Académique Documents
Professionnel Documents
Culture Documents
IEJ1412 Sensor Node Failure Detection Based on Round Trip Delay and Paths in 2014
WSNs
IEJ1413 Differentiated Virtual Passwords, Secret Little Functions, and Codebooks 2014
for Protecting Users From Password Theft
IEJ1414 WSN-Based Smart Sensors and Actuator for Power Management in 2014
Intelligent Buildings
IEJ1415 Data Centre Monitoring and Alerting System using WSN 2014
IEJ1416 Harmful gases Wireless Network Monitoring System Design 2014
IEJ1427 A Low Cost GSM and GPS Enabled Liquid Fall Detection System for 2014
Medical Applications
IEJ1428 MEMS Based Gesture Controlled Robot Using Wireless Communication 2014
IEJ1429 Real-time Safety Measures in Railways Using Embedded System 2014
IEJ1430 Efficient and Cost Effective Vehicle Tracking and Security System Using 2014
Global Positioning System
IEJ1431 Cell Phone Operated Devices with Voice Acknowledgement 2014
IEJ1432 SMART-HELMET-FOR-MINERS-USING-WSN 2014
IEJ1433 Smart Home Automated Control System Using Android Application and 2014
Microcontroller
IEJ1434 Zigbee Based Real - Time Monitoring System of Agricultural 2014
Environment
IEJ1435 Fourth generation voting system 2014
IEJ1436 Towards the Implementation of IoT for Environmental Condition 2013
Monitoring in Homes
IEJ1437 Smart Home system using Android Application 2013
IEJ1438 Remote-Control System of High Efficiency and Intelligent Street 2013
Lighting Using a Zigbee Network of Devices and Sensors
IEJ1439 Design and Implementation of Real Time Embedded Tele-Health 2013
Monitoring System
IEJ1440 GSM Based Automatic Energy Meter Reading System with Instant 2013
Billing
IEJ1441 Wireless sensor network for multi storey building design and 2013
implementation
IEJ1442 Automated Control System for Air Pollution Detection in Vehicles 2013
IEJ1443 Intelligent House hole LED lighting system considering energy 2013
efficiency and user satisfaction
IEJ1444 Remote Control of Home Lighting Devices with RFID Identification and 2013
Current Detection of Outlets
IEJ1445 RFID-based Tracking System Preventing Trees Extinction and 2013
Deforestation
IEJ1446 A Smart Prepaid Energy Metering System to Control Electricity Theft 2013
IEJ1447 An Integrated Health Management Process for Automotive Cyber- 2013
Physical Systems
IEJ1448 Environment monitoring and device control using 2013
ARM based Embedded Controlled Sensor Network
IEJ1449 Child Activity Recognition Based on Cooperative 2013
Fusion Model of a Triaxial Accelerometer
and a Barometric Pressure Sensor
IEJ1450 Metro over head tanks monitoring system using Zigbee based WSN 2013
IEJ01 Design of Concealed Alarm System Based on GSM 2012
IEJ02 Design of Intelligent Home Appliance Control System Based on ARM 2012
and ZigBee
IEJ03 Wireless Black Box Using MEMS Accelerometer and GPS Tracking for 2012
Accidental Monitoring of Vehicles
IEJ04 Embedded Ethernet Monitor And Controlling Using Web Browser 2012
IEJ06 On the Impact of Virtual Traffic Lights On Carbon Emissions Mitigation 2012
IEJ07 Robust Railway Crack Detection Scheme (RRCDS) using LED-LDR 2012
Assembly
IEJ08 Anti-theft Security System Using GSM, GPS, RFID Technology Based 2013
on ARM 7
IEJ09 Locker Opening And Closing System Using RFID, Fingerprint, Password 2013
And GSM
IEJ13 Position Matching Based Autonomous Speed Regulation System for 2011
Vehicles
IEJ14 Study on the Embedded CAN Bus Control System in the Vehicle 2012
IEJ19 A Data Acquisition System for Methane Drainage Based on ARM 2011
IEJ25 Remote Energy Monitoring, Profiling and Control Through GSM 2012
Network
IEJ27 ZigBee Wireless Mesh Networks for Building Automation and control 2011
IEJ28 Digital Control for Home Lighting System with ZigBee Communication 2011
IEJ30 A Low Cost Design & Monitoring Of Automatic Irrigation System Based 2013
On ZigBee Technology
IEJ32 Automatic Measurement and Reporting System of Water Quality Based 2012
on GSM
IEJ33 Ultrasonic Spectacles and Waist-belt for Visually Impaired and Blind 2012
Person
IEJ34 The Design And Implementation Of ID Authentication System Based 2011
On Fingerprint Identification
INNOVATIVE PROJECTS
MIN02 Designing of smart and secure single ATM card for multiple bank accounts
MIN03 Real-time vehicle theft control system using engine temperature measuring
technique
MIN04 Smart electronic feedback system to save paper and time using RFID technology
MIN05 Innovative digital energy meter with over load indicator and power theft control
MIN06 RFID technology based reminder system for smart home
MIN07 Designing of switching system for AC powered appliances using micro controller
