Académique Documents
Professionnel Documents
Culture Documents
2
POWER UP YOUR PRODUCTIVITY
Load more tons per hour with the Volvo L120E. Its Engine
• Volvo D7D, a turbocharged, air-
powerful engine and the Automatic Power Shift (APS) to-air intercooled, low-emission
engine with electronically-
gearshifting system provide immediate response controlled fuel injection delivers
even in the toughest conditions. And Volvo axles are high torque even at low rpm.
• The electronically-controlled
designed to ensure that the rimpull is there when hydrostatic fan is only activated
needed. Torque Parallel Linkage (TP Linkage), load when necessary, thus saving fuel.
Steering
• Load sensing steering only uses
power when it’s needed, thereby
saving fuel.
• E-series loaders feature an
accumulator system, providing
stable, smooth steering and
greater safety.
Frame
• Rugged frame design for secure
mounting of components increases
the service life of the machine.
• Volvo’s frame joint bearing design
4
is a well-proven concept that’s easy parallel action throughout the entire greater efficiency and lower fuel
to maintain and renowned for its lifting range. consumption.
long service life. • Pilot-operated hydraulics allow
Load sensing hydraulics precise control of the attachments,
TP Linkage • The load sensing hydraulic system making life easier, and safer, for the
• Unique patented lift-arm system, ensures that hydraulic oil is pumped operator.
which provides two solutions in around the system only when and
one: excellent breakout torque and where it’s needed. This means
5
AN ALERT OPERATOR IS A PRODUCTIVE OPERATOR
6
VOLVO’S COMMITMENT TO NATURE AND MANKIND
Engine
7 liter, 6-cylinder straight turbocharged Power Torque
hp kW Economic working range Nm lbf ft
diesel engine with electronically-
300 220 1200
controlled unit pumps and conventional
200 800
injectors. The engine has wet replaceable 250 180 1000 700
cylinder liners and replaceable valve
160
guides and valve seats. The throttle 200
800 600
140
application is transmitted electrically 120
150 500
from the throttle pedal or the optional 100 600
Power 400
hand throttle. Air cleaning: three-stage. 80
100 Torque
Cooling system: Air-to-air intercooler and 400
hydrostatic, electronically-controlled fan. 800 1000 1200 1400 1600 1800 2000 r/min
15 20 25 30 35 r/s
Engine Volvo D7D LA E2
Max. power at 30,0 r/s (1,800 rpm)
SAE J1995 gross 165 kW (224 hp)
ISO 9249, SAE J1349 164 kW (223 hp) Drivetrain Brake system
Max. torque at 23,3 r/s (1,400 rpm) Torque converter: single-stage. Service brake: Volvo dual-circuit system
SAE J1995 gross 1020 Nm (752 lbf ft) Transmission: Volvo countershaft with nitrogen charged accumulators.
ISO 9249, SAE J1349 1015 Nm (749 lbf ft) transmission with single lever control. Outboard-mounted, hydraulically-operated,
Economic working range 1100–1600 rpm Fast and smooth shifting of gears fully sealed, oil circulation-cooled wet disc
Displacement 7,1 l (433 in3) between forward and reverse with Pulse brakes. The operator can select automatic
Width Modulation (PWM) valve. Gear- declutch of the transmission when
shifting system: Volvo Automatic Power braking through Contronic. Parking brake:
Shift (APS) with fully automatic shifting Fully sealed, wet multi-disc brake built
Electrical system
1-4 and mode selector with four different into the transmission. Applied by spring
Central warning system: Central
gear shifting programs, including AUTO. force and electro-hydraulically released
warning light for the following functions
Axles: Volvo fully-floating axle shafts with a switch on the instrument panel.
(buzzer with gear engaged): Engine
with planetary hub reductions and cast Secondary brake: Dual brake circuits
oil pressure, transmission oil pressure,
steel axle housings. Fixed front axle and with rechargeable accumulators. Either
brake pressure, parking brake applied,
oscillating rear axle. 100% differential one circuit or the parking brake fulfills all
hydraulic oil level, axle oil temperature,
lock on the front axle. safety requirements. Standard: The brake
steering system pressure, low coolant
system complies with the requirements of
level, coolant temperature, transmission
Transmission Volvo HTE 205 ISO 3450.
oil temperature, hydraulic oil temperature,
Torque multiplication 2,85:1
overspeeding in engaged gear, brake
Maximum speed, forward/reverse Number of brake discs per wheel
charging, fuel temperature, charge air
1 7,1 km/h (4.4 mph) front/rear 1/1
temperature.
