Vous êtes sur la page 1sur 25

New RNC Previous RNC New RNC Name Site Count RNC ID

BESI03-A RNCBESI06 113 115


BESI03-B RNCBESI03 RNCBESI03 148 104
KPNG04-A RNCRWNG03 97 110
KPNG04-B RNCKPNG04 RNCKPNG04 118 103
KPNG05-A RNCKPNG05 93 105
KPNG05-B RNCKPNG05 RNCKPNG07 64 114
KPNG06-A RNCKPNG06 102 107
KPNG06-B RNCKPNG06 RNCBESI05 97 116
NILA04-A RNCNILA08 135 113
NILA04-B RNCNILA04 RNCNILA04 135 106
NILA07-A RNCSHTI03 152 119
NILA07-B RNCNILA07 RNCNILA07 120 108
RWNG01-A RNCRWNG01 139 102
RWNG01-B RNCRWNG01 RNCRWNG02 138 109
SHTI02-A RNCSHTI02 104 101
SHTI02-B RNCSHTI02 RNCSHTI04 101 118
LAC Value RAC Value Remarks
10025 15 New RNC
25200 8
10024 3 New RNC
10400 3
10600/25300 (to merge, use 10600) 5/9 (to merge, use 5)
10100 5 New RNC
22500 11
10050 11 New RNC
10027 10 New RNC
25400 10
10023 12 New RNC
23500 12
10300/25100 ( to merge, use 10300) 2/7 (to merge, use 2)
10022 2 New RNC
10200 1
10026 1 New RNC
1.1 4G - > 3G cell reselection
1.2 3G - > 4G cell reselection
2.0 Inter RAT PS HO
1.1 4G - > 3G cell reselection

/* Set in 4G side: */
/* double confirm the QRxLevMin is set to -64, mapping t
11 MOD CELLSEL: LocalCellId=11, QRxLevMin=-64;

/* Set the threshold for reselection to 3G. 9 map to -1102


11 MOD CELLRESEL: LocalCellId=11, SNonIntraSearchCfgInd=CFG, SNonIn

/* Add UMTS frequency information for L->U reselection,


11 10662 ADD UTRANNFREQ: LocalCellId=11, UtranDlArfcn=10662, UtranFddTd
/* If LTE signal is too good to reselect to 3G, then we can m

11 2939 ADD UTRANNFREQ: LocalCellId=11, UtranDlArfcn=2939, UtranFddTdd


11 10662 ADD UTRANNFREQ: LocalCellId=11, UtranDlArfcn=10662, UtranFddTd
Min is set to -64, mapping to -128dBm*/

ction to 3G. 9 map to -1102Bm, 7 map to -114dBm */


raSearchCfgInd=CFG, SNonIntraSearch=9, ThrshServLow=7, CellReselPriority=6;

mation for L->U reselection, 10662 is ARFCN of the UMTS F2 cell, 6 means require >= -103dBm for UMTS with also LTE signal dr
nDlArfcn=10662, UtranFddTddType=UTRAN_FDD, UtranUlArfcnCfgInd=NOT_CFG, CellReselPriorityCfgInd=CFG, CellReselPriority=3, Pma
eselect to 3G, then we can modify the SNonIntraSearch and ThrshServLow larger to trigger the reselection easier. Set value of SNonIntr

nDlArfcn=2939, UtranFddTddType=UTRAN_FDD, UtranUlArfcnCfgInd=NOT_CFG, CellReselPriorityCfgInd=CFG, CellReselPriority=4, Pmax


nDlArfcn=10662, UtranFddTddType=UTRAN_FDD, UtranUlArfcnCfgInd=NOT_CFG, CellReselPriorityCfgInd=CFG, CellReselPriority=3, Pma
MTS with also LTE signal drop to lower than both SNonIntraSearch and ThrshServLow then reselect from LTE to UMTS */
FG, CellReselPriority=3, PmaxUtran=24, QRxLevMin=-58, ThreshXLow=6;
easier. Set value of SNonIntraSearch and ThrshServLow to the maximum 31, which mapping to LTE signal -66dBm */

G, CellReselPriority=4, PmaxUtran=24, QRxLevMin=-58, ThreshXLow=6;