MIN08 Automatic speed regulation of vehicles based on speed zones using RF technology
MIN09 Advanced Smart energy saving system for modern railway station platform lighting
control
MIN10 Designing of user friendly paper presentation control system using RF technology
with LASER light pointer
MIN12 Design of Concealed Alarm System Based Security system for Banks and shopping
malls using GSM
MIN13 RFID technology based system which detects the icons beside the road for safe
driving
MIN14 Controlling multiple streetlights with single SMS with failure street light indication
via SMS
MIN15 Advanced low cost voice recognition based robot direction control using android
MIN16 Designing of Electric shock proof system to control electrical appliances using
touch screen
MIN17 Remote operated Smart electronic voice guider for physically disabled/bed ridden
patients or old age people
MIN18 Voice operated low cost Instant status or notice updating system using android
MIN19 Electronic security and tourist guider in multiple language for museums and
exhibitions
MIN20 Monitoring of patients via secure and mobile health care system using GSM
MIN21 Design of accurate universal digital clock using GPS for time synchronization
applications
MIN22 Design and development of Touch and Voice based electronic slate for Kids
AS1402 Voice operated low cost Instant status Voice operated low cost Instant status or notice
or notice updating system using updating system using android
android
AS1403 Android phone controlled user Controlling pick and place robot using android phone
friendly pick and place robot
AS1404 Advanced digital calling system in In this we can call particular person just by touch
offices and colleges using android respective key on android application
phone
AS01 Smart Remote for controlling With this we can control any electrical appliances with
electrical appliance through android our android phone; no need of another remote .It is
mobile. safe and secure.
AS02 Virtual nurse- controlling wheel chair With this the patient can easily control his wheel chair
through android mobile through simple and smart touching of android mobile
AS03 Advanced android mobile controlling With this we can easily control robot direction
robot through simple and smart touching of android mobile
AS04 Smart and cost effective wireless In this we can easily update messages in LED
electronic notice board message scrolling boards through android mobile. Whatever the
updating system from android mobile message we type and send that will be displayed on
your electronic notice board. It is very useful project
for college applications
AS05 Accelerometer/MEMS based robot In this we will control robot direction by moving
controlling through android mobile android phone in respective directions. The robot
follows the direction in which the android phone is
kept
AS06 Android mobile controlled voice In this the services will be indicated through voice so
guider for patients/old aged that nurses or care takers can come to the patient to
people/dumb people provide service to him. The patient has to touch
respective button in android phone depends upon his
requirements, and then respective voice will be
played. In this the patient can also control some
appliances like fan ,lights.etc
AS07 Smart Home/office automation With this we can control any electrical appliances in
through android mobile. home or office or industry with our android phone, no
need of another remote .It is safe and secure also
AS08 Advertisement boards or status This is very useful project for offices ,some shops and
boards message updating system restaurants to display their offers and status messages
from android mobile for offices and like OPEN,CLOSED,LUNCH TIME,MEETING
restaurants. TIME, HOLIDAY, etc. The user can easily modify the
messages from android mobile.
AS09 Smart regulator for controlling fan With this we can control speed of fan or AC from our
speed through Android mobile android mobile
AS10 AC motor speed controller through With this we can control speed of AC motor from our
Android mobile. android mobile
AS11 Advanced street light controlling In this we can control street light from anywhere
system through smart phone through smart phone
AS12 Smart phone based patient With this we can monitor patient condition or our old
monitoring system aged person’s condition through smart phone.
AS13 Industry/home/office automation With this project we can control any electrical
through smart phone appliances of office or home or industry from
anywhere by using Smart phone.
