ad or our E-com site for M-14 GAW stock ..................................................................................................................$350.00 & up
NEW!!! M14 BARRELS NEW HRA stock...................................................................................................................$225.00 & up US Made by old
Magazines. ITEM!
IN STOCK Original .308 (7.62 NATO) Garand stock, new G.I...................................................................$59.95 school barrel maker
Brand new .308 cal M14 Barrels
ORIGINAL G.I. TRW M14 RECOIL SPRINGS
Also work of course in all semi autos.
made by one of the best U.S. barrel
manufacturers $175.00 ea. M14124
M1 GARAND ORIGINAL G.I. PROJECT BARRELS
Just in the door.......................$7.45, Original M1 Garand barrels with very good or better bores, but with blemishes and
5/ ......................................... $29.95,
10/ ........................... $49.95 M14052
tack weld marks on the outside shoulder where they were removed from drill rifles. The
M14 7.62 NATO CHAMBER BRUSHES chamber mouth of barrel and threads/shoulders are good. Barrels are post war dated.
G.I. ratchet chamber
NM SIGHT & APERTURE BUYERS PLEASE NOTE: With some work, they can be restored. Muzzle threads are fine as is the muzzle end key
brush originally made
The aperture is made oversized to be fit to your sight
for use with the M14 way and threading. Sold indi-
base. The procedure is simple & instructions are in- NEW
cluded. See our website for the instructions if you wish. rifle, but will work just as well in most 7.62mm vidually as long as supplies last ITEM
NATO rifles, new ................................. $2.95 !
National Match Rear Sight Aperature ...................... $69.95 GRD353
Your choice of .052 or or 3 for .................................. $6.95 M14016
.059 diameter A $942.00 We have M1 GARAND .30-0 6 KITS &
$39.95 M14127 M14 RUBBER BUTTPLATE M1D GARAND SNIPER RIFLE KIT Value ! 7.62 NATO (.308) M1 GARAND KITS
A REALIZED DREAM FOR SARCO &
REPLACEMENT OUR VALUED CUSTOMERS! Convert ~ SEE OUR WEBSITE ~
7.62MM BROKEN SHELL EXTRACTOR your M1 Garand into a military
$5.95 BSE002 Most of us don’t use the flip
up buttplate issued with the
grade M1D Sniper Rifle or build M1D BARREL WITH MOUNTED
your own M1D with our M1D Ga-
M14/M1A SIGHT rifle. Here is a ‘simple to use’ rand kit which includes a new M1D SCOPE BLOCK
and more comfortable alter- Barrel with mounted scope Block, Just in, new M1D Garand barrel
PROTECTORS U.S. Army
Design
native. Half the weight of the Scope ring mount, T37 flash hider, ready to install and mount your
Military style plastic snap-on issue steel buttplate assy.! M84 scope with rubber eye piece, scope. U.S. Mfg!
covers to protect the front and rear sights ................. $12.95 M14357 Handguard, and leather Cheek-
Complete kit at an unbelievable price! ......................... $249.00 GRD159
and the flash hider muzzle of the M14/M1A piece. Everything you need, to make
rifle. New. $6.50, 3 for $17.95 M14022 the sniper rifle you’ve always wanted.
M14 WOOD HANDGUARD We also include an original M84 data
M14 RIFLE CLEANING KIT Our walnut M14 handguard has been plate for the scope. Bound to satisfy
out of stock for years! Get yours now you on the range and increase the LATE T-37 M1 GARAND SNIPER
Kit consists of following items: U.S. MADE BARREL!
G.I. sectional for only .................. $24.95 M14120 value of your rifle too! These parts are FLASH HIDER
normally quite expensive on their own! Barrels are short chambered as per military $34.50 GRD111
cleaning rod,Rod handle/
specs, so make sure a Gunsmith checks the final assembly. Very limited quantity in
combination tool
stock now .................................................................................... $599.95 GRD335
Ratchet chamber
brush, .30 cal. bore brush
M1923 (WWII Style) U.S.
G.I. carrying pouch $12.50
3 for $29.95 CLN070
NEW G.I. SPEC M14 & M14A M1 GARAND ACCESSORY PACK NEW!
ITEM CARTRIDGE
BOLTS WITH ROLLER Terrific set of accessories for
BELTS
These are New production Rockola the Shooter or Reenactor!
M14 STRIPPER CLIPS forged bolts to original GI blueprint Made up of both original and for M1 Garand
7 original clips for $9.95 STC016
and heat treat. 8620 H Steel/#719-0185 GI print.
reproduction items, the Pack .................................. $19.95 ea.
Heat treat spec A-Z-2M47512. Fully Military com-
pliant part check the TALK boards....$175.00 includes the following items: 3 for .................... $54.95 GRD125
M14155 (ORDER EARLY THESE WILL FLY OUT)
M14 G.I. OP RODS GARAND GUN CASE, GA-
Reparked, exc condition. RAND CARTRIDGE BELT, MI GARAND CLEANING KIT
$175.00 ea M14053 AVAILABLE AGAIN M14 MILITARY MANUAL, M10
SALE!!
CLEANING SET w/brush,
FULL AUTO PARTS KITS CHAMBER BRUSH, SNIPER
Kit contains M10 cleaning
M14 SPECIAL ITEMS CHEEK PAD, 1 QUART OF
rod, bore brush and a G.I.
carrying pouch. CLN064
1. G.I. M14 connector rod.... $19.95 M14049 LSA - MILITARY GUN LUBRICANT, CLEANING ROD STOP, USGI DUMMY .30 RD, 3
............................................... 3/$49.95 $14.95 $17.49
EN-BLOC STRIPPER CLIPS, M15 G.L. SGT.CASE, PULL THRU ROD & CORD
2. G.I. front stock swivel set, new M14 Selector, Pin & Spring 3 for $39.95 $49.50
ALSO: Your choice of 1907 Leather Sling or Canvas WW2 style sling. Specify when
.......................................... $8.95 M14117 M14 Selector Shaft Handle for M10 cleaning Rod for
3. National Match front swivel .......... $23.75 M14 Sear Release ordering. A Retail Value of over $145.00 For Just..........................$79.95 GRD329
Garand Rifle – hard to find
4. M14 bolt with roller, new...$175.00 M14155 M14 Connector Rod Full Auto ***A great gift for a Garand owner!***
$4.95 $7.95,
5. M14 op rod spring guide ..... $19.95 M14358 M14 Selector Lock ..............$39.95 M14014
3 for $14.00 $22.50 CLN047
6. Walnut M14 handguard ...... $24.95 M14120 FOUND A FEW MORE M1C SNIPER ORIG WWII G.I. M1 NEW ITEM!! M1D Orig G.I. M10 handles $6.95 $9.95
7. G.I. Fiberglass M14 handguard WORLD WAR I & WORLD WAR II RIFLE GRIFFIN & HOWE NEW GARAND KHAKI BARREL BLOCK GRD281
..............................................$7.50 M14005 PATTERN MOUNT BASES ITEM!
CLEANING ROD
8. M14 Buttplate assy hinged, G.I. PATTERN U.S. LEATHER RIFLE SLINGS (the base for the
Parkerized – Com- POUCH barrel) fully ma-
........................................... $29.95 M14047
plete with the 3 chined from solid GARAND BROKEN SHELL EXTRACTORS
9. M14 Bolt stop G.I ................ $22.95 M14091 New cond. Few only
screws & 2 pins for billet – 100% Dual use for .308 (7.62x51) and .30-06
WWII markings.
1. WWI Model 1907 Sling (w/brass hardware and
mounting ........... $69.95 GRD285 Found in
like the original and to the .................................... $5.95 BSE013
CHECK OUR WEBSITE FOR A WWI date) ............................................ SLNG024 G.I print $89.95 GRD316
2. WWII Model 1907 Sling (w/steel hardware and We also have the pin & screw set for warehouse Investment cast M1D barrel
FULL LISTING OF M14 & M1 WWII date) SLNG025 ............................$24.95 GRD372 $14.95 GRD299 LATE PLASTIC WWII OILER --G.I. NEW
block $59.95 GRD113
GARAND PARTS & ACCESSORIES! ............................ $16.95 ea., 3 for $47.95 Few Only $13.95 OIL035
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 45
!!! GOOD NEWS !!! THE SHIPMENT IS IN!!! 1911 SLIDES SHOULD BE IN BY THE www.e-sarcoinc.com
THERE ARE 1911 GI TYPE BARRELS, GI KITS & COMMERCIAL KITS! TIME THIS AD COMES OUT 610.250.3960 E2
STILL LOWER PRICES ON ALL .45 AUTO KITS .45 AUTO “BUILDERS KITS” CLOSEOUT FOR 1911 .45
Put together your own .45 “Government” pistol with our Builder Kits. Several different kits available to best fit your needs. Our parts are stan-
dard M1911A1/ Pre-’70 Government type. Compare our prices and see how much you will save compared to the competition! BUILDER OR ENTREPRENEUR
We have a quantity of 1911 parts left over
*** Please Note – We are expecting slides by the time this ad comes out! *** from a buyout we did and we don’t have
Get in line for the 1st order to be shipped! time to deal with them.
OUTSTANDING ASSORTMENT OF QUALITY 1911 BARRELS COMPLETE 1911 .45 SLIDE KIT (All Parts For Slide)
SERIOUS ABOUT COMBAT A complete set of the top half of a .45 Government model. Kit includes one of our new
SHOOTING? ROTO 4M ROTO 4M HAMMER FORGED .45 ACP, 9MM & .38 SUPER current manufacture slides (unmarked), barrel, firing pin, recoil spring parts, sights,
Built to precise tolerance by a special hammer forging process, these barrels are the extractor, link & pin, band bushng. Over $198.00 worth of parts for only
COMPENSATED BARREL best you can buy! The hammer forging forms the barrel around a precision mandrel
DOD contractors have been ........................................................................................................$174.50 C45092
and holds the tolerance to .0001". This is much better than the typical broached barrels
buying up our Roto 4M found elsewhere Note: 5" & 6" .45 barrels are L.H. twist – all others are R.H. twisted Complete upper commercial slide kit for .....................................$184.95 C45200
barrels because they work! Our commercial slide set also available with one of our compensated barrel assy.
COMPARE THE ROTO-4M BARREL FOR ROUNDNESS AGAINST A STANDARD
MODEL 1911 COMPENSATED for .................................................................................................... $229.95 C45093
BROACHED BARREL FROM A WELL KNOWN MANUFACTURER. ALL ROTO-4M
BARRELS in 2 calibers will
BARRELS ARE MADE IN THE USA. Brand new extra length barrels for all Colt/1911/
reduce recoil and speed your
target acquisition especially during multiple
Government Model type automatic pistols. These barrels are made by the Special Roto- .45 SLIDE CASTINGS Sizes 3" to 5" Colt 1911/1911A1 .45 ACP...See Our Website!!
shots. Takes a minute to install our barrel 4M Hammer forge process which produces the most precise and consistent barrels for the best accuracy.
that comes with Barrel Bushing and perma- Minor hand fitting may be necessary for some guns. Barrels do not include link & pin. Link & pin avail- THREADED 1911 BARRELS
nently attached and ported Compensator. able w/barrel purchase for additional $5.00 C45281 Available in: 5-1/2 Inch. Brand new black oxide finished barrels in 3 calibers.
Thread is standard .578x28 TPI.
Also there is less weight on the muzzle end .400 Corbon Barrels .45 ACP .38 SUPER 9MM LUGER 9mm Model 1911 5-1/2" barrel .................................................................................... $60.00 C45360
than with conventional screw on muzzle 41/4" Commander 41/4" Comm
compensators. Most people comment on 41/4" Comm$52.70 C45010 5" ....$52.70 C45017 .38 Super Model 1911 5-1/2” barrel ............................................................................ $60.00 C45361
$54.70 C45105 $54.70 C45163 5"
the change of performance, but also that 5" ........ $52.70 C45011 6" ....$59.70 C45009 .400 Corbon Model 1911 5-1/2" barrel ........................................................................ $60.00 C45362
6" $54.70 C45019 6"
it looks great too! Sold elsewhere for $175- 6" ........ $60.70 C45013 7" ....$63.70 C45018 .45 ACP model 1911, 5.5" barrel ...................................................................................$65.00 C45321
$59.70 C45104 $59.70 C45020 7"
$200, Sarco’s price is ...................$99.95 7" ........ $61.70 C45014 41/4" Comm THREADED PROTECTION CAP FOR THREADED BARRELS
STD 5" $63.70 C45021
Specify caliber when ordering: New, made 16" ...... $80.50 C45016 ....$52.70 C45164 Barrels with .578x28 threads per inch ......................................................................... $13.00 C45363
$54.70 C45025 Side Note: Threaded protection caps for threaded barrels are used to protect barrel threads when not
in USA. .38 cal C45024, .45 cal C45015, .400
.40 S&W 1911 5" barrel C45277 $54.70 Note: 9mm & .38’s will not fit the .45 slide using a suppressor or muzzle break.
corbon C45194
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 47
HIGH QUALITY 10 ROUND .45 1911 MAG STAINLESS STEEL 1911 PARTS
F2 MODEL 1911 BLACK NICKEL FINISH .45 .45 single stack magazines for 1911 Colt Special
............................................................ $19.95 ea,
C45038 Recoil spring guide (matt
finish) Commander ......$3.50
www.e-sarcoinc.com MAGAZINE 3 for ............................................. $49.95 RPM127
C45150 Reverse recoil spring plug
FRONT TACTICAL COMBAT SIGHT ...................................$6.95
1911 PISTOL PARTS 7rd. magazine with ‘Black Nickel
Finish’ looks amazing without be- FOR 1911 FOR DOVETAIL SLIDE
C45312 Hammer pin ................$2.00
170" height .135 blade width. For standard ¼" C45313 Mag catch lock ............$3.00
8 ROUND .45 MAGAZINE ing above the ‘radar’. Super high dovetail red highlight on back. SARCO PRICE $4.95, C45314 Mainspring Housing pin
New, blued steel magazine end finish makes this magazine 3 for $9.95 C45140 (Comparable price $19.95) ...................................$2.00
for all .45 ACP Government sleek and low profile as it reflects
Model/M1911 type pistols.
PARA ORDNANCE EXTRACTOR SLEEVE BRONZE .45 CAL. CLEANING BRUSHES
Base plate also acts as finger rest to improve items around it with a soft glow. 5 for $4.85 C45098
your grip on the gun. .... $16.95 ea. RPM122 The finish is an extremely smooth, Troublesome
PXT extrac-
almost slippery feel which en-
tors (Power
.45 1911 SKELETON HAMMERS
Available again and at a special price -
hances loading and release of the
NEW VARIATIONS OF OUR NEW! extractors), Others get $50 to $75 for these. Could
magazine. This is the same finish
1911 .45 ACP MAGS - ITEM can be easily require very minor fitting to some grip
safeties due to the varia-
used by Maserati and Breitling for replaced with
NEW tions in manufacture of grip
JUST IN THE DOOR many of their precision parts. The this Para Ordnance extractor sleeve
which can easily be installed in minutes
ITEM! safeties.Our Price $14.95,
finish provides an extremely low coefficient of friction. The process of 3 for $36.95 C45256
Stainless steel
with ‘Locktite’ allowing you to use stan-
magazines applying the finish is the addition of copper over the steel, addition of
dard 1911 style extractors! Designed for 1911 combat sight set millet rear
$10.95, chromium, and then final coat of black nickel. Chromium adds to the use in series 70 slides and easily modi- sight plus (tactical) wide blade
3 for cost, but improves durability & appearance. fied to work in series 80 slides. Sleeve front with 2 lego type attach-
$29.95 RPM121 ........................................................................... $14.95 ea. RPM324 only ............................ $9.95 PARA308 ing studs. Red highlights on
blade. Retail value $62.00. Sarco Special
$19.95/set, 3 sets for $42.50 C45177
A NEW WORLD OF 1911 .45 AUTO MAGS 1911 7RD .45 MAGAZINE, US GI COLT 1911 STEEL MAINSPRING
SARCO HAS GONE TO EXTENSIVE LENGTHS TO
DEVELOP A SUPERIOR 1911 .45 MAGAZINE ORIGINAL 1911 MAGAZINES HOUSING w/LANYARD LOOP MILLET MARK I
NOTE! AT LEAST In very good condition released from the Housing is grooved for a sure
We have sold probably 150,000 of our price busters, but we decided Combat High Profile Rear White
military decades ago. We purchased these grip 1911A style - nicely blued
we need a new & better 1911 mag & we are very pleased with our new $1 UNDER ANY Outline Sights Fits Colt 1911
COMPETITOR long ago and lost track of them. Steel $16.50, 3 for $47.50 C45171
program. This is is the results of over a year of product development.
magazines are standard 7 rd, .45 caliber dovetail. White outline gives clear sight
Plus with all of the above a killer price - THIS MONTH ONLY! $7.95 $8.95, 10 for $69.95 ..................................$14.95 C45369 For Colt mfg revolver barrels, picture. Retail value $22.75. C45131
$74.95 C45298 This is half the price of most reasonable .45 mags! OEM or Large Quantity Buyers
Contact Cholly or Dave at (610) 250-3960 ext. 223. Check our website for additional info & pictures see our website. Sarco Special $9.95, 3 for $24.95
of our fabulous tooling. 1911 PISTOL TRIGGER BOWS
Our latest find ! We have a 1911 GENERAL OFFICERS BELT SET Just in the door! NEW
bunch of 1911 Trigger Bows .40 S&W, 9MM & .38 SUPER ITEM!
SARCO SPECIAL that we won’t use because they
are a little different than our current
WW2 era senior field
grade officer set of
leather belt w/ U.S.
FIRING PINS – Now available
for 1911 pistols ........................ $5.95,
WORLD WAR I PATTERN .45 1911 MAGS WITH LANYARD LOOP production. These are perfect for NEW
C45295 - 1911 mag with lanyard loop ...................... $13.95 making a 1911 trigger to your own ITEM! embossed brass buck- 3 for .............................14.95 C45301
Buy 3 mags for $36.95 and get a free pistol lanyard for the ‘dream configuration’, or for replacing le, double magazine Will fit both 70 Series and Series 80 pistols
mags. your current bow if needed…Or keep a spare for pouch, pistol lanyard,
These are rarely seen now a days. Best way to participate in fast the future. We could ask $10. Each for these, but and Model 1911 hip holster. Well made and .45 BARREL BUSHING WRENCH
combat shooting where you must drop and load mags quickly. letting them go at ............................$4.95 each rugged to the task! Very limited supply
Avoids damage to your dropped magazines. WWI Cavalry and or 3 for ..................................... $12.95 C45338 $2.95 Free Bonus
...........................................$58.00 HOL060
vehicle crews would keep 2 or 3 mags on a lanyard for combat purposes! – Other end is an
Original mags came with hemp twine so you could tie them to the lanyards M16 shorty buttstock
individually. These magazines are made on the same automated machinery
WIDE BEAUTIFUL GRIP SAFETY FOR installation wrench TOOL031
as our famous magazines shown above. This is the mag to have if you want to
be serious about CQB firing and reloading quickly. Very popular for modern
1911 .45 AUTO MODEL 1911, 9MM
Stop the pinch in the web of your FULL PIN SET for Colt .45 Auto.
combat pistol tournaments.
