Académique Documents
Professionnel Documents
Culture Documents
Overview Mounting
Designed for use with FireBus FB-8000 Process Control A rugged snap-fit device allows easy and reliable fixing
Systems and FB-8800 Safety Systems the 8913-PS-AC onto various types of 35 mm DIN rail. A heavy duty DIN
and the 8914-PS-AC are members of a family of DIN-rail rail mounting kit is available for larger amplitude vibration
mountable system and field power supplies. environments (8413-FN-DN).
The power supplies are primary controlled AC-DC and A pair of mounting brackets are also available for screw
DC-DC flyback converters with a constant switching fixing the unit to a flat panel (8414-FK-SU). The units
frequency of 130 kHz. The single step conversion of the have pluggable screw terminals providing easy access
line input voltage to a low output voltage and the power from the front panel.
factor correction, results in an extremely high efficiency. Key Features
These power supplies have been designed to the latest • Certified for use in SIL 2 applications (IEC 61508)
industry requirements and standards and are ideal for
use in demanding applications such as Fire & Gas Safety • Power factor correction with low harmonic distor-
equipment in harsh environments, including in Zone 2 tion; negligibly low inrush current
and Division 2 hazardous areas.
• High immunity to transients and surges; and low
Safety Standards
electromagnetic emissions.
The 8913-PS-AC and 8914-PS-AC power supplies cor-
respond to class I equipment according to IEC/EN60950 • Input over- and undervoltage lock-out and thermal
They also comply with EN61010-1 and EN 50178 stan- protection
dards and have been designed in accordance with these
standards for: • Output overvoltage protection by a second control
loop to ensure safe operation of the final system.
• Building in on DIN-Rails or on a wall/panel
• All outputs are electrically isolated SELV1 circuits
• Basic insulation between input and case, based on with low output noise.
250 VAC/350 VDC
• Proof against no-load, overload and short-circuits.
• Double insulation between input and output, based
on 250 VAC/350 V DC • Can operate at full load up to an ambient tempera-
ture of 70ºC in free air.
• Operational insulation between the outputs
Ordering information:
8913-PS-AC System and Field Power Supply
8914-PS-AC Field Power Supply
Copyright ©2009 FireBus Systems, Inc. Note: The information in this data sheet is given in good faith and consid-
P. O. BOX 460269, ered accurate at the time of printing, however, the company reserves the
Houston, TX 77056-8269 right to change specifications of products at any time without prior notice.
http://www.FireBusSystems.com.
09FCS084-A09