AS14 Industrial parameters monitoring We can monitor different parameters like temperature,
system through Smartphone voltage, etc through online using smart phone from
anywhere
It supports up to 3 meters.
VP02 Real time voice based station This system gives the voice alert of coming station
name announcement system in name to passengers. Whenever the train receives the
trains or busses to alert the information of coming station with the help of RF, then
passengers using ARM7 and it compares that data with already stored data and plays
RF. respective voice.
VP03 Virtual care taker-voice guider If some person is not in a position to speak for basic
for patients/old aged and emergency needs like water, food, medicine, milk,
persons/dumb persons. etc, then this system helps them to tell their needs with
voice alert. In this project the users can simply
communicate with their care takers just by giving input
to this system, then this system plays respective voice
module in speaker so that the available person can
come and help the users. The input to this system can
be given from normal keys or touch screen or remote.
VP04 Industrial safety and security This system will give voice alert to workers in industry
system with voice alerts and for safety and also message alert to owners when
message alert through GSM. something goes wrong like fire accident, gas leakage,
over temperature, entering into no access zone, etc.
VP05 Bank token display system This system will display the counter number and token
with token and counter number number to be served at that counter, the same
announcement feature. information also will be announced thorough speaker.
VP06 RFID based attendance system This attendance system will give voice confirmation of
with welcome voice messages. attendance and also announces the name of user with
welcome messages.
VP07 Embedded Secured elevator This system will not only provide security and also
system with voice confirmation provide some voice alerts like floor number, door
of floor number and alert opening and closing status, fire accident information,
messages etc.
VP08 Home /office/industry In this we will switch off and switch on any electrical
electrical appliances appliances just by calling to this system and press some
controlling by phone call and buttons using DTMF technology. This system also
confirmation through voice sends voice feedback of device status that is whether
feedback. device is on or off.
VP09 Bank safety and security This system will give voice alert to employees and call
system with voice alert and call alert to police station when something goes wrong like
alert to police station through fire accident, entering into no access zone, etc.
GSM.
VP10 Speaking clock-Time This system is very useful for visually impaired
announcer for visually persons to know the current time. This system plays the
impaired persons current time whenever you want.
VP11 Color recognition and color This system will recognize object color and plays that
colleges and event entered from key board and this data will be stored in memory
management systems card in a file format using ARM7 micro controller.
FS06 Mobile signal strength This system is useful for mobile signal strength survey report.
analyzer in different areas We will measure signal strength of particular GSM network in
to identify poor signal that areas and store that information in memory card for
strength areas using GSM further report.
and GPS
FS07 Biometric based secured This is a standalone attendance system. In this we will store
real-time attendance system the employee or student IN and OUT times with date in excel
with data storage in format. This system is more secure and reliable.
SD/MMC card for offices
and colleges
FS08 Advanced embedded This system will take the pictures and save those pictures in
security system with image JPEG format in memory card. This can be used in banks,
capturing in SD/MMC card industries ,traffics signal junctions, homes, in vehicles, etc.
CN04 Distributed remote In this we will measure the temperature and control the
temperature monitoring and process according to temperature using CAN.
acquisition system based on
CAN bus.
CN05 Construction of intelligent This system always keeps constant temperature and light
greenhouse monitoring and intensity for green houses.
control system based on
CAN bus (IEEE2010).
CN06 Industrial multi parameters In this we will measure and keep display the data of
data logger using CAN bus. different parameters of industry using CAN protocol
CN07 Automobile dashboard In this we will measure different parameters of vehicle like
implementation using CAN speed, fuel level, etc and also we will control airbag
bus.
CN08 Implementation of can and This can be used to monitor and control industries
ZigBee networks based effectively .In this we are using CAN protocol and ZigBee
industrial monitoring and wireless system.
control applications
using RFID rate and expiry date of the product will be displayed so that
we can do the shopping within our budget
RT11 Elegant home with power In this we will provide multi features to home like remote
saving, security, safety, controlling of home appliances ,auto controlling of lights
remote controlling and auto depends upon sunlight and auto controlling of water tank
control of water tank motor motor when tank is full and alert the user when intruders
come or when gas leakage or fire accident occurs
RT12 Intelligent train engine to In this we will control the train by monitoring the driver’s
avoid accidents and position or activeness and the gate will b e controlled
controlling railway gate automatically when train is near the gate.