2 13,1 km/h (8.1 mph) Accumulators 3x1,0 l
3 24,7 km/h (15.3 mph) (3x0.26 US gal)
Voltage 24 V 4 35,1 km/h (21.8 mph) Accumulator for parking brake 1x1,0 l
Batteries 2x12 V Measured with tires 23.5 R25 L3 (1x0.26 US gal)
Battery capacity 2x140 Ah Front axle/rear axle Volvo/AWB 31/30
Cold cranking capacity, approx. 1050 A Rear axle oscillation ±13°
Reserve capacity, approx. 270 min Ground clearance at 13° osc. 460 mm (18.1 in)
Alternator rating 1540 W/55 A
Starter motor output 5,4 kW (7.3 hp)
10 (L120E)
Steering system Hydraulic system Lift-arm system
Steering system: Load sensing System supply: Two load sensing axial Torque Parallel Linkage (TP Linkage)
hydrostatic articulated steering. System piston pumps with variable displacement. with high breakout torque and parallel
supply: The steering system has priority The steering system always has priority. action throughout the entire lifting range.
feed from a load sensing axial piston Valves: Double-acting 2-spool valve. The
pump with variable displacement. main valve is controlled by a 2-spool Lift cylinders 2
Steering cylinders: Two double-acting pilot valve. Lift function: The valve has Cylinder bore 150 mm (5.9 in)
cylinders. four positions including raise, hold, lower Piston rod diameter 80 mm (3.15 in)
and float. Inductive/magnetic automatic Stroke 676 mm (26.6 in)
Steering cylinders 2 boom Kick-out can be switched on and Tilt cylinder 1
Cylinder bore 80 mm (3.15 in) off and is adjustable to any position Cylinder bore 220 mm (8.7 in)
Piston rod diameter 50 mm (1.97 in) between maximum reach and full lifting Piston rod diameter 110 mm (4.3 in)
Stroke 486 mm (19.1 in) height. Tilt function: The valve has three Stroke 412 mm (16.2 in)
Working pressure 21 MPa (3046 psi) functions including rollback, hold and
Maximum flow 120 l/min (31.7 US gpm) dump. Inductive/magnetic automatic tilt
Maximum articulation ±40° can be adjusted to the desired bucket
angle. Cylinders: Double-acting cylinders Service
for all functions. Filter: Full-flow filtration Service accessibility: Large, easy-to-open
through 20 micron (absolute) filter service doors with gas struts. Swing-out
Cab cartridge. radiator grille and cooling fan. Possibility
Instrumentation: All important information to log and analyze data to facilitate
is centrally located in the operator’s field Working pressure maximum, pump 1 25,0 MPa troubleshooting.
of view on the Contronic monitoring (3,625 psi)
system’s display unit. Heater and Flow 145 l/min (38.3 US gpm) Refill capacities
defroster: Heater coil with filtered fresh at 10 MPa (1,450 psi)
and engine speed 32 r/s (1,900 rpm) Fuel tank 215 l (56.9 US gal)
air and fan with four speeds. Defroster
Working pressure, pump 2 21,0 MPa Engine coolant 70 l (18.5 US gal)
vents for all window areas. Operator
(3,046 psi) Hydraulic oil tank 143 l (37.8 US gal)
seat: Ergonomic seat with adjustable
Flow 110 l/min (31.7 US gpm) Transmission oil 38 l (10.0 US gal)
suspension and retractable seatbelt.
at 10 MPa (1,450 psi) Engine oil 21 l (5.5 US gal)
The seat is mounted on a bracket, and engine speed 32 r/s (1,900 rpm) Axles front/rear 36/41 l (9.5/10.8 US gal)
which is mounted on the rear cab Pilot system
wall. The forces from the retractable Working pressure 3,5 MPa (508 psi)
seat belt are absorbed by the seat rail. Cycle times
Standard: The cab structure is tested Raise* 5,4 s
Tilt* 2,1 s
and approved according to ROPS (ISO
Lower, empty 2,5 s
3471) and FOPS (ISO 3449). The cab
Total cycle time 10,0 s
meets all requirements according to ISO
6055 (Operator Overhead Protection * with load as per ISO 14397 and SAE J818
- Industrial Trucks) and SAE J386
(Operator Restraint System).