SPECIAL OFFER! 2 lanyard loop mags w/lanyard and U.S. military
hand (I used to get bloody) $16.50,
3 for $49.95 C45079 (Note: These
UPPER PARTS SET ! All seven pins for the M1911. NEW!
Finally In!! A great set of parts to help you New $4.85/ set, ITEM
double mag pouch .........................................$26.50 C45318 are for short rear tang frame. You can
fit them to Std. frame)
complete a 9mm version of the venerable Mod- 10 sets for $38.50,
el 1911 pistol. All parts are quality machined
100 sets for $285.00 C45195
parts including a 10rd. 9mm magazine, both
LE4010 #4 Enfield striker (firing pin) new original Outstanding detailed steel reproduction telescope used on specifically made to drop the 10/22® rifle into without any alteration!
factory......................................... $17.50 the Lee Enfield sniper rifle. Ruggedly built , it has a slid- That’s right! No alterations! The front sling swivel is also properly This is what you don’t get.
Our stocks are authentic
LE4104 #4 Enfield L shaped battle sight .....$8.00 ing eyeshade, drum adjustments w/ distinctive and solid installed like the USGI M1 Carbine. Others stocks on the market M1 Carbine.
LE4079 #4 Enfield stock & handguards set, used clicking allowing for deflection of 16 minutes of angle do not have this accurate feature. The wood grain/finish mimic the
................................................... $99.95 left or right, as well as elevation settings at 2 minutes of Tung Oiled finish of the Govt. Carbine stock. This fine stock comes with matching wood handguard,
LE3104 #1 MKIII Enfield barrel, orig GOOD angle each. Range drum allows adjustments at 50Yds per steel buttplate, M1 Carbine front band, M1 Carbine sling and oiler ...........................................$74.95
..................................................... $45.00 click out to 1000 Yds. Complete set comes w/ steel case, or 3 for ...................................................................................................................... $199.95 STK340
LE3049 #1 MKIII Enfield striker (firing pin) new (This is a SARCO, INC. product for use with the 10/22®)
adjustment tool, lens covers ..... and as a bonus Sarco includes 2 bases, screws, taps and drill
original factory ............................ $17.50
bits so you can install the mount. The Sniper Scope and the mentioned accessories for
LE4014 #4 Enfield complete bolt .............. $90.00
.....................................................................................................................$495.00 N3207
LE3064 #1 MKIII Enfield complete bolt ..... $69.95
RM57 Just a couple - .45-70 magazine for Navy Original #32 Scopes fetch as high $7500.00! Does NOT include scope mount. MILITARY RIFLE BOLTS COMPLETE ASSEMBLY
Arms .45-70 Enfield .................... $85.00
LE4013 #4 Enfield extractor spring.............$7.85 COMPONENT PARTS AVAILABLE INDIVIDUALLY TOO! #1 MK3 Enfield .22 LR cal
........................................ $100.00 LE3076
M95 Mauser complete bolt
.......................................$100.00 MSR547
LE3095 Rare long Lee and Lee Medford sliding dust 1. #32 MK1 SCOPE by itself .........................................................................$297.00 SCP034
cover, few only .......................... $100.00 2. Leather Lens Cover .................................................................................... $21.50 SCP036 #4 Enfield ...........................$90.00 LE4014 M95 Steyer Bolt ............... $75.00 MISC254
LE3059 #1 MKIII Enfield extractor spring $10.00 3. Front & Rear Base (Pads) ............................................................................ $39.95 LE4071 Berthier Bolt w/Long Handle MAS 36............................. $89.95 M36056
SLNG079 Sling, MLE-SMLE Pattern 14… 4. Drum Adjusting Tool.................................................................................. $22.50 SCP037 ......................................$125.00 MISC387 Mauser Veguiero (1904)
Reproduction of the pattern 14 leather 5. Transit Chest for scope ............................................................................$139.95 SCP035 Berthier Bolt w/Short Handle .......................................$135.00 MSR566
sling used for the SMLE (Short, Magazine 6. Full Set of Base Screws & Drills & Taps ...................................................... $39.95 LE4075 ......................................$100.00 MISC444 Model 1888 Mauser
Lee Enfield) starting in 1914...........$9.95 FN-49 (.30-06) .................$60.00 FN49056 .......................................$145.00 MSR640
BUILDING A #4 MKIT SNIPER RIFLE? 10. #4 MKIT ENFIELD SNIPER Jap Type 38 Complete bolt Model 98 Mauser .............. $79.95 MSR123
THE NO. 4 ENFIELD TARGET/ Mounting & tapping the bases is not easy. We
got a turnkey set for you – all one with the
RIFLE SCOPE MOUNT BASES ...................................... $135.00 JAP3805 Mukden Mauser..............$140.00 MSR467
• (Also called the “pads”) K98 ‘A’ Mauser ............... $175.00 MSR637 No.1 MK III Enfield
MATCH SIGHTS proper British thread.
7. 7 proper screws (we send you 2 extra in case you • Front and rear pads (set)
K98 Bolt w/Turned Down Handle ...........................................$69.95 LE3064
These sights were made by the .......................................$125.00 MSR114 No. 4 MKI Enfield................$90.00 LE4014
famous British gun maker. Parker- loose or mess up any) LE4071 $39.95
8. The two taps you need with the proper thread.
M1891 Mosin Nagant ........ $89.95 N91008 P17 Enfield ........................ $75.00 P17016
Hale, for use on a high power mili- (only have a few of the sets) M1903/A3 Springfield ........$42.00 SPF004 Remington 513T match rifle complete bolt
tary target or sniper rifle. 9. The two proper drills you need for the job –
British size ............................... $39.95 LE4075 M93 Mauser rifle .............. $65.00 MSR525 with new orig bolt head
• Long range vernier micrometer sight
• Adjustments up to 1300 meters Note: these tools are industrial quality and not M95 Mauser stripped bolt . $75.00 MSR542 ......................................$125.00 R513002
• Micrometer click adjustments for windage returnable. Set of 5 proper screws for the job
• Windage scale plate for possible adaptation w/o the tools ............................ $14.95 LE4076
This has got to be one of the most outstanding Enfield
No. 4 micrometer target sights ever offered. ENFIELD #4 MKIT SNIPER RIFLE CHEEK PIECES 1905 BAYONET PROJECT SPRINGFIELD WOOD
Set of original and
TO INSTALL THIS SIGHT ON YOUR #4 ENFIELD. TWO
SIMPLE OPERATIONS ARE NEEDED. Full and clear in-
Just in the door! Complete with proper brass
new made parts for BAYONET GRIPS
screws. Use to build your sniper rifle or also to assembling a 1905 New production, new condition wood
structions are included for the installation of this sight on
your fine Enfield rifle. We could have charged $100 to $125
create a high comb buttstock bayonet. Years grips for the M 1905 pattern bayonet
for this fine sight, but we’ll offer it now at only .........................................$24.95 LE4106 ago we had 2,000 as used on the M1903 Springfield
................................................................ $49.95 PH007 blades manufac- rifle. Fix up or up-grade your old
NOTE: This sight PH007 does not have the adjustable Complete set of #1 MKlll BAYONET FROGS tured and rewelded bayonets with these beautiful new
aperture. stock hardware– buttplate, We have 4 leather historical onto handles with grips. Heavily grooved for better holding,
ORIGINALLY HAD 4,000 PIECES, NOW WE’RE ALMOST swivels, forend collar as- bayonet Frogs for wearing on great success, al- just like some originals we found and sent
SOLD OUT!! sembly, bands, nose cap, waist belts. lowing us to sell 1905 bayonets again. Now we to the wood workers to copy. Screw and nut
GOOD NEWS! We found a couple dozen of these Parker rear sight protector, stock A. SWEDISH MAUSER - have a very limited group of these complete sets included. Ready to fit on to your blade
Hale #4 Enfield sights in the warehouse that still have the bolt and all related parts. 27 original, fair condition of parts remaining. The handles and hilts are ............................................ $9.95 per set
multiple adjustable apertures as we had before – while they parts $48.50 LE3094 See ..............$5.95 MSR258 A. B. C. D. E. F. G. H. from original U.S. bayonets that were demilled or 3 sets for ..................... $24.95 GRP143
last! .........................................................$95.00 PH021 our website for complete list of B. JAPANESE ARISAKA - late mfg, new, for Type 38 & Type 99 by the U.S. govt. Grips and internal handle
parts in kit bayonets ...................................................................... $9.95 BAY115 parts and blade are new mfg. Set of parts:
RARE STOCK SET C. YUGOSLAVIAN MAUSER - original good condition ........ $7.50 BAY054 .............................................. $29.95 BAY232 BAYONET GRIPS & SCREWS
(stock, forend & HG’s) for #4 MKII Enfield (trigger Enfield questions? D. GERMAN K98 MAUSER - late mfg, new, fits WWII K98 bayonets *Add a scabbard for ....................... $9.95 ea, BAY164 Original Yugo ’98 Mauser bayonet
................................................................................... $9.95 MSR111 or 10 for ............................... $89.95 BAY233 grip sets ............................ $5.95
on the receiver) – New condition. Need to stain to Email Eric for answers! E. SOUTH AMERICAN FROG WITH U.S. BRASS BELT HOOKS-
match. Without cross bolt Emeiselman@sarcoinc.com 3 for ................................. $14.95
.................................................$140.00 LE4116 Compact 4-inch leather belt frog for bayonet & scabbard. Fits LE3083 Original grips for Enfield #1MKIII
scabbards similar to Enfield 1907, K98 etc. Original VG
#4 MKII Stock Set, used w/o cross bolt CMP GARAND M1 M1943 & M1 10" BLADE (1907) bayonet ................... $9.95
.................................................$109.95 LE4074 ENFIELD PARTS, PARTS condition military surplus ......................................... $12.95 BAY258
F. SWISS BAYONET FROG - Swiss military frog as issued for the BAYONET REPAIR KITS, grips & screw, lever, BAY163 Original new G.I. grip screws for
#4 Standard Enfield Stock Set, used
................................................... $99.95 LE4079
& MORE PARTS! STGW-57 rifle bayonet. Also works with the K31 bayonets and latch button & spring. All the missing 1903 Springfield & WWII Garand
NOTE: We have most all parts many other similar style bayonets and scabbards ......... $8.95 BAY272 parts. These are nice repos – small quan- bayonet ..................... $3.95 ea.,
for #1 MKIII, #4 MKI and #5 G. ROMANIAN AK47 BAYONET FROG - Original leather military tity only. We will use most for our own 4 for ................................ $10.00
ENFIELD #4 MAG FOLLOWER AND SPRING! Enfield– along with many frog in used/very good condition ................................... $7.95 AK060 BAY179 Original new grip set for the British
Put one or more away fro the future to pretect
variations &
bayonets. May require minor fitting –
against mag failures!..........................$4.95 ea, H. BRITISH WW2 ENFIELD CANVAS FROG - Excellent condition belt #7 bayonet for the #4 Enfield
accessories. frog for holding the spike bayonet & scabbard or the #9 bayonet we fit ‘em! $24.95 BAY199
3 for ...................................................... $12.95 .............................................$12.95
Limited Supply LE4119 Check our website. and scabbard. Markings on back ............................... $16.95 BAY282
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 49
JUST IN !!!!!!!!!
We have just received a small shipment of M7 BAYO-
NETS… most with notable markings from the Vietnam
M16 BAYONETS
Sarco is pleased to offer a selection of original USGI,
SEE OUR H PAGE FOR
OTHER BAYONET ITEMS! G2
www.e-sarcoinc.com era. Many of these are getting difficult to find on the
market and some of these are very scarce and our foreign military contract, and new mfg bayonets.
A. U.A.E. (United Arab Emirates) Contract M16 bayonet
CARCANO CAVALRY CARBINE supply is quite limited. These bayonets are in very
good condition. Scabbards are sold separately. with black synthetic scabbard. UAE emblem on
BAYONET, MODELS 1891 & BAY283 M7 BOC manufactured ......... $34.95
(major producer for Vietnam War)
handle and also on scabbard. New/unused ................................. $39.95 BAY237
B. USGI M7 Bayonet in very good condition with M8A1
M1938 NEW
BAY284 M7 Imperial manufacture
Scabbard ..................................................................................... $34.95 BAY001
..........................................................................................................$34.95 (Contracted in 1973)
Original steel bayonet used ITEM!
BAY285 M7 Conetta manufacture .................................. $49.95 (out of business by end of Vietnam War) *Also have a small number of the M7 bayonet in
on the Carcano M1891 and BAY286 M7 Milpar manufacture ...........................................................$49.95 (Made between 1964-67) Excellent condition with ‘like new’ scabbard ................................ $39.95 BAY003
the WWII era M1938 carbines. Very BAY287 M7 Ontario manufacture ...................................................... $34.95 (post-Vietnam production ) C. Econo M7 bayonet w/ scabbard – these are not mil spec, but fit
BAY288 M7 Gen-Cut manufacture ..................................................... $39.95 (post-Vietnam production ) and look like the M7 bayonet and scabbard. New condition ........ $19.95 BAY229
difficult to find these days and for BAY289 M7 FZR manufacture
some reason, missing from large .................. $199.95 (rarest of the M7. Made between 71-73 / production run of only 40,000 pcs. D. New G.I. M16 bayonet in original, G.I. packaging. Only A Few Left! $39.50 BAY172
numbers of the Carcano Carbines. M8A1 BAYONET SCABBARDS – WE HAVE SEVERAL TYPES TO CHOOSE FROM: M8A1 SCABBARDS TO FIT THE FOLLOWING
We have a limited number in VG/ BAYONETS!
M5 & M5A1 Garand, M3 Trench Knife, M4 for M1 Carbine,M6 for M14 Rifle, M7 for M16
AR/M16 M9 STYLE BAYONET &
Exc. condition. Bayonet only New Military Contract$17.95 ea BAY083 SCABBARD
.............................$30.00 BAY251 Excellent used military contract ............................. $14.95 BAY191
We have a small quantity of U.S. G.I. M8A1 scabbards. VG condition
A fabulous deal for a solidly built knife with wire
..................................................................... $19.95 BAY040 cutter and sharpening stone! Full of heft and fits securely
(Call Cholly for bulk purchases on M8A1 scabbard BAY083) on the M16 / AR15 rifle with bayonet lug. A terrific camping
Original G.I. new M8A1 scabbard. Just found a few in the warehouse from the old days. or hunting knife too. 7-3/4" stainless steel blade!
Has original USGI scabbard body ....................................................... $24.95, 10 for $199.50 BAY041 ................................................................ $29.95 BAY219
GERMAN K98 MAUSER BAYONETS WWII ITALIAN MODEL 1938 CARCANO FOLDING BAYONET, LATE
Finally we have them back in stock! Beautiful new mnfr. Bayonets with scabbard and we have
BRITISH SYKES MANUFACTURE NEW
ITEM!
both the Wood grip bayonet and the
‘Bakelite’ plastic type grip bayonets. Both come with markings. FAIRBAIRN FIGHTING Italian Carcano Model 1938 Short Rifle
“folding bayonet”. Marvelous design intended so
K98 Bayonet & Scabbard w/bakelite/plastic grips ........................................ $39.95 BAY254 that the bayonet could remain on the rifle and
K98 Bayonet & Scabbard w/wood grips ........................................................ $34.95 BAY165 KNIFE W/ SCABBARD retain a lower signature when not in use. Born out
of the long hot arduous campaign in Ethiopia, the troops clamored for lighter gear and this ushered in a
British & Allied soldiers move to reduce weight and size of bayonets. Upon enemy contact, a push button could be pressed and
NEW
loved this knife which was ITEM! the blade swung into locking position. A favorite of Paratroopers in both the Rifle and SMG version. While
folded, the knife became a very convenient utility knife as only 3-5/8” of the blade protruded beyond the
specifically made for sentry handle. Otherwise when the blade was extended on the gun, the blade was 7” long which also made it a
removal and still to this day, serves very good size for hand to hand fighting. These were highly coveted and so few are on the surplus market
with the SAS. Steel 7.5" long blade that they command very high prices. You may also see these referred to as bayonets for the Mannlicher
- Carcano Short Rifle in many reference books. Needless to say this bayonet saw combat service in the
with your choice of handles:
RUSSIAN MOSIN NAGANT BAYONETS
Sarco has 4 flavors of bayonets for Mosin
1. Sykes Brass Handle Knife w/
WW2 Italian campaign and in the Ruso-FIn war. Sarco brings this rare piece of history to you at an af-
fordable price! ................................................................................................................$89.95 BAY245
Scabbard
Nagant series of rifles and carbines. All in
excellent condition and offered with and
without scabbards.
..........................$24.95 BAY274
2. Sykes Steel Handle Knife w/
ALLIED D-DAY FIGHTING KNIFE
Clever designs for fighting
Mosin 91/30 bayonet.... $19.95 BAY019 Scabbard knives were applied and is-
Mosin 91/30 bayonet with leather ..........................$24.95 BAY275
scabbard ...................... $34.95 BAY084 sued to various units prior to
Mosin 91/30 Early Cavalry Carbine D-day as units waited for the
bayonet, 11.5" blade invasion. One inspired design
..................................... $44.95 BAY261 during this period was made using the French cruciform Lebel blade set
Mosin 91/30 Early Cavalry Carbine bayonet and leather scabbard
..............................................................................................................$54.95 BAY293
within a knurled steel handle. Far sleeker than the British Sykes, U.S. V42
Mosin M44 Carbine bayonet, single ear type 1945 & earlier ...................$28.95 BAY262 stilettos, and M3 knives, this @7 inch blade was very low profile and quick
Mosin M44 Carbine bayonet, double ear type connection .......................$26.95 BAY263 to penetrate any clothing or tissue which made it ideal for sentry removal.
