Académique Documents
Professionnel Documents
Culture Documents
2.00” 2.50”
(50.8 mm) (63.5 mm)
4.00” 1.41”
(101.6 mm) (35.7 mm)
4.75” 2.75”
(120.7 mm)
(69.9 mm)
3.69”
(93.7 mm)
6.20”
(157.4 mm)
13.60”
(345.4 mm)
OUTLET INLET
SAE J518, 1-1/2 INCH SAE J518, 1-1/2 INCH
3.73”
(94.7 mm)
7.50”
(190.5 mm)
Specifications: 8641 Series Integrated Natural Gas Fuel Control Valve Assembly
Power 120 Volt DC Nominal (80-180 Volt DC Range). Also operates on AC
Motor position 4-20 mA command
Minimum/Maximum pressure 0-435 psi(g)
Minimum/Maximum fuel temp -40°C to +150°C (-40 to +302°F)
Rated flow 6000 pph
Valve body material Stainless Steel
Compliance NACE IV
Slew Rate < 100 Milliseconds Full Stroke
Response time < 20 msec.
Options RF 600# ANSI Flanges, 24VDC Nominal, (18 - 30 Volt DC Range), also operates on AC
Options NACE available
Compressor
Discharge Pressure
Compressor
Fuel
Supply 4-20 mA
YF 7-5078 Position Signal
Actuator
Turbine
To Fuel Control
Nozzles System
Stop Stop
Valve Valve Loader Butterfly
Valve Valve
Y&F 8641
Loader Valve Assembly Standard Butterfly Valve Integrated
Designed & built by: Solar Manufactured by:
• Neles Jamesbury Natural Gas
• Fisher Fuel Control
Valve Assembly
The Y&F 8641 Assembly replaces • Y&F Actuator: 7-5078 or 7-5131
three components with one unit: • Air Bleed Valves
• Solar-built loader valve assembly
©2013 Young & Franklin Inc. All rights reserved. Specifications subject to change without prior notice.