Emergency exits 1
Sound level in cab
according to ISO 6396 LpA 68 dB (A)
External sound level
according to ISO 6395 LwA 106 dB (A)
(Directive 2000/14/EC)
Ventilation 9 m3/min (318 ft3)
Heating capacity 11 kW (37,500 Btu/h)
Air-conditioning (optional) 8 kW (27,300 Btu/h)
11 (L120E)
SPECIFICATIONS
Tires: 23.5 R25 L3
Where applicable, specifications and dimensions
Standard boom Long boom are in accordance with ISO 7131, SAE J732, ISO
7546, SAE J742, ISO 14397, SAE J818.
B 6540 mm 21'6'' 7040 mm 23'1''
C 3200 mm 10'6''
D 400 mm 1'4''
F 3360 mm 11'0''
G 2130 mm 7'0''
O 55 °
Pmax 49 °
R 42 ° 43 °
R1* 47 °
S 66 ° 63 °
X 2060 mm 6'9''
Y 2680 mm 8'9''
a2 5730 mm 18'10''
a3 3060 mm 10'1''
a4 ±40 °
A 2,4 m2 25,8 ft2 Operating weight (incl. logging cw 680 kg (1,500 lb)):
20 650 kg (45,520 lb)
B 3570 mm 11'9''
Operating load: 6400 kg (14,110 lb)
C 1860 mm 6'1''
D 2940 mm 9'8''
E 1480 mm 4'10''
F 1540 mm 5'1''
G 2780 mm 9'1''
H 4690 mm 15'5''
I 6710 mm 22'0''
J 2750 mm 9'0''
K 2960 mm 9'9''
L 2130 mm 7'0''
M 8810 mm 28'11''
12 (L120E)
GENERAL PURPOSE LIGHT MTRL LONG BOOM
Bolt-on Bolt-on Bolt-on Bolt-on Teeth & Bolt-on Bolt-on Bolt-on Bolt-on Bolt-on
edges edges edges edges Segments edges edges edges edges edges
m3 3,6 3,6 3,4 3,4 3,1 3,1 9,5 5,5 2,6 2,6
Volume, heaped ISO/SAE yd3 4.7 4.7 4.4 4.4 4.1 4.1 12.4 7.2 3.4 3.4
3
m 4,0 4,0 3,7 3,7 3,4 3,4 10,5 6,1 2,9 2,9
Volume at 110% fill factor yd3 5.2 5.2 4.8 4.8 4.5 4.5 13.7 8.0 3.8 3.8
kg 13 860 13 150 13 250 13 720 14 070 14 100 12 630 12 560 11 140 11 740
Static tipping load, straight
lb 30,560 28,990 29,220 30,250 31,020 31,090 27,840 27,690 24,560 25,870
kg 12 270 11 620 11 710 12 130 12 470 12 520 11 070 11 050 9810 10 380
at 35° turn
lb 27,060 25,620 25,810 26,740 27,490 27,600 24,400 24,360 21,630 22 880
kg 11 800 11 170 11 250 11 670 12 000 12 050 10 160 10 600 9420 9 980
at full turn
lb 26,020 24,630 24,810 25,730 26,460 26,570 23,390 23,370 20,770 22,000
kg 5550 5250 5290 5480 5640 5670 4980 4980 4430 4690
**Operating Load
lb 12,230 11,580 11,660 12,090 12,440 12,490 10,990 10,980 9,760 10,340
Maximum Material Density kg/cm 1540 1460 1570 1630 1800 1810 530 900 1700 1800
(100% Fill Factor) lb/cy 2,600 2,460 2,650 2,750 3,030 3,050 890 1,530 2,870 3,040
Breakout force kN 148,9 136,4 141,9 149,3 147,8 159,3 97,7 110,8 165,8 181,1
lbf 33,470 30,660 31,900 33,560 33,230 35 810 21,990 24,910 37,270 40,710
mm 8130 8420 8190 8090 8160 8000 8880 8580 8480 8370
A
ft in 26'8'' 27'7'' 26'10'' 26'7'' 26'9'' 26'3'' 29'2'' 28'2'' 27'0'' 27'6''