Long leather scabbard for Mosin Nagant 91 and 91/30 bayonets .......... $14.95 N91081 Also, where a grinding wheel was available, each of the 4 edges of the cruci-
Short leather scabbard for Mosin Nagant Cavalry Carbine and M44 bayonets
form blade could be sharpened to assist with slashing in hand to hand
..............................................................................................................$18.95 BAY277
combat. A fantastic self-defense weapon! New mfg, knife with scabbard
....................................................................................... $27.95 BAY256
M1 GARAND BAYONETS M8A1 BAYONET SCABBARDS
Sarco has a limited quantity of M1 Garand Bayonets in both M8A1 Scabbards to fit the following bayonets!
original, and new/late production versions with blade lengths M5 & M5A1 Garand, M3 Trench Knife, M4 for M1 Carbine,M6 for M14 Rifle, M7 for M16
New Military Contract ............................................................................................. $17.95 ea BAY083
from 6.5 to @ 16 inches, sold with, and without scabbards. Excellent used military contract .................................................................................... $14.95 BAY191
We have a small quantity of U.S. G.I. M8A1 scabbards. VG condition ............................ $19.95 BAY040
A. Original 10" Model 1943, Unmodified Bayonet w/ (Call Cholly for bulk purchases on M8A1 scabbard BAY083)
Original G.I. new M8A1 scabbard. Just found a few in the warehouse from the old days.
late production US scabbard Has original USGI scabbard body ......................................................$24.95, 10 for $199.50 BAY041
............................................................................... $64.95 BAY193
COLLECTORS BAYONETS
C. Original 10" Model M1905E1, Modified Spear Point
blade w/ late production US scabbard
............................................................................... $64.95 BAY194
DEAL: Buy 1 each of the above 2 bayonets w/scabbards
.............................................................................$120.00 BAY268
VARIOUS COLLECTORS BAYONETS & ACCESSORIES
BAY031 SKS spike bayonet, stripped ...........................................................................................$3.95
D. New Made 16” Model 1943 bayonet & scabbard BAY125 Brown Bess Reproduction bayonet scabbard ..................................................................$9.95
...................................................................... $39.95 BAY182 BAY162 Nice repro of leather scabbard for the Trapdoor Springfield trowel bayonet – complete,
E. New Made 10” Model 1943 bayonet & scabbard .................. $32.95 BAY183 ITEM D - 16" $29.95 BAY182 few only ...................................................................................................................... $24.95
F. Original M5A1 bayonet w/ M8A1 scabbard, GI ECK002 Swedish G3 Bayonet (3 crowns) with scabbard, new original – Few only ...................... $65.00
.............................................................................................. $36.50 BAY189 SPECIAL RARE COLLECTOR M1 GARAND BAY043 Perfect reproduction leather scabbard for 1941 Johnson rifle bayonet. Almost sold out –
ALSO….We have RARE M5A1 Garand bayonets marked KM5A1 BAYONETS. FEW ONLY AVAILABLE. can’t tell from original ................................................................................................. $29.95
Turkish contract Korean War ... $70.00 BAY226 BAY217 Rare find – found 15 only – M5 Garand bayonet with aluminum grips ......................... $50.00
.............................................................................................. $59.95 BAY020
Greek contract complete with original Greek BAY013 Swedish M1896 Bayonet w/o Scabbard - Very good to excellent
G. Original Korean Army version of the 1943/ 1905 blade shortened to their Scabbard ................................. $74.95 BAY238 condition. Without Scabbard
requirement of between 6.5-7" length. These were imported from the military by Arlington M5A1 Garand Bayonet with aluminum grips- .................................................................................. $29.95 BAY043
Ordnance years ago, and we have found a handful remaining in the warehouse. with original m8A1 scabbard ... $75.00 BAY200 BAY043 M1941 Johnson Rifle Bayonet Leather Scabbard New
Complete with original Korean short scabbard .......................................$49.95 BAY240 Original Norwegian Kongsberg M1 Garand bayo- .................................................................................. $29.95
Also have a few original Korean scabbards by themselves Used...$14.95 ea BAY135, net 1954 issue (only 12 available)
..............................................$150.00 BAY239
New...$24.95 ea BAY271 Go to our website for a full listing! SEE OUR WEBSITE FOR FURTHER DESCRIPTIONS AND INFORMATION
DANISH AG-3 RIFLE FAL TUBULAR BAYONET
Original early FAL bayonet for thin
ENFIELD #4 SPIKE BAYONET BRITISH STEN MKII SMG BAYONET BAYONET & SCABBARD barrel, short flash hider FALs and
Rarely seen today as most were destroyed, this
Original bayonet for the Enfield Original German Eickhorn manu- STG-58. Bayonet w/
bayonet fit over the barrel and provided the
#4MK1 rifle and Sten MK5 SMG. same last ditch protection to the shooter as the factured G-3 Bayonet contracted scabbard w/o belt connection.
Complete with scabbard spike bayonet for the Lee Enfield. Simple to install, effective in use, and not for Denmark and marked with the ............................ $18.95 BAY171
................................................... $14.95 BAY106 labor intensive to produce like a blade bayonet, New Mfr... $34.95 BAY246 Royal Crown. These are unissued Bayonet w/o scabbard
and as good a fighting knife as a .............................. $9.95 BAY156
BEAUTIFUL CURRENT PRODUCTION SCABBARDS FOR YOUR CMP
bayonet. Good balance and solidly
1903 SPRINGFIELD RIFLE BAYONET AND COLLECTOR BAYONETS
M3 scabbard for 16" M1942 bayonet ........$12.95, built ...................$65.00 ECK003
Steel 1903 Springfield Rifle bayonet offered with WW1 3 for .............................................$35.95 BAY176
style lined grips. Replicated from the original, this 10" Garand scabbard ..................................................$11.95 BAY175
20.5" bayonet comes without scabbard. Excellent NEW
quality ........................................... $39.95 BAY292 WWI GERMAN ‘PIONEER’ BAYONET SCABBARD ITEM!
(While they usually fit well, some minor fitting may be Long leather scabbard as is-
needed as the double lug band on the Springfield Rifle sued with the German 1898 SKS SPIKE BAYONET, COMPLETE
can vary the fit, depending on when it was long plain or sawtooth bayonet. Original and ready to install
manufactured.) Faithful copy of the original that is so difficult to find. NEW ............................... $9.95 SKS039
ITEM!
@23" Long. Scabbard only..................$19.95 BAY276
U.S. M8 CLEANING ROD SET M1A1 ORIGINAL REAR GRIP/STOCK ASSEMBLY M1 CARBINE
$18.95 CLN166 Almost impossible to find, we
M1 CARBINE PARTS & ACCESSORIES
See our website for details ! have located a small batch of LINED GUN COVER
USGI M1A1 Rear wood pistol For those who want more than a
grip and folding stock assem-
blies which are virtually com-
NEW!
ITEM
OUR FAMOUS M1A1 PARA- canvas gun cover, we have some lined
covers which mimic lambs wool and
plete with the exception of 1 screw, two springs,
washer, spacer, and leather cheek piece which TROOPER CARBINE STOCKS will provide a soft, non-abrasive bar-
generally speaking, should be easy to quickly rier to protect wood and metal. Olive
replicate or find at the hardware store. While
they last! .......................... $495.00 CRBFP20
AVAILABLE AGAIN !! drab & U.S. marked.
WWII PATTERN M1 CARBINE We also have the following parts for the M1A Stock:
This is a perfect and exact reproduction of the ..............................$20.95 CRB197
CARRYING CASE Hinge Screw................................................................$39.95 CRBFP21 WWII M1A1 Paratrooper Stock. Each stock
Recoil Plate .................................................................$64.95 CRBFP22
These are a very close copy of the
Lower Hinge Assy........................................................$89.95 CRBFP24
has a matching handguard, so your treasured
World War II M1 carbine case. Made Recoil Plate Cover .......................................................$74.95 CRBFP23 carbine will look beautiful.
from the same type and color heavy Original ‘SA’ marked Wood Grip ............................... $125.00 CRBFP25
cotton O.D. duck, with proper brass
(See website for other M1A1 Stock Parts)
zipper and leather tabs, this case
is even “U.S.” marked, as were the
M1 CARBINE BARRELS M1 Carbine G.I. Collectors
originals, carrying strap included. Will New & Made to the G.I. Print ! Check our website for G.I. M1 sorted
hold all M1 and M2 carbines. Ideal for Finally after decades of searching for M1 $149.95 collectors parts! We have sorted a lot
Carbine barrels worthy of consideration of G.I. parts – Some are really rare!!
storing or carrying your carbine; for as a replacement on a GI issue Carbine, Sarco has obtained brand new U.S. 3 for $399.95
reenactors and collectors. New condi- made barrels in 4140 steel that are completely machined, bored, properly cut
tion SALE!! .................$17.50 ea. with inlets for the front sight, machined & swedged gas block/ piston, breech
This is absolutely the best CRB098 We have M3 sniper scopes and one super rare M2
quality available sniper scope in stock. Also new original G.I. parts
3 for ..................... $47.50 CRB094
with proper hood not found on commercial barrels, and bore with a 1 in 20 (Gun Not Included) – Check our website or call MG Dave
twist! What better way to obtain an M1 Carbine barrel with the true military GI
profile! Barrels are in the ‘white’, without finish. Finally you can be assured of Other Accessories Available: Carbine Stock Pouch $9.45 CRB134
Sling and Oiler $10.95 CRB088
M1 CARBINE DUAL CLIP HOLDER the perfect replacement barrel for your M1 Carbine.
NOTE: features of this barrel also include : Bulk buyers of this great stock, call Dave or Cholly. M1 CARBINE FLASH
$5.95 CRB101 USA MADE BY OLD NEW!
Short chambered .015
Heat treated 4140 (28-30 RC)
SCHOOL BARREL MAKER ITEM
HIDERS
Gas Cylinder/Block made from 4140 steel, rolled and swedged onto the barrel. SELECTION OF STOCKS FOR YOUR New, G.I. style flash
M1 CARBINE SPRING & PIN KIT These are NOT castings nor are they soldered or welded onto the barrel, but hider, clamps easily onto
All the pins & springs in a M1 Carbine made from forged bar, pressed, swedged, and rolled into place as the original GI M1 OR M2 CARBINE the muzzle of any G.I.
$9.95, 3 for $27.95 CRB173 barrels were prepared! Sarco’s special introductory price: $149.95 CRB183 Walnut M2 Carbine pot belly stock, good used G.I. .. type M1 Carbine Marked
...........................................................................$49.50 CRB014 “Hider, Flash M3”.......$26.95 CRB097
Walnut G.I. M2 Carbine stock – standard, not pot belly – good, used
M1 CARBINE PISTON NUT WRENCH Check our website for new 15 & 30 ROUND ROCKOLA T-3 G.I. cond.............................................................$44.50 CRB167
SPECIAL! Flash hider muzzle brake
Available again ...............$12.95, CARBINE MAGAZINES – In stock – GI pattern CARBINE combo........................$49.95 CRB132
Walnut G.I. M1 Carbine stock, good used G.I. cond.
3 for .................... $34.95 CRB003 CRB010 15rd magazine .............$11.95 ...........................................................................$49.95 CRB013
CRB008 30rd magazine .............$14.95 RECEIVERS
Ordering instructions are in the ad or on ARE IN
NEW M1/M2 Carbine stock & handguard set – Current prodution. M1 CARBINE
Really nice walnut stain. Ready to install on G.I. parts - can be used
ORIGINAL MILITARY CARTRIDGE DE- our website STOCK!! on m1 or M2 Carbine ..........................................$79.95 CRB190 MUZZLE BREAK
FLECTOR FOR M1 CARBINE – fastens See page GP2 or New, G.I. style clamps onto
to top of receiver w/ M1 CARBINE SCOPE MOUNT check them out M1 CARBINE MILLED REAR COMBAT SIGHT muzzle of any G.I. M1 Car-
Installs in seconds with NEW! bine. Designed to reduce
wire form “grip- NEW! no special tools. No on our website! Back in stock ..........$29.95 CRB154 ITEM recoil on the M-2 Carbine.
pers” to deflect fired ITEM drilling or tapping. Fits
all G.I. or commercial
Marked “Check, Recoil M1”
cases to right of gun – M1 CARBINE BANDS on bottom ...............$26.95 ea. CRB102
keeps ‘em out of your line of sight.
carbine only
$14.95 CRB103 First model barrel band assembly with
M1 CARBINE SLINGS
New surplus ....................$7.95, Scope mount with 1"
rings $21.95 CRB104
swivel and screw. Perfect for restoration of
an early WWII pattern carbine. New. Just bought AND OILERS WWII M1 CARBINE
3 for ..................$19.95 CRB096 Special of the Month a good deal on 1st model M1 Carbine barrel bands SLING AND OILER SET LEATHER SCABBARD
and will pass it on to you. Previously $20-$25 ea, $10.95 ea.
now!! ................ $14.95, 3 for $39.95 CRB023
M1 CARBINE TOOLS & ACCESSORIES Don’t forget to visit 50 sets for .... $349.50 ($7.00/set)
E-SARCOINC.COM for 1000’s of 100 sets for
A. Front sight installation tool M-1 CARBINE POUCHES ......... $599.00 ($6.00/set) CRB088
............................$26.50 CRB174 Carbine Rifle items! & MAGAZINE SETS OILER ONLY ................... $4.95 ea.
B. Front sight removal tool Individual pouches for sale as well as combination 50 for............................... $149.50
............................$26.50 CRB175 sets with magazines. Every order with magazines
C. Receiver wrench with barrel block M1 CARBINE SPRING KIT gets a free original USGI rubber dust cover with 100 for.................. $275.00 OIL019 Gun not included
A put-away special: slide each mag.! SLING ONLY.................... $7.95 ea.
set for barrel removal and These are truly Scarce as Hens Teeth!
stop, recoil, extractor, ejector, 1. CARBINE STOCK POUCH - holds 50 for............................... $300.00
installation...........$49.95 CRB006 NEW! 2-15 rd. magazines and slides onto 100 for............... $350.00 SLNG005
For whatever reason there are very few
SPECIAL – Set of all A, B & C tools sear, hammer trigger, & mag ITEM the wood stock. New repro. With of these remaining on the collectors
catch spring $14.00 value. Early WWII pattern Khaki color M1
............................$99.50 CRB176 markings on front & back................ $9.45 or market so we have thoughtfully had
Only $6.95, 3 for $18.95 Carbine sling ............. $9.95 SLNG006
D. Rear sight installation adjustment 3 for ......................................$24.95 CRB134
them made from an original utilizing
tool ......................$79.95 CRB177 CRB137 ( pictured on Left )
strong leather, brass cover and correct
SPECIAL – Set of all A, B, C, & D
tools above ........ $159.95 CRB178
2. CARBINE BELT POUCH - holds 2-15 rd.
magazines and slides onto belt. New, GI. M1 CARBINE fasteners, and markings. This was used
............................................... $8.00 CRB092 by Cavalry, on motorcycles, jeeps, half-
ORIGINAL BOX OF 100 DUST COVERS
Blank Adapter
.............................. $9.95 CRB093 M1 Carbine fans will love this
3. CARBINE BANANA CLIP POUCH -
holds 4- 30rd. magazines. Slides onto
PROJECT BARRELS tracks etc. Originally made for the full
belt ..............$9.95 or 3 for $24.95 CRB090
These are new barrels in process from the stock M-1 Carbine, it also fits similar
Bolt Assembly tool deal! Original G.I. cardboard box old PMC Carbine Factory. Bought ‘em 30
( pictured on Right ) sized firearms like the Ruger® 10/22®
............................$22.50 CRB002 containing 100 pcs. of the rubber ____________________________ years ago. Just dug out of the warehouse. with the Sarco stock. Originals can fetch
Magazine, 15 shot, new carbine dust cover These are fully profited and threaded but
............................$11.95 CRB010 4. COMBO A: 2- 15 rd. Magazines and $400-$700. Sarco brings this quality
...$19.95, 2 for $34.95 CRB188 Stock Pouch w/dust covers ...$29.95 CRB191 have no chamber or gas block. Barrel is leather item to you at the fabulous price
Piston nut wrench 5. COMBO B: 2- 15 rd. Magazines and milled for front sight key slot
.......................................$12.95, of ............................... $57.95 CRB189
Belt Pouch w/dust covers......$28.95 CRB192 .................................... $29.95 CRB194
3 for .........................$34.95 CRB003
Tool, trigger spring removal
M1 CARBINE MAGAZINE 6. COMBO C: 4- 30rd. Magazines and
Banana Clip Pouch w/dust covers
$19.95, 10 for $189.95
Your choice with gas port hole or without. ORIG WWII G.I. M1 CARBINE
.............................. $3.95 CRB004 DUST COVER .............................................$69.50 CRB193
*Follow State & Local laws when ordering magazines* KHAKI CLEANING ROD POUCH
Sorry tools are not returnable Original rubber dust cov- *Front sight key slot is milled. New cond. Few only. WWII mark-
NEW! ers back in stock after
ITEM Also have a small number of these ings. Found in the warehouse
many years! These are G.I. and
barrels as noted above, but with $6.95 CRB172
in excellent condition. They fit
a non-military piston housing at-
easily over the top feed area of the
tached. Appears these barrels are NEW FLAT (WWII STYLE) M1 FORGED
magazine.…
complete including chamber, but
5 pcs. for .......................... $3.95, M1 CARBINE REAR CARBINE BOLTS
sold as-is. ...........$39.95 CRB114
ERMA EM1 PARTS AVAILABLE! 10 pcs. for ........................$5.95, Stripped $59.95 CRB070
ADJUSTABLE SIGHTS
SEE OUR WEBSITE!! 25 pcs. for .......... $12.50 CRB095 New condition $17.50 CRB155 Complete $89.95 CRB072
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 51
J2 SPF020
SPF021
SPF023
Cutoff ..............................................$8.50
Cutoff Plunger .................................$2.00
Cutoff Screw....................................$2.00
SPF398 1903 Rear sight complete assembly w/base
(barrel ring not included) .............. $64.95
SPF294 1903A3 Rear sight G.I. used ......... $40.00
SPRINGFIELD RIFLE
SPF024 Cutoff Spindle .................................$3.50 SPF049 Springfield Ring, Handguard to Receiver
50 Hilton Street, Easton PA 18042 SPF022 Cutoff Spring ...................................$1.50 1903A3 ...........................................$6.00 SPRINGFIELD PUT AWAY
SPF342 Die cast buttplate assemblies for 1903 SPF053 Safety Lock ......................................$8.00 NEW!
www.e-sarcoinc.com /
610.250.3960 Fax: 610.438.2548
Springfield - looks like a milled buttplate
(new orig). Super rare! Collector’s dream
SPF054 Safety Low Scope Type.................. $16.50
SPF086 Screw Buttplate Large .....................$2.50 KIT 1/2 PRICE! ITEM
...................................................... $39.95 SPF085 Screw Buttplate Small .....................$1.75 Trigger, 2 sears, 1 milled follower,
SPF309 Early ‘03 bolt stop, new orig. G.I. .. $16.00 SPF092 Screw Stacking Swivel 1903 ............$2.00
SPF028 Ejector.............................................$5.00 SPF056 Screw Trigger Guard Front ..............$3.00 2 ejector, 2 strikers, 1 mainspring, 2 trigger
1903 SPRINGFIELD
SPF001 Band Front Sight 1903 ................. $13.50
SPF029 Ejector Pin.......................................$2.00
SPF025 Extractor ...................................... $14.95
SPF057 Screw Trigger Guard Rear................$3.00
SPF074 Screwdriver Three Blade ..................$9.95
pins, 1/2 price special ...... $15.80 SPF095
SPF027 Extractor Collar ............................ $10.00 SPF055 Sear ................................................$7.50
SPF002 Band Front Sight 1903A3 ............. $12.00
SPF026 Extractor w/ Hole ......................... $16.50 SPF072 Sear Pin ..........................................$2.00
SPF253 Band Lower, new GI blue 1903 ..... $25.00
SPF033 Floorplate (milled) 1903 ................ $19.95 SPF062 Sear Spring .....................................$2.00 U.S. SPRINGFIELD RIFLE ‘PEDERSON’ DEVICE MAGAZINE POUCH
SPF011 Band Lower (milled) 1903 ............. $20.00 Original WWI era manufactured canvas pouches for the
SPF034 Floorplate Catch Assembly ..............$8.75 SPF266 Set of G.I. Milled Trigger Guard, Floorplate,
SPF012 Band Lower w/Swivel (milled) 1903 NEW!
