Académique Documents
Professionnel Documents
Culture Documents
Contents Introduction
COMPACT CYLINDERS A
RODLESS CYLINDERS D
GUIDED CYLINDERS E
ROTARY ACTUATORS F
ELECTRONIC SENSORS G
COMPLEMENTARY PRODUCTS H
C05 Series
Short Stroke Cylinders
• 8, 12, 20, 32, 50 and 63mm bore sizes
• Strokes to 25mm
• Single and double acting versions
P1G Series
Cartridge Cylinders
• 6, 10 and 15mm bore sizes
• Stroke lengths to 15mm
• Nickel plated body and stainless steel
piston rod construction standard
II
New Round Body Cylinders
SRX Series
Stainless Steel Body Air
Cylinders with Continuous
Position Feedback
• 1.06", 1.50", 2", 2.50" and 3.00" bore sizes
• Three mounting styles available
• Highly accurate position feedback capability
• Industry interchangeable
P1A Series
Mini-ISO Cylinders
• 10, 12, 16, 20 and 25mm bore sizes
• Stroke lengths from 20 - 500mm
• Conforms to ISO 6432 dimensional specifications
• Single and double acting versions available
P1L Series
High-Performance
Repairable Cylinders
• 20, 25, 32, 40, 50, 63, 80 and 100mm bore sizes
• Stroke lengths to 1,000mm
• 9 standard mounting styles
III
New Tie Rod Cylinders
TM
Econo-Ram II with Linear
Position Sensor
• 2" - 8" bore sizes available
• Magneto-strictive feedback technology
• Analog or digital outputs
• 11 mounting styles
2MNR Series
• 1-1/8" to 4" bore sizes available
• Single or double rod versions
• Strokes to any practical length
• 10 standard NFPA mounting styles plus
base bar mount
P1D Series
Metric Cylinders
• 32-125mm bore sizes available
• Four versions
– Standard (die cast end caps, composite piston)
– Removable Gland
– Clean (positive geometry/hygenic design)
– Tie Rod (traditional tube and tie rod)
• Conforms to the ISO6431/VDMA24562 standards
• Rod locking device available
IV
New Rodless Cylinders
V
Other Cylinder Products
PRNA Series
Vane Rotary Actuators
• 5 miniature and 4 standard models
• Rotation angles 90°, 100°, 270° and 280°
• Oscillating reference points of 40°, 45° and 90°
• 1.33 to 2355 in-lb torque at 100 PSI
PRN Series single or double-vane actuators yield a
high output torque to weight ratio. The unique vane
design assures minimal leakage and stable low
speed oscillation at low operating pressures.
Foot or flange mounting is available. Reed and Hall
effect switches are optional. Operating pressures to
140 PSI.
VI
Other Automation Products
Pneumatic Grippers
• Parallel and angular models
• Grip Forces: up to 3000 lbs
• Single acting, double acting, spring assist and spring return
VII
Other Automation Products
P5S-P Series
• 4 bore sizes available
• Stroke lengths up to 250mm
• Stroke adjustment is standard
• Optional bumpers, shock absorbers, flow controls,
mid position stops, and stroke lock are all available
• Stroke adjustment is standard
• Right or left mounting of all external features is
available
XL Series
• Thrust, reach and base styles
• Optional bumpers, adjustable stop collars, stainless
steel support shafts, composite bushings, dowel
pin holes, flow controls and fluorocarbon seals
• Mounts with counterbored through holes and fully
adjustable “T”-slots
• Maximum operating pressure 7 bar (100 PSI)
VIII
Pneumatic
Cylinders
Compact, Round Body, A
Tie Rod and Rodless
Reference Guide
B
Bore Size
1 1/16"
1 1/8"
1 1/4"
1 1/2"
1 3/4"
2 1/2"
3 1/4"
3 5/8"
4 1/2"
5/16"
7/16"
9/16"
3/4"
7/8"
10"
12"
14"
1"
2"
3"
4"
5"
6"
7"
8"
Cylinder Series
100mm
125mm
160mm
200mm
10mm
12mm
16mm
20mm
25mm
32mm
40mm
50mm
63mm
80mm
6mm
8mm
P1M ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
SC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
SCM ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
C05 ■ ■ ■ ■ ■
C05S ■ ■ ■ ■ ■ ■
P1G ■ ■ ■
SR ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Round Body Cylinders
SRM ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
SRD ◆ ◆ ◆ ◆ ◆
SRDM ◆ ◆ ◆ ◆
SRX ◆ ◆ ◆ ◆ ◆
P1A ■ ■ ■ ■ ■
P1L ■ ■ ■ ■ ■ ■ ■ ■
SP ◆ ◆ ◆ ◆ ◆ ◆
Econo-Ram II ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Econo-Ram II, Clean Plus ◆ ◆ ◆ ◆ ◆
Econo-Ram II, w/LPS ◆ ◆ ◆ ◆ ◆ ◆ ◆
2MNR ◆ ◆ ◆ ◆ ◆ ◆
Tie Rod Cylinders
PA-2 ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
PN ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
ACVB ◆ ◆ ◆ ◆ ◆ ◆ ◆
P1D ■ ■ ■ ■ ■ ■ ■
ME ■ ■ ■ ■ ■ ■ ■ ■ ■
MERL ■ ■ ■ ■ ■ ■ ■
TT ◆ ◆ ◆ ◆
P1X ■ ■ ■ ■ ■ ■ ■
Cylinders
Rodless
P1Y ■ ■ ■
P1Z - Basic ■ ■ ■
P1Z - Guided ■ ■ ■
Reference Section
End Cap Material
A
Pressure Range
Flexible Porting
Piston Sensing
# of Mountings
Double Acting
Cylinder Body
Adjustable Air
Single Acting
Construction
Cushions
Material
Option
Option
(PSI)
Cylinder Series
Compact Cylinders
Bolted Aluminum Aluminum 4 150 ● ● ❍ A P1M Swing Clamp
Tie Rod Aluminum Aluminum 6 250 ❍ ● A SC
Tie Rod Aluminum Aluminum 6 250 ❍ ● ● A SCM C
Block Aluminum N/A 1 150 ● A C05
Block Aluminum N/A 1 150 ● A C05S
Nickel Plated
Cartridge
Brass
N/A 1 100 ● A P1G
D
Non-repairable Stainless Steel Aluminum 28 250 ● ● ❍ B SR
Parker's obligation under this warranty is limited to the replacement or repair of any failed components.
The buyer understands that the seller will not be liable for any other costs or damages.
The buyers of quality Parker components and filters benefit by having ONE source for all pneumatic needs – Parker.
Robert W. Bond
President
Automation Group
Pneumatic
XII