Académique Documents
Professionnel Documents
Culture Documents
Posting Penulis
Flashing Guide
Thread baru
[Guide] Flash Fastboot ROM through Command Prompt. Shuhail
Mi FC Pres
2016-06-15 01:08:23 61419 120 Pilihan
Followers Threads B
485 15
Edited by Shuhail Basheer at 2016-06-16 03:15 AM
Follow
Ola Mi Fans
I have seen many people saying they are not able to fastboot flash their devices through Mi Flash Tools
saying they are getting errors while trying to flash.
So I got a 100% solution for those guys. Fastboot Flash Through CMD-Prompt.
*****REQUIREMENTS*****
1. A Mi/Redmi Device Obviously . :P
2. USB Data Cable.
3. Specific Fastboot ROM for your Device. You can get it from here : - http://en.miui.com/a-234.html
4. A Windows PC.
5. Drivers for your Device. Just install Mi PC Suite for it. You can get it from here : - http://pcsuite.mi.com/
6. Minimal ADB and Fastboot Installed in your PC. You can get it from here : -
minimal_adb_fastboot_v1.1.3_setup.zip (2.09 MB, Downloads: 2133)
7. Winrar or 7zip for extraction. (My Preference Winrar)
*****NOTE*****
1. Please do not forget to take a backup of your device and save it in the computer or an external device.
2. Keep your device at least 50% charged.
3. Follow the given below instructions carefully.
*****PROCEDURE*****
http://c.mi.com/thread-334-1-0.html 1/6
1/23/2018 Flash Fastboot ROM through Command Prompt. - Flashing Guide - Mi Community - Xiaomi
Posting Penulis
Thread baru
Pilihan
3. Open the images folder and select all and copy paste the files to Minimal ADB and Fastboot Folder in
C:\Program Files (x86)\Minimal ADB and Fastboot (This is to make it more easier you can delete the files
after flashing).
4. Switch off your device.
5. Put your device in Fastboot Mode by Pressing Volume Down + Power button at the same time.
6. Plug in the USB.
7. Now Shift + Right click in minimal ADB & Fastboot Folder --> Open Command window here.
8. Type fastboot devices to check the devices is connected properly. If it is it will show like this.
http://c.mi.com/thread-334-1-0.html 2/6
1/23/2018 Flash Fastboot ROM through Command Prompt. - Flashing Guide - Mi Community - Xiaomi
Press Enter
Press Enter
10. If you wanna completely erase user data and make your device as a newly bought device excute the
following commands after the above four commands.
fastboot reboot
Your device will now reboot and should be completely back to stock as well as be unrooted.
Cheers.!!
Nilai
Moderator Great tutorial! This will help a lot of people. Especially for the ones who have less knowledge
about command prompt flashing.
http://c.mi.com/thread-334-1-0.html 3/6
1/23/2018 Flash Fastboot ROM through Command Prompt. - Flashing Guide - Mi Community - Xiaomi
★★★
President,
MiFC Bangalore
blog | twitter | youtube Posting Penulis
Thread baru
paramgagan | #2
Pilihan
Super Great tutorial
moderator
Piyush Nagpal | #4
SumUp | #5
http://c.mi.com/thread-334-1-0.html 4/6
1/23/2018 Flash Fastboot ROM through Command Prompt. - Flashing Guide - Mi Community - Xiaomi
2016-06-15 15:37:07 Replies Report Nilai
Posting Penulis
Thread baru
Pilihan
Mi FC
President 1544150509
Never tried
Try it out then. No flashing error will pop up.. 101% sure flashing.. :)
BESTINWORLD | #7
Srikar | #8
ATHUL P | #9
Posting Penulis
Thread baru
When saving files like recovery image and flash application, try to avoid spaces between
words in folder names.
Berikutnya
1 2 3 4 5 6 7 8 9 10 ...12 Go to page 1
Mode lanjutan
Masuk Daftar
Copyright Co
http://c.mi.com/thread-334-1-0.html 6/6