SPF031 Follower (milled) 1903.....................$7.00 Floorplate Catch Assy ................... $99.95 famed Pederson Device. In excellent condition considering ITEM
.................................................... $23.95
SPF030 Follower (stamped) 1903A3 ........... $10.00 SLNG067 Sling keeper, ¼” for 1907 sling, orig, their age and there is no dry rot! These pouches have U.S.
SPF014 Band Lower w/Swivel (stamped)1903A3$17.50
SPF032 Follower Spring ...............................$4.00 new GI...................................... $5.95 ea,
SPF018 Band Screw Upper Band 1903 .........$3.00
SPF036 Front Sight Base Pin........................$1.50 2 for ................................................$9.95
belt hooks and hold 5 magazines. Great for holding contemporary
SPF019 Band Screw Upper Band 1903A3 .....$3.00 magazines too, like the 32 Rd./25rd. Uzi mags., MP40 mags. ,and
SPF035 Front Sight Blade 1903....................$6.00 SPF013 Sling Swivel for Band (milled) 1903
SPF263 Band & Hardware Set, milled 1903 similar sized magazines ....................................................................... $24.00 SPF395
SPF333 Front sight blade 1903A3 ................$5.00 .......................................................$7.50
.................................................... $54.95
SPF044 Front Sight Cover ......................... $12.95 SPF067 Spring Band Retainer (milled) ....... $14.50
SPF265 Band & Hardware Set, 1903A3 .............$49.95
SPF093 Front Sight Key 1903A3 ..................$2.25 SPF066 Spring Band Retainer (stamped) ......$4.00
SPF003 Base rear sight (not sleeve) ........... $12.00
SPF306 Bolt, early smooth body, bent handle $125.00
SPF037 Front Sight Pin ................................$1.50 SPF058 Stacking Swivel and Band (exact USMC RIFLE CANVAS CASE NEW!
ITEM
SPF039 Front Sight Screw 1903 ..................$2.75 reproduction) 1903A3 .................. $15.00
SPF374 Bolt, early smooth body, Nickel Steel
....................................................... $200.00
SPF038 Front Sight w/Stud 1903 ................$9.95 SPF350 Stacking swivel screw 1903A3 .........$2.00 W/ SHOULDER STRAP
HNGD01 Handguard 1903 (new G.I.) ......... $14.95 SPF068 Stacking Swivel Used G.I. (milled)1903 Green canvas rifle bag is perfect for
SPF004 Bolt Late (complete) ...................... $42.00
HNGD37 Handguard 1903 used cracked repairable ...........................................................$9.50
SPF005 Bolt Late (stripped) ....................... $20.00 the 1903/03A3 Springfield and the
.............................................. 10/$39.95 SPF366 Stacking swivel and band assembly, 1903A3
SPF385 Bolt sleeve complete w/lock assembly &
safety ........................................... $26.95
HNGD02 Handguard, U.S. 1903A3 (new G.I.) G.I. used ...................................... $18.00 M1 Garand rifles ... $14.95 GRD347
.................................................... $65.00 SPF367 Stacking swivel 1903A3 G.I. new .....$6.00
SPF008 Bolt Sleeve (stripped) .................... $15.00
SPF084 Handguard Clips (Two Packs) ..........$3.85 SPF335 1903A3 stamped replacement rear sight.
SPF009 Bolt Sleeve Lock ..............................$4.75
SPF010 Bolt Sleeve Lock Spring ...................$1.75
SPF384 Bolt sleeve w/lock & spring ........... $19.95
SPF043 Handguard Plastic (New) 1903A3 .. $15.00
SPF347 Lower band assy w/swivel, used orig
Remington 1903 ........................... $47.50
Perfect for drill rifles ........................$5.95
3 for ............................................. $14.95
SPF113 Stock cross bolt & nut .....................$9.65
1903 SPRINGFIELD RIFLE SPORTER HINGED
SPF352 Bolt stripped & welded in firing pin hole
1903(A3) ......................$3.95, 5 for $14.95
SPF351 1901 era, Springfield bolt body, smooth, not
SPF348 Lower band screw, new 1903 ...........$1.95
SPF349 Lower band screw, new 1903A3 .......$1.95
SPF090 Striker .............................................$7.40
SPF052 Striker Rod ......................................$6.00 TRIGGER GUARD PROJECT
heat treated .................................$300.00
SPF046 Mainspring ......................................$4.00 SPF051 Striker Sleeve ..................................$3.00 These are the famous Flaig Ace & Fire-
SPF339 1903 MKI Orig Sear & Trigger Assembly (for SPF076 Trigger Grooved ............................ $13.95
SPF357 Bolt R marked for early Remington 1941-42,
Pederson Device) ....................... $125.00 SPF077 Trigger Pin.......................................$1.50 arms Int. hinged trigger guards. Been
stripped ......................................... $65.00
SPF358 Bolt BF (Barney Forge) Springfield 1941 &
OIL035 Oiler, late plastic WWII, new ......... $13.95 SPF075 Trigger Plain ....................................$9.95 sleeping for 30 years. Alloy casting set of
OIL015 Oil and Thong Set (Metal) ............. $35.00 SPF368 Trigger guard, 1903A3 used G.I ... $32.00
42, stripped ................................... $45.00
OIL016 Oil and Thong Set (Plastic) Used ......$8.50 SPF382 Trigger guard, 1903A3—Reparked trigger guard, floor plate, follower, catch
BRUSH-001 Bronze bore brush 30 cal ......10/$9.95
SPF091 Butt Swivel (milled) 1903 .................$6.50
SPF094 1903 rear sight assy with windage screw .................................................... $36.00 & spring. This is what we consider our
without barrel ring ....................... $39.95 SPF117 Trigger Guard 1903 type, Milled ... $49.95
SPF061 Butt Swivel (stamped) 1903A3 .........$5.00
SPF143 1903 rear sight windage screw.........$7.50 SPF078 Trigger Guard 1903, Orig GI ......... $95.00 ‘sporting trigger guard project’ and you
SPF016 Buttplate (milled) 1903(used) ........ $20.00
SPF015 Buttplate (stamped) 1903A3 used
SPF273 Rear sight band 1903 (Orig) .......... $45.00 SPF079 Trigger Guard (stamped) 1903A3 will need to remove flashing along some of
SPF370 1903A3 Rear sight, perfect repro .. $29.95 .................................................... $31.50
.................................................... $15.00
SPF371 1903 Rear sight complete assembly w/base SPF083 Upper Band (stamped) 1903A3 ..... $16.00 the edges and screw holes will have to be
SPF121 Buttplate Milled fine checkered..... $35.00
SPF257 Springfield Composition Drill Rifle Stocks,
& windage screw (barrel ring not included) SPF081 Upper Band Used (milled) 1903 drilled. These trigger guards are the hinged type. Magazine well, catch
.................................................... $74.95 .................................................... $20.00
G.I., used, VG-Exc ........................ $39.95 and trigger slots are opened which will make this set easy to work
with! Quite limited ................................................ $19.95 SPF393
U.S. M1903 & 03A3 RIFLE PARTS 1903 SPRINGFIELD RIFLE 10
Note: Almost all of our Springfield parts are original, new G.I. bought 30-40 years ago.
RD. MAGAZINE M1903 & 03-A3 “SPRINGFIELD” RIFLE KITS
Steel 10 rd., .30-06
See our website for 1903 Springfield Drill Rifle Barrels SPF271 magazine for the 1903 se-
ries of Springfield military
BRAND NEW!! SPRINGFIELD 1903A3 BARRELS IT
NEW!
EM rifles. Makes a day at the
Yes we just received a shipment range more fun and looks
of high quality 4140, 4-groove These kits consist of every part of the “Springfield” rifle
great on the rifle too! Fits
barrels with shallow chamber, except the stock, receiver, and barrel assy. (w/sight bases).
the 1903 trigger guard $69.95 RM84
extractor cut, front sight cut out for base, with a 1 in 10 twist. We had these Kits will have bolts, bands, stamped trigger guard, swivels, trigger,
made with a shallow chamber (.044") to accommodate for receiver variations. In etc. Use these kits to build up to a rifle on your receiver or to rebuild an old
the white and unmarked! FALL SALE!
CHROME SPRINGFIELD PARTS ‘03. All parts are in new or like new condition.
SEE OUR WEBSITE
$95.00 $99.95 each, 3 for $277.95 $280.00 SPF387 M1903 KITS A. Parts kit includes new handguard
(Very Limited Availability) ..............................................$159.95 ea. SPF127
COMPLETE HARDWARE SET FOR
M1903A3 KITS A. Parts kit .................................$149.95 ea. SPF126
1903A3 SPRINGFIELD
1903 & 1903A3 SPRINGFIELD STOCKS
A. Good, may have arsenal repair, straight stocks............................... $75.00 SPF118
Same list as parts to the left only 1903A3 late
pattern. Value $55.00. Special $49.95 SPF265
C. For a new G.I. 2 groove 03A3 barrel add . $190.00
Barrels only sold at this price with kit purchase.
B. Select, much better than A. Nicer finish. Only very minor or no repairs, straight Note: Rear sight parts may be used G.I.
stocks ........................................................................................... $125.00 SPF116
C. WWII scant stock (semi PG) V.G .................................................... $125.00 SPF144
1903 SPRINGFIELD LOW
D. Composite Springfield drill rifle stock & handguard, exc cond SCOPE SAFETY ASSY 1903A3 TRIGGER GUARD ASSEMBLIES
........................................................................................................$39.95 SPF257 A brand new complete assembly – trigger guard + follower + spring + 2
E. Good cond composite stock and HG .................................................$29.95 SPF362
$16.50 SPF054 screws -$51 value ...........................................................$39.50 SPF375
F. Rough composite stock and HG ........................................................$19.95 SPF363 Complete assembly, used surplus - $51.50 value
G. Original finger groove stock, good condition as # 118 above BORE CLEANING BRUSHES .................................................................................. $39.50 SPF376
..................................................................................................... $145.00 SPF267 .30 caliber brass bore brushes, new. Trigger guard only, brand new ................................... $31.50 SPF079
H. Original new G.I. unissued walnut 1903 & A3 Springfield scant stocks – also $9.95/10 • $39.95/50 • Trigger guard, used G.I .............................................. $32.00 SPF368
called semi P.G................. $164.95 SPF259 might have slight rusting on cross bolt. $69.95/100
BRUSH-001 1903 & A3 SPRINGFIELD
See our website for all M1 & SPRINGFIELD RIFLE 1903A3 PIN & SPRING KITS
NEW! All the pins & springs in a Springfield rifle – 03 & BUTTPLATE COLLECTION
ITEM SPRINGFIELD STRIPPER CLIPS
M2 .22 Springfield parts. ACCESSORY SET A3 included $9.95, 3 for $24.95 SPF341 SPF344 New G.I. milled 03 ...........$35.00
Canvas roll up pouch Early brass WWI .....................$4.00 ea, SPF016 Used milled 03 buttplate
with original spares 5 for ................................$14.95 STC025 1903 SPRINGFIELD REAR SIGHT PARTS .......................................$20.00
SPRINGFIELD RIFLE CASE, NEW!
ITEM like extractor, ejector SPF143 Screw, windage ...........................* $7.50 SPF015 Standard A3 used ...........$15.00
& pin, striker, front SPF094 rear sight, complete without windage SPF121 Milled 03 fine checkered ..$35.00
MODEL 1918 sight hood, 3 blade
1903 SPRINGFIELD GRENADE screw w/o barrel ring, VG to Exc.$39.95 SPF342 Original G.I. die cast 03 buttplate
WW1 canvas case combo tool, pull LAUNCHING BOOTS SPF264 Rear sight complete w/windage screw & .......................................$39.95
with canvas flap, w/o barrel ring.......................... $44.95
through cleaning jag, A perfect reproduction of the SPF353 Hand select Smith Corona
SPF273 1903 sight base (around barrel)...$45.00
carry strap, and tub of gun grease, grenade launching rubber boot buttplate A3, used...........$35.00
* Above parts are new. Check our website for all
markings. Not many of these are found oiler, and a new .30 cal. bore brush. Terrific other ‘03 sight parts SPF355 G.I. stippled armorer match
maintenance items to keep your Springfield
(slip on) for the Springfield and
today, but this new mnfr. case is every milled buttplate...............$30.00
bit as good. Great for the M1 Garand too! Rifle running well.................$34.95 SPF389 M1 Garand. Absolutely meticulously SPF346 New G.I. 03A3 Buttplate ..$29.95
beautiful!! .............$34.50 MISC088 1903A3 SPRINGFIELD DRILL RIFLE BARRELS
@47 inches long .............$24.00 SPF392 These were removed from drill rifles & have their
ORIGINAL 1903 & A3 SPRINGFIELD STOCK chambers welded or have a rod in the barrel with COMPLETE NEW SCREW SET FOR 1903 &
FRONT ENDS – removed SCREWS FOR WINDAGE ON 1903A4 1903A3 SPRINGFIELD Includes:
M1903 TRIGGER GUARDS from original G.I. stocks. SCOPE BASE. ORIGINAL G.I. !
a small plug weld to hold it in. Front sight base
not included .................................. $12.50 ea, Upper band screw Rear guard screw
These are cut just behind the band – you can Front guard screw 3 Small buttplate and
MILLED TYPE use these to fix your Springfield stock with a
May not fit on all commercial scope bases. Outer
diameter of screw head is @ .400". Sold as a pair
10 for..................................................$99.95,
50 for.....................................$400.00 SPF270 Large buttplate screw swivel screws
(NOT STAMPED 03A3 TYPE) buttered front end. Glue it under the lower band Stacking swivel screw Cut off screw
for ............................................. $7.95 SPF397
Absolutely beautiful repro of 1903 Springfield milled so you cant see it. We cut ‘em off years ago. Lower band screw
trigger guard. Can’t really tell from original. Replace We’re using them too..........................$34.95,
BRAND NEW 1903A3 SPRING- Note: the 1903 kit also includes the front sight screw
the stamped ‘A3 guard in your rifle with one of these 3 for ..................................... $100.00 SPF372 EXTRA LONG REAR GUARD SCREWS FIELD REAR SIGHTS ASSEMBLIES (value $23.00) SPF378 – screw set for 1903A3
beauties. Finished in matte black, stripped (no floor- .......................................................... $11.95
plate) $49.95 ea. SPF117, Complete assy – trigger
FOR 1903A3 RECEIVERS Forgot we had ‘em ..................................$29.95, (value $26.00) SPF379 – screw set for 1903
The standard guard screw only goes up part way 3 for ........................................... $84.95 SPF370
guard with floorplate & catch assy $69.50 SPF343 SPRINGFIELD HANDGUARDS in an A3 receiver. This screw fills the hole to make Original G.I. A3 rear sight used VG
.......................................................... $13.95
Original G.I. walnut handguards. your rifle more attractive. Haven’t had these for 20 ................................................... $40.00 SPF294
years. The G.I. screws only engages a few threads. Check our website for A3 Sight Parts - Have all
SPRINGFIELD 1907 SLINGS, M1903, New, unissued
$3.95 ea, 3 for $9.95 SPF360 parts CMP SPRINGFIELD DRILL RIFLE
...................................... $14.95 HNGD01
LEATHER – AS USED IN WWI & WWII 1903A3 used cracked repairable
REPAIR KITS
1. SLNG024 WWI Model 1907 Sling (w/ brass All the missing or destroyed parts. Cut off,
hardware and WWI date) .......$16.95 ea.
10 for............................... $59.95 SPF261 1903 & A3 SPRINGFIELD SPRING KIT NEW GI SPRINGFIELD BARRELS Front sight, Cut off spindle, Bolt body, Cut
1903A3 plastic for drill rifle 1. New G.I. 4 groove 1903 Springfield barrel, dated off plunger, Striker (firing pin), Cut off spring,
3 for.............................................$47.95 A put-away for the future all springs in the 1943. 1903 front and rear sight bases were added
........................................ $15.00 SPF043 Stamped drill rifle rear sight $61.40 regular
2. SLNG025 WWII Model 1907 Sling (w/ steel gun – bolt sleeve lock, main, cut-off, sear, as a modification for use as a 1903. value – Sarco Value..........................$34.95
hardware and WWII date) 1903 handguard Type 2 (1910 to 1916) floor plate catch, & magazine follow $15.00 ................................................... $269.95 SPF386 3 sets for .......................................$99.95,
.............................................$16.95 ea. .................................................$150.00 value – Only ................................... $4.45, 2. M1903A3, New, G.I., 2 groove ..... $189.95 SPF080 10 sets for ........................$250.00 SPF361
3 for.............................................$47.95 1903 handguard NM .................$100.00 3 for ................................ $11.45 SPF248 3. M1903A3, New, G.I., 4 groove ..... $199.95 SPF130
PAGE 52 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
P17 & P14 ENFIELD GOODIES Great News!!! We are at the stage in our DUMOULIN MAUSER NEW ARRIVALS! RARE ’98
SUPER P-17 ENFIELD PARTS DEAL
Action project where we can again release a small quantity of the CONTRACT MAUSER SLINGS M2
component parts Brazilian M1908 detachable Sling Swivel,
All the best parts in a P-17… PLUS they are
all NEW ORIG G.I. parts! ‘98’ Mauser Hinged Trigger Guards fully machined from ‘bar stock’ – Manu-
For GEW 98 as well ..................$8.50 MSR324 www.e-sarcoinc.com
Proper parade sling loop for Brazilian 1908 to go 610.250.3960
Bolt, stripped, Firing pin, Ejector, Floorplate, factured from FN Mauser Prints and includes the guard floorplate release in with the butt swivel above .............$4.00 MSR193
Extractor
Value $107.00...OVER 50% OFF!!! P17087
the trigger guard. The guard screw configuration is 98 Mauser commercial
( no lock screws). These fit standard 98 actions. We saw one of these at the
Set of above MSR324 & MSR193, only MAUSER PARTS & ACCESSORIES
................................................$9.95 MSR415 See our website for thousands of K98 Parts!