automatically
RT13 Vehicle theft control and This project provides security for your vehicles, with this
accident location intimation vehicle will be controlled by only owner’s permission and it
through SMS also sends a message of vehicles location when it meets
with any accident
RT14 Intelligent traffic signaling The traffic signals will be controlled automatically when any
priority system for ambulance or VIP vehicle sends a request with indicating
ambulances and VIP their root
vehicles
RT15 Automatic marks sending Whenever the authorized student sends a message to this
system to students through system it send the students marks through SMS
SMS
RT16 Automation of tollgate and This system automatically collects the toll tax and allow the
blocking of unauthorized vehicles if they pay sufficient tax .it also checks whether
vehicles particular vehicle has permission or not to go out.
RT17 Electronic health card This system completely reduces the paper usage. Medicines
prescribed by the doctor and patient test reports are stored in
this card .this card can be used for future reference in any
hospital
RT18 Bus departure indication With this we can come to know whether particular bus
and auto announcement arrived or not
system in bus stops, useful
in rural bus stops
RT19 Child safety management With this project we can easily identify if any child crosses
system using RF predefined area. This is useful in kid care centers, apartments
Technology. and in schools
RT20 Cost effective energy It collects the data from each house in apartment and
billing system. generates the bill according the charges at that time through
Zigbee and sends the message to electricity board. It also
disconnect the power if bill is not paid before due date
RT21 Advanced bus ticketing This module is equipped in bus. Passengers has to take the
system with alert to ticket using smart card while taking ticket money will be
passenger deducted and their destination will be saved. Whenever bus
reaches their station it automatically indicates to the driver
till they get down in that station
modem
GG03 UPS Battery monitoring Voltage of battery is continuously monitored and send a
system over GSM for message when it is about to reach below cut off levels.
High availability system
GG04 GPS based border alert In this we will intimate the fishermen when they cross their
system for fishermen borders using GPS
with boat speedometer
GG05 Automatic power meter power consumed is measured by power meters and this data
reading system using is sent to electricity board through SMS
GSM network
GG06 RFID and GSM based This system sends a message to user when his courier
intelligent courier reaches its destination
mailbox system with
automatic delivery
notification
GG08 A smart GSM based In this the patient heart beat and temperature will be
embedded solution for monitored continuously and sends a message to relevant
continuous remote persons when abnormal state is occurred
monitoring of cardiac
patients
GG09 GPS based vehicle travel In this we will store the locations latitude and longitude vales
location data logger with traveled by the vehicles with time stamp in memory card
2GB MMC/SD Memory
card
GG10 GPS and GSM based This system sends a message to the owners when the cab
office cab monitoring, reaches its destination and also send the present to the
alerting and logging employees who travel in that cab
system
GG11 Flexible load sharing of It continuously measure the load current and it
transformer with GSM shares this load with another transformer when the
SMS load is more and send an alert through message. The
user can also share directly whenever he wants just
by sending message
GG12 GSM Based Smart The system provides the information about the lost ATM
Information System card to his mobile. The user receives a message whenever
For Lost ATM Cards this card is placed into an ATM machine or used in any
banks.
GG13 Vehicle Tracking and The project is designed to track the vehicle using GPS and
Security System using send the information of the vehicle to the user mobile using
GSM and GPS GSM.
GG14 Agriculture field motor Motors in the field are controlled with the help of predefined
control system using SMS.
GSM
GG16 Accident The project designs a system that tracks the vehicle
Identification System continuously and if the vehicle is met with an accident, the
using GSM And GPS system immediately identifies this and sends an SMS to the
family members or to the doctor.
GG17 Patient Monitoring and Monitors the health of a patient through SMS.
Alert System using
GSM
GG18 Home Security System Providing security to the homes using GSM
using GSM
GG19 Industrial Electrical By this project, we can control the devices in the industries
Devices Control System by sending predefined SMS to the controlling unit.
GG20 Automatic Fire Alerts when fire accidents occur to a predefined number.
Detection and Alert
System
GG21 Weather Monitoring It is useful for gathering the environment variables from
system in remote places remote geographical areas for prediction of the weather.