mm 1330 1410 1390 1280 1360 1200 2010 1720 1210 1110
E
ft in 4'4'' 4'8'' 4'7'' 4'2'' 4'6'' 3'11'' 6'7'' 5'8'' 4'0'' 3'8''
mm 2820 2760 2780 2860 2800 2910 2260 2480 3440 3520
H*)
ft in 9'3'' 9'1'' 9'1'' 9'5'' 9'2'' 9'7'' 7'5'' 8'2'' 11'3'' 11'7''
mm 5720 5800 5730 5770 5550 5620 6060 5900 6080 6020
L
ft in 18'9'' 19'0'' 18'10'' 18'11'' 18'2'' 18'5'' 19'11 19'4'' 19'11'' 19'9''
mm 1270 1320 1320 1220 1290 1150 1760 1540 1120 1040
M*)
ft in 4'2'' 4'4'' 4'4'' 4'0'' 4'3'' 3'9'' 5'9'' 5'1'' 3'8'' 3'5''
mm 1820 1850 1850 1810 1840 1770 1900 1870 2220 2160
N*) ft in 6'0'' 6'1'' 6'1'' 5'11'' 6'0'' 5'10'' 6'3'' 6'2'' 7'3'' 7'21''
mm 2880 2880 2880 3000 3000 2880 3400 3000 2880 2880
V
ft in 9'5'' 9'5'' 9'5'' 9'10'' 9'10'' 9'5'' 11'2'' 9'10'' 9'5'' 9'5''
*) Measured mm teeth
to the tip of the bucket 12 740 12edge.
or bolt-on 790 Dump12height
780 to bucket
12 820
edge. 12 870 12 670 13 This
Note: 13 120to Volvo
660 only applies 13original 13 020
080 attachments.
a1 clearance circle
Measured at 45° dump angle. ft in 41'10'' 42'0'' 41'11'' 42'1'' 42'3'' 41'7'' 44'10'' 43'1'' 42'11'' 42'9''
Operating weight kg 19 140 19 340 19 360 19 290 19 060 18 980 19 920 19 640 19 310 19 040
lb 42,200 42,640 42,690 42,530 42,020 41,840 43,920 43,300 42,570 41,980
*) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge. Note: This only applies to Volvo original attachments.
Measured at 45° dump angle.
Example: Sand and gravel. Fill factor ~ 105%. Density 2,700 lb/yd3. 3,4 m3 3,7 3,4
P 4.4 yd3 4.8 4.4
Result: The 4.4 yd3 bucket carries 4.7 yd3. For optimum stability, always
consult the bucket selection chart. 3 3,7 3,4
H 3,4 m 3 4.8 4.4
4.4 yd
Material ISO/SAE Actual 3 4,0 3,6
P 3,6 m 3
density, bucket volume, volume, 4.7 yd 5.2 4.7
5,5 m3 7.2
H 7.2 yd3
~ 1,40 ~ 2,360 3,4 4.4 ~ 3,7 ~ 4.8 9,5
12.4
~ 1,30 ~ 2,190 3,6 4.7 ~ 4,0 ~ 5.2 9,5 m3
H 12.4 yd3
Sand/Gravel ~ 105 ~ 1,70 ~ 2,865 3,1 4.1 ~ 3,2 ~ 4.3
~ 1,60 ~ 2,700 3,4 ~ 3,6 ~ 4.7
Long boom
4.4 2,6 m3
P 3.4 yd3
2.9 2,6
3.7 3.4
~ 1,40 ~ 2,360 3,6 4.7 ~ 3,8 ~ 4.9
2,6 m3 2.9 2,6
H 3.4 yd3
Aggregate ~ 100 ~ 1,80 ~ 3,035 3,1 4.1 ~ 3,1 ~ 4.1 3.7 3.4
~ 1,70 ~ 2,865 3,4 4.4 ~ 3,4 ~ 4.4 Bucket fill 674 1010 1350 1685 2020 2360 2700 3035 3370
~ 1,50 ~ 2,530 3,6 4.7 ~ 3,6 ~ 4.7 110% 105% 100% 95%
Material density (lb/yd3)
Rock ≤100 ~ 1,80 ~ 3,035 3,0 3.9 ~ 3,0 ~ 3.9 H = Hook-on P = Pin-on
The size of rock buckets is optimized for optimal penetration and filling
capability rather than the density of the material.