FG, CellReselPriority=3, PmaxUtran=24, QRxLevMin=-58, ThreshXLow=6;
om LTE to UMTS */
1.2 3G - > 4G cell reselection

/* Activate 3G license for LTE mobility */


SET LICENSE: SETOBJECT=UMTS, ISPRIMARYPLMN=YES, FUNCTIONSWITCH5=UL_MOBILITY_P1-1;

/* Activate SIB-19 to forecast SIB for U->L reselection */


46443 MOD UCELLSIBSWITCH: CellId=46443, SibCfgBitMap=SIB19-1;
24808 MOD UCELLSIBSWITCH: CellId=24808, SibCfgBitMap=SIB19-1;

/* Configure NodeB release version */


328 MOD UNODEB: NodeBId=328, NodeBProtclVer=R9;

/* Configure UMTS cell reselection priority 3, which is lower than that of LTE cell 6 */
46443 MOD UCELLSELRESEL: CellId=46443, SPriority=4;
24808 MOD UCELLSELRESEL: CellId=24808, SPriority=3;

/* Configure LTE neighbor frequency and set a higher priority 6 to UMTS. And ThdToHigh =9 maps
ADD UCELLNFREQPRIOINFO: CellId=25021, EARFCN=1300, NPriority=6, ThdToHigh=9, EMeasBW=D50, EQrx
46443 ADD UCELLNFREQPRIOINFO: CellId=46443, EARFCN=1300, NPriority=6, ThdToHigh=9, EMeasBW=D50, EQrxl
24808 ADD UCELLNFREQPRIOINFO: CellId=24808, EARFCN=1300, NPriority=6, ThdToHigh=9, EMeasBW=D50, EQrxl
OBILITY_P1-1;

LTE cell 6 */

And ThdToHigh =9 maps to the threshold for LTE signal -110dBm for UMTS -> LTE reselection */
9, EMeasBW=D50, EQrxlevmin=-64, BlacklstCellNumber=D0;
9, EMeasBW=D50, EQrxlevmin=-64, BlacklstCellNumber=D0;
9, EMeasBW=D50, EQrxlevmin=-64, BlacklstCellNumber=D0;
2 Inter RAT PS HO

2.1 4G - > 3G PS HO
/*Enable L->U Handover and redirection */
MOD ENODEBALGOSWITCH: HoModeSwitch=UtranPsHoSwitch-1&UtranRedirectSwitch-1;

/* Set L->U HO measurement and report information */


MOD INTERRATHOCOMM: InterRatHoUtranB1MeasQuan=UTRAN_RSCP, InterRatHoA1A2TrigQuan=RSRP, InterRatHo

/* Set UMTS signal requirement for L->U HO, UMTS RSCP shall >=-102dBm (-103+2/1) */
ADD INTERRATHOUTRANGROUP: LocalCellId= 11, InterRatHoUtranGroupId=0, InterRatHoUtranB1ThdRscp=-103,
5 ADD INTERRATHOUTRANGROUP: LocalCellId=5, InterRatHoUtranGroupId=0, InterRatHoUtranB1ThdRscp=-103, Inte

/* Set L->U HO trigger threshold */


ADD INTERRATHOCOMMGROUP: LocalCellId=11, InterRatHoCommGroupId=0, InterRatHoA1A2Hyst=2, InterRatH
5 ADD INTERRATHOCOMMGROUP: LocalCellId=5, InterRatHoCommGroupId=0, InterRatHoA1A2Hyst=2, InterRatHoA1
/* If LTE signal is too good >> -116dBm (-115-2/1), then change the InterRatHoA2ThdRsrp to
A1A2TrigQuan=RSRP, InterRatHoEventType=EventB1;

