Académique Documents
Professionnel Documents
Culture Documents
Blade Compatible
Blade Description Uses
No. Handles
For cutting skin and muscle in surgery, and
Curved cutting edge with for general carving and stencil making;
#10 1, 3, 7
flat back also can be used for removal of 'edge
beads' from photolithography resists.
3, 3L, 3
This blade is a small and
#10a Graduated, 5B,
straight
7, 9, B3, B3L
Triangular blade with sharp
For precision cutting, stripping, sharp
point, flat cutting edge
#11 1, 3, 7 angle cuts and also stencil cutting due to
parallel to the handle and
its similarity to the X-Acto artknife blade
flat back
A small, pointed, crescent-
#12a 3, 7 shaped blade sharpened on
the inside edge of the curve
A small, pointed, crescent-
#12b 3, 7 shaped blade sharpened on
both sides of the curve
#15 3, 7 A smaller version of the #10 For the same general uses as the #10 blade
The #15 with a downward
#15c 3, 7 angle, flatter and thinner
than the #15
A narrow chisel-like blade
with flat, angled cutting
#16 1, 3 For cutting stencils, scoring and etching
edge, positioned higher than
the axis of the handle
A flat face 1.6 mm chisel
#17 1, 3 For narrow cuts
blade
#18 2, 5, 6 A 12.7 mm chisel blade For deep cuts and scraping
#19 4 A similar blade to the #15
For general use, shaping, whittling and
#22 2, 4, 5, 6 A larger version of the #10
trimming
A wide, flat, angled cutting For corner cuts, trimming, stripping, and
#24 2, 5, 6
edge cutting mats and gaskets
A triangular blade similar to
the #11, with the flat back
#25 4
edge taking a downwards
angle
A long blade resembling the
#10 with a long cutting
#60 4
edge, rounded tip and flat
back.