Académique Documents
Professionnel Documents
Culture Documents
Data presented in this catalogue are typical values of properties and are intended to serve as guide only. SPL reserves the right to
review the content of this catalogue and revise.
ISO : 14001
Certified ISO 9001 : 2000 by
REGISTERED
OHSAS 18001:1999
FIRM
01-2006, SPL/CSS/QI/003
Test Method & Standard Properties Handling Precautions
Data presented in this catalogue are typical values of While the handling of Supreme polystyrene pellets
properties for natural materials and intended to serve generally does not present unusual problems, a dust
as a guide only. All tests are carried out at 23°C can be formed under some circumstances . If
unless otherwise stated. Testing of all mechanical workers are exposed to this dust , they should be
properties is done with an injection molded specimen protected from dust inhalation by use of approved
of 3.2 mm. In actual applications, properties can be dust respirators. Contact with the skin and eyes
affected to a considerable extent by the mould / die should be prevented by use of protective
design, the processing conditions and the colour. equipment and/or clothing.
Supreme polystyrene resins can be recycled , place in a shade away from sunlight and heat. The
incinerated or disposed off in landfill without packing used is not UV stabilised and hence should
ISO : 14001
Certified ISO 9001 : 2000 by
REGISTERED
OHSAS 18001:1999
FIRM