Académique Documents
Professionnel Documents
Culture Documents
700 SERIES
FEATURES
These models offer a variety of functions, sizes, voltages and • Low power consumption.
customizable options to fit most applications. Ideal for OEMs,
contract manufacturers, and panel makers for monitoring equipment • UL and CE recognized.
usage, scheduling maintenance, warranty validation, rental/
leasing use and more. Used extensively in industrial, agricultural,
military & specialty vehicles, as well as applications such as:
vending machines, medical & office equipment, fuel pumps,
and consumer products.
www.curtisinstruments.com
700 SERIES
700 P N - 0 0 0
700 (6-digit) P - 5mm R - Wired Reset 0 - AC/DC 0 - 5-12 VDC nom (4.75-15 abs) 0 - No Reset, No Backlight
Hour Meter digits N - No Reset (700 only) 6-12 VAC nom (5-15 abs) 2 - Reset, No Backlight
P7(2)- 7mm 1 - DC only with 1 - 12-48 VDC nom (9-60 abs) 4 - Reset, External Backlight
701 (6-digit) digits wired Enable 20-60 VAC nom (15-75 abs) 5 - No Reset, External Backlight
Hour Meter for Hour/Count
(701&703 only) 2 - 48-150 VDC nom (36-185 abs) H - Reset, Internal Backlight (3)
100-230 VAC nom (75-287 abs) J - No Reset, Internal Backlight (3)
703 (6-digit) 2 - AC/DC with
Pulse Counter wired Enable 4 - 12 VDC only (9-15 abs)
(701&703 only) Backlight Options 4 & 5 only.
NOTE: (1) All external backlight configurations - require 12 VDC (only) connection to illumination pin.
(2) 7mm models - Backlighting only available as External.
(3) Available only in 5mm & with voltage option 4 only.
708 P R -xxxx
Model Number (& Function) Digit Height Reset Control Options Sequential Specification
708 (6-digit) All Models Model 708/721
Consult Curtis for: display format,
Dual Channel P - 5mm digits R - Wired Reset voltages, connection termination,
Maintenance/Hour Meter for Maintenance backlighting, pre-scaling and pro-
or Trip Display
gramming options.
720 (7-digit)
Single Channel
Odometer Model 720
R - Wired Reset
721 (7-digit)
Dual Channel
Odometer/Trip Odometer
pg. 2
700 SERIES
Input Signal (AC/DC) Hour Meter Models 701, 708 - Power must be applied for 0.5 sec, min, to accumulate time.
Counter Model 703 - 1 Hz max, 50% duty cycle (500ms low, min, between consecutive highs).
Reset All Models Main power must be applied for a minimum of 0.5 sec. prior to reset signal.
Models 700, 701, 703 50ms, min, at operating voltage.
Model 708 Maintenance 2 or 4 sec, factory programmed; hour meter not resetable.
Model 720 70ms min at operating voltage.
Model 721 Trip channel 2 or 4 sec, factory programmed; odometer is not resetable.
Note: Max Reset frequency is 150Hz for AC models.
Notes: 1. All modules are supplied with critical components exposed. If the module is being used in an environment other
than specified, the user must take precautions to package the module to provide adequate protection.
2. For proper mechanical support, all module pins should be soldered to the PC-board.
3. To prevent heat damage to components, module face should be 10-20mm minimum away from PC-board
when flow soldered.
pg. 3
700 SERIES
Operating Voltage 700, 701, 703 700, 701, 703 708, 721
at Power Terminals (5mm) (7mm) (5mm)
DIMENSIONS mm
MODELS 700, 701, 703 - 5MM DIGITS
15.0 31.0
25.0
2.0 .8
Non-Backlight
P N
15.0 31.0
9.0
25.0
COMPONENT SIDE 14.02.018.0 .8 7.7 15.4
P N
R I 9.0
COMPONENT
2.0 SIDE 14.0 18.0 7.7 15.4
.80 3.6
28.0 TYP 4X MAX COMP 4.7
R 32.0 I HEIGHT
2.0
.80 3.6
28.0 TYP 4X MAX COMP 4.7
32.0 HEIGHT
Backlight
pg. 4
9.0
14.0 18.0 (.35) 7.7 15.4
COMPONENT SIDE
(.55) (.71) (.30) (.61)
Models 700,
R 701, 703 - 5mm Displays
I
2.0 (.01) 3.6 (.14)
700 SERIES .80 (.03) MAX COMP 31.0 (1.22)
28.0 (1.10) TYP 4X HEIGHT "L" 4.7 (.19)
25.0 (.98)
32.0 (1.26) 2.0 (.08)
.8 (.03)
P N
DIMENSIONS mm continued 9.0
14.0 18.0 (.35) 7.7 15.4
MODELS 700, 701,COMPONENT
703 - 7MM DIGITS
SIDE
(.55) (.71) (.30) (.61)
Models 700, 701, 703 - 7mm Displays
R I
2.0 (.01) 3.6 (.14)
33.0
.80 (.03) MAX COMP
28.0 (1.10) TYP 4X HEIGHT 4.7 (.19) 31.5
32.0 (1.26) 1.6
P N
Model5.3
720 11.1 37.6
27.9 1.8 3.8 MAX
COMP 38.6
Typisch,
5 mal HEIGHT
1.5 42.67 16.9
R. 1.65
15.0 31.0 TYP 2
39.62 PLACES
1.5 25.0
0.8 2.18
P N
Model 720Model 708 8.89 Model 721
14.73 15.24
17.78 0.80 TYP 4 6.60
PLACES
1.5 R 42.67 I
R. 1.65
38.139.62 3.51 MAX 15.0 31.0 TYP 2
COMP 8.38 PLACES
1.5 HEIGHT 25.0
0.8 2.18
P N
Model 721 & 708 8.89
14.73 15.24
17.78 0.80 TYP 4 6.60
43.2 PLACES 32.0
1.8 R I
39.6 25.0 R1.8
1.9 25.0 TYP 4
3.51 MAX 0.8
38.1 PLACES
COMP 8.38
HEIGHT
0.8
22.4 TYP 5 PLACES
18.5 9.6 19.2
Model 721 & 708
43.2 32.0
1.8 3.6 MAX
39.6 COMP 25.0 8.4 25.0
R1.8
1.9 HEIGHT 0.8 TYP 4
PLACES
Note: Standard pin lengths are shown. Optional lengths are available.
0.8
UNLESS OTHERWISE NOTED, ALL TOLERANCES ARE
TYP.25 mm
5 PLACES
18.5 22.4 19.2
9.6
3.6 MAX
COMP 8.4
HEIGHT pg. 5
33.0
31.5
1.6
P N
Model 720
1.5 42.67
R. 1.65
15.0 31.0 TYP 2
39.62 PLACES
1.5 25.0
0.8 2.18
P N
8.89
14.73 15.24
17.78 0.80 TYP 4 6.60
PLACES
R I
43.2 32.0
1.8
39.6 25.0 R1.8
1.9 25.0 TYP 4
0.8
PLACES
is a trademark of Curtis Instruments, Inc. Specifications subject to change without notice ©2014 Curtis Instruments, Inc. 50023 REV H 9/14
pg. 6