$49.95 for a SET of 5 PARTS! If you’re a ‘Shot Show’ for $850.! These are a bargain at ................. $149.95 MSR584 Orig used Spanish Mauser Model
Or buy 5 SETS for $44.95/set! huge buyer, 1893 & M1916 rifle sling ..... $12.95 SLNG058
Or buy 10 SETS for $39.95/set! call Cholly! A Selection of Fabulous Dumoulin Sporter Bolts BACK AGAIN!! NEW PRODUCTION
Dumoulin Stripped Low Scope Bolt w/ Dished Bent Handle w/ checkered ‘98 MAUSER FIRING PINS NEW!
!! ONCE AGAIN AVAILABLE !! knob .................................................................................$99.95 MSR587 MAUSER 98K WWII STYLE SLING, We just produced
ITEM
A small lot of P14 (1914) Enfield Extractors – Mauser 98 Dumoulin Complete Bolt, standard 98 pattern. Complete w/ New MFR $14,95, 3 for $39.95, 10 for these out of the
We thought these were gone forever! new extractor, firing pin, and excellent condition ‘98’ parts $120.00 SLNG011 best 4140 steel - The good news is that we
......................................................................................$149.95 MSR594 redesigned the cocking piece knotches to fit
P14004 P14 Extractors original........$39.95
-For use w/ standard 98 trigger & sear. multiple manufacturing variations of the cock-
P14002 P14 Bolt complete ...............$99.95 Dumoulin Bolt, low scope commercial original complete bolt standard 98 pattern with MAUSER RIFLE CLEANING RODS ing piece. For years we have suffered pins and
new extractor, firing pin, and other parts ................................... $159.95 MSR603 1. 98K 12.5 inch rod, for most 98K
cocking pieces that wont fit together and hours
U.S. 1917 ENFIELD CUSTOM COCK Beautiful Commercial ’98 Mauser Bolt Sleeve – all milled from bar stock. FN pattern and G-43 rifles ..... $12.95 ea. CLN014
and hours of sorting for fit. Problem solved + a
and incorporates a Winchester Model 70 style safety (3 position), for use with standard 2. 98 K 10 inch, for early 98K
ON OPENING & SPEED LOCK ASSY , single, or double set triggers. In complete safety mode, it prevents a discharge. Others ................................... $12.00 CLN013 new 4140 pin ...................... $22.50 MSR431
Has a modified cocking piece & hi speed lock sell these @$150-$180. Sarco Special .................................... $125.00 Each MSR645 3. G33/40 Rod, Special length rod used
spring – mounted on a new firing pin only on the Czech Mountain carbines PROPER 8x57mm BORE BRUSHES
Note: use of this sleeve requires proper minimal fitting of your cocking piece & a very minor alteration to a
......................................... $39.95 P17051 standard bolt. Of course it works fine with a Dumoulin Bolt! made by the Germans as the G33/40 Bronze brush – 5 for ........ $6.95 CLN124
Also available for P14 ........ $40.00 P14010 ................................... $14.95 CLN016 Stainless steel brush for cleaning those
Special Dumoulin Sporting Adjustable Triggers – adjustable for trigger pull, trigger
4. VZ24 Rod, Correct length and diameter tough military bores 5 for
throw (travel), sear engagement, over travel & creep. Trigger body is made of steel
and not aluminum! Comes with proper angle cocking piece (important!) Minor fitting
rod for the Czech VZ24 rifles. Also cor- .......................................... $8.95 CLN121
required with all custom installations. These triggers sell for $60-$110. Without rect for G24 (T) rifle ..... $13.50 CLN018
cocking piece! Sarco Special with cocking piece & attaching pin 5. Chamber cleaning tool, wood
.....................................................................................................$44.95 MSR646 ......................................$3.95 CLN084 MAUSER STOCK MILITARY ISSUE
U.S.M1917 & BRITISH P-14 6. 121⁄2” rod for M98/43 Spanish 1. Israeli K98 handguard only
....................................... $19.95 MSR403
Some ‘Last Minute’ Dumoulin Spare Parts for Sale ................................... $12.50 CLN019
ENFIELD PARTS Bolt Stop assembly w/ ejector .....................................................................................$25.00 MSR614 7. Cleaning rod M93 171/4" 2. A – Select (very few only) 1908 Brazilian
Almost all parts are new G.I. Firing Pin....................................................................................................................$25.00 MSR647 ....................................$10.00 CLN049 long rifle stock ............... $85.00 MSR366A
P14003 P14, Bolt Stripped .............................$32.00 Firing Pin Spring........................................................................................................... $5.00 MSR648 8. Cleaning rod – Turkish model 38 3. 1908 Brazilian long rifle stock with
P14002 P14 Bolt, complete.............................$99.95 Extractor ....................................................................................................................$25.00 MSR649 Mauser & M98 ............ $11.95 CLN127 hanguard, Select ........ $100.00 MSR375A
P14004 P14 Extractor, original.......................$39.95 Guard Screw Bushing ................................................................................................... $5.00 MSR650
P17082 P14/P17 Firing Pin Spring, High Speed.. $4.95 9. M95 Mauser Chilean rifle 4. Steyer M1912 stock w/buttplate & bayo lug
Commercial ‘98’ Mauser Milled Follower & Spring ..................... $19.95, or 5 for $89.95 MSR582
P14007 P14, Floorplate .................................... $9.00 ....................................$13.50 CLN129 .......................................$39.95 MSR548
Commercial Dumoulin Set of Guard Screws ................ $8.95 (set), or 3 sets for $23.95 MSR583
P14009 P14, Follower, Milled ........................... $8.00 10. Argentine M91 & M1909 Mauser 5. Steyer 1912 Rifle Stock, good condition
P14008 P14, Magazine Box ............................$11.50 -Please note on Dumoulin Parts: These are new commercial and not military parts, and as such might ..........................................$10.00 CLN024 .......................................$49.95 MSR549
P14010 P14, Speed Lock ................................$40.00 require minor fitting 11. 1916 Spanish short rifle
P14013 P14, Stock and handguards with grenade
....................................$12.50 CLN136 Use above 1908 Mauser stocks to rework
launcher sight plate—4 only ....$195.00 ea. the 1908’s with cracked stocks currently on
P14005 P14, Striker (Firing Pin) .....................$20.00 MAUSER “20” ROUND “TRENCH” ‘98K MAUSER ACCESSORY KIT 12. Chilean M1935 short rifle
the market.
P14006 P14, Triggerguard..............................$15.00 ....................................$25.00 CLN131
P17016 Bolt Complete....................................$75.00 MAGAZINE $54.95 MSR167 Cleaning rod, Our famous K98 Repro sling, front
13. Swedish M1896 rifle....... $8.00 CLN020
sight hood. Value $55.00 ’98 MAUSER MILLED MILITARY TRIGGER
P17017 Bolt, stripped ....................................$37.50
Sarco Special $24.95 MSR365
14. Swedish M1938 carbine
P17068 Bolt stop assy, 4 parts w/o ejector.....$15.00
Check your local laws and/ ....................................$12.50 CLN021 GUARD ASSEMBLIES
P17041 Buttplate Assembly ...........................$14.95 15. Brazilian M1908 Mauser Complete guard with catch floor plate, follower
P17040 Buttplate Screw Large ......................... $3.50 or our website for mag
restrictions GERMAN K98(A) BOLT ASSEMBLY (ORIGINAL & ....................................$12.50 CLN026 & spring ..............................$34.95 MSR208
P17056 Buttplate Swivel Screw ........................ $4.00
COMPLETE) Rife with history in 16. GEW 98 Mauser WWI...$12.50 CLN025 Stripped trigger guard assy ..$23.95 MSR206
P17012 Ejector, original .................................$16.50
(see this page for guard screw sets)
P17043 Extractor ...........................................$24.50 ’98 MAUSER SPORTER RIFLE PARTS WWI & WW2, we have obtained a
P17034 Front guard screw ............................... $3.50 Steel hinged trigger guard small batch of these bolt assemblies
P17036 Floorplate .........................................$10.00 $69.95 MSR326 in excellent condition. Nice and clean with markings BRAND NEW ORIGINAL 98 ’98 MAUSER FRONT SIGHT
P17038 Follower Spring ................................... $5.00 and the cross hatched underside bolt handle. The rifle
Single stage trigger & sear
P17039 Follower, Milled .................................$12.00
P17006 Handguard Ring ................................$10.00
assy. Note: this single stage trigger & sear was made in much smaller numbers than the Gew or
K98 rifles and most were found in units of Cavalry,
MAUSER STRAIGHT BODY COVERSBack Again!
takes the creep out of your trigger pull. New condition $6.50,
P17082 High speed firing pin spring................. $4.95
P17054 Lower Band Asembly .........................$10.00 $6.50 ea. MSR205, 3 for $18.95
Pioneers, Artillery, and to a lesser extent ‘Storm Troop-
ers’. These are exceedingly difficult Bolts to find. While
STRIPPED BOLTS 3 for $17.95 MSR153
P17083 Lower Band new, original ..................$15.00 Low scope safety – for scope mounting on 98 they last!.......................................$175.00 MSR637
Just in the door as I am writing this. The
P17037 Magazine Box ...................................... $9.95 Mauser scoped Sporter. Fits & works on standard original FN production. These came out of
P17035 Rear Guard Screw ............................... $3.50 military bolt sleeve $17.75 MSR162 the FN Factory in a buy of left over parts
98 MAUSER 8x57MM STRIPPER CLIPS
P17004 Stacking Swivel ................................... $9.50 GERMAN WW2 MAUSER G33 /40 Steel 5rd .............................. $2.00 STC013
in the warehouse. Unnumbered. Never in a
P17052 Stacking Swivel Screw ......................... $4.00
K98 MAUSER HANDGUARD NEW! FRONT SIGHT HOOD Original brass few only ........ $3.00 STC028
P17018 Striker (Firing Pin) .............................$18.00 ITEM
NEW
ITEM!
gun. $49.95 MSR517
Beautiful new hardwood ‘Scarce as Hens teeth’, so we
P17031 Triggerguard .....................................$20.00
handguard ready to replace decided to make these from an Extra Special – our new ’98 bolt a new
P17053 Upper Band ......................................... $9.50
P17046 Rear handguard walnut new G.I. .......$35.00 that old worn out handguard! original. Ridiculously expensive when you can find extractor and a new
M98 MAUSER TRIGGER GUARD
one, ours is every bit as good as the original sight
P17047 Rear handguard walnut used G.I .......$25.00
P17062 Rear handguard hardwood, new G.I. .$25.00
............................................... $14.95 HNGD42
hood and at a price we can all afford! firing pin HINGED
P17063 Rear handguard hardwood, used G.I .$20.00 ................................................. $24.95 MSR633 ...... $79.95 MSR518 $69.95
P17044 Front handguard walnut new G.I.......$22.00 K98 MAUSER BARRELS – NEW! NEW!
ITEM MSR326
P17045 Front handguard walnut used G.I .....$18.00 Sarco is proud to offer K98 barrels, new
CURRENT MADE PERFECT COPIES OF WWII GERMAN HOODED BOLT SLEEVE
P17061 Front handguard hardwood, new G.I .$17.00 in the ‘white’, in 8mm. These barrels are
P17060 Front handguard hardwood used G.I .$15.00 shallow chambered and four groove. They are from a K98 MAUSER SNIPER RIFLE TURRET SCOPE MOUNTS ORIGINAL NEW K98 MAUSER RIFLE ‘CASTING SET’
small overrun production of barrels that were precisely
See our website for all other P17 & P14 parts
manufactured with military dimensions for German
We also made these with an open top ring for easier scope mounting. COMMERCIAL FN MADE Another of our excellent ‘sporting trig-
MSR545 Low turret scope mount assembly with closed rings
sniper rifles. Great opportunity to obtain a new K98
...................................................................... $140.00 $175.00
(FROM THE 60’S) ger guard project’ cast alloy parts sets!
barrel or rework your old standby rifle or project gun. Note: These are original
K98 MAUSER SPARE PARTS KIT Very limited. K98 Barrel in 8mm ........$95.00 MSR631 MSR544 Low turret scope mount assembly with split rings
...................................................................... $143.20 $179.00 FN milled from BAR stock
Set includes trigger guard, floor plate,
Been out of these for a followers long & short, spacer, catch &
while. Now’s a great time Please Note: Base screws are not included. This is a price you can – current offerings are
to pick up a pack of these
MAUSER RIFLE BARRELS VARIOUS MODELS afford – Originals are out of sight. castings. spring. Magazine well, catch and trigger
1. Kar 88, 8x57, original used, with good bores. slots are open already so it’s an easy set
original parts before they Finally available
171⁄2" .................................... $50.00 MSR096
are gone again! Contains:
with hand pick bores......................... $75.00
again, hooded bolt to work with. These are ‘hinged’ trigger
EJECTOR, FOLLOWER, sleeve for use with
MILLED, TRIGGER
2. Rare Argentine M1909 Engineers
trigger mounted
guards. There may be some flashing to
Carbine barrel – bores vary .. $49.95 MSR512 remove along the edges and screw holes
SEAR, SAFETY, FOL- safety mechanism. These are
LOWER SPRING, SEAR SPRING, BOLT SLEEVE,
98 MAUSER TACK DRIVER HEAVY BARRELS
the type used on all of the high will need to be drilled. Very Limited.
FIRING PIN, FIRING PIN SPRING $29.95 MSR370 quality Mauser sporters. Our
VALUE $65.00 We took some of our fabulous Swedish 8mm sleeves are original F.N./Belgium
................................. $19.95 MSR626
heavy barrels manufacture, left over from their
blanks – had them threaded for 98 Mauser ac- FALL NEW!
production of Mauser Sporters ITEM
GERMAN WW2 ZF39 SCOPE tions. These have a nice heavy profile and are 1
3/16" at chamber and 15/16" at muzzle. Length
closed ring low turret SALE Open ring low turret several decades ago. We found
MSR545 20% OFF MSR544 a small cache of these desirable
MOUNT is 22 3/8". Our barrel maker commented “I would hooded bolt sleeves at the FN
New and accurate manufac- be proud if I made a barrel of this fine quality” – plant and bought them all. All
tured Scope Mount as used These are fully chambered but of course still need Also have VZ24 STOCKS, NEW, ORIGINAL are beautiful polished steel, new
by the Wehrmacht & SS from to be headspaced by a competent gunsmith $125.00 VZ24001 condition
1941-1945. Improved last model ................................................ $79.95 MSR553 ................$49.95 each MSR119
mount with the top lock
See Our Website — www.e-sarcoinc.com
PLEASE NOTE:
screw,2 pins and extra These barrels have a slightly deep chamber for a reason. 98 MAUSER GUARD SCREW SET
long locking lever. Set up If you have a shallow chamber, you will need to use K98 RIFLE STOCK DISC MSR372 – Military set w/lock screws used . $9.75
with 27mm rings. If you a chambering reamer to adjust headspace. With this Usually inserted in the right side of MSR373 – Military guard lock screw set new
need for a 1” scope, we method you can adjust head space by turning back the Mauser stocks in the 1930s and in Check our website for a fabulous assort-
shoulder and breech a bit to accommodate the head-
..................................................... $3.50
can include shims at no Garrison rifles of the Home Guard ment of ’98 Mauser trigger guards over
space dimension. This also solves any variance from the
charge, but you must ask! Perfect for creating a through the early war years. Would ID mfg., date,
chambering reamers pilot and the throat dimension in 98 MAUSER COMMERCIAL GUARD SCREW SETS 35 variations – we had a big sort! Have
WWII German Sniper Rifle ......$199.00 MSR401 the reamer. No need to buy a chambering reamer. serial # .........................................$4.95 MSR596
Commercial set, new .......................$6.95 MSR158 over 30 varieties of Bolts, too!!
