Appendix: 4 Bill of quantities
item item Description J sins | un
Provision of Technician for Conducting
Field density test with FDT Tools andlor Concrete Pouring [*ST™ 01956
1 Inspection “(Cubes Preparation, Concrete Slump, | asrmciaa
Temperature) aN!
4 [Monthly Basis (8 tae 6 days per week with Month
[Monthly Basis (8 Hours per Day¥® days per week without .
Transportation ‘Month
3 [On Visit Basis (Max 4 Hours Max 4 test per visit) On week
|days (7am - 3pm)
3.1 [Additional Test | No.
5 lon a vs
ery 7
Visit
5 |Collecting g4mple from site
Visit
6 Overtime Will be Charged as Per Kuwait Labor Law
LABORATORY SOIL TESTS _
1 |Gradation (sieve)
astmp422 | No.
2 [pts index and Liu Lint asrmoseie | No
- -
3 [Precorasra 1687 Asmiorssr | No
4 [car Sootes | asrnoiess | no
5 [car Unsooked asrworees | No
6 [Chloride Content BS 1377 - Part 3 |
:
Sulphate Content BS 1377 - Part 3 I
[Plate Load Test (Reaction Load to be arranged by
[Contractor )
las 1377-Pen3| No
18S 1377 -Pen3|_ No,
ast 1194 | No,item
{Bitumen Content and Gradation (Extraction)
ASPHALT TESTS
|Thickness. density and relative compaction (withaut coring) |
[Asphalt Coring (min. 3 nos. core per visit)
[Additional Core
Item Description Standard Unit
Nl |CONCRETE TESTS = . al
1 concrete Compressive Strength of Cube |
2__}schmiat Hammer Test (min 10 test per visit [asta cos. | visit
4 outa Coring 4* dia 30 cm depth (min. 3 nos. core per stu cazicae| visit
| 4 ational core faa al |
|» Nieerstemionestercmecteabe cum enn | estes | io
7 Acid Solube Chloride Content (by weight % of Concrete) bs 1881-124 | No,
€lhs#Suphate Govier 808 by wont ofCanzce) | oorwesrae | no.
18 [Cement content BS 1861-124 No. |
WW |Rock Test
1 |Apparent Specific Gravity (Oven Cried) No
'Water Absorption ASTM 0 6473 | No.
10% Fines BS 812-111 No. |
unconines Compressive Sena |astuoze| No
pagnesiam Suiphts Sourdness asTuces | No
AASHTO.T166,| No
AASHTO
tisatzo | (NO
AASHTO T230| visit |
No.Item Description
Standard | Unit
|AGGREGATE TESTS
|Specific Gravity and Absorption
ASTM
erz7ici28
2 jieve Analysis ASTM C136, No,
3 Fineness Modulus asTwci3s | No.
5 [Clay lumps & Frible Materials ast ctaz | No.
6 Organic mpurties astwico | No,
8 Sulphate Content e8612-118 | No.
ross angeles Abrasion Test haiwenet |_ No
| 10 Ratio of LA at 100 & 500 Revolution jastwcta: | No
11. lakiness Index g8812 | No
| 12. [Elongation index - 1 “asei2 | No.
{ ASTM 02419 No.
ee
esas | No
2 [Sulphate as S03 ( ppm) gss48 | No
3 [Chloride as C1 ppm) as3148 | No
4 (Chloride as NaCI ( ppm) Bs3148 | No.
5 fos Coen a ie
6 [Alkali HCO3 / CO3 (ppm) BS 3148 | “No
Vill [STEEL REBAR TESTING It
| _1 Tensile, Vield & Elongation Testing (8 bars per set) asta Pet
[Bending Test (3 bars per sel)
ABI5IA370 Set
[Additional 60% of test Value is added for bars of Diameter greater than 28 mm for iteritem
Item Description
1X | GEOTECHNICAL INVESTIGATION
‘K| Field Work
1. | Setting out of boreholes with coordinates (KTM) &
elevations (PWD)
2
SPT @ 0.5m intervals to 2.0m depths thereafter @ 1m
intervals till end of boring with collecting disturbed and
undisturbed samples & measuring Ground water level
Tnspection pits upto 7.5m depth to check for UIS
utility prior to diling of boreholes
BH
4 | Electrical Resistivity Test @ 1,2,3,5,10m |
"_p _| SOILLABORATORY woRK
"1 | Particle Size analysis by Sieve test and natural |
moisture content test (NMC) oe
2 | Atterberg Limits (Plaste Limit, Liquid Limit and ASTM | no
Plasticity Index) olste-84)
| ~ 7 1
3 | Bulk and Dry Density CS eK
Chemical Analysis (pF, Sulphate & Chloride
| part2, 1890) |
| capacity of soll & recommendations
l
28 1377, Part |
content) in Soil 38 |
t
5 | Direct Shear Test | ots |
: - 7
& | Thermal Resistivity Tet ASTM 0524
| REPORT
| Submitting geotechnical report with bearing Hl