Académique Documents
Professionnel Documents
Culture Documents
Objectives
Procedures
Step 1: Connect the analog trainer to the power supply and the power supply to the Mains.
Summing Amplifier
Step 6: Change the input voltage V1 and measure the output voltage Vo and fill the following table.
No. 1 2 3 4 5 6 7 8 9 10 11 12 13
V1 -3.5 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3
Vo 10.35 10 9.90 10.8 10.23 10.3 10.19 9.90 9.9 9.85 10.03 9.94 9.83
Step 8: connect the V1 terminal to the operational amplifier to the ouput terminal of the function
generator. Adjust the function generator to 3Vp-p 1kHz sine wave.
Difference Amplifier
Step 14: Change the input voltage V1 and measure the output voltage Vo and fill the following table.
No. 1 2 3 4 5 6 7 8 9 10 11 12 13
V1 -3.5 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3
Vo 3.79 3.35 3.28 3.06 2.8 2.6 2.35 2.1 1.83 1.64 1.38 1.14 0.86
Step 16: Connect the V1 terminal to the operational amplifier to the ouput terminal of the function
generator. Adjust the function generator to 8Vp-p 1kHz sine wave.
Conclusion:
According the experiment done, the group concluded that, Summing amplifier is a type of
operational amplifier configuration that is used to combine the voltages present on the two or more
inputs into a single output voltage. While, a difference amplifier is a type of electronic amplifier that
amplifies the difference between two input voltages but suppresses any voltage in common to the two
inputs.