M98 MAUSER BOLTS SEE OUR WEBSITE FOR THE FULL MSR404 Bolt stripped, straight handle MSR142 Floorplate new orig, unnumbered HNGD34 Handguard 1908 Brazilian long rifle
......................................................$43.50 ......................................................$19.95 ........................................................ $19.95
Complete bolt assembly with firing pin, extraction,
bolts sleeve, etc. Standard length ’98 bolt, fits
SELECTION OF ‘98 MAUSER PARTS MSR123 Bolt, complete straight handle MSR146 Follower (milled) ............................... $8.00 MSR579 Israeli 1 leaf bolt stop spring ............. $9.95
MSR104 Band Retaining Spring, front GEW 98 ......................................................$79.95 MSR147 Follower (stamped, WWII) ...............$17.50 MSR162 Low Scope Safety ............................$17.75
German 98K, Czech VZ24, Argentine ’09, etc. Gew .......................................................... $4.00 MSR125 Buttplate (cupped) Israeli ................. $7.50 MSR148 Follower Spring ................................ $4.00 MSR129 Lower sling swivel, detachable, 98 WWI GEW
98 style bolts. Good, original condition MSR105 Band Retaining Spring, rear GEW 98 MSR126 Buttplate (flat) .................................. $8.00 MSR151 Front Sight ....................................... $4.00 ........................................................ $8.50
............................................$79.95 ea. MSR123 ........................................................ $4.00 MSR127 Buttplate Screw................................ $1.25 MSR153 Front Sight Hood, 98K ...................... $6.50 MSR193 Parade sling loop swivel, original 98 WWI
MSR106 Band Spring (98K) ............................ $7.00 CLN014 Cleaning Rod 12 1⁄2" M98/43 MSR155 Front Sight Protector VZ24 GEW ................................................ $4.00
MSR096 Barrel KAR88 Orig Used 8x57 171⁄2" small ......................................................$12.95 ......................................................$10.00 MSR415 Combination of MSR129 & MSR193
MISC. 98 MAUSER ITEMS ring ................................................$50.00 CLN025 Cleaning Rod 15" GEW 98 MSR157 Guard Screw Bushing ...................... $2.00 ........................................................ $9.95
1. Original Argentine SOM sniper scope w/base & MSR304 Barrel, Verguiero 8x57mm 23-3/4” Small ......................................................$12.50 MSR150 Guard Screw, Front (military) MSR175 Rear sight & handguard screw VZ24
leather case ..................................$3495.00 Ring, New .......................................$75.00 CLN018 Cleaning Rod 15" VZ24/G24(T) ........................................................ $4.00 ........................................................ $4.00
2. Rare M98/43 La Coruna Spanish MSR097 Barrel KAR88 Original (hand picked bores) ......................................................$13.50 MSR158 Guard Screw Set (commercial) New MSR180 Rear Sight Sleeve ...........................$15.00
muzzle cover ............................ $9.95 MSR217 8 x 57MM 171⁄2" small ring..............$75.00 CLN013 Cleaning Rod early 10" ...................$12.00 ........................................................ $6.95 MSR185 Safety ............................................... $4.25
3. M98/43 Handguards, replace your MSR114 Bolt (complete) turndown handle . $125.00 CLN049 Cleaning Rod M93 17 1/4" ................$10.00 MSR158(A) Guard Screw Set (commercial) Used MSR149 Screw, Front (commercial) New
cracked one .......................... $16.50 MSR216 MSR115 Bolt (stripped) turndown handle .....$75.00 CLN074 Cleaning Rod Stock Nut.................... $5.00 ........................................................ $5.00 ........................................................$3.50
4. VZ24 Mauser new original stock disc ... $4.95 MSR117 Bolt Sleeve (new) ............................$12.00 MSR135 Cocking Piece ................................... $7.00 MSR373 Guard Lock Screw Set, (military) new SLNG010 Sling GEW 98 (WWI Style)
3 for ..................................... $12.50 MSR523 MSR118 Bolt Sleeve (used) ............................. $8.00 MSR136 Ejector ............................................. $5.00 ........................................................ $3.50 ..................................................... $16.95
5. Original Israeli K98 grenade launcher, like new MSR120 Bolt Stop (stripped)........................... $7.00 MSR138 Extractor ........................................$19.95 MSR372 Guard Screw Set w/Lock Screws (military), STC013 Stripper Clips (8mm, 5 rd)
MSR121 Bolt Stop Assembly ........................$17.50 MSR139 Extractor Collar ................................ $8.00 Used ................................................ $9.75 ........................................................$2.00
............................................. $49.95 MSR575
MSR359 Bolt Stop for 1909 Argentine stripped MSR141 Firing Pin Spring .............................. $3.75 MSR159 Handguard, K98 (beechwood, used, orig) MSR208 Trigger Guard Assy, milled military
6. Orig Yugoslav, 98 & M48 etc Mauser oiler
......................................................$14.95 MSR514 Firing Pin Yugoslav ’98 Mauser ......................................................$15.00 ..................................................... $34.95
................................................$4.95 MSR576
MSR434 Bolt Stop Screw, new ........................ $2.00 ......................................................$30.00 MSR161 Handguard used walnut K98, orig. MSR206 Trigger Guard Assy, stripped
7. Rare original 1904 Portuguese Verguiero front MSR122 Bolt Stop Spring .............................$12.00 MSR143 Floorplate (used)............................... $9.00 ......................................................$18.95 ..................................................... $23.95
sight cover, new .......................$9.95 MSR591
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 53
O2 ZELTBAHNS GfififififififififififififififiGfifififififiWW2fifififidfifififihfidfififififi
fififififidfifihfifihfifififififidfifififififipfififihfi,fifihfififififififififififififi,fi ALSO, SPLINTER ZELTBAHNS
ARE RAINWEAR, fififififififlfigfififififififi,fififidfififihfifififififififififififififififififififififihfifi ARE NOW AVAILABLE!
50 Hilton Street, Easton PA 18042 TENTS, fififidfififififififififififidfifiBfifihfififififi‘Ofifi’fififififififlfigfifififidfi Ofififi
www.e-sarcoinc.com / STRETCHERS & fifififi“fipfifififififi”fififififififlfigfifiZfififibfihfififififififififififififi-
610.250.3960 Fax: 610.438.2548 Splinter
CAMOUFLAGE fibfifififififififififififififidfififififififigfifififififififififififipfififififififififiBfifififi
pfifififififififififidfififififififififififififififififififififififififidfibfififi
Camo
FOR THE WW2 Zeltbahn…fi
ORDERING INSTRUCTIONS GERMAN
pfififihfififififififififipfififiZfififibfihfifififififififififififigfifififigfifi
fififififififififififififififififipfifipfififi!fiNfififififififi
~fiThfifififififififidfififififififififipfifififidfififififififififi NEW $64.95,fi
OfidfifififigfiPfifiTfififififiOfidfifififigfiFIfiEfififififi~ SOLDIER OfififiOak Camo Zeltbahn ITEM! fifififififi$177.00
PHONE ORDERfi–fiCfififififi6fifififi2fifi-fi96fi $64.95fifififififififififififi$177.00 MISC627 MISC626
ONLINE ORDERfi–fiGfififififi
fifififiE-fifififififififififififi
FAX ORDERfi–fi MLE-49 FRENCH INDOCHINA & WINCHESTER 97 TRENCH GUN BAYONET
6fifi-2fifi-fi96fifififixfifififififihfifififififi ALGERIA BUSH HAT
6fifi-2fifi-fi962fififixfififififigfifififififififi
fififififi:fi
LUG & HEAT $113.95
fififixfififififiFFLfifihfifififi
6fifi-fififi-2fifififififixfififififififidfififidfipfififififififi fi-fififi,fifi-fifi2 SHIELD W/ W97058
MAIL ORDERfi–fififififififiIfifi,fifififiHfifififififififi,fi
EfifififififiPfifififififi2 29.95 MISC431
SCREWS
SHOWROOM VISITfi–fifififi-fifififififififi-fipfifififi
FfifidfififiOpfififidfifififififipfi
Ffififidfifififififififififififififihfififihfifififififi,fififififififibfififififi
U.S. MILITARY ‘ADVISORS’ BUSH HATS U.S. MANUFACTURED
CUSTOMER SERVICEfi–fififififi@fifififififififififififi
PARTS QUESTIONS: pfifififi@fifififififififififififi,fifi TEXT fififififififififififidfififififihfififififidfi- ‘GRACE’ GUN SMITH
MACHINE GUN QUESTIONS:fi 22828 fififififififififibfifififififififififififififififififififififi SCREWDRIVER SET
fifififififipfifififififififififififififififigfihfi Wfi’fififififififififidfifihfifififififififi
figdfififi@fifififififififififififi and fifififififidfifififihfifihfifiFfifififihfi dfififidfifi!fiWhfi?fiThfififi
PfifififififififififififibjfifififififififihfifigfififififihfifififififififififififiWfifififififi Join FfifififigfifiLfigfifififiBfifihfiHfifififififi fififififihfifibfififififififififidfififi-
om
fififififififipfifififibfififififififififipfigfifiphfifififififififififififififififififipfififififi
Our fififififififififififififihfififififififififi96fififi fififififififififidfififififififififififififififi wro
fififififififififififififififififipfifidfifififififififipfifififififififififififififififi UfififififidfifififififififififififibfifiPfifififi- Gfifififififihfifififififififidfipfififififififi Sho NED
Email E
fififififidfifi dfifififiKfifififidfififififiVfififififififi fifififihfififififififififififi!fiVfifififi OP daysek
List! fifidfifififidfififidfififipfifidfififidfibfifi pfififififififififififififififififififififififi2”,fi 6 we
SHIPPING fififififififififiVfifififififififififififififififififi hfifififififigfifififidfifififihfifihfifififidfi a
fiLLfiOfiDEfififiWILLfiBEfifiECEIVED,fiPfiOCEfifiEDfifiNDfi fifififiGIfififihfififighfififififihfifififififififi bfifidfifififihfififififififihfifidfififidfi
fiHIPPEDfiOUTfiOFfiOUfifiPENNfiYLVfiNIfifiLOCfiTIONfi Hfighfififififififififidfidfifififigfifihfifi fififififiCfifi2-fi6…fififififidfifififififi
fiINIfiUfififiHIPPINGfifiNDfiHfiNDLINGfiCHfifiGEfifi fifififififidfifififififififififipfifififibfififi fififihfififi‘FfififififififiGfifififififififi’,fi
fiTfifiTfifiT:fifi9fififi fififififidfifififigfifififififififififidfifi!fiThfifi fifififififififihfipfififififififififi,fifififififi
fififlfififififififififififidfiBfifififififi…fifififi2fififi hfifififififififififififififififififififififififidfi fihfifififififififififififififififiThfifififififi
WW2 KOREA ERA P44
Cfififififififififififigfifififififififififififipfifipfifidfififidfififi NEW! pfififififififififififififififififififififibfifififi pfifififidfifififififififififififififihfifidfififi USMC CAP
*fiNJfififififidfififififipfififififififiddfifi%fififififififififixfifiNfififififififififififififi ITEM jfififififififidfifififipfifififififififififififihfifi fifififigfifififififihfifififififififififififi Nfififififififififi:fi
fifififififibfifififififiNJfififififidfififififi
*fiPfifififififidfififififipfififififififiddfi6%fififififififififix fifififih,fifififipfifig,fifififififififififig- fidjfififififigfifififififipfififififififififififighfifi fi-fififi,fifi-fifi2,fi
fifififififidfifififififififififififififififidfiHfififififififihfippfidfififififiUfifififififi,fi gfidfifidfififififififififihfifififififififififififi fififififififififififififififififififigfifibfififi-
fififififipfifififififififiCfifififififififihfifififififigfififififififififififififififibfififififififihfifipfifififidfifififififififi fififififififififififififififififi%fififidfififififi
fi-fififi,fifi-fififi
fififififififififififififififififipfifififififififififififiqfifififififiBfififififififififidfiLfibfififi
UPfififififififififififififibfifififififififififififififififidfifififififiEfipfififififififififififi fifififififibfifi:fifi-fifififi,fi-fifi2fi,fi-fifififi,fi-fifififi,fi-fifififififiVfifififififififidfififififififiHfifi fihfifiUfifififi$39.95 TOOL014 $18.95
fififihfififififidfifififififidfifififipfifififififififififififidfifififififififififififidfififififihfififi No returns on tools. MISC495
fidfifififififififififififi $34.95 HAT06
Please note: fififififi’fififififipfifififibfifififififififififigfifidfifi NEW!
fihfippfidfififidfififihfififififififififififififififififidfififififiLfififififififi ITEM
dfififigfidfififififififififififififihfififififipfifififibfifififififififififihfififififififififi
COMES WITH A NEW BARREL!
fififififififififiWfifififififififififififififififififififififififififififififififififififififi A $75 Value!!
fifififififififififififififififififififi
.S. G LL
CODfififififififibfifififififififidfififififififififififififififififififidfidfifififififi
fifififififififi’fifififififififififififififibjfififififififififififi%fifififififififififigfifihfifigfififi
A L U A TURKISH MAUSER RIFLE OIL FUNNELS
fifi2fifififififififififififififififififififidfififififififififififififififihfifipfifififififififififififi,fi
GIN BASEB ES
fifififififififififigfifififififififififihfifififififififififififififififififihfififififififififififidfi
ORI A D 32
Ofifigfififififigfifififififififififififififidfifififififififigfifififififififififififififififififififififififihfifidfifidfifififififififigfi!fifififififidfibfifififi,fifi
@fififi”fihfighfififidfififihfifififififififi+fifififififififififibfififififififififififihfififififififihfifififififififififififififififififififififififififififififi
bfifififihfififififiFfififipfifipfifififififififififififififidfififififififi,fifififififigfififi N
pfifififififihfififidfibfifififififififififidfibfififififififipfifififififigfifififififihfi-fififififi GRE AM0 / .95 local
fifififidfifififififidfifififififififififihfififififififififihfifififififififififi!fiThfifififififififidfififigfifidfififififififififififihfifififidfififififihfififififlfifi
fififififififififidfifififidfififififififififififififihfifififififififififighfififiThfififififififififihfififi@2fifififififififidfififififififi,fifififififihfidfifip,fi
$19 check
fifififidfififififififififi:
u
e yo .
fifidfifififififififidfifififihfifipfiflfifihfififififififidfififififififififififihfififighfifihfifibfifififidfifififigfifififififififigfifiGfifififififififififififihfi
DISCLAIMER: Pfifififififififidfibfififififififififihfififidfibfifififififififififidfifififififi ( sur fihfifibfififififififififidfififififihfififlfifidfififififidfipfifififififidfibfififififipfifififififififififififififififififififidfififi
S
ake eal U. !
bfififififififipfifififififigfifififififihfifiThfifififipfifidfifififififififififififidfifififi
st o m
)R ade
Wfifihfififififihfifififififififififififififififififififibfififidfifififififififififififighfififififififififidfibfifififififidfififififififi,fifififififififififidfibfifififi:
IT
fififififidfifififihfifififififififififififififififiNfififififibfifififififififififixpfififififidfifififi
t e law is item Gren fifififififififififififififififi‘fi’fifififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififi VIS
fifipfififidfififififidfififigfififififififijfififififihfifihfifififififififififififififififififihfifi sta wn th Inert Bfififi9fifififififififififi9fiKfiWWfifififififififi,fifi9fi,fifi&fififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififi$9.95 MSR300B
fifipfifipfififififififififififififififififififififififififififihfifififipfifidfififififi can
o
G.I
. Cfififi9fifififififififififiTfififififihfifififififififififi9fifi9fififi9fififi&fififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififi$9.95 MSR300C US o
Dfifififififififififififififififipfifififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififififi$24.95 MSR300D rc
ABOUT HIGH CAPACITY MAGAZINES: @Sa
fififihfifighfififififififififififififififififibfififififififififififififififififififififififigfififi o n
ok
fifififi,fififififififififihfififififififififififififififififihfifififififi2fi,fififififififififififififihfifi ebo
bfifififififiBfifififidfifififig,fififififififififififififififigfifihfifififififififififififififipfifi- U.S. NAVY 1950'S DRONE AIRPLANE Fac
fifigfifififihfifififififiLfififififi&fifififififififififififififififififififififififififififififififififigfifi
fifipfifififififififigfififififififififififififidfififififififiIfifififififififififififififififififififi
fihfifififififififi,fifififififififififififififiLfifififififififififififififififififififififififififififififi
BEECHCRAFT MODEL 1001B.
Tfifibfififififipfifififihfifigfifi
fififififififififififig
CLAYMORE MINE AND CARRY BAG W/ &
@Sa
rco
fifififififififififififihfifififififififififififidfifiThfifififififififipfifififififififififififififififififififififi
fififihfifififififihfi-fifipfifififififififififififififififififi:fiNJ,fiNY,fififi,fifiD,fiHI,fi
Kfi,fiCO,fiCT,fiILfififidfifififififififififififififififififififififihfififififififififififidfifigfi
Chfififigfi,fiDfiCfifiMAGAZINE SALES IN CONNECTICUT - Ufififififi
fi2fififififififififigfifipfifi
fi26fiHfiPfifififigfififi
$4995.00 MMP008
INSTRUCTIONS (INERT) on er
Twi
tt
fififigfififififififihfififififififififififififififififififififififififihfipfiNOfififififififidgfifi Dfifififififidfipfifififififififififififififififififibfifififi IfififififififipfifidfififififififiCfifififififififi
fifigfifififififi,fifififidfifigfidfifififififi,fifififidfifififififififiCfifififififififififififi fififidfifififififififiqfififififififififififififi@
Wfififififififibfififififififififidfifififififififidfifififififidfififififigfifififififififififi fifififififififififififi
fifififififififihfifififififififigfibfigfifififihfi
hfifidfififififififiFFLfi fifififififipfifififififififififififififififififi
ATTENTION – EASTON SHOWROOM CUSTOMERS fifififififififigfififififidfifipfififififififi
fifi:fiIfifififififififiIfififififififififi-fiWfifififififififidfifififififififififififififififififififififififi
fififififififififififififiEfififififi,fiPfififihfifififififi,fihfifififififififififihfifihfififififififi U.S. MILITARY FLECHETTES PACK fifififififififififififififi!fiCfifififififififihfi
Hfififififififififififififififidfifihfififighfifihfifi
fifififififififififififififififififififififififififi,fifihfififififififififififififififififipfifififibfifififiIfifi
fifififififififipfifififififigfififififififififififigfifihfififihfifififififi,fipfififififififififififi figfififififififidfifififififi,fifihfififififififififihfifififigfiFfififihfififififi
fififidfifigfififigfifififidfififififififififififififififi
fifififififififififififififihfifidfififififififififififififififihfififififififififififififihfifififififififififi DfififififififififififihfifighfififififififififififidfifififififiBfifihfifififi hfifidfififififiIfifififififififififififiVfififififififi
fihfifififififififififidfifiIfififihfifififipfififififififififififififififififihfififihfifififififi,fifififi fifififififififififififififififififififihfifififififififififififidfififippfifi,fifififi
fifififififififififigfififififihfififififihfififibfififighfifififififififififififififififififihfififififi fififififififififififigfififififififi2fififififipfififififihfifihfihfifidfififibfifififi
&fifififififififififififififififififidfififififififififi
fififififififififififipfififihfifififififififififififififififiPfifififififigfififififififififififififififififififififi fififififlfifihfifififififi$4.95/2oz pack (100+pcs) fififififififi!fiLfififififidfififififififibfifififififi
dfififi’fifififififififibfififififififififififififififififififififififihfifififififififififififibfififigfifihfifi
MISC288 fififififiBIGfifihfififififififibfififififiPOUND!!fi1 fififififififififififififififififi$69.95 MISC589
gfifidfifififififiPfifififififififififififihfifififihfifipfifififififififififihfifigfififiNfifififififififi
dfifififififipfifififififififidfififififififififibfififihfififififififipfifififififififififififififififi
LB/$24.95 MISC307
fihfifififififififiWfififififififififififififigfififififififififififififififihfippfifigfifixpfififi-
fifififififififihfifififififipfifififififififififidfihfifififififififififififififipfifififibfififi
PLEASE NOTE: Please, REGARDING LOCAL, CITY & STATE REGULATIONS!
