Académique Documents
Professionnel Documents
Culture Documents
OBJETIVO
RESUMEN
Los convertidores son dispositivos electrónicos encargados de transformar una señal suministrada
en la entrada en otra de características predeterminadas. L a conversión de corriente continua
(DC/DC) tiene una importancia capital, ya que la gran mayoría de los equipos electrónicos e
informáticos, tanto de uso doméstico como industrial, precisan de una alimentación de tensión
continua.
La conversión DC/DC significa la obtención de una tensión continua con unas características
determinadas a partir de otro nivel de tensión que no las posee.
Cuando la alimentación sea una fuente de voltaje continuo, el principio de conmutar de forma
periódica las conexiones entre la fuente D.C y la carga proporciona un mecanismo para controlar la
potencia en la carga. Estos circuitos se les denominan troceadores ("choppers") o reguladores
estáticos de continua.
Los reguladores estáticos de continua son sistemas que transforman la corriente continua de tensión
constante en corriente continua de tensión variable y de la misma frecuencia. En el límite donde la
potencia entregada a la carga sea máxima o nula se obtienen los interruptores estáticos de continua.
También llamado chopper de cuatro cuadrantes ya que la corriente en la carga puede ser tanto
positiva como negativa, al igual que ocurre con el voltaje de la misma.
En el 4º cuadrante V y I son negativas pero esta vez V > I (En magnitud), teniendo una corriente
positiva y con ello un par motor positivo con la energía fluyendo del motor a la fuente.
Abstract
The converters are electronic devices responsible for transforming a signal supplied into the input in
another of predetermined characteristics. The conversion of direct current (DC / DC) is of
paramount importance, since the vast majority of electronic and computer equipment, both for
domestic and industrial use, precision of a continuous voltage supply.
DC / DC conversion means obtaining a DC voltage with a certain variety of voltage levels that do
not have them.
When the supply is a source of continuous voltage, the principle of periodically switching the
connections between the source D. C and the load provides a mechanism to control the power in the
load. These circuits are called choppers or static regulators of continuous.
The static continuation regulators are systems that convert direct current from constant voltage into
DC voltage of variable voltage and of the same frequency. At the limit where the power delivered to
the maximum load of the sea is obtained the static continuation switches.
Also called four-quadrant helicopter since the current in the charge can be as positive as negative,
as it happens with the voltage of the same.
In 4th quadrant V and I are negative but this time V> I (In magnitude), having a positive current and
with a positive motor with the energy flowing from the motor to the source.
-En el 4º cuadrante: V y I son negativas positivo con la energía fluyendo del motor a
pero esta vez V > I (En magnitud), teniendo la fuente.
una corriente positiva y con ello un par motor
(R. STERLING 2007 )
Figura 2: Chopper de cuatro cuadrantes en el IV cuadrante.
MATERIALES Protoboard
5 transistores TIP 41
2 capacitores electrolíticos
(0,47 uF)
Transformador
ANÁLISIS Y RESULTADOS
CONCLUSIONES
RECOMENDACIONES
BIBLIOGRAFÍAS
https://es.wikibooks.org/wiki/Electr%C3%B3nica_de_Potencia/M%C3%B3d
ulos_de_regulaci%C3%B3n_de_continua/Texto_completo
https://www.uv.es/emaset/iep00/IEP10-0607.pdf
https://issuu.com/jaguilarpena/docs/conversores_dc-dc