Académique Documents
Professionnel Documents
Culture Documents
Telescopic Chute
The Sandvik telescopic chute - better environment, reduced costs, increased profits.
2
Automatic
level adjustment
The telescopic chute can be operated from
the control cabin, via a PLC with automa-
tic level sensor or manually via remote
control. The chute senses its height above
the material stockpile and automatically
adjusts, minimizing the risk of dust
emmissions. The automatic level sensor
minimizes the need for manual monitor-
ing, and eliminates the risk of the lowest
conical chute segment coming into contact
with the material stockpile. In addition, The automatic level sensor means that the telescopic chute itself senses
the electrical chain hoist is equipped with the height that it is above the stockpile, and adjusts this height so that the
limit switches and overload protection to risk of dust emission is always minimized.
limit movement and prevent damage to the
chute.
Separate
carrying collar
The tape loops are fixed to a rigid light-
weight, split carrying collar, which safely
holds the replaceable conical chute seg-
ment in position. The carrying collar can
be easily separated allowing the conical
chute segment to be turned (if it is worn in
one place) or be replaced. Because the
carrying collar is reused, the cost of spare As the material stockpile grows, the telescopic chute retracts as the
parts is reduced. segments are drawn into one another. Each segment only adds 100 mm
to the overall length when fully retracted.
Optimized conical
chute segment design
The unique, modular design allows for a
choice of materials in different parts of the
telescopic chute. The construction of the
chute segment is optimized for stiffness,
long life and material flow.
The carrying collar can be separated easily, and the chute segment
replaced or turned. The modular design reduces down time and spare
parts costs.
3
Technical Data
Top frame with integrated
D1 chain hoist
W1 D2
H2
Cable
protection Carrying
channel collar
Cone
Chain
H1
Tape
loop
Level sensor
W2 D3
Total height, H1 m 17 17
Height of each section, H2 m 1.1 1.1
Total frame assy. depth, D1 mm 1650 1890
DIMENSIONS
If your application falls outside the limits specified above, please contact your Sandvik Mining and Construction representative.
4
Dust Control
in Action
• Minimizes the risk of dust emission
• Improves employee working conditions
• Improves neighboring environment
• Reduces material segregation and contamination
• Improves product quality
• Reduces maintenance and clean-up cost
• Improves work safety
Better environment.
Improved product quality
Dry bulk material contains dust and fines. When a mate-
rial stockpile is laid down, it is
probable that the dust particles
will be spread around, resulting
in both a bad working environ-
ment and impairment of the sur-
rounding area. Material is lost,
and maintenance and clean up
costs increase. In addition, mate-
rial segregation occurs in the
stockpile, which can reduce the
value of the product, or even
make it unsaleable.
The telescopic chute prevents
the emission of dust and loss of
material. A vacuum is created
inside the chute by the material
flow, reducing the requirement
for expensive, service
demanding filtration systems. The user-friendly design
enables easy maintenance. All in all, it gives great savings
for operations.
Wide area
of use
The telescopic chute has its rightful place within a great
number of areas of use. Ballast production, minerals
processing, coal handling, coke and fertilizer are some
examples of the operations which can be made more
efficient, by use of a telescopic chute.
The chute is of simple and rugged design. It is unaffec-
ted by side winds and has an extremely good ratio between
minimum and maximum length. The number of conical
chute segments can vary, depending on the height of the
stockpile and that of the conveyor.
5
Sandvik is a high-technology engineering group with advanced
products and world-leading positions in selected areas – tools for
metalworking, machinery and tools for rock excavation, stainless
steel, special alloys and resistance heating materials and process
systems. The Group has 39,000 employees in 130 countries, with
annual sales of approximately SEK 63,000 M.
Sandvik Mining and Construction is a business area within the Sand-
vik Group and a world-leading manufacturer of drilling and
excavation machinery, tools and service for the mining and
construction industries. Annual sales amount to SEK 20,600 M,
with about 10,600 employees.
S A N D V I K M I N I N G A N D C O N S T R U C T I O N. T E L. +4 6 4 0 4 0 6 8 0 0. F A X +4 6 4 0 4 0 6 8 9 8.
www.sandvik.com