RETURNS Wfififififififififififi-dfifififififipfififififififipfifififidfififififififififififififififififififihfifidfififi,fifixfifipfififififififipfifififififififidfifififififififififihfifihfi do not send us your origi-
fififififififififififififidfibfifififiIfifififififihfifififififififififihfifififififififififidfi“fifi-fifi”fifififififififififififififififibfifififiTfififififififidfififififififififigfidfififififififififififififififi fififiCOfifififififififififififigfififififififififififififififipfifibfififififififififififififififi&fififififififigfififififififififiWfifihfifififififi2fi,fififififififififififififihfifibfififififi
nal parts for comparison. fihfifififififififiHfififififififififififidfififipfifififibfififijfibfififififififififififihfifipfifidfifififififififidfibfififififiCOfififififidfibfififififififififififidfififififififififififififi
fififififififibfifififi
We are not responsible fififififififififififififififi,fifihfififififififififififififififififidfififififififififififififiThfififififififidfifififififidfi,fibfififififififibfifififififififidfififififififififififi,fififififi,fi
· PHONE ORDERS, EMAILED, FAXED OR MAILED-IN ORDERS:fifiYfififififififififififidfififififififififififififihfifififififififififiNfifibfififififififififififififi pfifififi,fihfighfififipfififigfi,fifidgfidfifififipfififi,fififififigfififi,fifififififiYfifififififififidfifififififififififififififififighfififififipfififihfififi,fifififi,fififififi
for lost, damaged, or
fififififihfifigfifiPfififififififififififififififififififi@fifififififififififififififififififififififi6fifififi2fifi-fi96fififixfififififi fififififififififififipfifififififipfifidfififififififififififidfibfififififiCOfififififififififijfifififidfifififififififififififififififififififififififififififififififififififififihfifigfifig,fi
misplaced parts in
fififififififiTfi#fifiFfififififififififififififihfifififififififihfififififififififififififififififififififififi,fifififidfififififififififififidfi fififififififififififipfifififibfififififififififidfifififififififififififififipfifidfififififififipfifihfibfififidfibfifififififififidfifififigfififififififififiCOfifiYfififififififififififi
transit or upon receipt.
· ONLINE ORDERS: Pfifififififififififififififififififibfifififififififififi-fififififififififififififififidfifififififififihfififififififififiPfifififififififififififiFfififififififififihfifipfififififibfififi Please include only a bfifififidfifififigfififififififififiCOfifihfififififififififififififififigfifififidfififififififihfifififififififififigfififififififififififififififififififififififidfifififigfififidfififififi
fififififififidfififififififififibfififififififihfifififififipfifififigfififiFfififififififififififififififififififififififi-Cfifififidfipfifififififififififififififififi@fifififififififififififififififi picture and dimensions
fififipfifififigfifififihfifififififififififi,fifififififi,fififidfififidfififififififififififiPfififififififihfifififififififififififififififififififibfifififififififidfifififigfifiLEGAL
fihfifififififififihfififififififififififififififififififififififififififififififififi6fifififi2fifi-fi96fifififidfifififififififibfifififififififififififidfififififihfififi-CfifififififififiDfipfifififififififi ADVICE????? PLEASE, DO NOT CALL SARCO for legal advice on guns.fiWfifififififififififififififigfififififififififidfi
of parts needed for fihfififififififififififififififififibfifififififigfififififififififidfifififififififififidfififififififififififihfidfifififihfifififififififiCOfififipfififififififififififififibfififififififid-
We do not refund any shipping cost unless the error/problem causing the return is our fault. comparison. Thank you.
fifififififififififififibfifififibjfififififififififififi%fifififififififififigfifihfifigfifi fififidfifififigfifidfififififififififififiFfififiqfifififififififififififififigfififigfifififififififififififififififiggfifififififififififififififiTFfifiThat’s what we do.
PAGE 54 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
U.S. M1 CARBINE (NON-FIRING) Very accurate folding stock version of the Paratroop M1A1 carbine. Some
display piece and does
not require an FFL.
Very realistic looking with some Made in Italy. Model 1911 Blank Firing Pistol in
functional parts and magazine ..................................... $220.95 REP11 case with instructions and cleaning brush
functioning parts. This version is
the standard WW2 model w/o bayonet lug ................................................... $104.95 REP34
8mm Blank Firing Ammuntion, 50 rds in tin can
$218.95 REP07 .................................................... $23.95 AM189
U.S. G.I. GOVERNMENT SURPLUS WWI 1903 & WWII 1903A3 BROWNING HI POWER PISTOL ( NON
FIRING )
SPRINGFIELD RIFLES. NO FFL OR NICS REQUIRED Superb design makes
New Lower Prices! U.S. G.I. Government Surplus WWI 1903
Springfield Rifles.
No FFL or NICS required.
DISPLAY PISTOLS (NON-FIRING) this pistol one of the most
popular pistols to serve in
combat during the last century and
These rifles have been modified to prevent firing so they are
free to sell without any NICS check or licensing. Cleared by ATF as free to sell.
GERMAN P38 PISTOL (NON-FIRING) beyond. Slide cocks and hammer
From the outside you cannot tell these rifles have been changed except for a small
Issued to Wehrmacht troops in 1940, this pistol and trigger work in unison. Metal w/
weld spot on the cut off. These rifles are perfect for a gunroom or store display, became the regular sidearm of 3rd Reich Officers plastic grips like the original.Comes with
reenactors, enhancements for your military vehicle, or just WWI & WWII nostalgia. & some NCOs. Cheaper to produce than the Luger, Lanyard .............................. $84.95 REP37
A perfect gift for a youngster who is not old enough to have a firing military rifle. All parts function and it was light and effective. Even a half pound lighter
click perfectly except the bolt stop. than the Model 1911 and with an 8 rd. magazine. Our
* 1903’s have WWII style trigger guard and bands.
authentic looking non firing display gun looks and feels like the NEW!
PPK STYLE BLANK FIRING PISTOL
The modifications are to the bottom of the receiver ring and are not visible. This is your chance to acquire An ideal and realistic
an authentic original U.S. G.I. WWI or WWII in collectable condition without the burden of a gun pur- real thing. Slide can be cocked, hammer pulled and trigger squeezed with a ITEM
blank firing pistol
chase and at half the price of a shootable rifle. distinctive click. A classic display piece in metal with black plastic grips like that feels and looks
Note: These rifles are not the rough guns as they came out of the arsenal as some sell. Each gun is built up the original. We have two offers: 1. P38 non firing pistol .......................$72.95 REP05 just like the sidearm
in our shop. Not for sale in PR, NY, MN, WI, KS, CT, MA or CA. 2. P38 pistol with our WW2 dated hard shell holster ............................$87.95 REP15 carried by German
Great for use at reenactments or military vehicle events as there are no security concerns. agents, Military
These guns are not thrown together out of reject parts as some others offer. All parts are in excellent Officers, James
condition and exposed barrel and receiver have been reparkerized. These are quality guns and come Bond, CIA, and other
from original G.I. surplus rifles. A few parts are current blue print production to enhance the rifles ap-
pearance. Rear sight is a military looking newly made fixed aperture rear sight. Get yours now while still
GERMAN MAUSER C96 PISTOL notable fictional & non fictional characters and
organizations! Slide cycles with hammer and trig-
available. Limited supply. Full size non firing display gun manufactured ger. Magazine depresses and is easy to load with
in metal with wood grips. This replica is very 8mm K blanks. Gas is vented upwards upon firing.
1903A3 SPRINGFIELD - WWII Pistol comes with instructions, case, and cleaning
SPF297 with brand new C type pistol grip stock ..................................................................... $399.00 well made and features a cocking mecha-
brush. No FFL required. Made in Italy. PPK Style
SPF295 with orig G.I. arsenal rework stock............................................................................. $299.00 nism that moves and trigger that clicks when Blank Firing Pistol with case, instructions, and
Note: The beautiful ‘C” stock alone in SPF297 has a value of $150.00
SPECIAL ADD ON FOR YOUR SPRINGFIELD RIFLE BUY
cocked. Also comes with a lanyard. cleaning brush.
..................................................$89.95 REP35
Proper WWI or WWII sling, cartridge belt, front sight cover and oil & thong set. Value $65.00. Special .............................................. $89.95 REP24 8mm Blank Firing Ammunition, 50 rds. in tin can
with purchase of a rifle .....................................................................................................$39.95 SPF383 ................................................$23.95 AM189
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 55
Airguns For Sale S3000
pins & bushing)--$48.50 shipped or Keller Enterprises, PO Box 563, Accessories For Sale S5200
AR-15/M-16, M-11/9 & HK--$33.50 PO Box 563,
shipped. All NFA Rules Apply. Order Safety Harbor, FL 34695. Safety Harbor, FL 34695.
AIRGUN REPAIR & SERVICE SHOOTING ACCESSORIES &
Factory authorized Crosman, Benjamin
online at www.ftfindustries.com or mail 727-726-2500. 727-726-2500. STOCKS for AKs, ARs, Shotguns 10-
to: FTF Industries, Box 1182, Hickory, www.stenparts.com
and Sheridan warranty service. We also
NC 28603 (cert. funds, M/C or Visa). www.stenparts.com 22s, Magazines, Clips for most
repair Daisy, Beeman and many other STEN MkII $30, STEN MkIII $35, Pistols. Weekly Sales, Discount Prices.
makes of pellet and bb guns. www.BlackGunParts.com Sterling $35, Yugo 56 $45; Receiver NEW uzi repair www.handgungrips.com
No firearms. Most repairs $65-$100. 618-483-3272
We buy used airguns and parts. Made in USA Tubes w/bonded templates made from section $77. Delivered
4130 Tubing. Correct OD/ID AMMO, Antique/Obsolete, in original
In business since 2005. BLUEPRINTS Shipping extra. leetoolandmachine.com boxes. Most American sporting calibers
ACCURATE AIRGUNS LLC American 180, AN-M2, Austen, Keller Enterprises, FG-42 PARTS For Sale. I also buy including obsolete rimfires. NO lists,
Ph: 360-656-5123 Berretta 38A, Bar, BMG 30, 50, PO Box 563, Parts for 1st & 2nd model available. reloads, military/foreign. Ray Giles,
Email: airguns@comcast.net Czech25, 383, FN-FAL, Safety Harbor, FL 34695. sigman@runbox.com or RTG Sporting Collectibles LLC,
Website: accurateairguns.com Hotchkiss, Kommando, 727-726-2500. www.stenparts.com 253-709-4907. 214-361-6577 www.rtgammo.com
Heckler & Koch (H&K) S3780 Lanchester, Mac-10, Madsen,
For Sale Mat-49 28-A1, M1A1, M3A1, STEN MARK II, III, N.E. WISCONSIN Class 3 Dealer
Ammunition For Sale S5220
will handle your Form 4 transfers.
BUYING, SELLING, PREBAN
M-16, M-37, M-203, MG-34, & V spring kits $20, NFA rules apply. Buy, Sell, Trade.
MP- 34, 38, 40, 41, Owen, PAF, 25/32/38/41 RIMFIRE AMMO; 25-
H&K's, MILITARY & PPSH-41, PPS-43, Reising, SIG-57, $5 shipping TMK Arms, 920-497-8478. 20, 32-20 AMMO. CALL 614-875-
ACCESSORIES. tmk1@new.rr.com
FRAN's H&K's
Sola, Star, Sten II & V, Sterling, KELLER 1902.
Suomi, Swedish K, UD-42, Vickers,
www.frans-hks.com Vigneron, Yugo 49, 56. $15 each ENTERPRISE Remington Rifles Wanted S4441 Antiques S5270
715-587-1930 - 906-863-5046 or 2/$25, Complete package $125. PO BOX 563
Email: sales@frans-hks.com MG-42 and M-14 are Buying Remington No. 1 SARCO, INC -MIG 21 jet fighter
$25 each. Make payment to:
Safety Harbor, FL 34695. Rolling Blocks & Hepburns in Long cockpit section from the DDR (East
Luger Handguns For Sale S4080 C. Shillig 727-726-2500 Range Creedmoors, Mid-Range, Short- German) Air Force. We have only one
PO Box 25932, Range and Schuetzen Target Models. single-seater. ATF will not allow the
LUGERS, P-38'S. Colo. Springs, CO 80936
www.stenparts.com 509-826-5512, import of military aircraft so this is the
wmem1a1@zandsindprecmach.com .50 BMG UPPERS, randyman@ncidata.com end. Ours was saved from the smelter at
Broom Handles, .50 BMG RIFLES
Nambus, Accessories, Military/Automatic Arms S4220
QUIET MUZZLE BRAKE
www.SHTF50.com
For Sale
German, Japanese, STEN MARK II & III
OUTRAGEOUS BOOKS & VIDEOS
War Relics. List $2. At: www.ftfindustries.com BARRELS, • We offer Custom Rifle Work
Hoffman, CZ24 REPLACEMENT Receiver New Manufacture, • Reduces recoil without large increase in
4105 Stephanie, Tube Section w/template. 4130 tubing noise level
with correct OD & ID $45.00 Original Length $45.00; • Makes guns
Branch, MI 49402. Shipping $5.50 AMD-65 extended user friendly
231-462-3594, Keller Enterprises, PO Box 563,
muzzlebrakes AK74 style • We offer
Safety Harbor, FL 34695. 5/8x24
863-291-3594. 727-726-2500 www.stenparts.com $27.00, Shipping $5.50 threads
Military Arms For Sale S4200 PPSH41 RECEIVER Section $50.00, each. Gentry Custom, LLC
PPS43 Receiver Section $50.00, 406-388-GUNS(4867)
CLASS II FULL AUTO DRILLING PPS43S Trunnions $30.00
KELLER www.gentrycustom.com
FIXTURES For MAK-90/AK-47 (w/ Shipping $11.50 ENTERPRISES,
PAGE 56 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
Rebluing, Stock Refinishing, and Gunsmith & Dealer S5560 270 Bighorn Dr, Estes Park, CO 80517
Antiques S5270 Gun Cleaning Supplies S5475
Repair. Better than New! Supplies Mercury Metal 99% $25/lb.
Big 45 Frontier Metal Cleaner. www.pmdgunsmithing.com BARREL LINERS: 17 Mach II, Shipping $15. Salow, 270 Bighorn,
the last possible minute. The single- Call 330-240-5960 to speak with your
seater will be missing the stick and Remove rust with no harm to blue, de- 22RF, 25-20, 32-20, 38-40, 44-40. Estes Park, CO 80517
lead bores in seconds. personal gunsmith. Satsifaction Guaranteed.
maybe some instruments. The cockpit Reloading Components S5800
was cut out of existing planes that were Since 1967. $6.00 postage paid. MASTER GUNSMITH Prices & info on website at
Box 90947, Sioux Falls, SD 57109. Full Line Gunsmithing www.redmansrifling.com For Sale
phased out of service. Single cockpit
MIG - $9000.00 MMP011. Order online Big45.com Custom Guns-Barrels-Grips-Stocks, SARCO, INC.- COMMERCIAL BRASS
Please call us at (610) 250-3960 to order Wood & Metal Refinishing. GUN STOCK LOTS FOR SHOW Once Fired Range Cleaned.
this item. These are oversized items. Gun Parts For Sale S5500 Check our website for More Services SALES! Fabulous opportunity to buy 9mm. $45/1000
Cockpit shipped via truck at our 55% & Information about our 'Bad-Ass' new commercial stocks & forends 40 S&W $45/1000
discount. See pictures of the actual Dan Wesson Parts And Barrel Sets. STUCK CHOKE TUBE for brand names like Mossberg, 223/556 $80/1000
unit and read more by visiting our Herb's Guns 541-851-0547. Oregon REMOVAL TOOL S&W, Ithaca, Marlin, H&R, Chuck. 623-341-9122.
website www.e-sarcoinc.com. Dealer. Tuesday thru Saturday. www.ricksplace.biz Winchester, Savage, etc. One lot of 15 Once fired military brass polished w/
rick@ricksplace.biz Stocks & forends with no duplicates primer pocket swaged
COLT Lightning Springs. One each
Rick's Place 501-658-7347 for $150.+Sh. Sell 3 pcs and your out of 5.56mm $90/1000 $45/500
Barrels For Sale S5280 of the following: Trigger spring, Hand
Spring, Strut Spring, Cyl stop spring, BARREL RELINING in .22 RF, it! Rest is profit. Multiple lots get better 308mm $160/1000 $80/500
CORSON'S BARRELS 1000 New, Ejector spring, $24.50 per set postpaid. 25-20, 32-20, 38-40, 44-40. Installing price! Great for gun show and store 9mm $50/1000 $25/500
Used, and Obsolete Shotgun Barrels. Poppert's, Box 413, Glenside, PA the finest liners, manufactured by sales. Sarco Inc. 610.250.3960 or visit Commercial 40 s and w $45/1000
Buy, Sell, Trade. 928-718-4282 19038. www.PoppertsGunParts.com Redman's. Professional Craftsmanship e-sarcoinc.com polished only brass or nickel.
Arizona. dccorson@citilink.net, Guaranteed. Established shop of 41 Commercial Winchester 223 cal
GUNSMITH'S Assortment: Screws, Knives & Bayonets S5640
www.corsonsbarrels.com Years. $105/1000 polished and unprimed.
springs, pins, 100 pieces, $14.50. We For Sale
Redman's Rifling & Reboring, John Dewar, 4520 County Home Road,
pay shipping: Poppert's, Box 413,
Clips & Magazines S5380 189 Nichols, Omak, WA 98841. BAYONETS; Send SASE for Paris, Tennessee 38242. Phone:
Glenside, PA 19038.
For Sale 509-826-5512. current Bayonets list. The 731-642-6525.
www.PoppertsGunParts.com
Prices & info www.redmansrifling.com BRASS MAN SHELLS
VEPR & SAIGA GUN PARTS: You name it. Steel Magnolia, P.O. Box 1658,
METAL MAGAZINES U.S. Made. Once Fired Brass, All Reloadable
Professional service since 1965.
BROOMHANDLE
Jackson, CA 95642. Calibers, Polished & Inspected.