02dBm (-103+2/1) */
RatHoUtranB1ThdRscp=-103, InterRatHoUtranB1Hyst=2;
tHoUtranB1ThdRscp=-103, InterRatHoUtranB1Hyst=2;

erRatHoA1A2Hyst=2, InterRatHoA1ThdRsrp=-111, InterRatHoA2ThdRsrp=-115;


atHoA1A2Hyst=2, InterRatHoA1ThdRsrp=-111, InterRatHoA2ThdRsrp=-115;
e the InterRatHoA2ThdRsrp to the maximum value -43 to ensure the A2 event will be triggered to measure UMTS signal. Also set
sure UMTS signal. Also set the InterRatHoA1ThdRsrp to -43dBm thus Inter-RAT measurement will not stop */
4G_CELL CI SiteName CellName GABS LayerName SectorID Status Cell_Reserved
TTDIML_3 46443 TTDIMG TTDIMG_3 1 F4 3 OnAir NOT_RESERVED
TTDIML_3 24808 TTDIMU TTDIMU_8 1 F2 8 OnAir NOT_RESERVED
HSDPA Active HSUPA Active SPGid HSPA+ Active Config Cell_Blocked ANI SRN Phase VIP
Active Active 1 Active W900 No 328 2 Existing NO
Active Active 1 Active Tri-HS No 328 2 Existing NO
Sub-region System UARFCN (UL) UARFCN (DL) CI LAC RAC SAC MCC MNC RNCid
NorthPJ UMTS 2714 2939 46443 10400 3 4644 502 12 103
NorthPJ GSM 9712 10662 24808 10400 3 2480 502 12 103
RNCName SC1_BCCH MSC SGSN PCPICH(dBmx0.1) MaxTxPower(dBmx0.1) Longitude Latitude
KPNG04 161 SGKPH 300 430 101.630003 3.149331
KPNG04 161 SGKPH 330 430 101.630003 3.149331
NodeBType Equipment Type RRU_Location Structure Type SiteType AntHeight(m) Azimuth
BBU3806 / RRU3804 Near Antenna Rooftop Macro 10.8 290
BBU3806 / RRU3804 Near Antenna Rooftop Macro 10.8 290
Azimuth2 Azimuth3 AntType E_Tilt(x. 1) M_Tilt UL CE DL CE HS-PDSCH Code
Kathrein 742 212 80 0 1536 1536 180
Kathrein 742 212 50 0 1536 1536 180
HSPA+(64QAM NUM) TMA Transmission Site Name
6 NO IP TAMANTUN
6 NO IP TAMANTUN
Site
No 6Address
A Lrg. Dato Sulaiman_x000D_ BeamWidth ObjectSize Scell ObjectSize
Taman
No 6 A Tun
Lrg. Dr Ismail
Dato Sulaiman_x000D_ 15 2 46443_F4
Taman Tun Dr Ismail 25 1 24808_F2
Scell
46443_F4
24808_F2
4G_CELL CellName SectorID UARFCN (UL) UARFCN (DL) CI LAC RAC SAC MCC MNC
TTDIML_3 TTDIMG_3 3 2714 2939 46443 10400 3 4644 502 12
TTDIML_3 TTDIMU_8 8 9712 10662 24808 10400 3 2480 502 12
RNCid RNCName PSC ADD UNTRANEXTERNALCELL "
103 KPNG04 161 ADD UTRANEXTERNALCELL: Mcc="502", Mnc="12", UtranCellId=46443, UtranDlArfcn=2939, Utra
103 KPNG04 161 ADD UTRANEXTERNALCELL: Mcc="502", Mnc="12", UtranCellId=24808, UtranDlArfcn=10662, Utr

ADD UTRANNCELL: LocalCellId=5, Mcc="502", Mnc="12", UtranCellId=46443, LocalCellName="TT


ADD UTRANNCELL: LocalCellId=5, Mcc="502", Mnc="12", UtranCellId=24808, LocalCellName="TT
3, UtranDlArfcn=2939, UtranUlArfcnCfgInd=NOT_CFG, RncId=103, RacCfgInd=NOT_CFG, PScrambCode=161, Lac=10400, CellName="TT
8, UtranDlArfcn=10662, UtranUlArfcnCfgInd=NOT_CFG, RncId=103, RacCfgInd=NOT_CFG, PScrambCode=161, Lac=10400, CellName="T

=46443, LocalCellName="TTDIML_3", NeighbourCellName="TTDIMG_3";


=24808, LocalCellName="TTDIML_3", NeighbourCellName="TTDIMU_8";
161, Lac=10400, CellName="TTDIMG_3";
=161, Lac=10400, CellName="TTDIMU_8";

Vous aimerez peut-être aussi