GG22 GSM based DC The speed and direction of DC motor can be controlled by
Motor Speed and sending predefined SMS to the system
Direction Control
GG23 SMS Based Electrical The status of electrical appliances can be monitored
Appliances continuously and can be altered by sending predefined SMS
Apparatus Control in to the controlling unit.
homes or offices
GG24 Embedded Automatic The robotic car can be controlled and can be made to move
Robotic Car through in a particular direction by sending predefined SMS to the
SMS unit controlling the direction of the car.
GG25 Electricity billing Billing the electricity units consumed and sending the bills
Using GSM. using GSM.
GG26 Substation Monitoring The temperature, voltage and current in the substation are
and Controlling System measured and sent to the user and alerts the user when they
using GSM are over loaded.
GG27 Water reservoir Water level in reservoir is measured and pumping system is
monitoring and pump controlled through SMS
system using GSM
GG28 Industrial Data Logger The parameters like temperature, intensity voltage and
using GSM current are sent to the user.
GG29 Speed Control of The speed and direction of AC motor are controlled using
Thread Roller’s AC TRIAC and GSM modem in this project.
motor in Spinning
Mills using GSM
Modem
GG30 Real-time Industrial Controlling the industrial processes and checking the status
process controlling & of the processes whenever necessary using GSM mobile.
monitoring using
Mobile
GG31 Intelligent System The system uses sensors for gas detection, human entry and
for Hazardous Gas, to monitor the temperature. Whenever these sensors trigger
Human Detection and from their normal behavior, the system immediately sends an
Temperature Monitor SMS to the user mobile.
Control using GSM
GG33 Marks Announcement The student’s performance can be sent to their parents by the
through SMS lecturers using this project.
GG34 Cell Phone based The on and off controls of the street lights can be done using
Street Light GSM technology.
Controlling System
GG36 Password protected Controlling the devices from remote places only by
GSM based Device authorized persons
control.
GG38 GSM controlled Door Security is provided in the restricted areas using GSM
Latch opener with technology. The door of the restricted areas can be opened
Security Dialup with only by sending predefined SMS to the controlling unit.
changeable
Telephone number
GG40 GSM based Vehicle The project aims in designing a system that would detect if
gaseous fuel leakage there is any fuel leakage from the vehicle and if so, activates
detection with the alert system and also sends as SMS to the user mobile to
Automatic safety warn the person to take immediate measures.
warning and alerting
system.
GG41 SMS based Banking In this project we are providing security to the banks.
security system Sensors are arranged to read the status of different
parameters. If the sensors trigger, a predefined SMS will be
sent immediately to the user mobile by the controlling unit.
GG42 Home Automation Providing security and controlling the devices in the home
and Security System using GSM is carried in this project.
usingGSM
FP4 Fingerprint based By this project, the attendance of the persons either in the
Attendance Record academic institutions or in the offices is maintained.
System
FP5 Finger print based Only authorized persons are allowed to access the lift controls.
elevator(lift) operating
system
FP6 Fingerprint based This system can completely eliminate rigging and false votes.
Electronic Voting
Machine
FP7 Fingerprint based The devices are controlled only when the authentication is proved
Authentication and and the system accepts the fingerprint of the user.
Controlling System of
Devices
FP08 Locker opening and With this we will provide more security system for our lockers.
closing system Here we are implementing three level security system
Using RFID,
fingerprint, password
And GSM
ZIGBEE TECHNOLOGY
ZB11 Zigbee Wireless Vehicle Identification Identifying the vehicle and allowing the
and Authentication System. vehicle into the secured premises only
when the system received the signal from
the central processing unit.
ZB12 Applications of Short Range Industrial devices are monitored and
Technologies to Industrial Automation: controlled using Zigbee Technology
A Zigbee Approach
ZB13 The Wireless Sensor Network for Various sensors are used to monitor the
Home Care System using Zigbee home continuously and if any sensor
triggers, the system immediately passes
this information to the user using Zigbee.
ZB14 System for Measuring Power This system measures the power from
Parameters with Zigbee Connectivity. each home and sends to central system
which is useful in apartments.
ZB15 Wireless Data Encryption and Which used in security applications
Decryption Using Zigbee
ZB16 Zigbee Based Automated Irrigation Using Zigbee this system controls the
System. irrigation system automatically.
ZB17 Zigbee enabled pantry updating This system reduces the man power and
wireless network and data makes the pantry order and delivering
synchronization using hand held process fast. As the person entering the
device. data it will be updated immediately in
pantry so that they can start the process
immediately
BL2 Remote controlled home With this we can control home appliances like lights, fan,
automation using motor, etc through Bluetooth. This is safe and secured.