Also, AK floor plates. See us at: General Parts List, $5. Traders Den,
CSSPECS .COM BARREL RELINING 817-834-5716
1655 Olson Dr., Cook, MN 55723. Militaria For Sale S5700
or Call 386-490-1102 Broomhandles to 30 Mauser using thbrassman@aol.com
Mail order or by appointment only.
the finest liners. Rust bluing POWDER, BRASS-BULLETS:
Original Clips for Old Guns, 218-666-5083. NAZI, JAPANESE -- ITALIAN
available. Guaranteeing the finest job Powder: WC844 (223) Virgin
Collector & Unusual, No Modern, Daggers, Swords, Medals, Hats,
Gunsmith & Dealer S5540 around. Established shop of 41 years. surplus 159.00, 4+156.99, WC860-
I have the Hard-to-Find, Documents, Standards, etc.
Services Redman's Rifling & Reboring, 69.00, 4+64.00, SALE WC872-WC867
No Aftermarket, Buying I buy collections, also interested in:
189 Nichols, Omak, WA 98841. 48.00 Surplus, Unfired Primed LC 223
765-546-8314 GUN BLUING Parts, Broken Daggers,
509-826-5512. Prices & Info: from ammo 500-79.99, 1000-149.99; 223
and RESTORATION Swords & Bayonets.
MAGAZINES FOR SALE www.redmansrifling.com LC military 60m , 45 Auto, Tumbled
Send $2 for Large List. Since 1963.
DPMS, AR15/M16, AKs, SKS, 10/22, firearmfinishinginc.com REAMERRENTALS.COM Mike Warren, P.O. Box 566, 1000-89.99, 308 LC Primed Unfired
Saiga, & other Shooting Accessories Bethpage, NY 11714. Brass, from ammo, 500-140.00; See
Weekly Specials. PMD Gunsmithing ONLINE CATALOG
web for other Military-Commercial
www.handgungrips.com Specializing in Firearm 400+ Calibers Available. SOVIET MILITARIA!
Brass: New and Fired
618-483-3272 Restoration Call (800) 996-0426. Trade & Buy.
BULLETS: 308 IMI M-80 147gr.
Send $3 for Catalog.
FMJ-500-89.00, Sierra 224-77gr.
RUSSIAN STORE
Special match 500-118.00, WOLF 224
7657 Winnetka Ave, Suite #203,
Apex Gun Parts Winnetka, CA 91306.
55 FMJ 1000-79.99, Hornady 224
55gr. PSP-FMJ 94.99m, Federal 223
818-999-1257.
55 FMJ m193 - 94.99m; 223 M855 62
Build. Improve. Repeat. Indian Relics, B.C. - arrowheads, FMJ -124.99; 223-M856 tracer, Military
APEX Gun Parts is your source for all the firearm parts you need. Check out just a couple of the parts we carry below! spearheads, axes, Civil War, more. Surplus-99.00m; 50 API Silver Unsized
Indian, Box 246, 289m, Sized 339m, 50 Tracer 279.00,
Independence, KY 41051. sized 329.00 See web for complete
50 Bullet List, plus WW-Remington-
Miscellaneous For Sale S5720 Hornady Commercial Bullets:
see web for current Prices:
Chloroform 8oz. $15; Potassium Brian McDonald
Dichromate $15/lb., Ammonium 74880 Johnson Run Rd.
Dichromate $15/lb. Shipping $15. Salow, Kimbolton, OH 43749
MADE IN USA
WWW.APEXGUNPARTS.COM
Price & Availability subject to change without notice. All orders must comply with all federal, state, and local laws-NFA rules apply S&K Scope Mounts
70 Swede Hollow Rd - Sugar Grove, PA 16350, 800-578-9862
Email: comments@scopemounts.com
www.scopemounts.com
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com , PAGE 57
Reloading Components S5800 Scopes, Rings & Bases S5840 Supplies are dwindling. Sarco Inc., Call Marshfield, WI.
Surplus Gear For Sale S5880
For Sale For Sale Dave or Mark: 610.250.3960 or visit B2 Shooters, Open to the public
e-sarcoinc.com Fri. 3-8 p.m., Sat 9 a.m.-3
9AM-5PM, RIFLESCOPES SARCO, INC.- FRENCH 73MM
p.m., Exhibitor tables 8' - $15.00.
330-833-4360 BAZOOKA: LRAC-50 bazooka
Browse Online Catalog at as used by the post war French in Gun Shows S6150 Admission $4.00, children 12 and
Fax No. 740-492-0063 under free with an adult.
Web: PatsReloading.com 4scopes.com Vietnam & Algeria. Never on the
Get Free Shipping! Info. Bruce 715-687-4741.
market before. Comes with shield and MANKATO, MN
optics, deactivated to ATF specs. Very OCTOBER 21-22
Quinetics Corporation! Stocks & Grips For Sale S5860 limited!
GUN & KNIFE SHOW
Reloading Supplies. Sarco Inc., 610.250.3960
NG TRAINING CENTER
Made In USA. ALUMINUM PISTOL GRIPS, SARCO, INC - RPG-2 ROCKETS 100 Martin Luther King Jr, Dr
www.quineticscorp.com Kimber Micro, Ruger 22/45, 1911 full, (INERT): Original Vietnam era Crocodile Productions
bobbed, and compact. Made in the rockets with the warhead removed and 763-754-7140
SARCO, INC - FLECHETTE USA! ROWDYUSA.COM replacement inert head installed. Great crocodileproductionsinc.com
DARTS: 1 inch long military flechettes for completing your RPG launchers!
in stock. Sold in 2 oz. and 1 lb. packs. CUSTOM WOOD GRIPS CENTRAL WISCONSIN
Hogue and Pachmayr Grips on sale Sarco Inc. 610.250.3960
Original USGI. Sarco Inc., GUN SHOW
610.250.3960 for Pistols and Revolvers. Stocks and SARCO, INC. - WW2 VEHICLE Friday & Saturday,
other Shooting Accessories. RADIO SETS: SCR 508, 506, & 528 October 27th & 28th, 2017
Reloading Equipment S5820 www.handgungrips.com radio sets with mounting bases. Perfect Oak Avenue Community Center,
For Sale 618-483-3272. for completing your military vehicle. 201 S. Oak Ave.,
ONCE FIRED Remington 3" Mag
ATTENTION
12 or 20ga $44.95/1000; Remington
12ga High Brass, New Type,
Compression Formed, $39.95/1000;
SKS OWNERS
Got slam-fire or uncontrollable full-auto problems or
SABOTS!
4,000 FPS out of your .30 caliber rifle?
Inner City Defense Pencil
* Portable, Concealable Unnoticable but Effective Protection for Men & Women
Federal or Remington 3 1/2" 12ga Mag question? Can’t use “soft-primed” American ammo? It’s possible with our sabots! You can load * Contains spring activated tempered carbon steel rod ground like syringe needle
$79.95/1000. All Prepaid up to zip Get explanation of firing pin/bolt issue, and “the and shoot .22 caliber bullets in any .30 caliber
cure”. Firing Pin Kit for ALL SKS rifles now available. cartridge. Our six fluted design enables * One handed operation • Moving parts silver soldered
57300. Others: Add 10.00/1000. * Made from high quality steel drafting tool. Used by many USA
Includes a new CNC machined 17-4 SS replacement instantaneous separation of sabot from the
Bob Kase, 3475 Palmyra Rd, Firing Pin and Spring. (Spring by WOLFF). bullet at the muzzle. agencies with many sent to our combat troops abroad
Marion, NY 14505. Order Today! $42.50 * Will ship to P.O. Box, home, business,
BATF APPROVED!!!! military post office (apo-fpo)
Reloading Equipment S5821 Will not void C&R status or cause 922 issues.
PRICING:
100-999 $8.00/100 * Will ship to all 50 states,
Wanted NOW AVAILABLE
1000-4,999 $7.00/100 DC, and foreign nations For same day shipping
Made in USA
RELOADING EQUIPMENT & Gun 922(r) Compliance Parts 5,000+ $6.60/1000 ORDER TOLL FREE
related stuff WANTED! Attention Sabot setter $10.00 each
Estates, Gun Shops, Collectors! Sell
Hammer, Sear, and Trigger sets for 922(r) compli-
ance are CNC machined from 4140, heat-treated
by phone 24/7/365: 1 (866) 780-0430
me your no longer used reloading to original specs, and blued. Drop-in fit in all SKS Add $5.00 for orders in first 48 States. Utah
equipment, casting, gunsmithing variations. Hammer and Sear are designed for a innercityandtravelsurvival.com
residents add 6.25% sales tax. No COD’s or
smoother felt trigger pull, with Positive engage-
credit cards. All orders shipped ASAP.
visa, mc, amex, discover, or cash, check or money order to:
equipment & tools. Presses, dies, ment. Order online, call toll-free with CC ($102.35) Inner City and Travel Survival Co.
molds, Stocks, grips and Misc. parts or mail MO ($98.90) P.O. Box 10155, Bainbridge Is, WA 98110
too. I buy the items left over after
others buy the guns. Gladly travel for
to get yours today.
J&D Components
*All prices include “1st Class” anywhere in USA* 75 East 350 North, Orem, Utah 84057 One Pencil $39.95 • 2 Pencils $74.85
large collections. 866-232-4867 (801) 225-7007 3 Pencils $99.95 Priority mail • 6 Pencils $174.85 • 12 Pencils $295.00
Call Rick (330)806-4169 or email visit our web site at www.jdcomponents.com All shipments sent by Priority Mail (2 day delivery)
WWW.MURRAYSGUNS.COM
ricketts711@sbcglobal.net
PAGE 58 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
Moving?
Let us know
Tremendous Variety Of Custom Classic
Cartridge Brass and Specially Cast Bullets BEFORE
Whether it’s a classic American, British If yo
u wa
YOU GO!
we c nt it
or European metric caliber, we can an m
supply new formed brass, specially cast
bullets in almost any caliber. That includes
ake
it!
MILLIONS OF NOTICE
FIREARMS NEWS is
Maynard types, as well as rimfire and pinfire
cartridges! Need a 8.15x46R bullet with central driving band? We GUN PARTS!! NOT FORWARDABLE.
have them… along with .310 Cadet factory bullets and six-sided
WE NOW HAVE You must send us a
Metford bullets. We also offer reloading tools and dies.
300 MODELS change of address.
ON THE WEB
This is a partial caliber list: VISA-MASTER-DISCOVER To make sure
Company Check or MO. you don’t miss any
6mm Lee Navy .32 Remington 8x60 RS .401 WSL .43 Egyptian .45-120 Sharps issues, please notify
.25 Remington 8mm Kirtz .33 Win. .41 Colt .44 Bull Dog .50-70 Govt.
6.5x53R Dutch 8.15x46R .351 WSL .401 Herters .44 Russian .50-95 WCF
BOB’S GUN SHOP us 6–8 weeks
7.35 Italian 8mm Lebel 9mm Jap Rev. .40-60 WCF .45 Colt blank .50-110 WCF
P.O. Box 200 before you move.
32 French Auto 8x50R Siamese 9mm Mannlicher .40-65 WCF 455 Webley .50 x 31∕4”
Royal, AR 71968
.310 Cadet 8x52R Siamese 9.5mm Mannlicher .40-82 WCF .45-60 WCF .56-46
.303 Savage 8x56 Mannlicher .35 Win. 11mm French Rev. .45-70 blank .56-50 FAX 501-767-2750
7.63 Mannlicher 8x57 R360 .38-56 WCF .43 Spanish .45-75 WCF .56-52 www.gun-parts.com 1-800-345-6923
.32 WSL 6x58 Sauer 4-in-1 blank .43 Mauser .45-90 WCF .577 Snider or go to
gunparts@hsnp.com www.firearmsnews.com
Bob Hayley
211 North River, PO Box 889, Seymour, TX 76380 Phone (940) 888-3352 Introducing the “ALL NEW”
HYPERGAT
USMACHINEGUN.COM Class III Dealer & Manufacturer web: www.usmachinegun.com
TRIGGER SYSTEM
Fits most all Rifles and Pistols .22 to .50cal
“Bump-Firing”
“Slide- Firing”
NO
No Technique required!
BEST of ALL No High Price!!
$49.95
Our Rear Stock Sdapters for AK-47 Draco, Yugo M92/M85/M70,
Arsenal Sam 7k, and Century Arms pistols, starting at $69.99 "FORCE MULTIPLYER" Complete with the "Hypergat" Trigger System.
Mounts easily- Does not obstruct trigger-600 to 1000 rpm
No Drilling, no welding or permanent installation to your gun, Easy Installation! “Fully auto type Fire” - ATF Legal
THIS IS THE EASIEST BEST RAPID FIRE
ATF Approved Shock Wave Blade Rear
Stock System Complete with Rear Adapter for $149.99 TRIGGER SYSTEM IN THE WORLD! IT IS THE ONLY
SYSTEM THAT WORKS ON .22’S PERIOD.
WE ALSO OFFER SUPPRESSOR THREAD ADAPTERS, PARTS AND Go to our website or Call 970-417-4860 and get yours today!!
UPGRADES FOR M11, MAC-10 AND MASTER PIECE ARMS FIREARMS. See our AMAZING videos on our website!
Michael Norman • FFL/SOT • PO Box 2191 • Mesa, AZ 85214 • 602-448-6266 WWW.HYPERGAT.NET
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 59
RUBEN MENDIOLA
DEALERNFA, INC.
www.subguns.com
5.56/.223 - MOD 3, 4, 5. . . . . . . . . . . $44.95 Quality Customer Service and Integrity at: www.subguns.com RECOMMENDED
DEALERS LIST
www.dealernfa.com
BravoCompanyMFG.com • Hartland, WI U.S.A.
Toll Free: 1-877-BRAVO CO (1-877-272-8626)
Fax: 262-367-0989
PAGE 60 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
SUPERSTORE!
makes, models, manufacturers, and vintages. Plus
discover your best buys on ammo, optics, gun parts,
and many more accessories, supplies, & services.
RUBEN MENDIOLA
DEALERNFA, INC.
PO Box 566300, Miami, FL 33256-6300, 305-271-3436
TOLL FREE: 866-NFA-WANT (866-632-9268), FAX: 866-415-7066,
CELL: 786-256-6746 for pics or text, EMAIL: Ruben@dealernfa.com
HOURS: 8am-9pm Eastern, 7 days a week
!WANTED!
ALL TYPES OF QUALITY LEGAL MACHINE GUNS!
MI CARBINE
PARTS
Call or write for a
FREE CATALOG!!
ELECTED TO
Carbine Barrels
Stock Pouches www.subguns.com
Slings & Early Oilers
Stocks & Handguards NO COLLECTION TOO LARGE! RECOMMENDED
DEALERS LIST
Type I Early Flip Sights
SET TRIGGERS *Type I, II Dog Leg Hammers
GENEROUS FINDER’S FEES GLADLY PAID!
*Flat & Round Bolts: $95.00 & Up Estate and Machine Gun Appraisals!
AR-15...1.5 - 2.0 Pull Wt. *Front Bands Type I, II & III
HK91/93...2.0 - 2.5 Pull Wt. *Front Sights Before Selling Your Guns, Please Call Me To Make Sure You Are Getting The Most For Them!
*Swivels (All Mfgs.): $18.00 & Up CONSISTENTLY PROVIDING EXCELLENT AND DISCREET SERVICE & FAIRLY PRICED HIGH
FAL... 1.25 - 1.75 Pull Wt. *Mag. Rel. Type I, II & III: $32.00 & Up
*MIAI Recoil Plate Covers: $95.00 & Up QUALITY MACHINE GUNS SINCE 1985!
Sniper Grade Trigger Work *MIAI Butt Plate Springs: $10.00
Attorney Available for Trust or Estate Matters.
For Most Semi-Auto Rifles *MIAI Coil Springs (Pistol Grip): $10.00
*Type I Band Screws: $7.50
Your
TRADING POST
for anything that
SHOOTS. ALWAYS PAYING TOP DOLLAR!!
BEFORE SELLING YOUR GUNS, PLEASE CALL US TO
• A unique blend of fascinating feature stories and
MAKE SURE YOU ARE GETTING THE MOST FOR THEM!
information-packed columns in every issue.
• Firearms News is loaded with exciting bargains on
rifles, shotguns, revolvers and pistols.
• A constantly revolving inventory gives you more to
choose from.
SUBSCRIBE TODAY!
1-800-345-6923
or go to www.firearmsnews.com www.dealernfa.com
ALWAYS PAYING TOP DOLLAR!
PAGE 62 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
ON THE GO?
GET YOUR DIGITAL EDITION!
www.firearmsnews.com
click on Subscribe Now!
Digital edition is available on iPad™ iOS7 or newer and most Android® tablets. Not available on smartphones or pcs.
$59.95(plus S&H)
FFL DEALERS
bring more traffic to your
store with the
◆ Stainless Steel rear support
braces are included with
all mold kits and ARCast
resin refills.
LOCATOR
Accepts mil-spec lower
components.
Step 4:
He clicks on “Click for Map” to display
a map.
Step 5: STAY ON
He enters his own address to generate
driving directions to the dealer. TARGET
What does it take to get your store listed on
www.firearmsnews.com?
IT COSTS NOTHING
Just fill in the form below and send it to FIREARMS
NEWS, Dept. SF, 2 News Plaza 3rd Floor, Peoria, IL
61614. Or send an e-mail to SGNews@outdoorsg.com or
fax to (309) 679-5476 with the following information:
*Complete Info Required
Name of business
Street address
City
FIREARMS NEWS is Now Available
for iPad and Android Devices.
State
Zip
SUBSCRIBE TODAY
Telephone number For More Information Visit
Fax FIREARMSNEWS.COM
Amount you charge to transfer a gun
(include state or local fees if applicable)
PAGE 64 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
STAY ON
SUBSCRIBE
TODAY
For More Information Visit
FIREARMSNEWS.COM
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 65
PAGE 66 FIREARMS NEWS - firearmsnews.com VOLUME 71 - ISSUE 23
VOLUME 71 - ISSUE 23 FIREARMS NEWS - firearmsnews.com PAGE 67
ON THURSDAYS,
WE GO BALLISTIC
America’s top gunners are on the move –
to a brand new night. Led by the venerable
Guns & Ammo, Lock & Load Thursdays delivers
the firepower that gun aficionados crave.
& NS
U NS APO
G E
ND W
HA SIVE
EN
DEF
URE
NT
N VE
GU
’S
ON UN
GA
S
LL
ER
NEW NIGHT
V IDS OF G
DA
MMO
&A
NS
GU
AR
NS
&G
E
THURSDAYS
GU
GU
NF
AT
HER
8P E/P
E SCHEDULE SUBJECT TO CHANGE thesportsmanchannel.com
TH
SEE IT
LEARN IT
BUY IT
Watch Davidson’s Gallery of Guns Television
to see unique and exclusive guns, learn about
them, and buy them from your local
GalleryofGuns.com retailer.