13 (L120E)
STANDARD EQUIPMENT • Parking brake Interior lights
• Hydraulic oil level Interior rearview mirror
Engine
• Axle oil temperature 2 exterior rearview mirrors
Three-stage air cleaner with ejector and inner filter
• Primary steering Openable window right-hand side
Indicator glass for coolant level
• Secondary steering Sliding window, right
Preheating of induction air
• High beams Sliding window, door
Muffler, spark arresting
• Turn signals Tinted safety glass
Fuel filter, extra large with water trap
• Rotating beacon Hip retractable seatbelt (SAE J386)
Oil trap
• Preheating coil Adjustable lever console
Fuel fill strainer
• Differential lock Adjustable steering wheel
Coolant filter
• Coolant temperature Operator’s seat with high backrest and electrical heating
• Transmission oil temperature Storage compartment
Electrical system
• Brake charging Sun visor
24 V, prewired for optional accessories
Level warnings: Beverage holder
Alternator, 24 V/55 A
• Engine oil level Windshield washers front and rear
Air filter for alternator
• Coolant level Windshield wipers front and rear
Exchange battery
• Transmission oil level Interval function for front and rear windshield wipers
Battery boxes, steel
• Hydraulic oil level Service platforms with anti-slip surfaces on front and
Battery disconnect switch
• Washer fluid level rear fenders
Fuel gauge
Speedometer
Hour meter
Drivetrain
Electric horn
Automatic Power Shift with operator-controlled declutch Hydraulic system
Reverse alarm
function for transmission cut-out when braking and Main valve, 2-spool
Instrument panel with symbols
mode selector with AUTO function Pilot valve, 2-spool
Lighting:
Fully automatic shifting gears 1-4 Variable displacement axial piston pumps (3) for:
• Twin halogen front headlights with high and low beams
PWM-control between different gear positions • working hydraulics
• Parking lights
Forward and reverse switch by lever console • steering system, pilot hydraulics and brakes
• Double brake and tail lights
Differentials: • fan motor
• Turn signals with flashing hazard light function
front: 100% hydraulic diff. lock, rear: conventional Boom lowering system
• Halogen working lights (2 front and 2 rear)
Boom kickout, automatic, adjustable
• Instrument lighting
Tires Bucket positioner, automatic with position indicator,
23.5 R25 adjustable
Contronic monitoring system
Hydraulic oil cooler
ECU with log and analysis system
Brake system
Contronic display
Wet oil circulation-cooled disc brakes on all four wheels External equipment
Fuel consumption
Dual brake circuits Noise and vibration dampening suspension of cab,
Outdoor temperature
Dual service brake pedals engine and transmission
Engine shutdown to idle in case of malfunction
Secondary brake system Lifting lugs
indication:
Parking brake, el.-hydraulic Easy-to-open side panels
• High engine coolant temperature
Brake wear indicator Frame steering, joint lock
• Low engine oil pressure
Vandalism lock prepared for batteries and engine
• High transmission oil temperature
Cab compartment
Start interlock when gear is engaged
ROPS (ISO 3471), FOPS (ISO 3449) Towing hitch
Brake test
Lock kit, one combination Guardrails, on rear mudguards
Test function for warning and indicator lights
Acoustic inner lining
Warning and indicator lights:
Ashtray Protective equipment
• Charging
Cigarette lighter Cover plates, rear frame
• Oil pressure engine
Lockable door
• Oil pressure transmission
Cab heating with filter, fresh-air inlet and defroster Other equipment
• Brake pressure
Floor mat Decals, USA
Automatic Lubrication System* Comfort Drive Control (CDC)* 3rd and 4th hydraulic functions
Our factory-fitted Automatic Lubrication CDC significantly reduces repetitive and Volvo wheel loaders can be equipped
System takes care of greasing while the tiring steering wheel movements. The with third and fourth hydraulic functions,
machine is in operation. This means less operator can shift and steer easily with which are operated with additional control
downtime for scheduled maintenance the aid of controls integrated in the left levers. These functions are necessary
and more time for productive work. armrest. when there’s a need to operate a third
and fourth hydraulic function at the same
time, such as when using a sweeper
attachment or a timber grapple with
hydraulic heel kick-out.
All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change
specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.