Bluetooth.
BL3 Bluetooth based industrial This project measures different parameters in industry like
data acquisition system voltage, current and temperature and transmit this data to PC
continuously through Bluetooth.
BL4 Industrial devices With this we can control industry appliances like machines and
controlling system using motors through Bluetooth. This is safe and secured.
Bluetooth
BL5 Intelligent electricity This system receives the units consumed from various meters
billing system using and generates the bill accordingly. This saves the cost, time and
Bluetooth. manpower.
BL6 Wireless secured data With this we can transfer data between two systems with
transmission security
TS2 Touch screen and Which useful for patients and aged people ,this system plays
Zigbee based voice respected voice messages depends upon the button the user
guider for patients touches
TS3 Touch screen based The robot can be controlled just by touching keys and this robot
remote controller robot having wireless camera on it to monitor that area
with wireless camera
TS4 Touch screen based We can control the PC using this wireless device .We can open the
wireless PC controller folders, shutdown the system, etc.
TS5 Touch screen based We can control the home appliance just by smart touch
smart home
automation
TS6 Touchpad-Controlled- In this we can control car using touch screen
Vehicle-a-Car-in-
Future
detection for drivers upon vehicle distance and also gives the special sound when object
is detected at back side if vehicle moves backside and this system
only allows for driving if driver does not consume alcohol
SB2 Smart blind stick with This stick gives different sound intensity depends upon the object
ultrasonic sensor distance from person or we can play some voice also depends
upon distance.
SB3 Long range liquid level With this we can measure levels up to 3 meters range
measurement in
chemical industries.
SB4 Automatic bottle This system automates the bottle filling system by controlling the
filling system. motor and conveyor belt
SB7 Intelligent system for This is a intelligent security and safety system for industries. If
hazardous gas, human anything goes wrong then it sends a message to user numbers
detection and immediately
temperature monitor
control using GSM
technology.
SB8 Temperature and light Incubator maintain constant temperature and light intensity. In this
control of an incubator. we will control the temperature and light intensity to maintain
constant environment
SB9 PIR sensor based This project is used to save the power in conference halls and in
power saver for auditoriums. When there are no persons in the hall, then lights and
auditorium and fans will be switched off automatically.
conference hall.
SB10 Brick sorting using With this we can separate the bricks according to their color. We
color sensor. can use this project for medicines separators also.
Patient safety system In this we will monitor the patient parameters like heartbeat and
SB11 using heart beat and temperature
temperature
monitoring.
Intelligent security and This project detects fire accidents, gas leakages and also alert
SB12 safety system for through SMS when main door is closed without closing any other
colleges and industries room entrance or if any other door is opened without opening
main door
SB13 Ultrasonic Spectacles This project is design to help blind people to guide them
and Waist-belt for effectively while walking
Visually Impaired And
Blind Person
SB14 Intelligent-Two-Axis- This new tracking system will acquire more power from Sun using
Solar-Tracking- two axis solar tracking
System-with-
Mechanical-
Application
SB15 Microcontroller based This projects is used to measure the liquid level more accurately
toxic liquid level using ultrasonic sensor measurement method
monitoring control
system
M2 Hand movement You controlled your PC using your hand movements, like curszor
recognition System Based scrolling and folder opening and closing
Mouse With MEMS
Accelerometer
M3 Fall Detection & Activity We can monitor elders and patients and also we can detect and
Monitoring For Oldsters intimate if they fall
RFID which detects the This system is used to give automatic information about speed
RFID15
icons beside the road breakers, road turns, etc.
RFID01 Student college alert This system sends a message to the parents when the student
system to parents by their come to school or college
entry at the college
premises by using RFID
and GSM SMS
technology
RFID based Shopping With this we can save billing time and instantaneously the rate of
RFID02
trolley the product will be displayed so that we can do the shopping
within our budget
Examination room guide This system will show you the block and room number that is
RFID03
using RFID for the
allotted for you in exams
jumbling system based
EXAMS
RFID04 Voter Credentials System The user, whoever wishes to poll his vote, has to show his voter
using RFID Technique card at the time of polling. The system compares the card
information with the already stored database and if matched, the
system allows the user to poll his vote. The voter cards issued to
the user will be written with an unique number. This number does
not match with any other user.
