Académique Documents
Professionnel Documents
Culture Documents
The product stated here in was manufactured in the U.S.A. and supplied in accordance with the Quality System Program of the
Lincoln Electric Company, Cleveland, Ohio, U.S.A. as outlined in our Quality Assurance Manual which meets the requirements of
ISO 9001, NCA 3800, AWS A5.01, and other specifications, as appropriate. The Quality System Program has been approved by
ASME, ABS, and VdTUV, and is certified to ISO 9001.
The 4.0mm Pipeliner® 6P+ electrode, Q2 Lot® 14602496 was tested according to the requirements of AWS A5.1:2012 and ASME
SFA-5.1 (E6010).
E6010 Actual
Operating Settings
Requirement Lot Results
Electrode Size 4.0mm
Polarity DC+
Plate Thickness, mm (in) 19 (3/4)
Current, A 140
Pass/Layers 18/9
Preheat Temperature, °C (°F) (225 min.) 105 (225)
Interpass Temperature, °C (°F) (225 - 350) 150 (300)
Postweld Heat Treatment As-welded As-welded
Mechanical properties of weld deposits E6010 Actual
Requirement Lot Results
Note: The recording of false, fictitious or fraudulent statements or entries on this document maybe punished as felony under Federal
Statutes including Federal Law, Title 18, Chapter 47.
Certified Material Test Report Q2 ® Lot 14602496, Page 2 of 2