RFID05 RFID based attendance In this a RFID card is issued to the each person. With the help of
system this card, the respective person’s attendance is recorded and
displayed whenever required.
RFID06 RFID based Highway The project aims at providing the ultimate solution for the people
Toll Collection travelling on the highways to operate the toll gates. The system
enables the drivers to travel on the highway roads while
simplifying and collection of toll tax.
RFID07 RFID security access Authorized person will be given a card. The system check for this
control system card.
RFID08 Library management The responsibility of managing the books, the issue and return of
system using RFID the books to the students is carried out in a more efficient way
using RFID technology.
RFID09 Bus location This system gives the information about whether the bus is
announcement system arrived or departure.
RFID11 RFID based Ration Card The user can buy the grocery items from the ration shop using the
smart card based ration card.
RFID12 Prepaid Energy meter The user has to make an advance payment before using the
electricity. He has to purchase the prepaid card and recharge the
energy meter fixed in his/her house with the units in the card. He
can utilize the electricity until the units are zero. If the available
credit is exhausted, then the supply of electricity is automatically
cut.
RFID13 RFID based Car Parking It aims at effective parking of the cars, deducts the fare for the
System parking of the car from the card available with the user.
RB1 Intelligent metal This robot gives the alert when metal or fire detects
detection and fire alert
robot
RB2 SMS operated Robot We can operate this robot by sending SMS from anywhere in
the world
RB3 Security guard with This robot continuously monitor some area and sends video of
camera and night vision that place ,this robot has night vision light also
light
RB4 Intelligent Fire This robot operates the fire blower when fire accident is
extinguisher vehicle occurred
RB4 Intelligent obstacle This robot takes diversion automatically when object is
detection and avoidance detected
robot
RB5 Pick and place robot With this robot we can pick the objects and place in some
controlling with wire or another place
wireless
RB6 MEMS based robot. This robot will be operated by hand movements using MEMS.
RB7 Smoke and LPG Gas This robot will detects the Gas leakages
detection robot with
wireless control.
RB8 Wireless Voice and This robot will transmit the voice and image of the data
image transmission robot
for surveillance system
SC2 Unmanned petrol bunk A card is given to the user which has some money. The amount is
system. deducted when petrol is bought.
SC3 Vehicle Parking Vehicles are parked based on the smart card where the details of
System Using Smart parking time is stored
Card
SC4 Prepaid energy meter In this, the user has to recharge with some number of units. These
using smart card units are available in smart card based recharge card.
SC6 Smart card based The person is given id card which contains his particulars. Based
attendance system on this card, his attendance is recorded and stored.
SC7 Smart Card Based Security is provided in restricted areas using smart card
Security Access technologies. The persons are checked with their card information
Control System with the already stored information in the system and are only
allowed into if the card is an authorized one.
SC8 Hospital Management The people who make visits to the hospitals are issued health
System using Smart cards. The card when inserted into the reader gives the entire
Card details of the patient holding the card. The details include body
temperature, pulse rate etc.
SC9 Prepaid Card For The people using the net cafes for browsing are issued with these
Internet Browsing cards. The system records the in-time and out time of the user
System into the net browsing center and deducts the amount from the
card automatically according to the timings. If the balance is low
or nil, the user has to recharge the card to have the access of the
internet browsing.
RF BASED PROJECTS
code Title of the Project Description
RF14 Automatic vehicle speed The idea of the project is to install a microcontroller
control and check point based circuit inside cars to control the speed as well
logging system. as to transmit information about car as well as the
driver. The project consists of a microcontroller
based board that is to be placed inside the car and
another (several) microcontroller based board(s) to
be installed along the route.
RF1 Wireless Electronic Notice We can send the data to be displayed to the notice
Board using RF boards from the office itself.
RF2 Wireless Data Encryption and In this project, we will encrypt the data at the
Decryption for Security in transmitter end and at the receiver end we will
Army Applications decrypt the data to retrieve the original data.
RF3 RF based industrial The industrial loads like motors, coolers, etc are
Automation System monitored and controlled by a RF remote.
RF4 Advanced Vehicle Access An automated check post system is designed to check
control system the vehicles trying to enter into the secured premises.
The system allows the vehicles to enter into only
after the authorization from the processing unit.
RF5 Patient Monitoring using RF. The details of the patient will be sent to the doctor
continuously in a wireless fashion and the doctor can
take immediate action whenever necessary.
RF6 Wireless Intrusion Detection, Designing a system that detects if anything goes
Electronic Security and wrong in an area, provide security by activating the
Control System using Central buzzer and monitor the area continuously.
Monitoring System
PC BASED PROJECTS
PC1 Power Management System in The various appliances in the hotels are controlled
Hotels using PC by giving commands from the PC.
PC2 PC based Manual Guided Vehicle The movement of the vehicle is controlled by giving
using RF wireless technology commands from the PC and these commands are
transmitted through RF. The vehicle at the receiver
section will be controlled by the commands
received.
PC3 PC based Hi-tech Home We can control the home appliances just by sitting
Implementation in front of PC.
PC4 Industrial Automation using The industrial appliances are controlled by the
PC commands issued from the PC. The controlling unit
receives these commands from the PC and controls
the devices according to the commands.
PC5 Industrial Data Acquisition The various parameters like temperature, humidity,
System using PC current, voltage are read from the sensors and
displayed in the PC for future studies
PC6 Wireless Notice Board using The data to be sent to the notice board will be sent
PC from the PC. This data will be displayed on the
notice board using wireless RF technology.
IR BASED PROJECTS
IR7 Advanced Embedded Automatic This system automatically allows the cars to be parked
Car Parking System according to the space available in the cellar.
IR8 Time Measurement System for This system measures time for Athletics to reach the
Athletics target point
IR9 Remote controlled digital clock or The time or fares can be changed and displayed using
fares display using IR IR remote.
IR12 Shopping Malls Security and The design of security and the method of consuming
Power Management System the power in the shopping malls are carried out in this
using IR. project.
IR14 Data Transfer between two The project aims at designing a system which enables
Microcontrollers using IR the data transfer between two microcontrollers in a
Communication wireless fashion.
IR15 Anti-Theft Alarm System In this project, an alarm system is designed and will be
activated immediately whenever the sensors trigger to
indicate that something is going wrong.
IR16 Intelligent Object Counting The project is designed to count the number of objects
System in a certain area and display it.
MC2 The Smart Medical By using this project, we can remind the patient to take
Refrigerator the medicine at prescribed timings.
MC3 Embedded Green The temperature and light intensity are controlled in green
House Automation houses.
System
MC4 Substation This project aims at continuously monitor the load
Monitoring And conditions of the substation. If the load exceeds the rated
Controlling System capacity, the controlling unit automatically shuts down the
substation.
MC5 Implementation Of This project is designed to prevent rigging up to
Electronic Voting maximum extent. The controller section continuously for
Machine Via Data the input. Once the input is taken, it does not take the
Retrieval System input again until it gets the access from the supervisor
control.
MC6 Touch Me Not A Fun This project is mainly designed as Events to be conducted
Game at Exhibitions, Fetes etc. This project includes different
interfacings with the microcontroller.
MC7 AC motor speed The speed of AC motor can be varied rapidly on and off
control using TRIAC by TRIAC.
MC8 Phase Sequence The controlling unit continuously whether 3-phase is
Indicator and coming from the line or not so as to run the motors which
Controlling System run only with 3-phase. If 3-phase is not coming, the
controlling unit automatically shuts down the system.
MC9 Boiler Monitoring The temperature is measured and controlled for the
and Control System industrial boilers.
MC10 Involuntary Industrial The power management in the industries can be done
Power Scheduler effectively using this project.
using Embedded
System
MC12 Power Saver for This system switches on the lights only at preprogrammed
Advertisement timings using RTC thus saving the power up to the
Hoardings using maximum extent.
RTC.
MC13 Solar Tracker for The project aims at designing a system that would sense
acquiring maximum and follow the position of the sun and rotate the panel in
power the direction of the sun to obtain maximum power output.
MC14 Automatic Liquid The controlling unit detects the choice of the soft drink
Dispensing System pressed by the user and starts dispensing the liquid when
used in Tea/Coffee, the cup is placed on the tray of the vending machine.
Soft drink Vending
Machines
MC15 Water Scheduling Water supply to different localities is done on time basis.
for Municipalities The supply will be automatically cut once the time
allotted to that particular locality lapses.
MC16 Electronic Security This system provides security to the homes or offices by
System for interfacing sensors with the controlling units. If anything
Homes/Industries goes wrong, the system automatically dials up to the
with auto dialer predefined number and also activates the alert system